Resume - I was responsible for maintenance, operation, and repair of all vessel electrica...

Misco Jobs

Resume #9391

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

Seeking a position as a Maintenance Manager where my experience, training and good habits will be an asset to your company.

PROFESSIONAL EXPERIENCE (+ 26 years )

* 05/2009 – 06/2009: Gabes Marine Tankers, Tunisia
* 04/2007 – 08/2008: Reduan Ferry, Morocco
* 08/2006- 01/2007: MARCAB, Morocco.
* 08/2005 - 11/2005: ROLO Maritime, France
* 10/2003 - 05/2004: COMARIT, Morocco,
* 06/2002 - 09/2003: Self employer
* 10/1988 - 04/2002: COMANAV, Morocco.
* 07/1987 - 07/1988: MARPHOCEAN, Morocco.
* 05/1985 - 08/1986: SONAMA, Morocco.
* 08/1982 - 05/1985: COMANAV, Morocco

REPAIR AND MAINTENANCE:

I am able to maintain the ship in a state of readiness at all times. I oversee and maintain systems including engineering, deck and hotel following preventive maintenance program on daily, weekly and monthly basis with the support of the assistant Engineer
I have participate in many shipyard.

SUPERVISORY:

Direct supervision of Assistant Engineer and all other !!engineers
Monitor and counsel work performance throughout the year, and conduct annual written performance evaluations
I have trained new assistant engineer

ADMINISTRATIVE:

I keep vessel maintenance records, inventories and file trip reports. Make proposals for maintenance and repair projects.
I maintain up to date logs for all equipment and communicate with port Engineers frequently.
Oversee all accounting requisitions regarding equipment maintenance.

SAFETY AND SECURITY:

I follow company safety and pollution prevention policies and procedures and will request supervisory assistance/guidance when necessary.
I conduct periodic inspections to ensure that crew observe regulations pertaining to safe vessel operation.
I prepare the vessel for all national and international annual inspections and other periodical dry-docks.
I participate in shore side training as required by the company;
I am familiar with the ISM Code and its requirements.
I am familiar with all duties under the company Safety Management System including Emergency Response activities

QUALIFICATIONS:

The requirements listed below are representative of the knowledge, skill, and ability required.
I am Maritime Engineering Graduate in good standing.
I have 20 years plus experience as engineer on almost kind of ships.
I have strong knowledge of Diesel propulsion and electricity generation systems. Also have knowledge support systems such as fuel centrifuges, air compressors, pumps, hydraulics, pneumatics, water makers, hotel systems, plumbing, welding, refrigeration, heating, and air conditioning.
Personal computer experience/ Excel, Word.
Professional demeanour; ability to use appropriate levels of tact and courtesy.
Strong time management skills; able to handle multiple tasks, set priorities and meet deadlines.
Crisis management; work well under pressure, act quickly and decisively using sound judgement.

COMMUNICATION SKILLS:

I have some passenger contact and I am professional and have the ability to present information and respond to questions. Ability to read, analyse and interpret professional journals, technical procedures, or governmental regulations in English and in French. Able to provide concise and clear reports as required.

REASONING ABILITY:

I have the ability to define problems, collect data, establish facts, and draw valid conclusions

LICENSES, CERTIFICATES, REGISTRATIONS:

Jun 1998 ; 1st class Marine Engineer Officer delivered by ISEM, Casablanca ( Higher Institute of Marine Studies )
1985: 1st Class Duty Engineer Officer delivered by the Ministry of The Marine Merchant
June: 1st Class Cadet Engineer
June: A-Levels of Industrial techniques and mechanical manufacturing delivered by the Lycee Ibn Haitam

STCW 78/95 CERTIFICATES:

CERTIFICATES N° Issued on Valid until
CHEF ENGINEUR III/2 UNLIMITED 623.OM1.02 29-01-2007 28-01-2012
Advanced fire fighting 5822/02 29-01-2007 28-01-2012
Survival crafts and rescue boats 11380/04 29-01-2007 28-01-2012
Fast rescue boats 11379/04 29-01-2007 28-01-2012
Oil tanker familiarisation 16234/06 29-01-2007 02-01-2012
Oil tanker specialisation 16918/06 29-01-2007 28-01-2012
Ro-Ro passengers ships 15412/05 16-03-2009 15-03-2014
Basic Safety Training: 5821/02 08-07-2002 NA
1 Personal survival techniques at sea
2 Fire prevention and fire fighting
3 Competence in elementary first aid
4 Personal Safety and Social Responsibility
Training and Qualification of Officers providing of Medical Care on board
5823/02 08-07-2002 NA
Chemical Tanker Specialisation 20305/09 07-04-2009 06-04-2014

