Resume - Twenty Three (23) + years hands on Industrial, Commercial and Utility Electrical...

Misco Jobs

Resume #2303

CONTACT INFORMATION:
View contact information...

Objective
I am seeking a career opportunity, which will utilize my education, training, supervisory experience and knowledge in the field of Industrial I/E construction and electrical utility power and controls.

Education

1960 to 1964 Freer High School - Freer, TX. - Graduated
1966 to 1969 Capital Radio Engineering Institute, Washington DC - Associates Degree in
Industrial Electronics. (Three-Year Course)
1996 to 1997 National Center for Construction Education and Research - Graduated
Gainesville Florida: Electrical Basic and Advanced Instructors Course

Technical Qualifications:
* High Potential Testing of Medium and High Voltage cabling * Ground Resistance Testing
* Turnaround / Outage coordination and inspection
* Project Management * Superintendent * Project planning and Scheduling
* Megger Testing of low voltage cables motors etc. * Infrared Testing
* Protective Relay testing and setting * Instructor of startup and safe work procedures.
* Pre/ Post-installation testing of switchgear equipment. * Switchgear and Circuit sizing.
* Site preparation/layout inspection. * Construction Estimates and Material Procurement.
* Preventive Maintenance Program Development.* Field Engineering

Advanced and OJT Training
* Basler Controls: Voltage Regulation Seminar * Woodward Controls: Automatic Synchronizing School
* Square D: Variable speed controllers training * Training for the proper use of High Potential test equipment
* Stewart And Stevenson Inc.: Generator and Controls Start up School
* Cutler-Hammer: Low, Medium and High voltage switchgear training for installation and maintenance.
* Training for low, medium and high voltage power line construction and supervision provided by Central
Power and Lighting Co.
* Additional training for medium and high voltage substations in design, construction, Inspection and testing provided by Colwell & Associates Consulting Engineers Inc.
Summary of skills
Certified Electrical Instructor Through (NEC),basic electrical theory, procedures and advanced electrical theory.
Twenty Three (23) + years hands on Industrial, Commercial and Utility Electrical Field experience including installation and maintenance of low, medium and high voltage switchgear, distribution and transmission lines, substation, inspection and coordination, supervise and perform electrical construction, troubleshooting and maintenance/repair.
Excellent Safety record, skilled in training of technical Apprentices and team concept activities.
Skilled in writing programs and procedures for maintenance and operations procedures.
Computer skills include but not limited to windows, Microsoft Project, Word Perfect, Excel and Primavira P-3 for planning and scheduling.
Work History:
2000-Present Senior Engineering Technician - Colwell & Associates Inc., Corpus Christi, TX.
Consulting Engineers
City of Corpus Christi, Texas. (Contract Assignment on going, presently on call)
Supervised and perform major maintenance and repair for all 4160-vac switchgear for water treatment and wastewater plants including distribution and transmission lines, substation, electrical construction, troubleshooting.
Eaton/Cutler-Hammer, Maryland. (Contract Assignment)
Inspected all medium and high voltage installations engineered by Colwell and Associates, including switchgear (ranging from 480 vac to 69 kV) and primary pole line construction. Coordinated the dismantling of a high voltage breaker testing facility. Documented wiring and supervised crating and shipping of the facility to new plant in Mexico.
Coastal Refining, Texas. (Contract Assignment)
Created the standard program of electrical preventive maintenance for Coastal (now Valero) Refining Company. PM program included scheduling for general maintenance inspections, as well as, major maintenance on the following equipment: switchgear (480-vac to 12.47kV), breakers and switches 480vac to 69kV, cables and splices, oil-filled transformers (480-vac to 69kV), bus duct, hi-potential testing, overhead feeders equipment and hardware, capacitor banks, infrared testing for hot spots, 69kV incoming power connections and oil-filled 12.47kV distribution switches.
Coastal Refining West Plant, Texas. (Contract Assignment)
Supervised and inspected the re-conductoring of a 12.47kV feeder from the Coastal 69kV substation #2 to a smaller substation at the El Paso Natural Gas – Origin Station Pump Station. Procured equipment and materials for the job. Coordinated safety procedures for contractor and Coastal's electrical personnel on a daily basis. Surveyed, developed plans and generated a construction estimate for replacing all 12.47kV oil switches with newer and more dependable vacuum switches. Created implementation plan to minimize downtime during changeover.

