Resume - I have 12 yrs cementing experince in UK and worldwide with the same company work...

Misco Jobs

Resume #88353

CONTACT INFORMATION:
View contact information...

PROFILE.
A flexible, adaptable and reliable person with supervisory skills in the Oil and Gas industry. Have a practical approach to work. Always likes a challenge and appreciates a job well done.

HISTORY
September 85' - January 93'
I was in the British army for 8 years has an Infantry soldier. I served around the world in different locations and also Northern Ireland for 2 ½ YEARS.

February 93' - February 94'
I was employed by Ellis and Everard. This company was based in Nottingham, Nottinghamshire, England. I dealt with driving and transporting chemicals to different customer locations. I had my ADR, forklift, and HGV 2 license to do this job

February 94' - March 96'
I was employed by Atlas Haulage Ltd. This company was based in Chesterfield, Derbyshire, England. I was employed to drive different HGV 1&2 vehicles all over the UK and Europe carrying various different items to different customers.

March 96' - November 97'
I joined an agency called Sawley Industrial. This agency dealt with HGV 1&2 drivers.
I dealt with a various amount of companies that wanted my services has an agency driver. I drove different types of HGV's and travelled all over the UK and Europe.

November 97' - December 00'
I was employed with BJ Services UK LTD. They where based in Tuxford, Newark, Nottinghamshire, England. I joined the company has an Equipment Operator 1.
While I was in Tuxford I learnt how to run cement bulk plant and cement bulk trucks which carry the cement to customer locations. After 6months I was learnt how to use the mobile cement truck. This system was called JET MIXING. I learnt how to do all the necessary paperwork that goes with the job. After 2years I progressed to an Equipment Operator 3 and had enough experience to complete a full cement job, which covers all the calculations and the pre post and post job work.

December 00' - February 01'
I joined an agency called Coiltec. This company employs different personnel for the Oil and gas Industry and is based in Gt. Yarmouth, England. I did not get any work from this agency.

February 01' - October 02'
I re-joined BJ Services UK LTD in Aberdeen, Scotland. I was employed has a Senior Equipment Operator 4(Offshore Cementer). I continued to learn the different aspects of an offshore cementer. I went to several offshore locations doing different cementing jobs. In October 2002 I was promoted to Service Supervisor 1.

October 02' – November 04
I have gained a lot of supervisory skills.
I have a good understanding of the H.S. & E offshore and participate in the STOP programs that are in place on all the different locations. I have done several permit to work programs. I have worked for Shell, B.P, CNR, Kerr McGee, Enterprise Oil and Nexen.
I have got reasonable computer skills.

November 04' – August 05
On November 16th I transferred to BJ Baku, Azerbaijan.
I have been working on an ACC II unit on land rigs for a company called Karasu Operating Company. I have the responsibilities of looking after all the cement equipment and equipment operators. My role also includes all the pre and post job paperwork and liaises with the company rep.

August 05' – June 06'
I transferred back to BJ Services UK LTD. I was promoted to Service Supervisor 2.
I was sent to work for Nexen and Kerr McGee on the Semi-submersible RIG JOHN SHAW on rotation 2weeks on/2weeks off. The equipment was a 35-8-5 ACC II RAM unit.

June 06' – May 07
I was promoted to Senior Service Supervisor.
I have been working for Nexen, Kerr McGee, CNR, and Lundin on several different oilrigs. I work with Halliburton, Dowell and BJ cementing equipment. On different rotation periods.

May 07 – Present
I left BJ Services Ltd on 4th May 07. I started a new job with Roemex Ltd as a Well Bore Clean up Engineer. My job includes supervising the cleaning of the well, mixing the required chemicals. My main responsibility is to make sure the well is cleaned to the correct specification. Also to follow the correct procedures for collecting and testing samples of chemical and completion fluid to a particular specification of the operating company. Also to complete the correct paperwork and all relevant equipment and samples are returned onshore.

DUTIES AND RESPONSIBILTIES
* Responsible for health and safety.
Ÿ Supervisory and training to operators.
Ÿ Writing reports and service tickets.
Ÿ Implementation of all HSE procedures.
Ÿ Responsible for the maintenance of all equipment.

EDUCATION AND TRAINING

June 80' - July 85'
I was in the Dukeries Comprehensive School, New Ollerton, Mansfield, Nottinghamshire, England. My subjects were Math's CSE grade 3,
English CSE grade 3, Biology CSE grade 3, and Home Economics CSE grade 2.

September 85' - January 93'
Infantry soldier. I served in Northern Ireland for 2 ½ Years. I did two tours of Cyprus.
I did 2years on home defense. I did 6months in the Falkland Islands on peace tour.

January 93' - February 93'
I learnt how to drive a HGV 2 truck.

January 96' - February 96'
I learnt how to drive a HGV 1 truck.

April 98'
Basic Cementing level 2 course in Aberdeen. This course covers basic calculations and formulas.

November 01'
Cement Level 1 (Engineering Handbook). This course covers all the aspects that detailed in the BJ Engineering Handbook.

January 02' - February 02'
I went to the Houston, USA to do the following courses:
Offshore Skid Maintenance Operation 1 to 3. This covers all the aspects of the BJ 35-8-5 ACC unit and the maintenance program.
Offshore cementing level 3 (Advance cementing). This covers the complicated part of cementing including squeeze jobs and absolute volumes.

January 03'
I completed the downhole tool course in Aberdeen. This course covers the different type of packers, bridge plugs, and cement retainers.

January 04'
I completed a Leadership Safety Excellence course in Aberdeen.

June 04'
I completed a STOP awareness course.

May 07'
I Completed the Pan European Offshore Survival Course.

