Resume - A consulting petroleum engineer / project management position in a challenging e...

Misco Jobs

Resume #920

CONTACT INFORMATION:
View contact information...

OBJECTIVE: A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.

EDUCATION:
Bachelor of Science, Petroleum Engineering
December 1986
The University of Texas at Austin
G.P.A. in concentration 3.97/4.0

EXPERIENCE:

Quatro Oil and Gas - Wichita Falls, Texas
Contract Petroleum Engineer. Provided field supervision for various drilling, completion and remedial activities. Performed waterflood engineering and surveillance for improved recovery on Quatro’s existing properties. Evaluated hydrocarbon reserves and provided economic projections on numerous properties for possible acquisition. February 2001 to present.

Waggoner Barbados Ltd. - Barbados, West Indies.
Joint Venture Project Manager. Charged to increase both oil and gas production to improve the profitability of the joint venture. Daily activities included direct oversight of drilling, completion and production activities, as well as joint venture contract administration and monitoring of inventory and accounting processes. Milestones during this period include: Designed and supervised over 50 frac-pac treatments, treatment size varied from less than 30,000 lbs gravel to over 250,000 lbs gravel. Refined “Tip Screen Out” frac-pac technique for Barbados operations. Designed, specified all equipment and services, and supervised the drilling and completion of the first two medium radius horizontal wells drilled on the island. Instrumental in the upgrade of the existing gas plant and installation of a new field wide gas gathering system. September 1998 to February 2001.

Baker Hughes INTEQ - Cameroun, Equatorial Guinea, Chad, Angola.
Country/Operations Manager. Manage and direct complete BHI product and service line. (Product lines same as below). Clients worked for during this period include: Exxon, Chevron, Elf Serepca, Pecten (Shell Western), Mobil E.G., United Meridian Corporation, CMS-NOMECO, and Kelt. Milestones during this period include: Construction of 7000 bbl OBM plant. Repair and upgrade of barite grinding mill. Restructuring of local operations for increased profitability. Drill and complete 20 plus directional and horizontal wells. July 1996 to August 1998.

Baker Hughes INTEQ - Oman.
Country/Operations Manager – Drilling Coordinator. Manage and direct complete BHI product and service line in Oman. Operations include all phases of directional/horizontal drilling; standard and high level MWD service, gravel packing, tubing conveyed perforating, drilling and completion fluids, mudlogging, and coring. Clients worked for during this period include Petroleum Development Oman (Shell), Occidental of Oman, and Japex of Oman. Milestones during this period include drilling over 600 medium radius horizontal wells, 15 short radius horizontal wells and numerous directional wells. Directly involved in numerous total well design initiatives which included developing the “Deep Seat Casing” design for South Oman and the “Electric Submersible Pump Horizontal Well” design used throughout Oman. These are examples of work done, which both reduced drilling costs and improved production for the client.
November 1992 to July 1996.

Eastman Christensen – Midland, Texas.
District Drilling Engineer/DDS. Design and implement directional and horizontal drilling programs throughout the Permian Basin. Directly involved in the redevelopment of the prolific West
Texas Yates field through the use of short radius drilling technology. May 1991 to November 1992.

Oryx Energy Company (formerly Sun Oil) - Midland, Texas.
Drilling-Production Engineer/Drilling Field Supervisor. Assist in design and supervised all phases of drilling and completion for over 10 oil and gas wells including construction of surface production facilities. Supervised numerous workovers and recompletions. Predominately worked in West and Central Texas and South-eastern New Mexico. Minor involvement in Sun’s Austin Chalk horizontal play as a rotating supervisor. January 1987 to May 1991.

Sun Oil Company, Offshore – Houston, Texas.
Drilling Engineer. Offshore. May 1986 to August 1986.

University of Texas at Austin
Student August 1982 to May 1986, August 1986 to December 1986.

Zenith Drilling Company, Unit Drilling Company, Lloyd Jones Drilling and Well Service, Beckman Well Service. Texas and Oklahoma Panhandles. Floor hand, derrick hand and driller. January 1977 to August 1982.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 9906)

Go to Search Parameters...

Brief Description

MAINTENNACE PLANNING / MAINTENANCE /PROJECT/CONSTRUCTION

Piping Designing / Mechanical Draughtsman including development of Layouts, Details, Isometrics, P&IDs etc. as per piping specifications for Onshore, Offshore, Refineries, Process Industries, Chemical, Power and Desalination Plant.

BE. Professional with 15 + Years of Sound Exposure in Project management, Engineering services, utility Operations, Erection, commissioning & Management

Mechanical and Marine Engineering. - Experience in Diesel Engines, Generators, Gas Turbines and Steam Turbines. - Experiences in Computerised Maintenance Management System (CMMS) and PMS - Electronic Maintenance Management System.

