Resume - Rigging & Lifting Supervisor, Health & Safety Advisor, looking for work in the c...

Misco Jobs

Resume #88268

CONTACT INFORMATION:
View contact information...

David Lewis

(HSE Advisor/ Rigging & Lifting Supervisor)

I have been employed in the construction industry for over thirty years during this time I have undertaken both onshore and offshore projects primarily in the Oil & Gas, Refinery and petrochemical sectors, and more recently power generation & energy.

My skills Include: (Safety)

* Carrying out risk assessments and looking at how risks could be controlled, reduced or eliminated, auditing of on and offshore plants, platforms, operations, suppliers, contractors, civil and site facilities
* ƒnƒnƒnƒnƒn Carrying out training programs in rigging & lifting procedures and developing LOLER lifting plans & risk assessments for routine, simple, complicated and complex lifts in accordance with TI-014.
* planning practical and effective solutions and helping to improve safe working practices, writing and editing of detailed reports, specifications, procedures and audit protocols
* In-house training with managers and employees about health and safety issues bringing contractors up to date with health & safety policies, rules and regulations, including CDM regulations.
* Adopting best practice on site, ensuring work is conducted in compliance and in line with ISO 1401, 1901, 2000 & 0HSAS 18001, standards and comply with COMAH & IADC regulations
* Carry out work offshore in accordance with EP Europe and Sigma 3 HSEQ systems, participation of HAZOP, HAZID & ISO 9001 studies, review and collation of safety control documents and drawings
* Carrying out accident investigations on sites and producing subsequent reports and recommendations, and any near miss / hit reporting and feedback to supervision & management.
* Keeping records of inspections findings and producing reports suggesting improvements where necessary, assisting managers and supervisors with any health & safety issues
* outlining of safe operational procedures which identify all relevant hazards and accurately assess risks

* Ensure the safe installation of equipment, plant and machinery, and the interface of safety related concerns.
* Develop preventative and remedial programmes of health and safety & welfare on site, including training and induction.
* Advising and training a range of specialist areas, e.g. Control of work, isolation, accident investigation, fire regulations, manual handling, hazardous substances, noise, safeguarding machinery, working at height, confined spaces and occupational diseases, asbestos awareness

CURRICULUM VITAE

HSE Advisor / Rigging & Lifting Supervisor

Personal Details

Name: David Lewis
Address: 10 Dolphington Avenue
Richmond Gate, Oatlands
Glasgow, Scotland G5 0HY
United Kingdom

D.O.B. 23rd April 1962
Tel: +44 (0)141 429 8656 Home
Mobile: +44(0)793 0672664
Email: Davielew@aol.com

Dependants: Wife 2 Children
Nationality: United Kingdom
Nat. Ins. No: WM 46 66 10 A
Passport No: 01367000
Seaman's Discharge Book No. U.K. 103711

INDUSTRIAL & PROFESSIONAL CERTIFICATES HELD

NEBOSH Health & Safety General Certificate
BSc Degree in Construction Engineering
N.V.Q. Level 3 Rigging & Lifting Supervisor QRG30/2
I.O.S.H. (Institute of Occupational safety & Health) 102390 affiliate member
E.C.I.T.B. REF: QRG 30/2 C.I.T.B. 0059191 Grade 6 Rigging Supervisor / Steel Erection
NSL Rigging & Lifting training cert appointed person-trained trainer.
Appointed Persons Course, Lifting & Rigging Operations (May 2009)
L.O.L.E.R. / May 2009
Offshore Crane Operator (stage 3) (Sparrows Offshore)
OPITO Offshore fire fighting & Sea Survival, H2s Training, SCBA training
Scaffold inspection, Hygiene & food handling, Due Diligence, First Aid,
Environmental Impact, Environmental Management, Waste & Waste management managing safely certificate, Risk Assessment ¡V HAZID & HAZOP, mindset training

Driving License LEWIS 604232 D99JV
Certificate of Incorporation of a Private Limited Company 30th March 2006
Vaccinations up to date covering most countries including, yellow fever, typhoid, and hep A,

EMPLOYMENT HISTORY

June 2007- Sept. 2009 Alstom Power services, Intec U.K. (Safety Engineer) U.K.

May 2007 June 2007 DATS International, Liverpool (Safety Advisor) U.K.

