Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #898 next resume »»
CONTACT INFORMATION:
View contact information...

PROFILE

A highly motivated individual with five years of hands-on
experience in design, start-up and troubleshooting of oil
and gas process plants together with excellent academic
performance in both graduate and undergraduate studies
with strong background in computational fluid dynamics
and computational heat and mass transfer

PROFESSIONAL QUALIFICATIONS

* Sound knowledge of general refinery and oil and gas
production operations
* Strong background in designing, revamping and
debottlenecking of process plants using process
simulators
* Commissioning, start-up, operation and troubleshooting
of process plants
* Capability to instigate research proposals and conduct
new line of studies
* Interactive individual with strong interpersonal skills
both in leadership and teamwork
* Fluent in most common process simulators and general
utility software packages

ACADEMIC EXPERIENCE

UNIVERSITY OF OKLAHOMA, Norman, Oklahoma, USA
- Graduate Research Assistant, 2000 - present
* Conduct research in the area of Computational Fluid
Dynamics (CFD)
* Performed Direct Numerical Simulation (DNS) of
turbulent flow using parallel simulation codes on NCSA
supercomputers
* Investigated and modelled turbulent heat and mass
transfer
- Graduate Teaching Assistant, 2000 - present
Involved in courses: Process Dynamics and Control,
Numerical Methods
    
INDUSTRIAL EXPERIENCE

OIL REFINERY PANCEVO, Pancevo, Serbia
- Senior Research Engineer, Research & Development Dept.,
1999-2000
Led a team of experts on two major projects:
* Alkylation and Hydro-Desulphurization (HDS) Units
Revamp
* Feasibility study (technical and financial evaluation)
for the Refinery modernization
Kept the projects on schedule and budget

FOSTER WHEELER ENERGY LTD., Reading, United Kingdom
- Fluid Catalytic Cracking (FCC) Process Expert, 1998
* Built the FCC and Gas Concentration Unit simulation
model for the FCC Unit Development Study at the Oil
Refinery Pancevo    

OIL REFINERY PANCEVO, Pancevo, Serbia
- FCC Process Engineer/Process Engineer, 1995-1998    
* Performed process monitoring and troubleshooting of
process units
* Optimized Crude/Vacuum Distillation Unit and FCC Unit
yield
* Conducted performance test runs for main process
equipments of the units
* Involved in start-ups and shut-downs of the FCC Unit
* Simulated steady state operation of columns and heat
exchangers
* Coordinated with equipment and catalyst vendors

ACHIEVEMENTS

* Developed application software for Condenser Design in
Petrochemical Industry
* Developed software for Operating Regime Planning for
Crude Distillation Unit
* Awarded for the application software at the
International Oil and Gas Conference, YUNG'97, V.Banja,
Yugoslavia, 1997.

EDUCATION

UNIVERSITY OF OKLAHOMA, Norman, OK, USA
Master of Science in Chemical Engineering
Expected Graduation date May, 2002, (Current GPA:
4.0/4.0)

UNIVERSITY OF BELGRADE, Belgrade, Serbia, Yugoslavia
Batchelor of Science in Chemical Engineering, 1995
Graduated with Honors. Ranked in top three students of
the class,(GPA: 3.81/4.0)

COMPUTER SKILLS

- Supercomputers:
* NCSA HP-Convex Exemplar, NCSA SGI/CRAY Origin 2000
- Operating systems:
* Windows 98/NT, UNIX, DOS
- Programming:
* Fortran77/90, C/C++, Visual BASIC, MATLAB
- Software:
* PROII/Provision, ChemShare, FLUENT, ASPEN, MS Office
- Worked on Honeywell TDC-2000/3000 - refinery control
room machines

PUBLICATIONS

Mitrovic, B., Papavassiliou, D.V., Transport Properties
for Turbulent Dispersion from Wall Sources, Proceedings,
AICHE Annual Meeting, Reno, Nevada, November 2001. (Paper
to be published)

Mitrovic, B., Atkinson, D., Papavassiliou, D.V.,
Lagrangian Scalar Tracking for DNS of Turbulent
Transport, Proceedings, 6th U.S. National Congress on
Computational Mechanics, Dearborn, Michigan, August 2001,
p. 334.

Mitrovic, B., Kovacevic, V., Serbanovic, S., New
Approaches for Condenser Design in Process Industry,
Chemical Industry Journal, February 1998.

Kovacevic, V., Mitrovic, B. "Catalyst and Process for
Conditioning FCC Gasoline", Proceedings, International
Conference YUNG '97, V.Banja 1997, p. 179-182.

