Resume - 11 years experience in offshore construction, field engineering, planning, offsh...

Misco Jobs

Resume #88401

CONTACT INFORMATION:
View contact information...

EDUCATION
B. SC. In Mechanical Engineering
Faculty of Engineering Alexandria University.
With Good Degree in June 1996.

Diploma in Offshore Engineering
Arab academy for science and technology and maritime transport.
With Excellent Degree in June 2007

QUALIFICATIONS
PMP
Project Management Professional
Project Management Institute Jan 2009
Languages:

* Arabic Mother tongue
* English Fluent spoken and written
* French Fair

Current Position Description:

Operations Engineer J Ray McDermott MEI.

Training Courses:
1. Wire rope inspector level 1
2. Applications of M/S office AutoCAD
3. Offshore marine survival
4. Basic fire fighting
5. Basic first aid
6. HUET
7. Principals of pipeline design
8. Safe Lifting

Work Experience:

1. Operations / Lead Field Engineer (JRM)
From June 2006 till now

Directly reporting to the project manager and offshore division manager in execution of the project activities as:

* Coordinate all project vessel requirements and movements
* Monitoring the progress of the work and site conditions and advising of any developments that may result in changes to the work schedule.
* Issuing and maintaining the offshore schedule for operations under his supervision, and advise concerned department.
* Reviewing and approving installation procedures and engineering to ensure they meet project and McDermott minimum requirements.
* Resolve any technical problems that arise during offshore installation and assist in any corrective action that is required.
* Develop the scope of work, assist in the award of subcontracts and then coordinate same. review invoice received from vendors and subcontractors.
* Provide or coordinate input to the tender process as required.

Sr. No. PROJECTS COMPANY
1 BI-10-3008 CRPO 01 for installation of 4 jackets, 4 production decks, 3 mezzanine decks, 2 deck extensions, 4 pipelines (size 16"), 4 Cables (5 Kv to 69 Kv), and ICCP anode sleds with cables at 4 platforms in Berry and Safaniya offshore field in Saudi Arabia. Aramco
2 LTA Project BI-10-08299 for installation of 13 jackets, 14 production decks, 1 tie-in jacket(6 leg), 12 pipelines (size 8" to 40"), 5 Cables (5 Kv to 69 Kv), and ICCP anode sleds with cables at 4 platforms in Marjan, Zulf, Safaniya and Karan offshore field in Saudi Arabia. Aramco
3 Qatar Gas 3&4 to install Offshore Facilities for the QG 3&4 pipeline project, in the State of Qatar. Prior to Pipeline Installation, 248 No. of mattresses will be installed at specific crossing positions along the related Pipeline route with additional contingency/adjustment mattresses. Using M.V. "Agile" to install mattresses.
Qatar Gas 3&4
4 6600015768 (OOK) and 6600015769 (IK), BI-10-08297 Maintain Potential Facilities for the "Detailed design, procurement, fabrication, assembly, transportation of (Platforms, jackets and pipelines) by Saudi Arabian Oil Company (Aramco). Installation Procedure preparation and installation supervision for Aramco LSTK, 3 jackets (ZULF 330/339, ZULF 350/359, SFNY TP-18), 3 PDM ( SFNY 656/665, ZULF 330/339, ZULF 350/359), 1 scrapper deck ( SFNY TP-18 + bridge to SFNY 646/655 and 4 pipelines associated activities (crossing and freespane rectification – production and tie-in subsea spools – scrapping and hydrotest)

Aramco
5 BI-10-00452 for installation of 11 new Jackets and 13 Topsides, including modification of 24 existing Observation Platforms, and installation of anode sleds with cables for ICCP System in Manifa offshore field in Saudi Arabia. Aramco

2. Site Manager / Deputy Project Manager:
From March 2005 up to June 2006

- Company: PETROLEUM MARINE SERVICES (P.M.S.).

Directly reporting to the project manager and assist him in the execution of the project activities as:
* Management of the project and control of the related personnel
* Project master schedule and control of its fulfillment
* Budget over-running and procurement.
* Coordination and super vision of activities
Sr. No. PROJECTS COMPANY
1 Sub sea inspection survey for M-36 P/F (Rehabilitation Project)
For 24 P/F using ROV comprise:
General video inspection
Flooded member detection
CP inspection for anodes

GUPCO
2 CGOS pipeline laying program 2005/2006
Consortium between Saipem And PMS for, installation of Four (4) pipelines in the Gulf of Suez area, and the associated sub sea tie-ins, topside hook-ups and topsides modifications to Three (3) platforms, and one shore approach.

