Resume - Experienced & Seasoned Engineer

Misco Jobs

Resume #88390

CONTACT INFORMATION:
View contact information...

PROFILE

Seasoned engineer with supplier development, project management, manufacturing, and design & development experience.

United States citizen & Canadian permanent resident.

PROFESSIONAL EXPERIENCE

BALLARD POWER SYSTEMS, Burnaby, BC 2007 – 2009
Supplier Development Engineer (2008 – 2009)
* Ensured that suppliers met technical, capability and quality requirements through the Pre-Production Approval Process (PPAP) and were in line with product cost targets.
* Researched and evaluated potential suppliers with respect to ability to execute against Ballard's long-term strategic plan.
* Assessed product feasibility and quality for the automotive fuel cell stack (MK1100), Bus program (HD6) and Back-Up Power programs (1020 ACS & 1300).

Manufacturing Engineer (2007 – 2008)
* Developed hydrogen fuel cell assembly processes for the MK1100 program. Past process had no flow and had a lot of waste in the system. The MK1100 fuel cell is the lead automotive program for Ford Motor Company and Daimler Corporation.
* Drove variability out of the finished stack assembly by implementing process changes and/or recommending product design changes.
* Investigated root causes behind any out-of-specification conditions and implemented corrective actions.

FORD MOTOR COMPANY, Dearborn, MI, USA 2001 – 2007
Manufacturing Engineer, Vehicle Operations
* Acted as Systems Engineer for Body Shop sheet metal on the 2008 Ford Taurus / Ford Taurus X / Mercury Sable at the Chicago Assembly Plant. Worked with Ford Stamping, Ford vendors and Ford body launch teams to ensure a quality product. Ensured that all "A" surface sheet metal was free from dents, dings and that specified margin and flushness requirements were met.
* Launched the Ford Focus (3dr/4dr/5dr/Wagon) underbody tooling at Wayne Assembly Plant for the 2006 Consolidation program. Reduced total cost by approx $1.5 million USD by eliminating non-essential program content. Increased line rate in the rear ladder line from 62 net to approx 70 net jobs per hour (JPH).
* Launched the Lincoln LS closure manufacturing and closure install tooling at Wixom Assembly Plant for the 2003 refreshening program. Ensured that all "A" surface sheet metal standards were met and eliminated overhead cost by 2 heads per shift.
* Provided simultaneous engineering, manufacturing direction, and assembly feasibility to ensure product / process compatibility from the early stages of development through the launch process. Delivered capable processes and tools for body shop operations.
* Assisted in establishing and delivering program investment, variable cost, and weight, quality and capacity targets.
* Took a leadership role in resolving assembly related concerns for respective area of responsibility.
* Supported variability reduction and lean manufacturing initiatives and incorporated global manufacturing strategies and best common assembly practices.
* Managed the design, development, installation and launch of body assembly tooling. Worked as a team with Ford manufacturing & design engineers, Ford assembly plant and tool vendor personal to make each program a successful launch.

TELEFLEX AUTOMOTIVE, Troy, MI, USA 2000 - 2001
Applications Engineer
* Led the design and development of the Accelerator & Cruise Control systems for Ford Motor Company.
* Managed all Ranger, Explorer, and F-53 Stripped Chassis programs.
* Met with Ford engineers on a daily basis to discuss and resolve new, current or past program issues.
* Reported issue status and resolution to Ford and Teleflex engineering, purchasing, and manufacturing operations.

YAZAKI NORTH AMERICA, Canton, MI, USA 1996 - 2000
Mechanical Design Engineer
* Led the design and development of Instrument Clusters for the Toyota and Mitsubishi North American markets.
* Worked with OEM customers, Yazaki Corporation-Japan office, North American suppliers and Yazaki manufacturing team during product development.
* Traveled to Yazaki's Mexican manufacturing operations to ensure a quality launch of each product that I was involved in.

CARRON & COMPANY, Contracted to Ford Motor Company, Dearborn, MI, USA 1995 - 1996
Design Aid Coordinator
* Chaired and coordinated the 1999 Expedition/Navigator Design Aid meetings.
* Coordinated installation of latest level prototype parts on design aid bucks for packaging analysis.
* Reported complex problems with underhood packaging to Design Engineers.

Weight Analyst
* Analyzed total weight of 1999 light truck subsystems to ensure that US government emission standards were met.
* Tracked and recorded weights of steering, suspension, wheels/tires, and interior components.

GENERAL MOTORS CORPORATION Pontiac, MI, USA Summer 1994
Engineering Intern
* Worked with Product and Container Engineers to develop sheet metal racks.
* Developed and delivered quote packages for sheet metal container assemblies to vendors.
* Traveled to various plants and suppliers to inspect and analyze body part containers.
* Followed up with suppliers on body panel rack tooling.

EDUCATION & PROFESSIONAL DEVELOPMENT

Bachelor of Science – Industrial Engineering Technology 1995
Central Michigan University, Mt Pleasant, MI, USA

Six Sigma Greenbelt / Process Control Methods / Failure Mode and Effects Analysis (FMEA) / Systems Engineering Fundamentals / Global 8D / Experimental Design /
Manufacturing Reliability / Applied Consumer Focus / CM4D / GD&T

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9501 to 9550 of 10903)

Go to Search Parameters...

Brief Description

Well experienced in Document Controller & Secretarial jobs in Construction and Petrochemical companies in different Gulf countries. Knowledge of operating M.S. Office and Acconex. Currently working as Document Controller in Dubai Metro Rail Project, UAE since 1-1/2 years.

Electrical engineering major in power .

