Resume - Full hands-on maintenance, Working under extreme conditions

Misco Jobs

Resume #88387

CONTACT INFORMATION:
View contact information...

27 Feb. 2008 to date
Globalgeophysical Services-Argentina
As operation and maintenance manager - Crew 428 Argentina.
Globalgeophysical is the world's largest seismic company, provides comprehensive worldwide reservoir imaging, monitoring, and development services.

14 Aug. 2005 – 27 Feb. 2008
Schlumberger- Western Geco-Middle east
As Vibrator engineer - Crew 1914 Libya. Responsible for:
1- Operational
* -Maintaining all vibrators to contract specifications.
* -Servicing, maintenance and repair of vibrators, including Sercel and GPS equipment.
* -The accurate recording of all servicing work performed.
* -Controlling stock levels and maintaining an accurate stock inventory.
* -Ensuring that stock items are correctly stored.
* -Ensuring the safe transfer of department staff between base camp and line.
* -Quality control of vibrator activity during production.
* -Ensuring conditions are suitable for vibrator operations.
* -Supervising vibrator pushers and their activities.

2- Cross Sectional
To supply the other operational departments with any relevant information as required.

3- Administrative
* -To ensure that all equipment has its daily (FIT) and monthly (TRIM) maintenance performed.
* To schedule all equipment undergo the other maintenance checks necessary.
* To maintain an adequate control of all fixed assets to ensure that none are lost or stolen.
* To ensure that adequate equipment and supplies are available for operation and that no excess stock is kept.
4- QHSE
* To ensure that all personnel assigned to department follow the company contract plan, policies and procedures on health, safety and environment at all times.
* To conduct Monthly section QHSE meetings and daily tool box meetings.
* To investigate and report any accident that may occur in section, and take action to prevent recurrence.
* To promote the QHSE awareness by observing, correcting and reporting near accidents, unsafe acts and unsafe situations.
* To carry out periodic safety audits of workers, equipment, PPE and participate in cross audits.
5- Supervision of Personnel
* Organize and co-ordinate geophysical support operations.
* To carry out performance appraisals and assign objectives for crew members.
6- Training
* To ensure that personnel within the vib department are properly trained to perform their assigned tasks.
* To assign mentors for all senior staff who are participating in LMS to follow development, inclusive of LMS, as agreed upon with his supervisor.

1 Mar. 2004 – 30 Jun. 2005
key energy service L.L.C.
It is one of the leading companies in the field of work over, Located in Western Desert (Khalda Salam base).
As rig mechanic responsible for:
* Maintaining and repairing work-over rigs National oil well (FRANKS 300, 500,750 series).
* Detroit Diesel series 60 and 40 engines.
* Hydraulic controls Allison transmissions.
* Maintaining and repairing mud pumps (OPI, Gardner –Denver and OFM pumps) and (Harrisburg centrifugal pumps).
* Maintaining and repairing power swivel.
* Maintaining and repairing Power tongs (Oil Country).
* Maintaining and repairing pipe and annual rams (HYDREL).
* Maintaining and repairing accumulators (Komeey).
* Maintaining and repairing agitators (Philadelphia) on mixers.
* Maintaining and repairing Electrical generator's engines.
* Solving & troubleshooting most faced problems concerned about work-over rigs.

25 Nov. 2002 – 28 Feb. 2004
Egyptian International Motors Co.
The Sole distributor for Komatsu LTD. Earth move equipments,
Working as Service Engineer responsible for:
* Maintaining & overhauling all hydraulic circuits for heavy-duty equipments.
* Solving and troubleshooting most faced problems.
* Repairing hydraulic pumps, controls, cylinders and hydraulic motors
* Maintaining power train circuits
* Repairing torque converters, transmissions and final drive
* Testing and adjusting hydraulic circuits and power train circuits.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 10902)

Go to Search Parameters...

Brief Description

Static Equipment Mechanical Engineer

Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.

A highly creative, goal-oriented process design engineer with strong communication and presentation skills. Demonstrated experience in design, simulation and engineering calculations. A team player and computer professional.

Petrochemicals Marketing Consultant

Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. Best for Oil Company who need to IMPROVE its PRODUCTIVITY. High production, safe, with lower cost.

Gas engineer, pipeline engineer, gas distribution, transportation, metering reducing gas, midstream/downstream gas, gas facilities.

