Resume - I have a lot of experience in drilling and drilling fluids.Desired position is F...

Misco Jobs

Resume #88383

CONTACT INFORMATION:
View contact information...

Executiv summary:
I am a highly experienced engineer in drilling and drilling fluids activities.In this period,I participated at the drilling activities of many wells for oil and gas with depth between 800-5000m,vertical,deviate and horizontal.I participated at training sessions and outside training courses organized by my companies.I managed to establish a good relations with customers,my crew members and all members of all companies involved in drilling process.

Work Experience:
2006-2009--Drilling Fluids Specialist II, M-I SWACO-Romania
Responsabilities:
Buiding and maintaining the best proprieties of drillind fluids during drilling and other ope-
ration at the wells.Running on daily basis,at well location,with the proper laboratory kits,all tests for the drilling fluid according to the A.P.I.standards.Issuing daily reports for the Benefi-
ciary and Drilling Contactor,as required.performing recaps,inventorying productsand costs,re-
ordering and re-stocking needed materials and chemicals.Determining,recommending and co-
ordinating the necessary treatments for fluid maintenance within the design parameters.Provi-
ding technical support and good level of communication with M-I Swaco customers.Respond to variation in mud condition in a timely and professional manner.Acting according with local and internal QHSE rules.Providing computerized consulting regarding the fluid hydraulics(
rheological features,pressure drops etc.),daily variation of fluid parameters,chemical consum-
ption and costs recorded over the entire duration of the operation.Monitor mud consumption and respond to downhole mud loses in a timely manner.Conduct well lolcation pilot testing for unusal mud treatments,or as required by Company well location supervisory staff,to avoid unsuitable or potenyially damaging or incompatible additions to the circulating system.Pro-
active engineering of the drilling fluid system.Prepared Final Well Report as required.Buid strong relation with team members in field.

2005-2006—Drilling Supervisor, NABORS DRILLING-Oman branch
Responsabilities:
To supervise and ensure work progresses in accordance with company approved drilling programs.Implementing the company's procedures and new technologies in field.I have promoted continual monitoring and structured improvement of performance and efficiency.

1999-2005—Drilling Supervisor and Safetyman, PETROCONDUCT-Romania
Responsibility:
Perform and supervise drilling operation on the rig following the required standing in-
struction/procedures.To manage,directed and motivated-assignet team to ensure efficient, timely and safety execution of planned activities.To implement thje Company's HSE policies in field.

1991-1999—Rig Manager, DRILLING WELLS COMANESTI-Romania
Responsabilities:
I was responsible for all paperwork generated at the rig.I also ensured that the operation comply with company policies and government regulations.During this period I made arran-
gements to prepare areas for driling and also organized the setting up and dismantling of rigs.
I have monitored the proper implementation of drilling programs.Ensure that the rig operation are well documented and related reports are issued.Responded to emergency and non routine situations,provided required instruction and ensured that appropriate measures are implmen-
ted to reliefe the emergency situation.Ensure that work under my control is performed in a safe and environmentally sound manner.Continously strive to improve the performance of drilling operations,contractor equipments and service company resources under my control.
Build strong relation with team members in field.I was subordinated to the technical manager.

1988-1991—Toolpusher, DRIILING WELLS COMANESTI-Romania
Responsabilities:
I coordinate the work of one shift of drilling crew.I made sure that the rig operations are
Well documented and related reports are issued.Assured technical integrity of drilled wells.
To keep costs down and the equipments in good repair.Implement the company health,safety and environment policies,procedures and regulations.Subordinated to the Rig manager.

Education:
Petroleum-Gas University of Ploiesti, Drilling –Production Engineer Diploma
(1983—1988)
Proffesional training:
-IWCF Drilling Supervisor Certificate nr S37344RO4810164,Issue date:05.02.2006
-Nabors Drilling Training courses: Rig management system,First aid&CPR,Hydrogen
Sulphide,Fire fighting,Safety leaders'workshop,New employee orientation,RMS orien-
tation,Drilling competency,RMS modules,Rig start up,IADC rig pass.
-M-I Swaco Basic Drilling Fluid Technology Certificate,Issue data: 03.11.2006
-M-I Swaco IFE: Completion&Workover fluids,Waste management&treatment service
-M-I Swaco Training courses:Drive Smart,H2S awareness,Safety equipments
Obervations:
- Fluent use of Windows based PC software such as MS-Word,MS-Excel
-Foreign languages: English-good, French-good
-I have Driving License categories: B,C,Dand E
-A highly experienced leader and a communicative person

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 10884)

Go to Search Parameters...

