Resume - PIPING DESIGN ENGINEERING

Misco Jobs

Resume #88412

CONTACT INFORMATION:
View contact information...

SUMMARY:

I have 8 years 6 months experience in Detail Engineering, Basic Engineering, Concept Study and Estimation for Onshore and Offshore platform design, Living Quarters, FPSO, Well Head Platforms, Process Platforms, RMS and Production Station Piping, Refinery Piping, Power Piping, Chemical Plants piping etc. My experience in the field of piping includes Preparation of Plot Plans, Equipment layouts, Key Plans, GA drawings, Isometrics, Piping Bulk MTO, Preparation of Piping Material Specifications/ Valve Specifications, Data sheets for Specialty items, Vendor document review, RFQ¡¦s, TBA¡¦s/TBE's etc. My experience also includes Site survey for both onshore and offshore facilities, Preparation of Basic Piping Study Drawings, Study and reviewing of P&ID¡¦s, Checking of Stress Analysis Reports, Involvement in Hazop¡¦s, Design Reviews, IDC's etc. My experience is also involved in Pre-bid engineering and proposal engineering and help EPC to submit their proposals. My experience also involves supporting EPC in execution of a project.

APPROVALS:

Petroleum Development of Oman/ Shell approved Piping Engineer.
Bechtel approved Piping Engineer.
Have conducted Campus Interviews and interviews in piping design campuses in India.
Certified ISO-9001 2008 Internal quality Auditor.

Experience Details:

1. Larsen and Turbo-Valdel Limited
(September 2008 till date)

Designation: Lead Piping Engineer - Offshore Exploration and Production

Client -1 Oil Natural Gas corporation of India

Project: B-193 Development - Offshore Process Platform- Prebid and Basic Engineering

Project involved 5 Well Head Offshore Platforms, One Process cum Well Platform, Living Quarters, and Modification Job on Existing Platform. As Lead Proposal Engineer my job involved the following activities:

- Going through the bid and raising TQ¡¦s/ queries
- Preparation of Preliminary Equipment layouts, Basic Piping studies, Preliminary MTO
- Preparation of Piping Specs and data sheets for specialty items.
- Support EPC to submit proposals.

Project: RS-12 and RS-14 Well Platform Project- Offshore Well Head Platform:

Project involved Well Head Offshore Platforms, Modification Job on Existing Platform.. As Lead Proposal Engineer my job involved the following activities:

- Going through the bid and raising TQ¡¦s/ queries
- Preparation of Preliminary Equipment layouts, Basic Piping studies, Preliminary MTO
- Preparation of Piping Specs and data sheets for specialty items.
- Support EPC to submit proposals.

Project: Detail Engineering for MHN Process Platform - Offshore Process Platform

Project involved Detail Engineering of MNP Process Platform Complex.

Activities Performed:

1. Preparation and Finalisation of Equipment Layouts.
2. Basic piping studies.
3. Preparation of Piping Bulk MTO.
4. Review of P&ID¡¦s.
5. PDS Model Review using Navis works.

Client -2 MODEC, Singapore - FPSO

Involved in 2 modules of FPSO project (Layouts).

Activities Performed:

1. PDMS Model Review using Navis works.
2. Checking of Isometrics.
3. Checking of MTO¡¦s
4. Preparation of data sheets for specialty items.
5. Involved in Design Reviews.

2. Tebodin and Partners LLC, Muscat, Sultanate of Oman
( From April 2007 till September 2008)

Designation: Lead Piping Engineer- Onshore Exploration and Production

Client 1 - Petroleum Development of Oman/ Shell
Project Name - DD for SNGP Booster Compressor Station- Onshore Well Head and Production Station

Project involved detail engineering of Nine Gas Wells, Remote Manifold Station, New Booster Compressor, it's utilities (H.P Flare, L.P Flare, Compressed Air, Main Gas Line, Seal Gas Line, Condensate line, Drain Line etc). All the lines where tied-in to the existing plant. Standard followed for the project was Shell Standard (MESC system, SAP System, SP¡¦s).