GUPCO

3 Infrastructure project
Piping demolish and new piping installation
M-8 P/F reinstatement
Miscellaneous boat landing repair, Deck extensions.
GUPCO

3. Field Engineer: From October 2002 up to March 2005

- Company: PETROLEUM MARINE SERVICES (P.M.S.).
AT PJ-11 Derrick Laying Barge (With Saturation Mode).

Mobilize barge with the necessary equipment, consumables and project material prior to its departure to the field.
* Ensure that all work is done in accordance with the approved procedures and drawings.
* Prepare procedures for installation work at particular location; monitor the progress of work, quality and safety aspects.
* Prepare a work plan for the barge operation on 24 hrs basis.
* Coordinate and monitor sub contractor's performance on the barges.
* Prepare as-built drawings and other engineering documents
Sr. No. PROJECTS COMPANY
1 Fabricating and installation of 12" riser at MORGAN-36 and P/L crossing GUPCO
2 Fabricating and installation of 18" riser, deck extension and 18" jumper line at MORGAN-8. GUPCO

Sr. No PROJECTS COMPANY
3 HILAL Re-enforcement for the jacket GUPCO
4 Crossing and free span correction for the 18" P/L laid from MORGAN-8 to Ras Shukier. GUPCO
5 Fabricating and installation of 12" and 8" risers with the tie-in spools at EDFU P/F GUPCO
6 PF-C deck installation.
PF-C, Risers tie-ins subsea spool ZEITCO
7 PF-A, Top Side Facilities.
PF-A, Risers tie-ins subsea spool. ZEITCO
8 MWP-5, Tripode installation PTB
9 PFSE-1, PFSE-2, PFSW-2 Upgrading. PTB
10 Pipe lying 8" P/L from Shore to ESMA-8
Free span rectification – Pigging and hydro test GUPCO
11 Pipe lying 18" P/L from M-36 to M-8
Free span rectification – Pigging and hydro test
18" old riser removal at M-8 and new riser installation
Install tie-in spool piece at M-8 GUPCO
12 Pipe lying 4" SIMIAN P/L TECHNIP
13 Pipe laying 10",4" and 3" Piggy back at Temsah field PTB
14 ESMA 2 subsea wellhead spool replacement GUPCO
15 Demolish 18" riser and installing new at M-8 and M-36 P/F GUPCO

3. Project Engineer: From September 2001 to October 2002

- Company: P.M.S. AT PJ-11 Derrick Laying Barge.
(With Saturation Mode).
Sr. No. PROJECTS COMPANY
1 Uncrossing of 14" and 6" P/L at AKHEN filed. GUPCO
2 P.F.S.W.-2 Top Side Facilities Tie-ins subsea spool PTB
3 Esma-8, Morgan-8 P/Ls Precrossing GUPCO
4 12" P/L repair Between October A and October E P/Fs. GUPCO
5 Pipe lying 8" P/L from Shore to ESMA-8
Free span rectification – Pigging and hydro test. GUPCO
6 PFSW2 Start up and commissioning PTB
7 14", 6", 3" Akhen subsea Tie-ins spools- Pigging and Hydro test GUPCO
8 Installing risers and subsea spools for EDFU project. GUPCO

5. Project Engineer. From June1998 to September 2001

- Company: PETROJET AT D.L.B. PJ-12.
Sr. No. PROJECTS COMPANY
1 Pipe lying of 36" P/L from shore to Darfeel P/F using automatic welding system. PTB
2 Decks Installation and TSF Darfeel P/F. PTB
3 Pipe lying of 16" P/L from Darfeel to PLEM PTB

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1301 to 1350 of 10817)

Go to Search Parameters...

Brief Description

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

An experience individual with excellent knowledge of Sales/Marketing, Freight handling, Imports/ Exports Management with the objective of achieving organizational goals and making it a strong profit center seeks an opportunity in managerial capacity

I offer a broad range of upstream petroleum business skills and leadership experience covering exploration/development planning and LNG project execution, subsurface and production facilities planning, economic analysis, strategic planning, commercial/legal negotiations and corporate communications.

Senior Project Manager, International Industrial Multi-Disciplinary &Muli-Cultural Projects

Negotiations, planning, economics in international joint venture gas and midstream projects for past 14+ years. Started career as reservoir engineer with Exxon.

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

Analytical chemist in the fields of oil & gas, petrochemical, fertilizers, pesticides and pharmaceuticals.

