Resume - Certified Welding Inspector CSWIP 3.1

Misco Jobs

Resume #88042

CONTACT INFORMATION:
View contact information...

Date of birth: 1980
Marital status: Single.
Citizenship: Azerbaijan Republic

Education:

September 2001-July 2003 Azerbaijan State Oil Academy
Master of Science: Equipment of machines. Senior project: Electrical telpher by carrying. Capacity32 kN

September 1997-July 2001 Azerbaijan State Oil Academy
Bachelor of Science: Equipment of machines. Senior project: Special bearings.

Special Courses

May 2009 TWI Ltd., Welding Inspector Certified CSWIP 3.1
(Inspection in fusion welding in accordance with requirements published in Document CSWIP-WI-6-92)

CSWIP CERT No 39674
Date of expiry: 8 May 2014

Note: certificate verification on webpage http://www.cswip.com/verification/index.jsp

March 2008 Permit to work courses
Training in the theory and practice of BP AzSPU Control Of Work (C.O.W.)

May 2006 Bureau Veritas course "Visual Welding Inspectors" based on API standard 1104, ASME section IX, ANS/AWS D1.1.-98,
Certificate No.: BV/WIP/01/001 Date of issue: 01/05/2006 Date of expiry: 01/05/2009

February 2004 Training course attendant – Welding inspector (Petrofac)
February 2004 Various HSE courses and training registered in the HSE passport

Employment History February 2004 – up to present

ENCOTEC "Engineering & Consulting Technologies'' Company

Position: QC Welding Engineer

Whilst not on site projects, as a permanent employee of Encotec, my time was spent in the company workshop facilities on preparatory work for assigned projects.

Projects involved:

August – up to present AZERBAIJAN

March-August 2009 AZERBAIJAN

June – December 2008 AZERBAIJAN

Project: BTC EXPANSION PROJECT 1.2
Construction, installation and testing in respect of the DRA Injection Facilities at PS-A2 (Stainless steel piping for DRA (Drag Reducing Agent); Erection of DRA storage shelter)
Concerned Parties: "British Petroleum", "Encotec" Position: QC Welding inspector

August – November 2007 AZERBAIJAN

Project: Design & Construction of Tank Truck Loading/Unloading Facilities
1. Sangachal Terminal HDPE Pipeline for Loading Gantry (11" & 8"; 1 km)
2. KARASU Produced Water Transportation Project. Unloading Gantry & Pump Station

Concerned Parties: "BP", "Encotec" Position: QC Welding inspector

May 2006 – January 2007 GEORGIA

Project: SCP 30" GEORGIAN GAS OFF-TAKE PIPELINE PROJECT (12km)
Concerned Parties: "BP" & "Encotec"

Position: QC Welding inspector certified by Bureau Veritas. "Visual Welding
Inspectors" course. Certificate No.: BV/WIP/01/001

August – December 2005 AZERBAIJAN

Project: AZT/BTC 001 Sangachal Interconnecting Pipeline (30 inches, 12km)
Concerned Parties: "BP" & "AzerTrans", "XDNQT", "Encotec"
Position: QC Welding inspector

March – July 2005 AZERBAIJAN

Project: EXM-AZT Sangachal Interconnecting Pipeline (16 inches, 12km)
Concerned Parties: "Exxon" & "AzerTrans", "XDNQT", "Encotec"
Position: QC Welding inspector

February 2004 – March 2005 AZERBAIJAN

Project: AGT"BTC Pipelines and Facilities Installation Project", PS-A2 (Yevlakh) & IP-A1 (Kurdemir)
Concerned Parties: "BTC", "SPJV-Spie Gapag-Petrofac International", "MCG"
Position:
-Construction manager assistant
- Assistant to Welding Inspector
- Welding Document Control