Activities Performed:

1. Site Visit.
3. Discipline Check of PEFS ( P&ID¡¦s)
4. Specifications for Specialty items like (X-mas tree interconnecting flange, Casasco fittings, Specification for big size pipes and fittings).
5. Preparation of Plot Plans and getting approval from the client.
6. Preparation of GA drawings and Key Plan.
7. Coordination with other departments for developing their deliverables
8. Preparation of Isometrics.
9. Preparation of stress analysis report using CEASAR -II for the above lines
10. Preparation of Preliminary, Intermediate and Final MTO for the project.
11. Handling Site Queries
12. Final As-built Drawing.
13. Execution ( Construction Support)

Project Name - DD for RMS-11 and GRE Pipe Lines

Project involved detail engineering of 28 Oil Wells, Remote Manifold Station, it's utilities (H.P Flare, L.P Flare, Compressed Air, Gas Lift Line and drain Line). Bulk Oil line and Flare line where tied-in to the existing plant. Standard followed for the project was Shell Standard (MESC system, SAP System, SP¡¦s).

Activities Performed:

1. Site Visit.
2. Discipline Check of PEFS ( P&ID¡¦s)
3. Specifications for Specialty items like (Multiport Selector Valve, Gas Lift Manifold, Specification for big size pipes and fittings).
4. Preparation of Plot Plans and getting approval from the client.
5. Preparation of GA drawings and Key Plan.
6. Coordination with other departments for developing their deliverables
7. Preparation of Isometrics.
8. Preparation of stress analysis report using CEASAR -II for the above lines
9. Preparation of Preliminary, Intermediate and Final MTO for the project.
10. Handling Site Queries
11. Final As-built Drawing.
12. Execution ( Construction Support)

Project Name - DD for LEK-C Manifold to LPS Production Station

Project involved detail engineering of interconnecting piping from LEK-C Manifold to LPS production Station, Bulk Oil line and Flare line where tied-in to the existing plant. Standard followed for the project was Shell Standard (MESC system, SAP System, SP¡¦s).

Activities Performed:

1. Site Visit.
2. Discipline Check of PEFS ( P&ID¡¦s)
3. Specifications for Specialty items like (Multiport Selector Valve, Gas Lift Manifold, Specification for big size pipes and fittings).
4. Preparation of Plot Plans and getting approval from the client.
5. Preparation of GA drawings and Key Plan.
6. Coordination with other departments for developing their deliverables
7. Preparation of Isometrics.
8. Preparation of stress analysis report using CEASAR -II for the above lines
9. Preparation of Preliminary, Intermediate and Final MTO for the project.
10. Handling Site Queries
11. Final As-built Drawing.
12. Execution ( Construction Support)

Other projects handled in the company includes:
1. Concept Study for Fahud and Qarn Alam Fire Water System Upgrade
2. BFD for Sayyala and Sadad Booster Pumps,
3. DD for Oil and Gas Wells for Lekhwair area
4. DD for Burhan West Development,
5. DD for Alhuwaisah Water Injection Facility etc and
6. Involved in estimation of man-hours for detail engineering Projects.

Client 2- Occidental, Oman

Project involved detail engineering of pipelines from Bulk Manifold Station to production Station. The pipeline was almost 5 kms. Bulk Oil line was tied-in to the existing plant.

Activities Performed:

1. Site Visit.
2. Discipline Check of PEFS ( P&ID¡¦s)
3. Preparation of Plot Plans and getting approval from the client.
4. Preparation of GA drawings and Key Plan.
5. Coordination with other departments for developing their deliverables
6. Preparation of Isometrics.
7. Preparation of stress analysis report using CEASAR -II for the above lines
8. Preparation of Preliminary, Intermediate and Final MTO for the project.
9. Handling Site Queries
10. Final As-built Drawing.

3. Saudi Arabian Kent Co. Limited, Saudi Arabia (From Jan-2006 till April 2007)
Designation: Piping Engineer

Client-1 Eastern Petro Chemical Company ( SHARQ)- SABIC / Foster Wheeler, UK.
(Jan-2006 till Sep-2006)- Refinery Project

„« Designing of utility pipelines like Ethylene, Oxygen, Nitrogen, Caustic Soda, Ethane, Natural Gas, Butane, Instrument Air, Portable water from metering skid to different utility locations.
„« Preparation of Plot Plans and Isometrics for utility lines.
„« Preparation of tie - in packages for the above lines.
„« Preparation of Piping Layout drawings for E/W and N/S Pipe rack
„« Preparation of Piping layout and Isometric drawings for Royal Commission.
„« Preparation of stress analysis report using CEASAR -II for the above lines.
„« Preparation of Layout Drawings and Isometrics for RC Corridor.