THE ABOVE COURSES COME WITH CERTIFICATES.
ALSO I HAVE FULL SVQ FOR PUMPING AND DOWNHOLE TOOLS.

HOBBIES AND INTERESTS
I am a very active person and like to keep myself busy. I like to do DIY at home.
I like to go swimming and occasionally go to the gym.

ADDITIONAL INFORMATION
I am a non-smoker and in good health.
With my current work I keep quite fit.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9051 to 9100 of 10917)

Go to Search Parameters...

Brief Description

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

20 years - Electrical Trade Background, 4 years - Reliability planning-scheduling Oil & Gas

Excellent working knowledge in field of administration

Tendering & Estimation, Proposals Preparation, Contracts Engineer

Fourteen years of consistent and solid work experience in the field of Instrumentation, out of which the past ten years are in the Middle East. Certified in Instrumentation Mechanism by the Government I.T.I. from T.R. Pattinam, Karaikkal, Pondicherry, India during the year 1990-92.

Achieve sustainable profit growth and customer happiness using technology to reduce costs and increase effectiveness of employee time.

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Electrical Engineer / Site Engineer / Supervisor / Draftsman

Quality Control professional

Safety Technician

Rotating & reciprocating equipment technician

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Crane Operator/Deck Foreman, Level III, HLO, Supervisor, Safety Rep

Research Experience: Polymer solutions and adsorption behavior.

I am looking to expand my knowledge and experience in the oil and gas industry, I have 5 years exp. as a well service floorhand and relief derrick hand. I am interested in Offshore drilling or related jobs.

Mechanical Engineer

I am looking for entry level offshore work.

At the present time, I am working as assistant unit controller at PT. PowerGen Jawa Timur ( Private Power Project Phase II Coal Fired Thermal Power Plant 2 x 610 MW ).

To be a part of heighly esteemed organisation where working will be a chellange to my skills.

I have just attained a Diploma in Petroleum Engineering Technology and is presently pursing my B.Eng degree in Petroleum Engineering. I have also learned and applied Project Management to a variety of projects. Also, I have 6 months of both land and offshore experience in the Oil and Gas Industry.

25 years Industrial Construction experience as a Construction Manager, Superintendent, Project Coordinator, Estimator and Maintenance Planner.

fresher female engineering graduate having resident visa in qatar

Project Management, Supply Chain Management, Human Resources Management

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

Looking for Instrumentation and controls job

Consultant, Control Risks; Formerly Country Manager, Nigeria, The Olive Group, Chief of Security, diamond mine Zimbabwe, corporate security manager, Riyadh, security manager KPC Indonesia, Graphtan Tanzania, 23 years in British Army Int Corps, Worldwide experience in military security operations.

Site Controller / Accountant <<< Cost Controller

I would like to find a diversified employment opportunity where I can continue to learn and grow in both the drilling and completion/work over aspects of the oilfield.

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Looking to obtain Employment in the Oil & gas indusrty

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

MWD/LWD Field Service Engineer (4 yrs), Drill Bits Evaluation & Sales Engineer (2 yrs)

Residing in Kuwait for over 12 years, Excellent 8+ years of experience with US Forces operated in Kuwait, Iraq and Afghanistan. Highly competent contracts administrator with extensive experience administering multi-million-dollar contracts for major projects in the GCC & Middle East.

Electrical-Mechanical Engineer graduate from National University of Engineering with experience on electrical distribution projects and projects execution in the oil and gas industry. I have the ability to interact and communicate with all disciplines in the engineering field. I am competent in work

Technical assistance, as control system field engineer (speedtronic MKV specialist), during installation of two Gas Turbine model PGT-25-DLE compressor driving. Training, as control system field engineer during performance test of Steam Turbines and Centrifugal compressors also training course on Ga

3+ years experience in Oil Gas Document Control on long term Offshore/Onshore projects, dealing with contractual & subcontractor/vendor documentation Seeking a contract position, min. term of 6 months in a progressive position that will allow me to move into the field of Document Control Management

I am Electronics and Communication Engineer and I have more than Three and half years experience in marketing and business development in Dubai and Indian subcontinent.

I have been working as an Instrument Technician for 4 years in an Oil/Gas company.

Mud Engineer looking for work.

8 years of professional experience in Administration and personal assistance.

I am a qualified Metallurgy and Materials Engineer with international research and training experience. I am a person with strong organizational skills and am very confident in analyzing and solving problems with positive outcomes. My past studies in Metallurgy and Materials Technology and the resea

I have 12 yrs cementing experince in UK and worldwide with the same company working with different Oil companies. I also have well-bore cleaning experince for 2 years. I have dealt with Mud, brines and different cemeting fluids.

I am a qualified and experienced Medic or Paramedic and have vast HSE/Safety/OHS/QHSE experience and qualifications. I am also a qualified rescue technician and am very well versed in emergency co-ordinating.

Proficient in reading mechanical drawings and designing using Auto Cad, CATIA, NX-IDEAS.Strong Technical writing and presentation skills along with good hold in MS - Office.Master of Engineering (G.P.A - 10.33 out of 13)(2008- 2009)University of Windsor.

Summary of Qualifications: Proficient in this engineering software: 3D - PDS Equipment, Piping modeling/design,Isogen, SmartPlant Review, Microstation, AutoCad. Industries: Nuclear, Energy, Power, Petroleum / Refinery, Chemical, Logistics, Transportation, Manufacturing and Defense.

Electrical & electronic engineer with two years training & experience in oil & gas sector

I am working as welding inspector in oceanreeng ois project Ras Gas. And befor date of 28 april 2007 working with EIL project Burj Dubai Development & GRAVITY BASE STRUCTER IN DUBAI DRY DOCKS.

PDMS and AUTO-CAD programe

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 [ 182 ] 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out