Technical / Lead Safety Engineer

NDT inspector LVL II

11 years experience in offshore construction, field engineering, planning, offshore and onshore project scheduling, field supervision for installation of offshore platforms pipelines spools, pigging and hydrotesting. Preparation of installation procedures, rigging calculations, material procurement

With 12 years in the Oil Field Industry, working in Brasil as well as other countries such as, Colombia, and USA. I became proficient and experienced in Completions, such as Sand Control (Gravel Pack, Frac Pack, High Water Pack, Horizontal Gravel Pack) Upper Completion (single/dual string), Expandab

Network and security Engineer

HR Officer, Recruitment and Administration, Hiring Officer, Hiring Consultant, Marketing

Degree in Petroleum and Natural Gas Engineering. New Mexico Institute of Mining & Technology (NMT), Socorro NM.

Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry

Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform

ASQ Certified Quality Technician with over 8 years Experience in the development and implementation of Quality plans and manufacturing procedures used in the Petroleum and natural industries for Rotary drilling equipments. Regulatory compliance, QA/QC, NDE, Material testing and Inspection

Human resources

A highly motivated professional with 10+ years of diverse hands-on experience in conceptual process design, technical services and developing/upgrading of upstream oil processing facilities. Worked on petrochemical projects, oil sands technologies and water/wastewater treatment plants from front end

Piping Designer with 12+ years of experience in piping design & detail engineering involving Equipment layouts, Piping layouts, Piping isometrics, Tie-in Schedule and Pipe supports for Onshore & Offshore Oil & Gas, Power and Petrochemical Plants. Have good knowledge of all national & international c

A senior logistics specialist - currently pursuing MBA - with 9+ years of track record in administration, logistics, contract and fleet management with cross competencies in MIS report analysis. Seeking a challenging position with a dynamic organization to apply accrued expertise in achieving tangib

Seeking suitable opportunities in the field of CP including offshore and onshore -industries, oil companies, contracting companies and power sectors, to harness my technical skills & acquired knowledge- to it's best, so as to bring out the best in me and thus to attain the highest degree of progress

Current Position as Air Separation Unit Technical and Process Specialist for Petronas Gas Berhad with previous experience with Air Products Chemical Incorporated and Messer Griesham. Some college from Texas Tech University, Lubbock, Texas USA.

Process Engineer Resume Oil and gas

Heavy Equipment Mechanic Journeyman including Redseal certification. Ten years experience on machines and equipment such as coaches, trucks, trailers, lifts, and others. Also knowledgeable in areas such as A/C, Electrical, Hydraulics, and Air Systems.

Piping Field Engineer – Technical Office

I have generated prospects in several basins. I am a proven oil finder and a team player.

14 years experience in welding technology ,Have extensive experience in welding(SMAW ,GMAW,FCAW ,SAW,TIG etc) of CS ,Alloy Steel ,C-Mn steel , and SS , DUPLEX STAINLESS STEEL , CU ¡VNI , NI ALLOY AND OTHER CORROSION RESISTANCE MATERIAL

Bachelor of Commerce, Budgetary Control, Inventory Control, Planning & Analization of materials, setting up new storage system, Vendor development, Administration skills.

PETROLEUM ENGINEER WITH 11 YEARS OF INTERNATIONAL EXPERIENCE

An experienced superintendent with the necessary skills required for the safe commissioning and operation of oil and gas treatment plant

I've been self employed since 1994 as a baker selling fresh baked goods to people restricted to a gluten free diet. Not only have I been the chief baker, I started the business, do all the office work, do all the marketing, maintain the website, etc.

Over 14 years work experience in various fields i.e. IT/MIS/Help Desk, Storekeeping, Banking and Finance, Clerical and Production

Finance Manager, Qualified Accountant

20 years Experience in the Acquisition of Oil and Gas Leases, Title Examination, Title Curative and Management of Small, Medium or Large Scale Projects within the Rocky Mountain Region

Level 2 UT EN473, RSO, Previous Level III PT,MT,RT. Advanced inspection in Phased Array and TOFD - Good computer skills

I am seeking a long term employment contract within a company as Rigger.

Experienced Coal Geologist and Oil & Gas Development Geologist, results-oriented, very strong mappiing, modelling, drilling program design and oversight.

civil/structural engineer/manager

Petroleum geologist, and specialized in a diversified spectrum of upstream petroleum activities. He also has a long and excellent employment record in both petroleum business and management.

Master Mariner with experience of LPG/C and LNG/C

B.Sc. in Geology, M. Sc. Geophysics Working as Co-coordinator & D. Geophysical Manager

Petroleum/Oil/Gas - Economics and Technical Management - Chem Eng - 30 yrs exp.

19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access.

I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession.

Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production

Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins

Treasury professional with 20 years experience working for three Fortune 500 companies.

Position leading to a career in Environmental Management/Planning with an International Oil Company or a recognized International Consulting Firm.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 [ 27 ] 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out