Client - 2 Jubail Chevron Philips Petro Chemical Company (Jan-2006 till Sep-2006)- Refinery project

„« Preparation of Plot Plans and Isometrics for utility lines.
„« Preparation of stress analysis report using CEASAR -II for the above lines.
„« Preparation of Plot Plans and Isometrics for utility lines.
„« Preparation of tie - in packages for the above lines.

Client - 3 New Doha International Airport - Qatar Kent/ BEMCO/ Bechtel
(Sep-06 -April 2007)- Infrastructure Project

Was a part of Utilities Package where I was involved in Vendor discussions and checking technical portions for the following items:

Generator, Chillers, Air Handling Units, Fire Water, Potable water, Irrigation Water, Lift Station, Diesel Transfer Pumps, Expansion Tank & Air Separator, Diesel Storage Tanks, Pipes& Fittings ( Cast Iron, Ductile Iron, HDPE, Copper Pipes, Pre-insulated & Carbon steel Pipes), Valves ( Manual Valves, MOV¡¦s, Control Valves, Pressure Relief Valves, Balancing Valves etc)Duct and Accessories ( Louvers, Grilles, Acoustic Silencer, Dampers etc.), Fire Protection System ( Fire Extinguishers, FM 200 System etc) & Waste Water Treatment Plant.

Systems Handled:

Potable, Fire water, Waste Water & Irrigation Water System
Chilled Water System

„« Preparation of Technical Submittals & Materials and getting approval from Client.
„« Preparation of BOQ for material take- off.
„« Technical Co-ordination with Bechtel, Worley Parsons & Parsons International.
„« Preparation of Method statements and getting approval from Client.
„« Preparation of Project Specifications to get approval from Client.
„« Preparation of construction isometric piping drawings/ plumbing drawings.

4. Metallurgical Engineering Consultants of India Limited (From Sep - 2001 to Jan 2006)
Designation: Assistant Engineer -Piping

Client-1 Indian Oil Corporation Limited, Panipat, Hariyana

„« Preparation of Plot Plans and Isometrics for utility lines.
„« Preparation of tie - in packages for the above lines.
„« Preparation of Piping Layout drawings for Pipe racks.

Client-2 High Grade Pellets Limited, Vizag

„« Designing of compressed air pipelines.
„« Preparation of technical specification for air compressor.
„« Preparation of Detailed Project Report for 33 MW coal fired Captive Power Plant.

Client-3 SeaBird, Karwar

„« Involved in designing of compressed air pipelines
„« Preparation of technical specification for air compressors.
„« Design of Compressor room.

Client-4 Jindal Vijayanagar Steel Limited, Bellary

„« Involved in designing of High Pressure steam pipelines for interplant piping from JVSL Power Plant to Turbo Blower House as part of inter plant piping.
„« Preparation of technical specification for Pressure Reducing and Desuperheating Unit.
„« Involved in preparing of P&ID's for Converter Gas Cooling System and Preperation of Gas Cooling Pump Layout, foundation details, load data's and it's piping drawings.
„« Preparation of Technical specification of 10 Tons/hr Corex Gas Fired Boiler and piping drawings as part of in plant network.
„« Preparation of technical Specification for compressed air and preparation of piping drawings.

Client-5 Kerala Minerals and Metals Limited, Kollam

„« Involved in preparation of Detailed Project Report for 2X20 MW Coal fired Captive Power Plant. Design of Compressed Air and Steam Pipe Lines.

Client-6 Naval Physical Oceanographic Laboratories, Kochi

„« Project Planning, Take up Break Up and Scheduled Maintenance, Discussion with Contractors, Preperation of Schedules as part of Annual Maintenance Contract,
„« Preparation of budgetary costs, financial bills, collection of reimbursable and non-reimbursable costs, Preparation of tender documents for equipments as part of AMC. Preparation of note for approval from Tender Recommendation Committee.