REFERENCES
Available upon request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 6701 to 6750 of 10917)Go to Search Parameters...
Brief Description
Christo has been involved in Labour Risk Management, Organizational Development, Human Resources and Training in the private and public sectors for 18 years. His experience in the private sectors covered the broad Human Resources field and he has conducted management training in the public sector. H
WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O
10 years offshore oil/gas experience, Roustabout,Production Operator,Lead Production Operator
A sound technical chemical engineer with much back gound of marketing knowledge/ experience. Hence able to work techno-commercially
Strong experienced leader with very good communication, negotiation and analytical skills. Very familiar with related design software & MS Office applications. Looking for permanent/contract position as Senior Civil, Structural, Offshore pipeline or Project Engineer for Oil & Gas Projects
Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist
A Senior Electric and instrument Engineer with a wide range of experience in the copper smelter & refinery. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.
MSc in Petroleum Geology.
I have completed the post graduation diploma in piping engineering from suvidya institute of technology,mumbai in june-2007 and looking for piping job.
MechanicalEngineer
Diploma chemical Engineer 2Years Exprience in Automobile Paint Shop ,2years Exprience in Organic Chemical Manufaturing
Competent in Microsoft Office application, 2D Auto-cad Design, Good Oral and Interpersonal Skill, Excellent Administrative and Managerial Skills.
Experienced rigger welder with a host of offshore eexperience, a current Brazilians visa and extremely hard working. Available beginning April 2009
Certified Rigger, Welder helper, and Forklift driver.
Strong Communications skills, Micosoft- Word, Excel, Power point, Woking together well with people
ssc from govt boys high school hyderabad, pursuing b.a 1st year from Open univerisity hyderabad
Working in the field of Ndt since last 7 years, worked in various types of industries such as Petrochemicals, Petroleum and Construction fields.
Electrical Engineer-Inspector-Surveyors
PhD in chemical engineering. Expert in nanoparticle synthesis, surface modification, dispersion in polymer melts seeking research and development position in Richmond, Virginia.
SETP WINPCS SYSTEM USING C++ CODES. MODIFY P&ID USING AUTOCAD, SCHEDULE USING PRIMAVERA. GATHER ALL ENGINEERING DATA AND LOAD ALL IN WINPCS BY DISCIPLINE BY SUBSYSTEM.CERTIFY COMPLETED SYSTEM, HANDOVER MECHANICALLY COMPLETED SYSTEM FOR COMMISSIONING. PREPARE ALL HAND OVER DOSSIERS BY SYSTEM.
New Construction Surveys, Surveys on Jack-up rigs, Drill Ships, Semi-submersibles, Tankers, Bulk carriers, Offshore support vessels, Vendor Surveys, Welding and NDT Inspector, presently under training as ISM/ISPS Code Auditor
For the past Nine years I have been working as a Land Surveyor, I have acquired persuasive techniques that are needed to become a specialized Land Surveyor for buildings and infrastructure.
Bachelor in Mechanical Engineering, 7 years of experiences in Open Hole Completions (Liner Hanger), Case Hole Completions & Thru Tubing (Milling, Inflatables and Whipstock)
complete mechanical design & detail engineering of pressure vessels, heat exchangers, columns, reactors, jacketed vessels, refractory lined equipments, storage tanks, silos/bins & structural skids etc.
I am working as operation engineer in Pak-Arab Refinery (PARCO) Pakistan since 2001
CEMENTING OPERATOR
Reservoir Engineer/Reservoir Simulation Engineer/Completion Engineer
pursuing MSc(Applied Geophysics) from IIT Bombay
I am interested in applying for a position as a Health & Safety Technician. My expertise lies in the design and implementation of safety programs for the Oil & Gas, Mining, and Construction industries as well as Refinery/Power generation facilities.
Process engineer with offshore, process, utility and storage experience
Experienced senior field QC Seismologist in desert, arctic and shallow water OBC. Comfortable with all aspects of in-field QC, including data processing, source/receiver attribute analysis, survey design and planning and reporting. Exp in Tango, GeoCluster, Geoland, Mesa, Perl, LabView, Testif-I.
It’s of my great pleasure to apply my resume at your respect company seeking for hiring qualified personnel as a Corrosion and Inspection Engineer.
Critical Care Paramedic
I have 11 years of working experience. I have worked all stages of Operation & Maintenance, troubleshooting and Production handling independently. I don’t have experience in offshore.
I have recently relocated to Southern California from Houston Texas. I am willing to travel, and can easily relocate anywhere in the United States. I am very flexible and able to start immediately.
To obtain a position in the field of Chemical Engineering and its related fields that will utilize and nurture my skills and knowledge.
Industrial Engineer seeking position in the field of Industrial and Systems Engineering.
CWI-Pipeline All Pipeline inspection Welding Inspection Senior Welding Inspector Chief Inspector Job Superintendent
ddd
OBJECTIVE To obtain a position as a process engineer where my skills, experience and qualifications can be fully utilized to our mutual benefit.
To join a progressive organization which offers upward mobility, both financially and professionally.
I have knowledge in Maintenance and Operation procedures. My experience is in PM's, Reliability, Planning & Scheduling. I would like to continue to grow in the Petroleum Industry and at present I am continuing my education in Operation Controls. I am also very interested in offshore or shift work.
Logging Supervisor Well Site Petroleum Engineer, Well service Engineer Production technologist Engineer at Al Furat Petroleum Company
The purpose of this resume is to further my efforts to obtain employment in the Petroleum/Oil/Gas industry. Thank you for your time and consideration.
I'm a Control and Instrumentation specialist, interested in contract/permanent work anywhere in the world. I've got extensive experience in instrumentation (13yrs) and have contracted in various capacities on contracts in Africa (South Africa and Mozambique)
I have a B.S. in Petroleum & Natural Gas Engineering. I also posses excellent analytical skills in exploration and production modeling. I am also able to prepare and evaluate complex life-cycle development schemes, pursue ambitious exploration and appraisal strategies.
Seek a position in the area of finance that is both challenging and rewarding. The position should offer professional and personal growth.
To Work with a leading organization providing excellent learning and opportunities to work as an effective team member.
I earned a B.S. Engineering Science degree in 2001. My degree is a combination of mechanical, civil, and electrical coursework. I am not looking industry specific.
highly qualified and skilled chemical engineer with 5 years of hands-on experience in oil and gas industry looking for a contract or full-time position in the petroleum industry in the united states or europe.
First   Prev   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   132   133   134   [ 135 ]   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com