Resume - CHEMICAL ENGINEER with twelve years experience in production/process/project eng...

Misco Jobs

Resume #970

CONTACT INFORMATION:
View contact information...

CHEMICAL ENGINEER with eleven years experience in production/process/project engineering. This involves production support, conducting engineering investigations, troubleshooting, optimization, debottlenecking, process support/design and project management. Reduced off-spec product 20% by modifying reactor model to better predict product physical properties. Designed a system to debottleneck and optimize a Flare Gas Recovery Unit [annual savings of $3,000,000 in propylene and hexane costs]. Other experiences include: statistical process control [SPC] and process simulation [Pro II and Aspen software].

REPRESENTATIVE ACCOMPLISHMENTS

•    Designed a system to debottleneck and optimize a flare gas recovery Unit [estimated annual savings of $3,000,000 in propylene and hexane costs]. Managed project construction, commissioning and start-up of the system.

•    Designed, sized equipment [reciprocating compressor] and instrumentation and managed project construction, commissioning and start-up of a propylene recycle system [annual savings of $1,200,000 in propylene make-up cost].

•    Initiated program that reduced absorbent consumption by 17% [annual savings of $300,000].

•    Optimized three distillation columns and decreased steam consumption by 30% [annual savings of $160,000].

•    Designed and sized equipment [surge tank] and instrumentation of a nitrogen storage system [annual savings of $72,000 in nitrogen cost].

•    Designed and sized equipment and instrumentation of a soft water/fines recovery system [annual savings of $12,000 in soft water cost].

•    Designed reactor configuration to debottleneck process and increase production capacity by 30%.

•    Investigated with different catalyst injection modes and reduced catalyst consumption by 15%.

•    Developed formulation for a new product resulting in the corporation acquiring 100% market share from competition.

EXPERIENCES

Aristech Chemical Corporation 1995 - 2001
La Porte, Texas

Senior Project Engineer/Coordinator 1997 – 2001

Responsibilities Include:
•    Supervising The La Porte Plant Project Group, which is made up of: Engineers and Ten Craftsmen (Electricians, Pipefitters, Welders and Millwrights). Acting Plant Services and Maintenance Manager in the absence of the Manager.

•    Prepare both minor and capital projects design packages to request appropriation approval from Senior Management. A standard project design package includes:
Engineering Study Results if any.
Process Flow Diagrams (PFD’S).
Piping and Instrumentation Drawings (P&ID’S).
Bid packages describing scope and nature of work including cost estimates for major equipment and man-hour labor within 10% accuracy.
Economic justifications of the project.
Detail Project Schedule.

•    Coordinate efforts within Internal groups (Production, Engineering and Craftsmen) and External groups (Vendors and Outside Contractors) during project Construction, Commissioning and Start-up Phases.

•    Coordinate efforts within the Internal groups (Production, Engineering, Craftsmen, Safety and Environmental) to conduct Pre Start-up Safety Reviews (PSSR) before Commissioning and Start-up of any new System.

•    Manage both Minor and Capital Appropriation funds within approved Budget.

Senior Process Engineer 1995 – 1997
Responsibilities Include:

•    Provide Technical Support to the Production group which includes:
Troubleshooting equipment/Unit to resolve production problems.
Optimize and debottleneck process to improve the process, reduce production cost and increase production capacity.
Conduct Statistical Process Control (SPC) to improve product quality.

•    Process Design
Develop Process Flow Diagrams (PFD’S).
Develop Piping and Instrumentation Drawings (P&ID’S).
Sizing of equipment, Piping and Instrumentation (Pumps, Compressors, Tanks, Control Valves, Relief Valves, Flow Meters etc.).

•    Leader in HAZOP teams conducting Process Hazard Reviews (HAZOPS).

•    Internal Lead Auditor, Auditing other departments/groups to conform to ISO 9000 Standards.

•    Mentoring Junior Process Engineers.

Occidental Chemical Corporation 1990 – 1995
Victoria, Texas and Salisbury, Maryland

Production/Process Engineer
Responsibilities Include:

•    Providing day-to-day technical support to the production group (Process and Board Operators).

•    Manage all raw material inventories.