Jan 2007 to April 2007 Offshore Marine Services Aberdeen (Safety Officer SFO) ANGOLA

Aug 2006 to Dec 2006 Shanahan Engineering Dublin (HSE Advisor) U.K

April 2006 August 2006 North Sea Lifting Aberdeen Site Competent Person (Rigging) GEORGIA

Feb - April 2006 Global Resources Aberdeen (HSE Advisor) U.K

November 2005 Microtec-Air Basildon Essex (HSE Advisor) MALTA & U.K

April 2005 - Nov 2005 Cape East Industrial Services Malta Shipyards Valletta.
Rigging Consultant / Safety Advisor MALTA

March 2005 U.K.P.S. Ltd Offshore Lowestoft Suffolk (Rigging Supervisor) U.K.

Nov 2004 Dec 2004 Aker Kvaerner, Aberdeen (Rigging Foreman) U.K.

March 2004 Anglo European London (Rigging Supervisor) IRELAND

February 2004 AMEC Ltd Aberdeen (Rigging Foreman) NIGERIA

November 2003 WOODGROUP Ltd, Aberdeen (Rigger) U.K

August 2003 ¡V October 03 C.CREW (Smit Ltd) Aberdeen (Rigging Supervisor) SPAIN

June 2003 August 03 BRIGGS MARINE, Burnt island Fife. (Rigging Supervisor) U.K

March 2003 ENGLISH PARTNERSHIPS LTD London (Rigging Supervisor) U.K

November 2002 FUSE INTERNATIONAL, Basingstoke, Hants. (Tower Rigging Supervisor) U.S.A.

May 2002 to Aug 2002 SOUTH SEA INSPECTION (Rigging/Erecting Supervisor) SINGAPORE

January 02-April 02 P.C.T.GROUP Dalsetter Avenue Glasgow, (Rigger Supervisor) ANGOLA

Jan 2000 December 2002 FUSE INTERNATIONAL, Basingstoke Hants. (Tower Rigging Supervisor) UK & USA

Dec 99 - Jan 2000. SMIT INTERNATIONAL Rotterdam, N.L. (Rigger / Crane Op) U.S.A.

For a complete and comprehensive resume detailing my full work history please do not hesitate in contacting me.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 10924)

Go to Search Parameters...

Brief Description

SENIOR E & I ENGINEER (EPC Project Management - Construction & Commissioning / QS / Contracts Administration / Procurements / Recruitment ¡V field of Electrical & Instrumentation, partly Mechanical & Civil)

Over 15 years working experience in private sectors and International Organization as Executive Secretary to expatriates, Human Resources Officer, Procurement Officer, Interpreter/Translator and Project Assistant.

I have fourteen (14) years post qualification experience: with about ten (10) years experience working on International Projects (in the Oil and Gas/Energy industry), working as a Management Consultant providing high-end business value consulting services and solutions.

Lokking for a Inspector Job

MS degrees in Management and IT, a member of Canadian Council of Information Technology Professional (CCITP) , more than 10 years of experience working as SME-EPM,Head of IS, MIS Specialist, in-depth knowledge of Project Management, BPR, Quality Management with good problem solving and people skills

I am a Maximo Implementation and Upgrading Consultant.

A total of sixteen (16) years of working experience (thirteen years were in the oil/gas and petrochemical construction projects in the Gulf Region. A computer literate and proficient in oral and written English skills. Experienced in civil, building , steel structures, fire proofing and piping works

Oil and Gas Operations Mnagement

20 years experience in drilling operations

Experience in DCS, PLC, applied to Process Industries and Power Plants. Exp/ with logic diagrams, erection and commissioning,P&ID, MCC, specifications, studies and cost estimation.

Reservoir Engineer specialized in Simulation

I have 33 plus years of maritime engineering experience. Over 18 years of this is offshore/oilfield/maritime experience as Chief Engineer, Maintenance Engineer. I have an ability to work safely and efficiently, without direct supervision, I use initiative to solve difficult problems and work well as

Thorough Knowledge of operation of Laboratory sophisticated instruments like XRF,GC,HPLC,UV Spectrophotometer, FTIR, MFR Tester, K.F titrator, Hunter Lab Colorimeter, Cast Film Extruder, Blown Film Extruder, Density Gradient Column, D.S.C, Capillary Rheometer etc.

M.E in Instrumentation Engineering with 17 years Oil & Gas Project design, Detailed Enginerring, Construction & Commissioning .

A medical doctor with long years of experienced on the rig,company ,ship,clinic and hospital seeking employment.

Over 33 years of working experience within India and abroad as electrical superor, senior electrical foreman, commissioning engineer, Elelectrical specialist.and Specialist Consultant.All the 33 years Maintenance ,Commissioning and Consultant for CMMS and Mtc Optimation Projects in oil,power Indys.

Posses degree in Geology. Familiar with Microsoft Work, Excel, Power Point, Project , Landmark Geosciences Workstation(Good), Petrel (Good), Well Kill Sheet Program(Good), Drill bit hydraulic software(very good), Mud logging software setup(good) and trouble shooting.

