Resume - Over 30 years experience in Oil and Gas Petrochemical Industries onshore and off...

Misco Jobs

Resume #88510

CONTACT INFORMATION:
View contact information...

ACADEMIC AND PROFESSIONAL EXPERIENCE
* BSc Mech. Eng.
* HND Mech. Eng.
* AutoCad/MicroStation
* PDS.
* VOL VCA Safety DIPLOMA juli 2019
* LANGUAGES….English;Spanish;

Over 30 years experience in Oil and Gas Petrochemical Industries onshore and offshore in the UK and overseas. Experience gained on various onshore projects, i.e. Power Plants, Chemical Plants, Pumping Stations, Alumina Plant, and Petrochemical Refineries etc.
Also experience on various offshore projects, i.e. Oil &Gas Platforms, FPSO & Drilling.

EMPLOYMENT RECORD:

2008/9 Fluor Daniel (Holland) Shell Nederland Chemie Project.

Piping Layout Engineer/Coordinator:
Duties;-Involved preparing TIE-IN schedule/mark up P&IDs
Showing the demolition and construction scope of work.
Also to liaison with the site answering and queries.
Manpower planning and scheduling design deliverables to meet an integrated
Engineering and construction plan
Also compliance with their relevant engineering standards

2007/8) CBI UK Limited, London (Chilean LNG Project)

Piping Engineer/Coordinator:
Duties involved plant layout and isometric production. Includes manpower planning and scheduling design deliverables to meet an integrated engineering and construction plan. Also Specific project aspects include: Pre-fabricated cryogenic insulation system to reduce construction manhours; layout of plant for future phased expansion; studies of pre-assembled units for rack and jetty sections.

2006/7 Techicas Reunidas,S.A(Madrid)Rabigh Project.
Piping Engineer/Designer
Duties involved Preparing drawings and documents(PDS)
Checking of design drawings for construction
Answering any design querries.
.
2006 Mott MacDonald(London)Oil&Gas Consultancy.
Piping Engineer/Co-ordinator.
Duties involved Preparing drawings and documents for Bids on various project for Motts MacDonald.
Project visits to clients office.

2005/6 WorleyPrasons(London)Agip Kashagan development.
. Piping Layout Design Engineer.
Duties involved Checking of design drawings for construction
Answering any design querries.

2005 Fluor Daniels (Holland) Revamp Hydrocarbon unit

Piping Engineer/Coordinator (PDS)
Duties;-Involved preparing TIE-IN schedule/mark up P&IDs
Showing the demolition and construction scope of work.
Also to liaison with the site answering and queries.

2004/5 WORLEY(Aughinish Alumina Plant)Ireland Foynes.
Piping/Mechanical/Construction Engineer
Duties involved Technical Evaluation of Pumps/Tanks/Conveyors
Equipment for compliance with their relevant engineering standards
The checking of GAs/Isos/P&ID's, Writing scope of works.
Progress reports etc. Answering site Queries.

2004 PETRECO-GPS
Gas Dehydration Process Plant, onshore in Galata Bulgeria
Piping/Construction Engineer

2002/4 HALLIBURTON-KBR
Prirazlomnoye Caisson Detail Design.
Piping Engineer

2001/2 KVAERNER/TOTAL/FINA/Elf (TFE)
Elgin/Franklin project (Aberdeen)
Piping Engineer

.2000. BECHTEL /UK/INTERSERVE LTD
Coryton Energy Plant (Essex)
Construction of 750 MW Combines.One SteamTurbine plus Two Heat Recovery Steam generators with utilities
Piping Engineer (Construction)

1999 RIG DESIGN SERVICES LTD, LONDON
Senior Piping Co-ordinator/Designer

1999 ADNOC/TECHNIP/BECHTEL, JOINT VENTURE
ONSHORE GAS DEVELOPMENT (ODG.II) PHASE 2 GAS TREATMENT UNITS
Piping Engineer

1998 MCDERMOTT / ELF PUQ ALLIANCE
Elgin & Franklin Project (London)
Piping Project Engineer

1997 BECHTEL LIMITED
BECHTEL - ENKA JOINT VENTURE
DE-BOTTLENECK PROJECT
TENGIZ – KAZAKHSTAN
Piping Co-ordinator/Designer

1995/96 PARSONS GROUP INTERNATIONAL. LONDON

ESSO FAWLEY REFINERY (XYLENES PROJECT)
Senior Piping Designer (Auto cad R14 )

NODCO PROJECT
MESAIEED REFINERY EXPANSION, QATAR
Senior Piping Designer

AMOCO (BACTON TERMINAL) TRENT AND TYNE DEVELOPMENT PROJECT
Senior Piping Designer