COMPANY SHIP NAME Main Engine GWT POWER (HP) TYPE
FONCTION SIGNING ON SIGNING OFF

Gabes Marine Tankers Lady Jasmine Sulzer 16985 12000 Tanker
1° Engineer 19-05-09 27-06-09
REDUAN FERRY BENI SIDEL MAN 11530 17800 CAR FERRY
CHIEF ENG. 03-03-08 08-08-08
REDUAN FERRY BENI SIDEL MAN 11530 17800 CAR FERRY
CHIEF ENG. 04-12-07 28-01-08
REDUAN FERRY BENI SIDEL MAN 11530 17800 CAR FERRY
CHIEF ENG. 01-04-07 02-10-07
MARCAB ADRAR MAK 1807 2100 Oil TANKER
CHIEF ENG. 25/07/06 02/01/07
ROLO Maritime RORO STAR PIELSTICK 10292 11400 RORO
CHIEF ENG. 08/08/05 26/10/05
COMARIT BILADI PIELSTICK 18913 23400 CAR FERRY
CHIEF ENG. 04/03/04 07/05/04
COMARIT BILADI PIELSTICK 18913 23400 CAR FERRY
1° ENGINEER 10/10/03 26/02/04
COMANAV AL MANSOUR MAK 11717 23400 CAR FERRY
1° ENGINEER 19/09/01 31/01/02
COMANAV AL MANSOUR MAK 11717 23400 CAR FERRY
1° ENGINEER 11/04/01 17/07/01
COMANAV AL MANSOUR MAK 11717 23400 CAR FERRY
1° ENGINEER 25/10/00 18/02/01
COMANAV AL MANSOUR MAK 11717 23400 CAR FERRY
1° ENGINEER 10/07/00 23/09/00
COMANAV AL MANSOUR MAK 11717 23400 CAR FERRY
1° ENGINEER 22/03/00 08/06/00
COMANAV AL MANSOUR MAK 11717 23400 CAR FERRY
1° ENGINEER 01/10/99 04/02/00
COMANAV OUALIDIA MAK 1593 3600 CONTAINER
1° ENGINEER 15/10/98 22/06/99
COMANAV TOUBKAL HANSHIN 5651 3400 BULK CARRIER
1° ENGINEER 17/07/98 16/09/98
COMANAV AZILAL MAK 7955 4846 RORO
1° ENGINEER 07/02/98 27/07/98
COMANAV OUAZZANE Mak 1536 3400 CONT
2° ENGINEER 08-08-97 04-12-97
COMANAV MIDELT Mitsubishi 2825 8000 REEF
2° ENGINEER 14-02-97 14-05-97
COMANAV OUARZAZAT Mak 1536 3400 CONT
2° ENGINEER 06-07-96 25-12-96
COMANAV OUARZAZAT Mak 1536 3400 CONT
2° ENGINEER 22-05-95 01-09-95
COMANAV MICHLIFEN Mitsubishi 2990 8000 REEF
2° ENGINEER 25-11-94 06-03-95
COMANAV MICHLIFEN Mitsubishi 2990 8000 REEF
2° ENGINEER 30-07-93 18-12-93
COMANAV TOUBKAL Hanshin 5651 3400 B/C
2° ENGINEER 30-07-93 30-09-93
COMANAV MIDELT Mitsubishi 2825 8000 REEF
2° ENGINEER 21-11-92 02-05-93
COMANAV TAZA Hanshin 5654 3600 B/C
2° ENGINEER 22-05-92 14-10-92
COMANAV OULMES Mak 1593 3600 CONT
2° ENGINEER 08-12-91 23-04-92
COMANAV ANOUAL Mak 1576 3300 CONT
2° ENGINEER 30-07-91 24-08-91
COMANAV MICHLIFEN Mitsubishi 2990 8000 REEF
2° ENGINEER 19-11-90 02-05-91
COMANAV TAZA Hanshin 5654 3600 B/C
3°ENGINEER 14-04-90 02-09-90
COMANAV MICHLIFEN Mitsubishi 2990 8000 REEF
2° ENGINEER 24-03-90 14-04-90
COMANAV RIF Mak 6420 18000 CAR FERRY
4° ENGINEER 11-10-89 20-02-90
COMANAV TAZA Hanshin 5654 3600 B/C
3°ENGINEER 17-01-89 01-08-89
COMANAV MIDELT Mitsubishi 2825 8000 REEF
4° ENGINEER 27-10-88 03-01-89
MARPHOCEAN IBN ROCHD Pielstick 13514 7800 CHEMICAL
4° ENGINEER 12-02-88 22-05-88
MARPHOCEAN ADDARRAK Sulzer 16985 12000 CHEMICAL
3°ENGINEER 14-07-87 25-12-87
SONAMA SIJILMASSA Sulzer 6671 14850 REEF
3°ENGINEER 03-04-86 01-07-86
SONAMA CHIMISTE SAYID Mak 3079 4000 CHEMICAL
3°ENGINEER 25-05-85 03-01-86

Languages:
Arabic, French and English

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 10902)

Go to Search Parameters...