Chemical engineer with twenty four years of total experience in the Oil & Gas, Oil Processing and Petrochemical industries. I have rich experience in project engineering, design supervision, multi-discipline engineering co-ordination, contract management, commissioning supervision and construction

Mud engineer with 24 years of experience, on land and off shore, made all types of mud, OBM, SBM and WBM

Twenty-Seven years work experience primarily in Mechanical, Process Piping Design, Civil/GIS, CADD (Computer Aided Design Drafting) and CADD Management. Broad based as well as extensive expertise in Engineering Applications and Software Systems.

I am graduated from Algerian Petroleum Institute as an Enginer in petroleum geology (5 years graduation). I was involved in geological interpretation for prospect generation from 1995 to 2000, since then I have been focusing in geochemistry and basin modelling (1D, 2D and 3D) regional studies.

PROJECT MANAGEMENT

Quality, Health, Safety and Environment Manager - Offshore and Onshore

Free! Background and extensive experience in HES regulatory requirements through all stages of execution in major capital projects including Concept Design, FEED, Detailed Design, Construction / Fabrication and Hookup and Commissioning. Have 28 years of experience in the oil and gas industry which also i

Supply Chain and Procurement Management

Well Test Engineer

Experienced Professional Mechanical Engineer with 17 years diverse professional experience in Oil & Gas Industry - Project/Design/Operations Engineering, Rotating & Static Equipment sizing and selection, Commissioning Activities, and associated technical skills.

Instrument engineer supervisor material control supervisor

Individual expert in Surveying - Topography - Land registration - Remote sensing – GPS – Cartography - GIS agreed by the European Commission

Visual Foxpro RDBMS Programmer LAN Environment / Technician / CAD 3D Designer

I am a Civil Engineer, Internal Auditor & shortly being certified as Lead Auditor by IRCA.

Results-driven manager in diverse supply chain, purchasing and sourcing areas.

Well Integrity Specialist, Completion Production Engineer

I offer many years of experience in the Petroleum Reservoir Engineering field. I have expertise in reservoir engineering management and consulting, reservoir integrated studies, well testing/pressure transient analysis and decline curve analysis

Oil Industry exp: 28 YRS, CITGO/Consulting Downstream/Upstream/Latin America/Pricing. Objective: Pricing Manager, Business Development Manager, Head Economics Dept., Refining(Tech/Fin), E&P(Fin)Invest. Bank.

1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu.

EEHA and Hazardous Area Expert - Seeking FIFO - Remote Area Work

Administrative and Technical support Telecom, Electrical, Electronics and Instrumentation professional with 19 years of experience in India & Abroad, fast-paced environments demanding strong organizational, technical and interpersonal skills

Engineering Graduate with 19 years of experience in Sales & Marketing, Business Development, Operations, Supply and Distribution / Logistics, P&L Management of businesses involving Lubricants / Petroleum / Coatings offering Value added Solutions in Industrial, Power, Marine Segments

15+ years of various jobs with Foxboro DCS, and Triconex IPS/FGS Systems

I am a highly skilled Mechanical Engineer with over 18 years of experience in engineering (oilfield equipment, rotating equipment, wind energy) and general technology with PhD in Mechanical Engineering.

I senior completion and workover engineer 19 yeas experience

To further enhance career growth and inter-personal skills, To share technical knowledge with other colleagues, To take the challenge of having a wider responsibilities within a new organization.

An Oil & Gas Professional with 30+ years experience in all facets of Drilling and Completion

ISO 9000:2000 QMS-03 Lead Auditor IRCA Course No.17047 and Internal Quality Auditor (IRCA No. R141), Senior QA/QC Engineer, Certified Welding Inspector (CSWIP3.1), SNT-TC1A Level 2 for RT film interpretation / UT / PT and MPI, Piping, Blasting/Painting, Structural & Pressure Vessel Inspector. Expert

Rigging & Lifting Supervisor, Health & Safety Advisor, looking for work in the construction industry, freelance contractor

I am a Petroleum Engineering Technologist with 29 yrs E&P experience, the last 12 yrs have been with major Operating Companies in positions of; Lead UBD Engineer, UBD Project Manager, UBD Advisor and Drilling Supervisor. Available for a new project 30 Novembewr 2009.

20+ years piping field - 13+ years PDS

22 years oilfield experience. High pressure, horizontal pumpdown experience. Experience with both Open Hole and Cased Hole Logging and Perforating. 2.5 years overseas.

ISO 9000, ISO 14001, OHSAS 18001, ISO/TS 16949, TQM, SAP R3, FOURTH SHIFT, SPC

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out