1998 – 2000 Electrical Instructor - Citgo Refining, Corpus Christi, Texas.
(Contract Assignment through Rabalais Electric Company)
Designed curriculum and conducted electrical training courses for plant operations personnel. Lectures included electrical theory, materials and equipment, measurement techniques, maintenance of equipment, grounding and blueprint reading, substation and power distribution controls. Hands-on training included routine maintenance procedures, splicing/terminating cables and safe work procedures. Written and practical examinations were administrated to each student prior to course completion.
1997 – 1998 Instrumentation and Electrical Superintendent, - Bay Ltd. (a Berry Co), Corpus Christi, Texas.
(Contract Assignment)
Supervised the electrical and instrumentation construction of an iron carbide processing plant built in the Corpus Christi area. Installed all switchgear for 4160 vac motors as well as 12.47kV motors. Assisted in startup and testing of medium voltage switchgear. Supervised all electrical inspection as well as instrumentation. Peak I/E staffing was over 100 craftsmen and apprentices on site.
1994 –1996 Sr. Electrical Designer/Inspector - Colwell & Associates, Inc., Corpus Christi, TX.
(Contract Assignment) Consulting Engineers
Provided electrical designs for medium and low voltage substation and electrical distribution projects. Performed field investigation work to determine as-built conditions and obtain relevant design information. Developed one-line diagrams and layouts for existing and proposed facilities. Performed electrical calculations for switchgear and circuit sizing. Selected and specified materials and equipment. Projects included 12.47kV distribution substations and 4.16kV motor control centers. Followed job from start to finish and performed all inspection of electrical contractors work and progress.
1992-1994 Senior Electrical Designer/Inspector - Indtech, Corpus Christi, Texas. (Contract Assignment)
Transamerica Refining Co. New Sarpy, Louisiana. (Contract Assignment)
Created installation drawings, one-line diagrams, wiring diagrams, motor control schematics. Assisted construction and trained operators. Generated material requisitions. Evacuation alarm system for the West Plant, power distribution to pumps, fin fans, compressors, motors, etc. in the West Plant. MOV's power and controls in the West Plant and flare monitoring system in the East Plant. Supervised all installations of switchgear including motor control centers ranging from 480 vac. to 4160 vac. Assisted in testing equipment and setting protective relays to proper values.
Koch Refining Co. Corpus Christi, Texas. (Contract Assignment)
Provided drawings: one-line diagrams, wiring diagrams, motor control schematics. Assisted construction, material requisitions and construction bid packages. Flare reduction control and shutdown system for the entire plant. Power distribution to pumps, fin fans, compressors motors, etc. Inspected all Electrical construction efforts to insure all Company standards as well as NEC rules and regulations were followed.

1990-1992 Sr. Electrical Designer/Inspector - S & B Engineering & Construction, Houston, TX
(Contract Assignment)
Provided installation drawings with plans and assembly details, one line diagrams, wiring diagrams, motor control schematics, assistance to construction, material requisitions and construction bid packages. Also assisted with high voltage equipment installations and testing. Inspect high voltage installations as required.

1980-1990 General Superintendent/ Electrical General Foreman - Industrial Electric Corp. of Texas

1983-1990 General Superintendent Responsible for all construction efforts in the oil field with a staff of direct reports (up to three) General Foremen. The company was involved in oilfield construction, which included building primary (7.2kV-12.47kV) and secondary (480 Volts) pole line construction to support oilfield production including pump stations. The company also built the transformer banks and 480V distribution to the individual wells and or pumps stations as needed to produce the oil field. The company also provided electrical construction efforts for small skid mounted gas plants, which were located all across the State of Texas, Louisiana, New Mexico and Oklahoma. Built up to six (6) (12.47kV) substations, distribution lines and the individual transformer banks. Supervised from 30 to 60 men working in various areas. The smaller jobs may require 6 men and larger jobs would require up to 20 depending on the job requirements.

1980-1983 Electrical General Foreman Responsible for 3 crews (Normal manpower per crew was 2 journeymen and 2 helpers or total of 12 employees) Working electrification projects in the oilfield which included all underground installations and overhead installations to provide 480 voltage distribution to the oil pump jacks, including control boxes switches etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1680)

Go to Search Parameters...

Brief Description

BE IN METALLURGY WITH 12YRS. EXPERIENCE IN BLAST FURNACE OPERATIONS

I have experience as a Planning Engineer over a period of 14 years in all civil and electromechanical projects with international contractors. I have a degree in Civil Engineering and a postgraduate diploma in Construction Management. I am currently looking for new challenges.

project manager,bridge engineer,cost/quantity engineer,resident engineer

Construction Supervisor Finishing Works, "Pharma" Food Industry and High-Tech

An experienced and talented Project Management professional with extensive knowledge in luxury family home, multi-family homes, home sales and customer service.

B.Tech Mechanical Working as deputy Project Director looking after Contract Management

Safety Manager

Mechanical, Electrical and Civil

MBA and graduate Electrical Engineer with over 19 years experience in Project Management of Oil & Gas / Steel / Mega power projects

Construction project manager, experienced with combined cycle power station construction and upgrades. Interested in assignment in China / Pacific Rim / Southeast Asia.

Electrical Project Management. Extensive Offshore Marine Maintenance Experience. Mechanical and Electrical Education and Experience in the Oilfield. Speak English 1st and Spanish as a 2nd.

I am a hands on bilingual Field administrator. I will get your people to the exploration site and keep secure and train them to be safe. They will learn how to blend in and just do the job they have been hired to perform, and return them back to the U.S. with a minimum amount of fuss.

