Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #9019 next resume »»
CONTACT INFORMATION:
View contact information...

SUMMERY & OBJECTIVE
I am from Egypt. I obtained a B.Sc. degree in electrical engineering (Communications and Electronics) from Alexandria University in 1995, and a M. Sc. degree in electronics and communications engineering from Mansoura University in 1999. I am working in ECMS (MobiNil) as a Project Manager since March 2000. Concurrently, working towards Ph.D. degree in the filed of advanced multi-user interference cancellation receivers for 3G cellular DS/CDMA systems. I would like to build my career in a challenging working environment and supports people with innovative ideas. I am looking for an organization, which is able to exploit my technological expertise. I am ready to relocate and travel abroad.

PROFESSIONAL EXPERIENCE
(3/2000 – present) (MobiNil) Project Manager
*I am responsible for whole delta region in MobiNil network since March 2000. This region is served by around 10 Motorola BSC, one Alcatel BSC, 10 PCU, 20 RXCDR, 350 BTS sites, 360 Microwave links, and one 1000 E 10 Alcatel MSC.
*Major activities including but not limited to, liaise with and supervise vendors, subcontractors, and telecom Egypt ensuring the highest standards are achieved and provide L2 support to the engineers on site, whilst achieving service targets of new entities.
*Supervise installation, commissioning and integration of GSM infrastructure and transmission backbone and responsible for testing and acceptance.
*Sound knowledge with BTS coverage, transmission routing, GSM network backbone and line of sight problems.
*Motorola and Alcatel (BTS, BSC, RXCDR, and PCU~GPRS) maintenance, operation, calibration, acceptance, and L2 support to subcontractors.
*Solid understanding of BSS engineering, planning, and network capacity enhancement via upgrading and reconfiguration (i.e. BTS, BSC, RXCDR, and GPRS).
*Strong knowledge with GSM principles, architecture, and infrastructure (Motorola and Alcatel).
*Transmission systems technical support:
oMicrowave, PDH (Nokia FlexiHopper, Alcatel A9400 UX, and Sagem), oSDH (NEC SDH system)
oOptical Fiber (Telecom Egypt side) (Alcatel and Siemens)
*Cooperated in network optimization, RF, interference analysis, and antenna engineering.
*Improving network performance via reducing NUR, efficient alarm handling, and robust control of subcontractors.
*Good knowledge with NOC (OMC-R), NMS systems (Nokia, Alcatel, and NEC), NSS (Alcatel SSP and RCP), and interfacing with BSS.
*Experienced in test equipment i.e. frequency counters, power meters, PCM analyzers, protocol tester (Tektronix K12), Sitemaster (Anritsu), Signal generator (HP), and spectrum analyser.
*Developed calibration software for Motorola TRX modules resulting in reducing outage time.

Achievements
*Network growth from 50 sites to 350 sites/region
*Reduced region NUR (Network Unavailability Rate) Fm. 300 To 2 /week
*Traffic increased up to 12000 Erlangs/ region

(2/1998 – 2/2000) Delta Electricity Company (DEC) RF Systems Engineer
*Prepared tenders specifications for wireless and communications infrastructure (HF, VHF, UHF, MW, PABX and SCADA) and negotiated contracts and discounts with vendors.
*Supervised wireless communications equipment installation work.
*Wireless Communications Equipment (HF, VHF, UHF, MW) acceptance, programming, testing, maintenance, and installation.
*Engaged in the implementation of the control centre to wireless SCADA system.

(3/1997–2/1998) Systel (Motorola Sole Agent in Egypt) RF Pre-&Post-Sales Systems Engineer
*Designed wireless networks in HF, VHF, and UHF bands (Two way radio communications, Trunking Systems (Motorola SmartZone and MPT Trunking), SCADA systems, GPS, and Paging Systems).
*Conducted customer solutions, offers, bids, and proposed the best technical and economical compromise to the customer with Motorola solutions plus direct technical and financial negotiation with customers.
*Customer education, training, and system/application engineering service assignments which delivers technical expertise for solution implementation to customer based on Motorola products.
*Established relations with new vendors and customers (i.e. California microwave, Samsung, etc….)