•    Develop Product formulation (recipe sheets) before product transitions to minimize production of off-specification product during transitions.

•    Conduct Engineering Studies and Optimize Unit to reduce production cost and improve product quality.

•    Modify and Improve Plant reactor model to better predict product physical properties.

•    Prepare Production manuals, work procedures and work instructions to train Process and Board Operators.

EDUCATION

Bachelor of science Chemical Engineering, December1989
Prairie View A & M University, Prairie View, Texas

COMPUTING EXPERIENCE

Advance user of PC/Engineering software: word processing, spreadsheets, Engineers aid, AutoCAD, Pro/II, Aspen, etc.

SPECIAL SKILLS AND VOLUNTEER WORK

•    Fluent in English and can speak, read and write some French.
•    Designed a system to debottleneck a portable water supply system for St. Joseph’s Secondary School, Sasse-Buea, Cameroon, Africa [ Project sponsored by SOBA-USA]

PROFESSIONAL AFFILIATIONS

•    South Texas section and National member of American Institute of Chemical Engineers.
President, Cameroon Society of Engineers – United States Chapter

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4151 to 4200 of 9787)

Go to Search Parameters...

Brief Description

Maintainece ,Operations, Project control& Management, Field Engineering

ORGANIZATION: Halliburton Technology Centre(I).Ltd, PUNEDuration: March 11th 2008 to till dateDesignation: Instrumentation Engineer/ Technician Job Profile: I am responsible for installation, Testing, commsing, trouble shouting, preventive maintenance of all fann make instruments.ORGANIZATION: Shavo

Graduated from Federal university of technology, Owerri Nigeria with a Second class lower honors and currently pursuing a Master's degree in chemical engineering at the University of Lagos and a certification in Microsoft Systems Engineering/Admin at NIIT Nigeria

Used simulation packages as HYSYS, UNISIM, DYNSIM, Shadow Plant. - B.Tech Chemical Engineer

Syrian civil contractor vartanian oil field services

Dowell schlumberger as Equipment Operator

Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction.

Civil and Syructural engineer

SAP Plant Maintenance, Supply Chain Management, Canada

Petroleum Engineer with 11 years working in Subsurface Services with solid knowledge and field experience in Water Control Technologies, Squeeze Cement with Coiled Tubing, Coiled Tubing, Snubbing , Wire Line, Logging, Well Abandons and Stimulation Jobs. Bilingual Level English - Spanish.

Chemistry, Physics and Calculus Educator/trainer. Native Spanish speaker.

Oil & Gas operation technician (Gauger) in OM&S (Oil Moments and Storage).

SUMMARY Professional Manager with real life experience in business management and successful sales specific to Russian and East European business marketplaces. Experience in working with remote corporate resources. Highly-motivated, energetic team player available for extensive travel.

Challenging position in the Engineering field, in an organization, where I can Contribute my strong analytical and troubleshooting skills and experience in Machinist, Designing and CNC Programming along with the outstanding Interpersonal skills and grow professionally.

I have 12 years of experience in oil and gas field operations. I've handled various responsibilities from exploration stage of field to upgradation of production to 65000 BOPD. Attached below is resume.

Over the past 14 years in the oil industry i have worked from ground up on drilling rigs. roustabout , floorhand ,motorman , derrickhand , driller , and my past employment for the past 4 years has been operations superintendent with duties pertaining to drilling ,workover and production.

Industrial Engineer, specialization in Environmental Engineering. 12 years experience in the Environmental area and oil and gas sector, as an advisor and as HSE Manager. Large experience formulating CEMPS, EIA, Audit programs, etc., and managing HSE budgets.

CHEMICAL ENGINEER with twelve years experience in production/process/project engineering. Looking for Project Management/Senior Project Engineering position either in the USA or Overseas [Preferably Africa].

Fundamental and technical security analysis, fixed income, financial statement analysis, accounting, budgeting, portfolio construction and asset allocation, econometric analysis, financial and statistical data modeling and forecasting, risk management, project management.