I have 20 years experience in the building and management business from owning and starting my own company, and project management experience with multi-million dollar home building projects.

Fifteen years of experience in construction management, worked in both public & private sectors. Eight years of which I worked for Turner Company that is a pioneer company in construction management, whereas the balance were in Projacs that is an exceptional company in construction management.

Current position: Senior QA/QC Engineer and Senior Project Engineer ( Civil Infrastructures ), Through knowledge of Qatar Petroleum (QP) standards , policies and procedures.Over 19 years of experience with reputable consulting and contracting firms in Qatar, Dubai, and Jordan

An entrepreneurial professional with eight years management experience in construction, brings to the position an excellent mix of skills in finance, purchasing, and project coordination.

Transformer Design Manager CAD Automation

Plumbing, Construction & Maintenance

MANAGING A READY MIX CONCRETE

Chartered Builder (MCIOB) Graduate Diploma in Building Management Clients Project Manager / Property Development Manager

Manager of proposals and technical support to marketing experience 5 years. Experience in Latin America and Middle East. Previous Project manager experience 15 years: wastewater treatment plants, power plants, solid waste facilities. Excellent technical writing, computer literacy.

Management experience in Russia

14 years of Project Management Skill

Versed in accounts.

A keen HSE professional with NEBOSH (U.K) International General Certificate & IOSH-Managing Safely course with Mechanical Engineering background. The experience profile ranges from: Ensuring internationally accepted Best HSE practices across Process Plants, Construction Industry, Oil & Gas EPC Proje

Construction Management of Roadways, Bridges and Buildings. Roadway Design.

Two Degrees from USA Currently Working as Project Manager in Saudi Arabia

CONSTRUCTION MANAGEMENT Managed major construction projects for established General Contractor. Projects include site development, water and sewer utility work, road, paving, concrete, and wastewater plants for Municipalities, Penndot, Commercial, Industrial, and Institutional owners.

I am proficient in the preparation of contractual documents, RFP's, RFI's, bid analysis, bid negotiations, subcontractor selection, buyouts, conceptual budgets, construction estimates, value engineering, constructability and code compliance reviews.

I am a Canadian citizen having 17 years solid building construction, Civil and structural design, quality Management, project management, construction Management. a dedicated team player/leader exhibiting a high level of energy and initiative under pressure.

Extensive background in Program/Project Management.

Experienced Leader and Project Manager

Heavy Equipment Operator -- Management.

Over twenty years in the engineering and construction industry, having been assigned supervision and management positions on various worldwide projects. In addition to strong technical skills across multiple disciplines, I strive to develop cohesive teams by fostering and maintaining good rapport w

Cost Engineer/Estimator with supervisory experience. Responsible for budgeting, estimating, budget coordination and total cost management. Identified systems and procedure that are necessary to ensure that the engineering, procurement, construction and start-up phases are properly planned.

Civil Engineer / MBA with 14 years of international construction project management experience.

Dear Sir / Madam, I’m interested a job opportunity with your organization which would require my skills & qualifications. I have 24 years experience Oil/gas & Power Industry, Construction Management/Supervision & QA/QC, Domestic & Overseas.

I am 37 Y rold, have 17yrsp.,after pass Dip. in Mech.engg., and 9yrs exp., after pass Dip. in Industrial safety from reputed institute in India, in Intl. standard Companies like CCIC-Qatar& Kuwait, L&T ECC-India, UB Engg ltd-India& Kuwait, Enelpower s.p.a.-Qatar.My Exp.

Over 6 (six) years experience covering all major systems construction project management experience. Experienced in all kind of system and procedure in building construction work. Project control start from mobilization till completion, involved in procument, detailed design, planning, construction

Many years in Construction Administration and project management with responsibility for Pre-Design to Post construction, putting together all consultants, Architect/MEP and design teams, Manage all project elements and interior design scope, environmental permitting, all portions of the contract.

Seeking a Challenging Position in the area of IT Support with an on going Opportunity for Professional Growth of CHIYODA CORPORATION in Japan.

Site/civil superintendent

Engineering / Construction Management

Looking for job in equipment maintenance and repair

Twenty Three (23) + years hands on Industrial, Commercial and Utility Electrical Field experience including installation and maintenance of low, medium and high voltage switchgear.

I have many years experience in Oil & Gas, Power, Chemical, US Embassy, Residential/Commercial and Government work. I have strong Communication, People Skills, Administration and Document Skills.

Refinery, tank farms, pipelines, gas plants, flow stations and production units. Engineering, procurement, construction and testing/commissioning.

Self-motivated, results-oriented professional with extensive international experience with multinational firms and government-owned facilities in the construction, shutdown, and refurbishing of oil, gas, petrochemical, and power facilities and plants.

INDIAN LEGAL PROFESSIONAL (ADVOCATE) WITH 20 YEARS ADMIN/HR EXPERIENCE IN INDIAN AIR FORCE

30+ years petro=chemical/construction QA/QC experience

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out