EDUCATION
* PhD in Communications and Electronics Engineering, Oct. 2001 - present
"Multiuser Interference Cancellation for Cellular DS/CDMA Systems," Mansoura University
* M.Sc. in Communications and Electronics Engineering, Sept. 1996 - Oct. 1999
"Computer-Aided Analysis of Electromyographic Signals" Dept. of Comm. Eng., Mansoura University
* B.Sc. in Electrical Engineering, Sept. 1990 - June 1995
Dept. of Communications and Electrophysics, Faculty of engineering, Alexandria University

TECHNICAL SKILLS
*Cellular systems (6 years), and transmission systems (Microwave and Optical Fiber) (8 years)
*Trunking Systems (MPT and SmartZone Trunking), Wireless SCADA Systems (MOSCAD & ULTRAc)
*DSP for communications, DS/CDMA and spread spectrum, multiuser interference suppression, antenna arrays, beamforming algorithms, and space-time processing.
*C ++ and object oriented programming (4 years), Matlab (8 years), and Visual Basic 6 (2 years)
*MS Office XP (MS Word, MS Excel, and MS Power Point), Windows 98, XP, and NT.

TRAINING COURSES
Technical
*Attended Alcatel Evolium BSS Training Courses with the following titles (Fm. 9/7/04 to 12/7/04)
oAlcatel A9100 BTS (G3&G4) and Alcatel A9110 Micro BTS
oAlcatel 9125TC & G2 TC and BSC
*Motorola GPRS Training Courses with the following titles (Fm. 17/8/03 to 21/8/03)
oBSS 101 "CPU Operation and Theory "
oBSS 102 "PCU Installation and Maintenance"
*Nokia Training course on Network Management System (NMS 10), release C5.1 during the period of 15th to 17th Jan 2003
*Alcatel Training course on Operation and maintenance of the PDH Microwave Equipment A9400 UX and of the Network Management System A 1353 SH (Fm. 10/12/02 to 19/12/02)
*Attended NEC SDH MW System on job Training courses (Fm. 10th to 18th March 2002) with the following Titles:
oPASO-S SDH MW System oADM 150C, 150V, 600V with win-LCT software oPNMS and NMS management software
*Nokia Training Course on Nokia FlexiHopper Digital Radio Microwave Links on 24th to 27th April 2001 (Product overview - Installation - Commissioning – Operation & Management).
*Motorola BSS Training Courses with the Following Titles oCP02 - Introduction To Digital Cellular on 1st To 2nd May 2000.
oBSS08 - BSSC Applications on 3rd To 4th May 2000.
oMC09 - BTS Products Technical Appreciation on 7th to 9th May 2000.
oBSS 12 Operation and Maintenance on Oct 23-25,2002.
*Motorola training courses on MPT trunking, 5-Tone signalling, and maintenance of privacy plus radio series (Systel, Marriott Hotel).
*Zetron products overview seminar on 31st Jan. 1999 (Marriott Hotel)
*Digital Electronics Course (DEC on Jun. 12th 99:Jul. 1st 99)

Management
*Presentation Skills Course (Conrad Hotel, Fm. 20th to 22nd Dec. 2003) by OMNI Training.
*Technical Report Writing Course ( Conrad Hotel: Fm. June 23rd to 24th, 2003) by American Management Association International (AMA).
*Project Management Course and MS Project (Fm. Oct. 12th to Oct. 14th, 2002) by AMA.
*Stress Management Course (Conrad: Fm. 18/10 To 19/10/2000) by Leaders for HR Development.
*Project Management for Administrative Professional (Four Seasons: Fm. 13/3:14/3/2000) by AMA.
*Advanced Conversational Course (English) -25th May – 29th July, 2003, by The International Language and Computer Centre (ILC)

Conferences
*Attended ISPACS 2003 conference, Awaji Island, Japan, Dec. 7-10, 2003 to present my paper entitled "A Novel Adaptive Blind Multiuser Receiver for DS/CDMA Based on combined Inverse QRD-RLS Algorithm and constrained Optimization Approach" and also to chair the OFDM session.
*Attended MWSCAS 2003 Symposium, Cairo, Egypt, Fm. Dec. 27-Dec. 30, 2003 and present my paper entitled "Computationally Efficient Real-Time Blind Multiuser Detection for Cellular DS/CDMA Based on Inverse QRD-RLS Algorithm and Subspace Tracking".