Duty during of assigned projects
* Oversee, Inspection and manage piping, pipeline and structural construction works from conception to completion accordance with BS EN 1011, ASME 31.3 (CS, SS), API 1104, AWS D1.1, GOST.
* Material inspection, compliance with mill certificates according with ASME B 31.4/31.8, API 5L, BS 5950, CR ISO 15608, etc
* Preparation and Qualification of WPS and Welders' qualification accordance with BS EN ISO 15614, ASME 9, API 1104, EEMUA 158 & BS EN 287.
* Fit-up of structures; preheat control, welding parameters as per WPS.
* Visual inspection of welds (SMAW, GTAW) as per mentioned standards and co-ordination of correct NDT.
* Generate inspection reports as per requirements
* Qualification (calibration) of equipments (welding sets, clamp meters, ovens, quivers etc.)
* Control over the subcontractor's work-welding, pipe spool erection and installation, hydro test, pigging etc
* Preparation for hydro (pneumatic, flushing, leak) test curing out, namely: documentation, calibration certificates, pre & post test line walking, preparation test packs for each piping line, and check punch list for NDT clearance, installation of PSV, monometers, pressure hoses and pumps and parameter check during the test (pressure, temperature).
* Daily audits of welding processes and consumable stores as per manufacturer requirements.
* Review and sign off final dossiers of completed jobs

Additional information:

Languages capability: English (oral and written)– very good, Azeri – well, Russian – excellent.

Computer Skills: AutoCAD (draftsman experience), Windows operating system, Microsoft programs, Internet search.

Driving license: Category – B (9 year practice).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6001 to 6050 of 10902)

Go to Search Parameters...

Brief Description

Lifting Equipment Inspection Engineer, Senior Welding Inspector, Material Inspector, Product Inspector.

working at height,confined space,stress management.

Self motivated and result oriented person having a sound knowledge in Mechanical Engineering, having a positive mindset towards hard challenges and confident to resolve the technical complications in Piping Designing effectively and economically and utilizing the skills and proficiency for the mutu

Having good presentation and training evaluation skils. felid experience as safety advisor in Oil & Gas offshore construction industry based in Dubai.UAE. Having engineering functional background . Can independently handle the safety and training activities. Specialised in NVQ competemcy assessment

Working as a process controller in sterlite industries india Lts incorporated VEDANTA group.Have a good knowledge in Oil& Gas unloaing and process,water treatment plant ,RO Plant,DM plant ,Compressed air operation (Plant & instrument compressors) ,Oxygen plant operated through DCS

Responsible for Civil / Structural works of assigned Projects for both Oil & Gas Industry and Commercial/Residential or Mixed Used Projects.

Certificate in Telecommunication(Kolej Latihan Telekom Kuala Terengganu)

Degree Bachelor of Science in Mechanical Engineering

Welding , QC , WPS , PQR , WQP, Inspection , NDT

Information Technology Vicepresident / Manager / Director / Project Manager

Journeyman Machinist 30 yrs.experience mechanical maintenance in oil and gas industries, mining, pulp and paper

Instrument/Process Control engineer with more than 17 years of experience in Plant/Project engineering, construction and commissioning of Gas/Condensate and petro chemical industries.

Over 25 years of progressively responsible experience in environmental program management, marketing, managing and performing site characterization studies, feasibility studies, remedial alternative development and implementation for numerous oil and gas sector projects in the US and internationally

17 years experienced engineer

More than 22 years (16 years in India and 6 years in Saudi Arabia) in Electrical Power/Substation/ Managerial/ Electro-Mechanical /Petrochemical/ Geographical Information System (GIS), fields.

Briefly I offer services pertaining to quantity surveying both as a PQS and Contractors Qs. That includes for duties such as Preparation of contract documents, Preparation of Bills of Quantities, Bid Administration, Cost Estimating, Cost Planning, Procurement, Measurements, valuations and Claims.QUA

In Geotechnics I ensured the supervision, the control and the establishment of design reports for several geotechnical investigations of large civil structures in soft and hard grounds : special foundations, retaining structures, soil improvement and reinforcement by geosynthetics' products,

hi me working UAE Borouge plant

I have had many experiences in Oil & Gas projects, such as pipeline, Gas Compressor Station, LPG Plant, and CO2 Removal.