Brief Description

Adaptable, Versatile and highly experienced, Possessing excellent communication skilled at all levels, the propensity to empathize and get on well with people at all levels.Disciplined,Selfmotivated with the ability to motivate others, able to assimilate and retain information quickly, taking a po

I had a master degree in structural engineering from the University of Southern California.

Professional Maintenance and Integrity Manager

Quality Control Manager

30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.

Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.

Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer

An extremely talented Power Plant chemist with huge background in operating and maintaining Water Treatment plant . boiler water treatment , Cooling water treatment , steam and water analysis, lube & fuel oil analysis , coal analysis , Effluent Treatments and Environmental monitoring

Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.

Chief structural

Project Manager - FEED - EPC - PMC - Oil/Gas

Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing

CSWIP AUT/ASNT LEVEL III/AWS-SCWI INSPECTOR

As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.

I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.

Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.

More than 25 years in OIL & GAS Offshore and Onshore Industry.

Senior Geologist - Develoment Geologist - Advisor

Security operations,Health and safety,HR Management,General and strategic Administartion

Have more than 20 years operation and maintenance experience in the thermal and gas turbine power plants. Spent 10 years in a management role.

Marketimg & Project management of Oil/ gas skids

Thirty (30) years of engineering and safety management experience, 26 years of which were in the oil, gas and shipping industry and EPC projects that include the ff.: Project and HSE management, conceptual, feasibility and risk studies, basic and detailed design, safety and procurement.

Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation

Free! BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.

Over 20 years experienced professional petroleum geologist specializing in oil/gas exploration, development and production, 4 years into Business Development & Field/License Management Experience. Strength in Prospect Generation, Seismic Interpretation, Geological Modelling, Development Geology,

A highly acclaimed Drilling Superintendent, with a 21 ½ year track record of remarkable top level achievements in Oil & Gas Exploration industry, seeking a senior level position in Drilling Field with a growth oriented organization

Houston, TX based E&P software salesman w/proven quota attainment, 25+ years total experience, 13 yrs in sales

MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities

A Principle Port State Control Officer and Flag State Implementation. Work as part of a team. Posses a highly skill knowledge on Marine Petroleum.

Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.

Control System Engineer

Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects

Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.

Masters in Geology from the Azerbaijan State Oil Academy, Baku, Azerbaijan. I have worked as a Geologist with Petrobangla (a government owned oil and gas organization of Bangladesh) from 1981 to 1997. I joined International Logging Inc. Houston, USA as a Formation Evaluation Geologist

I wish to seek new challenges and broaden my horizons in the Oil Industry by utilizing experience gained over the last 20 years.

E&P Accounting Manager @Murphy Oil Corporation-14 plus years. Responsible for monthly/quarterly financial close and reporting of variances (month to month and forecast/budget). Interaction with Operations, Audit (internal/external).

International Procurement, Nego, Vendor Evaluation, ...etc

Mechanical maintenance trainer

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design

27 years experience in reservoir engineering, from field operations to pressure testing and simulation.

Dynamic, well-rounded IT executive, consistently promoted to positions of increased responsibility, set technology strategy to support business while simultaneously achieving more cost-beneficial enterprise-wide IT operations.

15+ work experience in the human resources development profession.

I am Aleem Khan working in Oil & Gas Industry for the Last 25 years in Operations. Have enjoyed at various positions including Production Manager, Production Team Leader Production Superintendent Operations Support Team Leader etc. Currently I am working in BP Oman. My current position Operating Man

A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c

SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills

Degreed electrical engineer with many years of experience in instrument engineering for oil production and refining, government facilities, water and wastewater facilities and nuclear sites.

CORROSION SPECIALIST & CHEMISTRY LECTURER

Operations engineer for oil and gas, shallow wells: drilling and workovers, projects evaluations.

Summary21years practical working experience in engineering design including in offshore and onshore and oil project.I worked at refrigerator, trawler,tanker,scientific and container ships.My professional experience has given me an in-depth knowledge of the El.Engineering in Marine/Petroleum branch

First 1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out