LANGUAGES
*English (V. Good) Arabic (Native)

PUBLICATIONS
[1]A. Elnashar, S. Elnoubi, and H. Elmikati "A Robust Quadratically Constrained Adaptive Blind Multiuser Receiver for DS/CDMA Systems" has been accepted for presentation at the IEEE International Symposium on Spread Spectrum Techniques and Applications (ISSSTA 2004), Sydney, Australia 30 Aug 2004 - 3 Sept 2004.
[2]A. Elnashar, S. Elnoubi, and H. Elmikati "A Novel Adaptive Blind Multiuser Receiver for DS/CDMA Based on combined Inverse QRD-RLS Algorithm and constrained Optimization Approach" ISPACS 2003, Awaji Island, Japan, pp. 423-428, December 7-10, 2003.
[3]A. Elnashar, S. Elnoubi, and H. Elmikati "Computationally Efficient Real-Time Blind Multiuser Detection for cellular DS/CDMA Based on Inverse QRD-RLS Algorithm and Subspace Tracking" MWSCAS 2003, Cairo, Egypt, December 28-31, 2003.
[4]A. Elnashar, S. Elnoubi, and H. Elmikati "Robust Adaptive Blind Multiuser Receiver for DS/CDMA Based on combined Inverse QRD-RLS Algorithm and MOE" SOFTCOM 2003 conference, Croatia, pp. 512-515, Oct. 2003.
[5]F. E. Z. Chadi., A. Nashar, and Dr. M. Saad. "Automatic Analysis and Classification of Surface Electromyography," Frontiers Med. Biol. Engng., Vol. 11, No.1, pp. 13-29 (2001).