Marine Electrical Engineer

I am having 9 years of experience

Geologist and expert of GIS/Remote Sensing and Digital Image Processing

To deliver first¡Vclass information technology solution to clients and the world at large, And also to obtain a challenging and satisfying job with drive, utilizing my educational skill and experience in Electrical and Computer Engineering

Entry level

Exploitation operator level 2

7 years shipyard work experienced Senior Ship Manager

I have completed my B.E in metallurgy and materials from Mehran UET Jamshoro .Sir i am fresh graduate looking for job

Courses and trainings: Bosiet – trainings in The Netherlands – Falck Nutec Rotterdam: 06.10.2006 - 06.10.2010 – Air Pocket Plus, 06.10.2006 - 06.10.2010 – Basic Safety and Emergency Preparedness, 06.10.2006 - 06.10.2010 – Basic Offshore Safety Introduction, 06.10.2006 - 06.10.2010 – Basic Offshore

I am career driven and goal oriented person. My aim is to work hard and maximise my employer turnover and at the same time achieve my vision.

Qualification: Higher National Diploma in Microbiology Skills: Grammar fluency, initiative, receptiveness, physical and mental alertness,good team player,good communication and interpersonal skills

I have 32 years of experience in the oil and gas industry. I have been an Operations Manager for 15 years and have managed fields in 7 different states.

Construction Civil Superintendent (Earthworks, Infrastructure and Concrete)

Advanced diploma holder of the city and Guilds of london institute in mechanical engineering. Maintaining a high standard of performance on assigned machines in terms of minimizing the number of breakdowns that occur, and the amount of unplanned downtime that is incurred

BS Geology, wth leadership capacity,mangemental skills and sound(audio) technician

Adaptable and ambitious graduate in Mechanical Engineering with proven experience,skills and a fundamental understanding of Engineering. Able to lead others in demanding circumstances. Self motivated, hard working individual. In-depth understanding of technologies. Proficient user of word processing

Driller/Directional Driller Wellcap,H2S,Firstaide/CPR

New grad in mechanical engineer

Mineral Title, Permit Title, Flowcharts, Ownership Reports, Mapping, Deed Plotting

Analytical, Innovative and Resourceful. Posses Leadership Skills and Result Oriented. Excellent Interpersonal, Presentational and Communication Skills. Excellent Listening Skills, capable of working effectively in a team and have ability to handle challenges with ease. Proficient in the

I am a fresh,sensational,young graduate full of aspirations ready to yield the initiatives,innovations and creative abilities bestowed on me by very proficient scholars of distinguished characteristics during the course of my studies back in school.

15 years of hands on experience in erection, commissioning, troubleshooting, overhauling, preventive maintenance, shutdown maintenance of rotary and static equipments in the Mechanical field, Alignment, Assembling of Mechanical seals etc.

Self-correspondence, good computer skills, good filing and record system, good communication, Administration skills, Customer Service & Coordination, Customer Grievance Handling, Generating Reports and Audit Assistance

all types of welding, vessel, tanks, erection and fabrication, piping and structure, all solutuions of welding requirements,

Certified Welding Inspector CSWIP 3.1

Have a strong :Managerial and technical skill, leadership skill, agent of change, interpersonal and intrapersonal skill, Communication skill, Good motivator, Familiar with API and ASME Codes Standards, Familiar with P&ID, Familiar with ITP, Familiar with Rotary and Static Equipments, Installing Rota

Seasoned professional sourcing, procurment Manager with 19+ yrs experiences with Fortune 10 company and others in Middle East and South East Asia.

Master of Science in Chemical and Process Engineering

For Programmer five of Programmer with my specification in VB, ASP, PHP. For Analyst fourth of Analisys systems with Data Oriented and OOA and UML Lecturer so one of Lecturer spesification AI, Neural network and OOP

Lab Technician MSc Organic Chemistry Karachi University 2004 & Computer Literate MS Office-97

QC Inspector-Multi-discipline / on Various oil& gas Projects

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 [ 121 ] 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out