1994 AMOCO (INDE) PROJECT 49/23
Piping Engineer(Offshore)

1993 ELF PETROLAND (K5 PRODUCTION PROJECT)
K5 TOPSIDES FABRICATION SITE – MIDDLESBOROUGH, TEESIDE
Piping Engineer

1992 JOHN BROWN (CJB) LONDON
NORTH MORECAMBE DEVELOPMENT PROJECT ONSHORE TERMINAL
Piping Area Leader

1991 FOSTER WHEELER PETROLEUM DEVELOPMENT
AMERADA HESS SCOT FIELD DEVELOPMENT
Senior Piping Designer

1990 BROWN & ROOT VICKERS LTD
Project Engineer ( Package Management Group)

1990 H & G ENGINEERING
PB Miller Project – Piping Engineer/Site C-coordinator

1989 EMSTAR LTD (Energy Management Services Technology Resources Ltd
Tunnel Refineries, Tunnel Ave, Greenwich – Piping Engineer/ Co-ordinator

1988 BROWN & ROOT (UK) LTD
Piping Engineer

1987 MATTHEW HALL ENGINEERING LTD
Marathon Oil UK Ltd Brae 'B' (Offshore) – Piping Engineer (Construction)
1986 HOLLANDSE CONSTRUCTIE GROEP BV (HCG) (HOLLAND)
Norsk-Hydro (Oseberg 'A' Platform) – Mechanical/Piping Engineer

1986 PROTECH INTERNATIONAL BV, (HOLLAND)
SCOP/Snamprogetti - Mechanical/Piping Engineer

1982 – 1986 MATTHEW HALL ENGINEERING LTD
Marathon Oil UK Ltd. 'Brae B' - Piping Designer

1982 DENMARK DANBOR TYRA EAST PLATFORM 'A'
DUC Gas Development Project - Piping Designer/Field Engineer

1981 – 1982 MATTHEW HALL ENGINEERING LTD
Marathon Oil UK Ltd - Piping Designer/Co-ordinator

1980 – 1981 BECHTEL GREAT BRITAIN LTD
Mobil North Sea, Beryl 'B' - Module Leader

1979 – 1980 TAYWOOD SANTE FE LTD
Piping Engineer (Construction)
Occidental (Piper 'A') Offshore Project -

1978 – 1979 CONSTRUCTION JOHN BROWN
BP Sullen Voe Project (Piping Designer)

1977 – 1978 BECHTEL INTERNATIONAL LTD
(Piping Designer)
Involved in Abu Dhabi (Bu-Hasa) Gas Extraction Plant.

1976 – 1977 PROCON
Worked on Jordan LNG Platform (Piping Designer)

1974 – 1976 BECHTEL INTERNATIONAL LTD
Designed and Checker on Arun LNG;Merk-Sharp and Dohme

1973 – 1974 MATTHEW HALL Boots Chemical Refineries Piping Desginer

1970 – 1973 KELLOGG INTERNATIONAL (Kellogg's Trained)

1965 – 1970 LONDON ELECTRICITY BOARD (Apprenticeship)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 10902)

Go to Search Parameters...

Brief Description

HYSYS/PROII/NGL/LPG/LNG/SYN GAS - CONCEPTUAL, FEED AND DETAIL - REFINERY, NATURAL GAS, CRYOGENIC PROCESS, SOUR GAS REMOVAL, ADVANCED PROCESS CONTROL (APC), GASFICATION (BtL, CtL and GtL). DISTILLATION AND REACTOR. HYSYS/PROII/ Distillation/Separation Sequence/Pinch Analysis.

HVAC FOREMAN

Drilling supervisor onshore with a good experience in multilateral wells.

22 years experience in maintenance , compressor , generator , pump , drilling equipment , machine shop service , manufacture , inspection service , production , wire line , fishing tools , welding work , commissioning.

Process/Commissioning/Start-up/Operation/Exploitation/Engineer

Condition Monitoring, Reliability Engineer

HSE-Engineering Graduate, P.G. Diploma in Industrial Safety, NEBOSH ,Ecology & Environment, Lead Auditor OHSAS 18001, specialized in Process and project Safety Management, Safety Auditor, Emergencies Planner, Advance Experience in the Management of Major Accident Hazards Controller and Trainer

Free! Geologist with 20 years experience in minerals exploration & oil and gas industries.

Pipeline, Piping & Mechanical Equipement design and construction support

Worked in exploration, production and academia

Pressure vessel design engineer, Proficient with: SolidWorks, Inventor, Pro/E, AutoCAD, Algor, ANSYS, COSMOS, Matlab, Compress Codeware, Intuitive ERP; Proficient with ASME Code VIII, Div. 1 & ASME Code VIII Div. 2, B31.3; kill at using the knowledge in WRC107 & WRC279

Highly skills reservoir engineer with 18 years E&P experience and a Masters in Petroleum engineering Degree. Experience includes reservoir simulation, water flood design and management, EOR techniques, Heavy oil development, reserves evaluation, well test design and analysis & reservoir management

19 years experience in the Oil Industry with both service company & operators in UK, Oman, Australia, Brunei, Saudi, and Malaysia. Experience in Field Development Geology and geocellular modeling.