Above 12 years experience in the process Industry. Conversant with software packages like windows, Hextran, PI, Lims, Simulator and BAAN. Worked in various capacities in the operation of Petrochemical operation. Loading, Sulfiding and technical support to refinery unit operations

SUMMARY: Strong foundation in oil and gas, mining and environmental geology, in industry and national laboratory setting.

Basin modelling, organic petrography, sequence stratigraphy, x-ray diffraction, 2D seismic

Looking to contribute to the success of a company with my experience, hardwork and dedication to work as a team and make a difference preferably working on Petroleum, Gas or Cargo ships or Oil Rigs

I can work in supply boats, service ship and bunker ship

Around 12 years in the field of Instrumentation and Control System in Olefins Gas Cracker, Petrochemical and Copper Smelter & Refinery Sectors.

"Seeking Professional and Challenging career in Oil/ Gas/ Refinery/ Petrochemical sector. Offer extensive Field experiences in Maintenance/ Shutdown/ Commissioning/ and Construction of Plant and Rotary / Static Equipment”

Entry level Engineer with a Masters in Petroleum engineering and a Bachelors of science degree (cum laude) in Chemical engineering

I am an electronic ingeneer

Instrumentation maintenance

PLC, DCS ABB 800xA, Field Instrumentation

The posting also mentioned candidates with experience testing and reworking oil and gas wells. About 50% of my time over the past three years has been dedicated to this specific kind of work. I want to work hard and being a respectful engineer in the world.

Worked as a LAB TECHNICIAN for 4 years in oil & gas ind.

Ananlysis and design of steel structures, shelters and racks using STAAD. Design of soil supported and pile supported foundations using Foundation 3D, Mat 3D and MS-Excel

8 yrs.exp in the commissioning and operation of gasturbines, boilers & all other utilities in a big power plant and fertlisers company

HR Generalist with 14 years of experience

14 years of experience in managing all phases of Operations, including purchasing, inventory control, transportation, budget preparation and execution, staff development and regulatory compliance. Experience held in manufacturing, Oil/Gas, transportation and chemical industries.

M.Sc. Chemistry with two year experience in analytical laboratory. Handling the Sophisticated Instruments GC-MS, GC, HPLC, UV-VIS Spectrophotometer, Particle size analyzer, CHNS Analyser etc in research laboratory.

Piping Designer - pdms,pds,autocad,microstation,standard,support,general arrangement,site inspection,mto,cad,p&id,iso,basic stress, mechanical and 4-5years experinced

Safety engineer with 2+years of experience looking for a job

I speak fluently Arabic, French, English, and I have a confidence that my academic experience, with a good foundation from my graduate degree, the additional research skills and field work experience acquired during the different trainings I undertook, would make me an ideal candidate for a posi

Piping lead engineer & Piping stress analyst Piping design & modeling using PDMS, AUTO CAD and Piping stress analysis using ROHR II, CAESAR of Static, Dynamic, Structural Analysis and Auxiliary Analysis like API 610, NEMA SM23 and WRC 297.Piping Package: PDMS,ROHR II, CAESAR, AUTOCAD

Project management, good computer skill, good at communication.

Jr. Piping engineer with 2 years experience in Equipment layouts, Piping General Arrangement drawings and Piping isometrics, Piping specifications.

A highly motivated, result oriented Industrial Engineer and Quality Management educated to BSc Industrial Engineering.

I am from Ma Foi Management Consultants. I am working as a Global Placement consultant in Energy & Infrastructure vertical in Staffing solutions group of Ma Foi for past 1 year. Prior to Ma Foi I have been in merchant Navy sailing for Maersk Shipping for 2 years.

I'm currently on active duty united states navy, will be available for work 1st Mar, 2008

ASPEN HYSIS, TGNET ,TLNET

Working as a Sales engineer in a well established LLC. It’s a 20 years old company which deals with Instrumentation, Automation, Compressors, Air Operated Pumps, Valve Automation, Pneumatic Tools, Transmission Products and Material handling.

Electrical o&m enggineer for telcom indrusty

HSE Personnel .Diploma in Mechanical Engineering ,Diplomai n Industrial safety engineering ,doing Bachlor of science in Mechanical .5.6 years of experience in Oil and gas field

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 [ 84 ] 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out