Full hands-on maintenance, Working under extreme conditions

M.Sc. Petroleum Engineer with excellent experience in Petrophysics- Specialist in Geolog Software_highly self motivated, Oriented and hard working, able to work in multidecipline, willing to travel internationally on mission

sr mechanical engineer

Linux/Storage Admin

Piping detail design isometric MTO and layout detailng etc

Highly skilled engineer with over 10 years experience undertaking electrical engineering projects as well as having an understanding of industrial automation

Currently authorized to work indefinitely in the United States (Green card holder). Have more than 6yrs work experience in the oil industry. Worked as a Petroleum/Reservoir engineer and well versed in EOR and secondary recovery techniques and use of commercial reservoir simulators

Currently working as a Civil/Structural Engineer in WORLEYPARSONS (ABU DHABI – UAE).

I am a fully qualified Electrical Engineer to HNC level, having served my apprenticeship with a multi-national company within the UK. I enjoy excellent health and am competent, dependable and hardworking. I am equally comfortable working on a solo project or as part of a team.

Mechanical Engineer with 12 +years expereince with experience in Front end Engineering and Detailed (FEED) Engineering, Project Management and supervision industrial projects in Petrochemical/Oil & Gas. Presently i am working in a Engineering Consulting Company in Saudi Arabia.

Having total 10 years of exp. in HSE-Safety field in Petroleum/oil/gas Project, steel, automobile plant and project at Oman , UAE, Qatar & India

Over 10 years experience in shipping industry mainly in estimation, project planning, building, design and purchase.

SENIOR PIPING / MECANICAL DESIGNER

Geotechnical Field Rep

•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.

A highly skilled Chemist Engineer with over 24 years experience in Oil and Gas Industry in Romania and abroad. QUALIFICATIONS: technical advisor, training supervisor, commissioning & start up engineer , shift supervisor

I have 20+ years experience in fire, safety, risk, design and testing. Of this 14 years were spent overseas.

Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Senior Mud Engineer as employee with Halliburton – Baroid at Port Harcourt Nigeria, working offshore Guinea Gulf in deep water Rigs.

Senior Lease Operator with 20+ years experience in Oil and Gas Operations.

I have been working offshore for the past 25 years, working my way up through all positions to Day Drilling Supervisor. Since August 2007 to present, I have been working onboard the ‘Wilcraft’ jack up rig first as Night Drilling Supervisor and as of September 2008 as Day Drilling Supervisor.

I´m WSG, I´d worked in Mud logging services & Geochem Lab in Brazil more than 8 years, my last 3 years working in Argentina as WSG

NAval architect

Motivated and capable in team or independent work setting , Strong problem solving abilities, Mechanical aptitude, Receptive to feedback, Attention to detail with strong sense of urgency and precision , Honest and hard worker, Quick learner, Supervisory skills (managed up to 60 people),

Rig Mechanic 32 years exp onshore and offshore with supvisory esperience also

28 safe years in the oi and gas/petrochemical industries. Worked in commissioning jobs throughout Canada and I am seeking an international placement with 28/28 rotation onshore

Free! Highly Experienced Operations Manager

iadc certified drilling supervisor with 25 years experience in the oil & gas industry. Strong knowledge of all aspects of drilling in both horizontail & verical wells

Extensive experience of installation and inspection & supervision of electrical equipment in hazardous and non-hazardous areas i.e. - Installation and commissioning of P.L.C. panels: switchboards: main circuit breakers: transformers: generators: 3 phase motors: 3 phase power supplies: marshalling bo

QA/QC Inspection Engineer

I am a Petrophysicist with 8 years experience in a major independant energy company. I have worked in exploration and field development. I have a masters degree in petroleum geology and undergraduate degree in geology. I have well developed communication and interpersonal skills.

A result-oriented Instrument/Control Systems Engineer offering over 11 years of experience in the Petrochemical, Oil, Gas and Refinery industry handling operations and maintenance.

Varied geographical experience and knowledge of most mud systems used by mud companies in the industry and all type of cement slurries.

With a passion for safety duties, the motivation to succeed, strong interpersonal and effective communication skills and a particular talent to forward-planning to develop effective and feasible solutions

My skills as a drilling foreman are Drilling, Work Over, Completion and Safety. I have 40 years of oilfield experience. I have an up to date Well Control Certification.

Pipeline & facility supervision

Looking for and Field Operating Position / Production Coordinator, Can also Well Service

Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have

I am someone who is highly motivated and organized. I have over 20 years in the construction industry, including work in Western Canada and time in Angola as a Construction manager, where my duties were tto evaluate and implement new processes to achieve cost certainties in an exploration environmen

I have extensive supervision and management experience (including QA/QC) on contracts valued from £30 million to £3 billion in the fields of Oil & Gas related work, military airfields, Power plant construction, water provision and dam construction in the Middle East, Africa and the Caribbean.

Reservoir or Production Engineer

Social Responsibility Specialist

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out