Client-7 TTPL, Trivandrum

„« Preparation of Technical Specification of Boilers.
„« Designing of Compressed Air and Steam Pipelines as part of in plant network.

Client-8 VISL, Bhadravati

„« Preparation of Technical Specification of Boilers of 20 Tons/hr furnace oil fired boiler.

Client-9 Essar Steel, Hazira

„« Preparation of Technical Specification of Boilers.
„« Designing of Compressed Air and Steam Pipelines as part of in plant network.

EDUCATION DETAILS:

SSLC 72% (Karnataka State Secondary Education Board)

PUC 70% (Karnataka Pre - University Board)

B.E (MECH): 76% (BANGALORE UNIVERSITY)
DR.AMBEDKAR INSTITUTE OF TECHNOLOGY, BANGALORE
P.G D In
Power Plant Engineering: 70 %( National Power Training Institute, Neyveli)

Computer Knowledge:

Operating System: Windows, DOS.
Mechanical Software: Auto CAD-2000, Navis Review, CAD Works, CAE pipe, Caesar-II, Valve Sizing, Cost Model.
Other Software: Microsoft FoxPro, Microsoft Project, Microsoft Office

Standards:

Have knowledge in IS, BS, ANSI, SABIC, ARAMCO, SHELL standards.
Have knowledge in CS, DSS, SS etc.

Personnel Details:

Date of Birth 09/01/1979
Pass Port Details No. H8027249 Date of expiry - 12.10.2019
Languages Known English, Hindi, Kannada
Hobbies: Reading Books, Watching Movies, Playing Cricket etc.

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 10902)

Go to Search Parameters...

Brief Description

I am a HVAC /Electrical Lead technician with 22years experience 19 years in Multi-national oil companies both onshore and offshore for production platforms and perform preventive maintenance activities, job scheduling including preparation of JSA with relevant parties .

Electrical Engineer

Workover/Completion Consultant/Supervisor

Production foreman with twenty years of experience in oil and gas industry.

Occupational Health and Safety Engineer with Industrial Hygiene Background. Worked on Variety of Oil & Gas Project

Working with Multinational Oil Company HALLIBURTON WORLD WIDE LTD, in Pakistan as a Senior Service Leader.

Accomplished Engineer With 14 Years Of Diverse Experience In Production, Planning, Materials Management

Equipment handled are : Feed Treating, Reforming, Purification, Synthesis Gas Loop, Ammonia Refrigerant System.

I am a fully qualified Cost Engineer and Estimator and have contract claims experience. Please see resume for details.

Senior Executive with verifiable performance in the fields of Project / Operations Management and Techno-Commercial management in Shipyards and Oil & Gas industry.

Two Masters Degrees in Hydro-Geology and Geology from the top ranking university in India. Over 17 years of GIS and AM/FM/GIS working experience with leading companies in Asia and Middle East. Involve in large-scale projects with major clients across the Globe implementing GIS and AM/FM/GIS project

International logistics

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

Extensive experience as a Project Manager with a focus on facilities design & construction, oil and gas regulations and environmental concerns. Responsible on all projects for design, material specs, P&ID ‘s and coordination of construction.

B. Tech in Metallurgical Engg, 27 years experience in Corrosion & Inspection function in refineries

With 20 years experience in all types of Construction especially in Oil & Gas.

Total of 27 years experience in Inspection, Quality Control and Non Destructive Testing of Pressure Vessels, Heat Exchangers, Piping and Structures for Petrochemical Plants, Power Plants, Rigs, Ships and Storage Tanks both at the time of fabrication and on-stream stage.

Senior Piping Designer with experience through both contract and direct work assignments, with major emphasis in the areas of Specialty Chemicals, Pharmaceuticals, Petrochemicals, Sulfur Recovery, Heavy Industry, Gas Turbine & Power Generation.