Brief Description

Free! Pipeline Construction and Installation

Free! I am working as Toolpusher since 1999 then as SNR Toolpusher.I have experience in Land rigs,different types,Land skidding rigs type,Good HSE Attitude, To manage the personnel of different nationality.

Free! I have been a well site supervisor for the past 7 years for top companies in Canada / Duvernay Oil Corp / Shell International ( canada ). I have been working hard for the past 19 years to excel in the completion / workover / production, sector of the oil and gas industry.

Free! Geophysicist

Free! Dynamic business development and operations executive with 25+ years of experience and a history of delivering multimillion dollar P&L improvements by identifying and capitalizing on opportunities to win new business, reduce costs, and enhance processes / productivity. Strategic thinker.

Free! I am reliable, highly motivated leader, with over 17yrs experience in the drilling industry

Free! Knowledge and specialty in Versaclean Synthetic Oil Based Systems, Novaplus systems, Lignite/Lignosulfonate, KCL Polymer, Rheliant and Flo-Pro systems. Experience in exploration wells, directional, deviated, lateral as well as development wells. Experience with blowouts,and well control,

Free! Completion Supervisor for vertical and horizontal wells with 14 years experience

Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

I am an M.Sc Ph.D and had 26 years experience as Mud Cosnultant/Supervisor. Worked worldwide with amjor mud services providers. Presently available to work immediately any where in the world. Preferrably on rotational basis, however, not regid to stay at work place. looking for some senior position

Specialist in geophysical projects management, data acquisition /processing, AVO studies (processing / seismic attributes and tomographic inversions) / mapping and interpretation; multilingual practitioner and self-starter with diverse professional experience/ skills

I am having 24 years rich experience in Water Treatment that includes pretreatment, water filtration, demineralization plant, water softening plant, micro-filtration, nano-filtration, reverse osmosis and power plant water treatment that include O&M of condensate polishing units.

Experienced Ph.D Reservoir Compositional Simulation Engineer

CHIEF EXECUTIVE OFFICER / CHIEF OPERATING OFFICER / CHIEF FINANCIAL OFFICER

Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC

27-year career with Chevron, I was employed both as organic geochemist and petrophysicist. Experienced in openhole log analysis, integrating log and core data. Worked with all three major logging contractors. Experienced in LWD and wireline logs. Familiar with workstation and geolog.

I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.

30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.

C Level Oil & Gas Exploration and Production Leader

cfd, thermal, aircraft, turbomachinery

I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .

E&P Geophysicist & Integrated Geoscientist (at Advisor/Senior Staff or Practice Manager level) immediately contributing Prospect Generation, Reservoir Seismo-Geology/ Seismo-Petrophysics, 3D Reservoir Modeling & Seismic/Sequence Stratigraphy enhanced with IT Applications; Strategy Mgmt, Risk Mgmt.

A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for

A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi

I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc

30 years international executive leadership of HSEQ, integrated risk and life-cycle management gained in engineering, fabrication, construction, commissioning, operation, maintenance and decommissioning projects.

23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses

Qualifications: CPL/JD Skills: Due Diligence, Title Runsheets, Lease Take Off's, Ownership Rpts. and Lease Acquisitions.

Structural and stratigraphic interpretation of 2D and 3D seismic data

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

Landman, Lawyer, Title Abstractoe, Business manager

front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic

23 years experience including IT management, systems architecture and design, analysis, modelling and development, training as well as IS/IT strategies and frameworks for management information systems.

Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.

Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)

HSE, Logistics, Fire protection, Contractors administration, site Supervision.

with practical experience in HRM and Marketing & B.D. fields enhanced by theoretical MBA background. Well acquainted with HRM, organizational and marketing practices gathered within my career path. I also have an aptitude for learning and high level of adaptability

Process Flow Assurance Engineer

Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.

MS Geology; structural geology, prospect generation, basin analysis, petroleum systems, clastics, log analysis, field studies, Petrel, training, managment, recruiting

I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.

Good team player and a strong believer in teamwork and performance; Good verbal & written communication skills and a continuous improvement focus; Good facilitation skills, networking with industry professionals and performing presentations at workshops and seminars; Good leadership and mentorin

20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms

Would you please see my CV and references attached?

an accomplished project manager, Chartered Engineer, with BSc, MSc, in mechanical engineering, holder of IMechE's Diploma in Engineering Management - (Project Management), extensive experience in design engineering, plant engineering, cost and scheduling, procurement, contract administration

21 yars in Oil and Gas Industry

Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller

First [ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out