Position: Senior Instrument Engineer / Qualification: Master of Science (Electronics) - Queen’s University of Belfast

Professional Engineer with 19+ years of experience in engineering and project management, including design, sizing, and specification writing of various static and rotating equipments.

A seasoned completion/well intervention/well test professional with 18 years of experience with expertise in sand control, intelli.

Sr. Geologist with strong project management experience

the position of Chemist and subsequently to put my contribution for the growth and development of the company by utilizing my best efficiency and skills and to achieve my further career advancement opportunity.

first class marine negineer

Experienced Principal/Senior Control Systems Engineer who can contribute significantly to your company.

I submit my application for the same.For the Eighteen years , I am working with Reliance Industries Limited Hazira Complex. During this period I was involved in setting up different laboratories , e.g.Water Laboratory,MEG Laboratory,PVC/VCM Plant Laboratory,Polyethylene Plant Lab,Polypropylene

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

A proactive and enthusiastic individual with 17 years of extensive expertise in the field of offshore positioning/navigation/geophyscial/pipeline/hydrographic survey.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

Sequence Stratigraphy, tectonic, pre/post-stack seismic attributes, petrophysic, static reservoir modeling, fracture modeling

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

Well-developed interpersonal skills.

Senior Process and flow assurance engineer with full project cycle experience.

HSE / Terminal Operations / Construction / Turnaround

I am a licensed Canadian engineer with M.Sc. degree and 28 years experience in Instrumentation & Control Systems (DCS&PLC) design, instruments specification (InTools), purchasing, commissioning, start-ups, maintenance, and training. In past twelve years I worked with major EPC offices in Calgary

I am an MBA with an engineering degree and over 18 years of experience in oil and gas industry across various disciplines like HSEQ management, offshore opeartions and construction projects. Currently, I am employed as the Head of HSEQ at a large organization.

Administration & Finance Specialist in Most Fields of Oil & Gas Industry

With over 28-years of procurement and logistics related experience in the Oil & Gas (Domestic, International Field and Office). Well respected by service and supply companies worldwide, I am currently seeking a challenging position in an international company. Whereby, I can utilize, enhance, and co

Piping Stress Oil/Gas, Off/Onshore, FPSO's and Nuclear - Caesar,Autopipe and PSA5

A committed and professional with over 27 years of progressive and varied experience in the field of Mechanical Engineering in the areas of Operations, Maintenance & Inspection of Petrochemical, Oil and Gas Equipments, Marine equipment. Expediting of equipment for oil and gas industry

I am a positioning specialist/navigator with over 19yrs post qualification experience. I have worked in various countries including USA, Saudi Arabia, Nigeria, Chad, Egypt, and UAE. I am experience in both marine, land, desert operations seismic surveys. I have also worked as a consultant client rep

Highly competent contracts administrator with extensive experience administering multi-million-dollar-dollar contacts for major projects in the power sector. Expertise includes managing pre-award contract management as well as post bid contract management incl. expediting.

I am Petroleum Geologist with +20 years experience in subsurface projects. These experiences cover mostly production geology, drilling operations and a few exploration projects. I was also involved in heavy oil projects, including drilling operations, well geostering and geocelular 3D geologic model

- Coordinating services e.g. directional drilling, fishing, drilling tools, liner hangers, packers, cementing, stimulation, wire line, geology, gyro survey, electro logging, etc. - Implementation of logging operations and witnessing the same. - Monitoring well profiles as per requirements (both Ge

Experience 14 years in Refineries (Fuels & Lube) as a Process Engineer to Technical Services Manager in India. 9 years in KNPC as a Process Design Engineer, in Project Department, implemented minor and major projects in 3 Refineries. 3 years in EPC Company, Canada, Designed SAGD utilities and SRU.

B.Sc. in Petroleum Engineering, 28 years work experience whereof 16 years in drilling supervision and operations, 4 years drilling engineering and planning.

Rigging & Lifting Specialist

Worked on onshore Oil collection & processing plants, Gas Plants, Offshore Platforms & FPSO during pre-commissioning and commissioning levels.

Over 30 years experience in Oil and Gas Petrochemical Industries onshore and offshore in the UK and overseas. Experience gained on various onshore projects, i.e. Power Plants, Chemical Plants, Pumping Stations, Alumina Plant, and Petrochemical Refineries ;BSc Mech. Eng..

Free! I am an International Sr. Well Engineer with a wealth of worldwide experience and knowledge. I have a Petroleum Engineering degree and 27 years in the industry. I want to continue to contribute to the technological challenges of the energy arena, particularly offshore, subsea and deepwater.

Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, North Sea, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration & development venues: prospect generation, new ventures andplay fairway

Marketing Leader

Qualification : B.Sc. Accounting and MBA Accounting and Finance. Experience : 18+ years experience in contracts and procurement (C&P) for oil and gas industry. Manages and executes all steps of the contracting processes, i.e tenderings to contract closures.

Drilling exploration production, per cv below

B.E. (Mechanical) - 1980

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out