I am urgently looking for a job on an Oil or Gas rig. I have a high school and Waste Management diploma. I also have 23 years of experience in managemet. I am willing to learn new skills

Production and exploration test ranging from high volume critical sour wells incorporate multiple separators, line heaters, circulating and transfer pumps, to sweet shallow gas testing. Experienced in well testing with high content of H2S, CO2. Experienced in HP/LP separators, pumps and oil producti

Effective communication, team building, annovative

Electrical Technician, Ross Hill and IPS SCR drives, Varco Top- Drives

Mechanical Supervisor(Power Plant). Have work experience in Pakistan Navy also.

Shift supervisor in LNG plant, commisionning engineer; productio manager, project maager

Having 11 years of rich experience in Project coordination and Procurement of Oil and Gas EPC projects.

Over 11 years Elec & Instrument &Control Engineering and Detail Design in Downstream Oil&Gas,Petrochem, Energy. Field Instrument Specs, Construction Dwgs, Site Supervision, FAT of Control Systems, Supervisory Role.

I am a Senior Structural Engineer with detailed design, field engineering, fabrication supervision and hook-up experience in the offshore oil and gas industry. I have gained a solid technical background and practical outlook by working on site in the oil and gas industry.

The solid luggage of my experience and my expertise in the exploitation and trainee, having formed with the most powerful methods and having applied them successfully, I am seeking a position to contribute for the progress of a leading multinational organization. I am presently in the retirement and

Expert in Well Stimulation (Hydraulic Fracturing, Acidizing) and Sand Control and highly experienced in sand face completion, production optimisation and FDP

I have done three years course in CHEMICAL(Plant Operation),NCVT, From Bhandara (Maharashtra) and having over 21 years of experience( Three years gulf expereance) of PreCommissioning/Commissioning of Petrochemical Gas(gasco, buhasa) And Chemical plants.

Laborer

I have 26 years Welding experience, including 3 years Fabrication, Welding and Maintenance on Oil & Gas Drilling Rigs, associated equipment and infrastructure. I am currently employed as a Welder for Drilling Contractors on an onshore Oil & Gas Rig at Fairview Gas Field with a 2 on 2 off roster. My

Training Coordinator, over (16) years of experience in petrochemical plant operations, and over (2.5) years of experience in the field of training.

HSE technician, Safety officer, HSE Advisor

Piping Designer PDS administra

Sixteen years of experience in Design and Analysis of offshore and onshore structures. Varied Experience in design of structures from Fixed offshore platforms, FPSO, Refineries to concrete structures. Working experience in various multinational engineering firms and various working locations.

Chemical Engineer having 15 years of experience in Refinery. Skills possesed include in depth knowledge of process design using simulation software and knowledge of various international codes.

Operations Manager - 18-yrs experience - Russia, China, SE Asia, Europe & US. Background in drilling, production & well servicing. Experienced with G&G & reservoir. Extensive experience in tendering & contract negotiation. Line management responsibility of budgets of >$250M.

Having a Diploma in Mech. Engg. with 18 years of Experience in Designer

Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.

I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.

Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring

6 years overall experiance in oil & Gas / Petrochemical Industries

A Chemical Engineer (B. Sc., M.Sc.)

I have 9 yrs experience as a Planning Engineer in Oil and Gas sector, please let me know if any suitable vacance available for my knowledge and Experience.

Now i'm working in Qatar as a store keeper, i have more than 6 years experience in this field , i'm working in oil field project

* A Petroleum Geoscientist with strong IT background having 10+ years full cycle experience of exploration & production industry with multinationals such as Eni, CGG and Lasmo Oil.

Seeking a challenging career as a Reservoir/Petroleum/Production Engineer in an E&P Company

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.

18 years experience in process design of refinery and petrochemical units.

Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.

Expand on my knowledge, skills and abilities to grow both personally and professionally making genuine impact in the organization. I like to be part of a geological, geophysical and petroleum engineering team that uses all disciplines to meet their goals.

I am a chemical engineer having over 18 years experience (8 years in Petroleum Development Oman – a Shell Group Operating Company) in the Exploration & Production petroleum industry covering onshore as well as offshore locations, particularly in Well Services operations in Oman and India.

A talented multi-lingual business professional with more than 10 years expertise in domestic/international business, market, and product development increasing market share by 30% and sales by 20%

A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.

I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.

More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.

6 years experience in the field of Mechanical, Piping Engineering Design / Drafting. A variety of successful projects for oil & gas, chemical and cement plants. Design, Drafting, CADD, and checking experience that includes supervision, conceptual layout, piping design, pipe supports, fabrication dra

Instrument and metering technician

level-1 licensed engineer in PHWR operation having 10 years of experience

Open Hole and Cased Hole Field Engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out