View contact information...
«« previous resume next resume »»
Search Results (Resumes 9501 to 9550 of 10923)Go to Search Parameters...
Brief Description
laboratory, mechanical, electrical, computer, supervisory and leadership skils
13 Years with Onshore & Off shore, OIL & GAS refinery & Shutdown .
Civil Engineering graduate with over 16yrs of experience in Civil Works (12yrs in Middle East) with a versatile potential to utilize & develop the vast experience gathered in the field of pipelines & infrastructures, dedicated to contribute the best efforts for growth of the company.
I am aged 27years and diploma holder in fire fighting Engineering, and have 2years experience in safty feild
I have 10 years experience in instrumentation and control field. I have designed, installed, tested, calibrated, start up, commissioned, maintained and repaired industrial electrical and instrumentation control systems and skilled in PLC, DCS, Programmable drive based control systems.
PVT ANALYST 2 years experience .. I am a highly motivated individual seeking a position in the oil and gas industry. My leadership capabilities and my willingness to learn and adapt to new jobs will make me a valuable asset to your company .  
I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro
Civil engineer, Project Manager, contract Manager
Expertise in SIEMENS PLC & SCADA, B.E. (Electronics) from University of Pune
Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.
For the past 11 (Eleven) years of my working experience as Equipment Site Supervisor/ QC Inspector/QC Supervisor, I had gained experience & Knowledge on Quality Awareness. Performing Hold, Witness & Surveillance inspections based on standard requirements and other related presentations
Safety CSSS/CSST NCCER #3403930
Strategic thinking Executive leading environmental, health and safety area. Recognized for assessing environmental, health and safety protocol, formulating and implementing highly effective policies, procedures and training to meet compliance, minimize injuries & reduce worker’s compensation claims.
I am having industrial sales experience of around 8 years in Hydraulics & filtration system & its component sales.
Highly skilled engineering and construction management professional.
Qualifications: B.E (Mechanical). Graduated with second class, first division honors. Have an MEP consulting background with over 2 years experience. Advanced in: AutoCAD, Solid Works, Excel, Visual Basic programming, Word, TRACE heatload and Matlab programming.
MSc environmental sciences with a strong focus on air pollution and health risk assessment
Well experienced in Document Controller & Secretarial jobs in Construction and Petrochemical companies in different Gulf countries. Knowledge of operating M.S. Office and Acconex. Currently working as Document Controller in Dubai Metro Rail Project, UAE since 1-1/2 years.
Electrical engineering major in power .
As Geosciences Engineer, 13 years of experience. Exploration and Production mines
Good interpersonal and communication skills, Counseling and persuasive ability,Good quality report writing and typing speed, Public speaking and presentation capacity, Proficient use of spreadsheet software and Microsoft Office suite such as MS-Word, MS-Power point, MS-Access and MS-Excel,
Electronics and communication Engineer
Experienced Mechanical supervisor with over thirty years spent employed in the middle east.
GSM/CDMA Project Manager
Safety Supervisor , HSE Supervisor for all oil/gas, Pipeline, Offshore Construction, civil Construction
Installation and commissioning, project management
16 years Safety Construction, Developer of Behavior Safety Assurance Formula, Bs Occupational Safety and Health
Comprehensive problem solving ability, excellent verbal and written communication skills, willing to learn and team facilitator
Of particular note for you and the members of your team as you consider the placement of a position are my strong accomplishments in my ability to operate a forklift while loading or unloading freight, production and/or shipping experience and completing orders and supplier subcontract parts.
Respected Sir, I have come to know through some of my close sources about the post of a rig worker Under your kind control & I am applying for the same by forwarding my curriculum vitae. I am requesting you to please give me a chance.
i had just completed my B.Tech in electronics and instrumentation engineering from IET bhaddal punjab state india. My six months industrial training was on PLC Programming and working, installation and troubleshooting of field sensors interfaced with PLC's OR PC's.
Experienced & Seasoned Engineer
General Accountant/Financial Reporting
Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.
More than 10 years of rich, in-depth, varied experiences in the field of Project Quality Assurance / Quality Control, Project coordination, execution, Testing and Pre-commissioning of diverse E & I and CP system activities in Refineries, Oil & Gas Plant (Onshore & Offshore), Fertilizers Plant, etc.
I am a target oriented person with vast experience in Oil and Gas Construction Projects, I have experience in the safe Erection, Dismantling and Modifications of all Scaffolds in accordance with BS 5973 Standards, Inspection of scaffold materials and fall protection systems, documentation of scaffol
Honest, proactive, innovative, safe, persuasive
Contracts Manager
Civil Engineer with Project Control experience and knowledge of Primavera (P3)
MSc Petroleum Engineer
A hard working and dedicated recent graduate with proven organizational skills and practical experience in geological field work. Effective leadership skills and a cooperative team player with the willingness to learn. Can be relied on to get the job done. Seeking a geologist position.
Intend to build a career with leading corporate with committed & dedicated people, which will help me to explore myself fully and realize my potential. To be a part of dedicated, goal-oriented problem solving team.
Senior Contract Engineer Trilingual English/French/Spanish Oil and Gas industry, experience in Africa, South America, Europe. Working for a major international engineering company. Mainly contract formulation and admin. but also project and construction management, cost control and planning.
Mechanical Engineer with experience in Oil, Gas and Industrial air filtration to meet ISA standards
A broad professional knowledge and experienced in Civil QA/QC and Field Engineering Construction in infrastructure, defence and oil/gas/petrochemical plant construction projects.
Chemical engineer with 3 years of experience in the fields of R&D, pilot plant, process design, basic & detailed engg., project management & procurement in chemical, bulk drug & pharma industries
water and waste water power plant, steam, laboratory, analysis chemical chemist
Unloading trailers, Recieving, shipping of product, conduct daily activity of 12 employees in a warehouse, some knowledge of mechanical and electrical systems, some knowledge of computer systems, capable forklift operater, class b license.
Human Resources/Recruitment Internal & External/Projects - Systems Coordinator Overseeing of Project Managers & Their Teams Aust & Oversees/Mining & Gas Industry/Management/OHS Rotational shifts/FIFO/Shift Work. I have just returned from Nauru where my partner was the Operations Manager in the Mines
A chemist with technical skills trainings in Industrial Process Controls, Advanced PLC, Hydaulic Industrial Controls, PLC, Electro-Pneumatics, Calibration for Process Instrumentation, Advanced Industrial Motor Controls, Pneumatic Industrial Controls & Industrial Electrician
First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   [ 191 ]   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com