B.sc Petroleum Engineering, Model 204, SAS, Oracle, Oil and Gas Database Conversion, Production Engineering, Reservoir Engineering, Supported Petroleum Engineering application (Pipeflow, Pipesim)

Senior Petroleum Engineer with long experience in Oil & Gas Industry

Experienced LNG & Petrochemical plant commissioning and maintenance activities in Electrical field. Petrochemical and Utility plants instrumentation experience is an additional experience

I am a certified professional engineer with MBA and having 17 years of Contracts & Procurement experience in Oil & Gas and Powers sector.

Sr. Interpretation Geophysicist w/exploration & reservoir development experience

Instrumentation Engineer, Detailed Engineering for offshore, FPSO, oil/gas,steel plants

Over 25 years experience in the oil & gas and heavy engineering industries involving all contractual and commercial aspects of project controls works covering:- proposals management; contract preparation / tendering / administration; capital budget / forecast / cost control; and contractual claims.

Mech Engr with 22 yrs exp in power plant projects, working with Thermax Babcock & Wilcox Ltd.

Expert in Industrial Gas & oil separation plants (GOSP), Gas Terminals and Stations.

Significant record of managerial and administrative contracts experience in the petrochemical, power and telecommunications industries consisting of development, drafting, negotiation, execution, management and administration of contracts and licensed technology agreements.

MANAGEMENT Able to make sound prompt decisions encompasing a diversity of areas: From design and implementation through to resources and progress strategies.

Experience in reliabilty centered maintenance and Mechanical Integrity. Extensive experience with Project engineering.

17 years experience in procurement and supply chain management in Marine, gas, oil field. Post graduate in materials management from IIMM Bangalore India. Worked with majors viz. Halliburton Inc Houston TX, supreme food service AG Ziegelbruckestrasse, Switzerland , Dubai dry docks Dubai UAE

I introduce myself, i am an Electrical Engineer worked in IRAN under Hyundai Engineerung & construction co. for South pars Field Developement Phase 4 & 5 and before Phase 2 & 3 also.

I am wireline supervisor and consultant - I have a long experience

More than 30 years on operations,pre-commissioning and commissioning

at present working on cyberbase rig totally computerised

Experiences: Oil / Gas Field Facilities, Pipeline and Production Plant Operations, Commissioning and start up

Professional Drilling Consultant

Welding Suprintendent / Supervisor

PIPING DESIGN ENGINEERING

For the past 15 years I have been employed in petrochemical piping & Power Plant design & drafting utilizing Autocad, Microstation, 3D CADWORX, Plant 4D Programs and Field surveying using Total station and 3D Leica ScanStation 2, using Cyclone and CloudWorx programs to obtain as-builts of existing f

Studying M. Sc I Year (Environmental Science) in Distance Mode B. Sc Diploma in Occupational Safety Health and Environment ,First aid training

Free! An MBA graduate with 6 years of work experience in the oil and service-related industries. Experience in ESP, HPS, VSDs, PLCs, HMIs, and SCADA systems. Additionally, I have experience in project management.

Planning Engineer, Workshop Management, Maintenance and Material control, Safety Officer, AutoCAD, Fleet Management System Software(FMS),IVMS Download, Internet Skill, MS Word, Ms Excel, Corel Draw, Primavera Project Planner (P3), Ms Project, Power Point, Ms Dos, Publisher, Page Maker, Etc

9 years of rich work experience in Project Controls, Planning & Scheduling functions in the field of Oil & Gas, Petrochemical/Chemical Plants.

Having more than Twenty (20) years of experience in the field of Supervision and Inspection of Welding, Piping Fabrication and Installation in the Heavy Industrial construction such as Oil and Gas Plants, Power Generating Plants, Petro-Chemical and other Industrial Insta

Fifteen years of rich and cross cultural experience in Instrument Construction Supervision, Instrument Inspection, Commissioning and Troubleshooting Maintenance Work of all types of Instruments.

Radio Operator / AB Seaman

B. Sc. with Chemistry along with the 14.5 years of professional and project in petrolium refinery . Precommissioning & commission assistance in, LPG RECOVERY , ACID GAS REMOVAL , FUELGAS/NAPTHA RECOVERY

Free! All round drilling expertise from driller up to management. Managed on- and offshore drilling campaigns world-wide. Shell Round II. Currently head of drilling rig planning, acquisition and divestment for Shell Malaysia. Analytical and problem-solving capabilities. Broad engineering background.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out