As Geosciences Engineer, 13 years of experience. Exploration and Production mines

Good interpersonal and communication skills, Counseling and persuasive ability,Good quality report writing and typing speed, Public speaking and presentation capacity, Proficient use of spreadsheet software and Microsoft Office suite such as MS-Word, MS-Power point, MS-Access and MS-Excel,

Electronics and communication Engineer

Experienced Mechanical supervisor with over thirty years spent employed in the middle east.

GSM/CDMA Project Manager

Safety Supervisor , HSE Supervisor for all oil/gas, Pipeline, Offshore Construction, civil Construction

Installation and commissioning, project management

16 years Safety Construction, Developer of Behavior Safety Assurance Formula, Bs Occupational Safety and Health

Comprehensive problem solving ability, excellent verbal and written communication skills, willing to learn and team facilitator

Of particular note for you and the members of your team as you consider the placement of a position are my strong accomplishments in my ability to operate a forklift while loading or unloading freight, production and/or shipping experience and completing orders and supplier subcontract parts.

Respected Sir, I have come to know through some of my close sources about the post of a rig worker Under your kind control & I am applying for the same by forwarding my curriculum vitae. I am requesting you to please give me a chance.

i had just completed my B.Tech in electronics and instrumentation engineering from IET bhaddal punjab state india. My six months industrial training was on PLC Programming and working, installation and troubleshooting of field sensors interfaced with PLC's OR PC's.

Experienced & Seasoned Engineer

General Accountant/Financial Reporting

Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.

I am a target oriented person with vast experience in Oil and Gas Construction Projects, I have experience in the safe Erection, Dismantling and Modifications of all Scaffolds in accordance with BS 5973 Standards, Inspection of scaffold materials and fall protection systems, documentation of scaffol

Honest, proactive, innovative, safe, persuasive

Contracts Manager

Civil Engineer with Project Control experience and knowledge of Primavera (P3)

MSc Petroleum Engineer

A hard working and dedicated recent graduate with proven organizational skills and practical experience in geological field work. Effective leadership skills and a cooperative team player with the willingness to learn. Can be relied on to get the job done. Seeking a geologist position.

Intend to build a career with leading corporate with committed & dedicated people, which will help me to explore myself fully and realize my potential. To be a part of dedicated, goal-oriented problem solving team.

Senior Contract Engineer Trilingual English/French/Spanish Oil and Gas industry, experience in Africa, South America, Europe. Working for a major international engineering company. Mainly contract formulation and admin. but also project and construction management, cost control and planning.

Mechanical Engineer with experience in Oil, Gas and Industrial air filtration to meet ISA standards

A broad professional knowledge and experienced in Civil QA/QC and Field Engineering Construction in infrastructure, defence and oil/gas/petrochemical plant construction projects.

Chemical engineer with 3 years of experience in the fields of R&D, pilot plant, process design, basic & detailed engg., project management & procurement in chemical, bulk drug & pharma industries

water and waste water power plant, steam, laboratory, analysis chemical chemist

Unloading trailers, Recieving, shipping of product, conduct daily activity of 12 employees in a warehouse, some knowledge of mechanical and electrical systems, some knowledge of computer systems, capable forklift operater, class b license.

Human Resources/Recruitment Internal & External/Projects - Systems Coordinator Overseeing of Project Managers & Their Teams Aust & Oversees/Mining & Gas Industry/Management/OHS Rotational shifts/FIFO/Shift Work. I have just returned from Nauru where my partner was the Operations Manager in the Mines

A chemist with technical skills trainings in Industrial Process Controls, Advanced PLC, Hydaulic Industrial Controls, PLC, Electro-Pneumatics, Calibration for Process Instrumentation, Advanced Industrial Motor Controls, Pneumatic Industrial Controls & Industrial Electrician

Florida P. E. No. 54962 & Texas P. E. No. 29648; Degree: Bachelor of Science in Civil Engineering - University of Texas, El Paso; Graduate Studies: 12 Hours-Civil / Ocean Engineering - University of Houston; Languages: Fluent in English and Spanish; Beginning French and Arabic

Project maintenance manager/planner/trainer

9 years of extensive experience in Project Management, Planning and Execution involving fabrication, erection & commissioning of Piping & Equipments in Nuclear Facilities, Petrochemicals, Aluminum Smelter and Gold Mine Projects.

Project Manager, Telecommunication, Civil Engineer, Project Coordinator, Project Engineer, Supervisor

9 years in Oil & Gas industry gaining extensive experience in warehouse management, logistics, procurement and supply chain management. Progression has been made from a 'shop floor' position to become part of the company materials management.

Mudlogger I`m able to work in any company

B.Tech-Mechanical Engineering, CSWIP-3.2 Senior Welding Inspector and LEAD Auditor-ISO 9000 having a 16 years experince in various levels in EPC projects ion Oil.GAS, Petrochemicals,Refinery and Pipeline in India, UAE,Nigeria, Saudi Arabia and Qatar.

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

4 1\2 years of fiberglassbody design for vehacles(BMW racingcars ADAC) ,plus managment for Airbrush art and Design. 2years as an technicalasistent for industrie wenting and airconditioning. Speek German and write German 100% , too.

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

Complete Facility Maintenance

AutoCAD, AutoDesk, CATIA V5, Pro E, SolidWorks, MatLab, MathCAD, Maple, MDesign, Ricardo Wave, GT Suite, Fluent, BasicStamp, C++, C+, PSpice, and basic Java programming „« Windows operating systems, Microsoft Office

HR/Recruiting/Client Relationship Expert

Security, Dozer Operator, Roller Operator, Oilfield preparations and Construction work.

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

Management/Business Development of Engineering/Consulting Services

Experienced Petroleum Production Database Admistrator and Petroleum Geoscience Professional

document controller / information manager / fluent English and Erench/ experience oil project FPSO / vendor engineering hyundai documentation/ final documentation/ client link on final documentation/ vendor support for final documentation

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 [ 191 ] 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out