Resume - I have extensive experience in a wide range of Instrumentation and control syste...

Misco Jobs

Resume #34247

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS:
HND Measurement & Control Engineering
Falkirk College, Falkirk, Scotland.
ONC Instrumentation & Control
Falkirk College, Falkirk, Scotland.

Courses Attended: HUET AP/LAP(NOGEPA)Offshore safety introduction, ILO, Full Offshore Medical, VCA for Managers, Permit Receivers (various), Chemical Process Safety, Hazardous Areas & Equipment, D.C.S Shutdown (various), Digital Electronics & Logic, D.C.S Honeywell 3000 (Operation).
Honey well Plantscape configuration/Operation course.
Crosby Safety Relief Valve Overhaul Course. ABB ADVANT PLC System configuration. Safety passport course.
Various safety induction courses around the world.

Computer Experience Extensive use and customising of Instrument database index in MS Access.
Also some experience on Project Planning tools (MS Project).

SYNOPSIS
Experience
I have extensive experience in a wide range of Instrumentation and control systems; covering a range of job functions in various industries i.e. process, chemical and petro-chemical, on-shore oil & gas, pharmaceutical. Involvement in all areas of instrumentation engineering: electrical interfaces and control, design, installation supervision and commissioning. DCS and PLC system design review, Erection and commissioning experience. I have extensive experience using Intrinsically Safe and other Hazardous Area (ExD, ExN etc) design principals and am familiar with engineering solutions using networked instrumentation i.e. FIELDBUS. Extensive use and customising of Instrument database index in MS ACCESS, Exel.
Positions Held
SR I & C Commissioning Engineer, Instrument and Control Engineering Manager.
Construction Manager, Control Systems Engineer, Construction Engineer, Maintenance Engineer, Instrument Supervisor, Lead Technician, Commissioning Technician/Supervisor, Instrument Technician, DCS Engineer.
Plants/Instrumentation
DCS, PLC, ESD, fire & gas systems, petro-chemical, oil & gas, Power Stations, turbine, water treatment, Desalination, sewage treatment, Hydrogen plant, Demi & potable water, photo synthesis, boiler water, storage, analytical, flow, level, pressure, temperature, quantity, hydraulic, pneumatic.
Honeywell, Emerson, Yokogawa Centum CS3000, W.D.P.F.Foxboro, Rosemount, Masoneilan, Vega, Buhler, Tayllor, Eckardt, Gulde, Siemens, Fisher-Porter, Endress-Hauser, Samson, Bopp-Reuiter, Wika, Hereus, Lucifer, Rueger, Raychem, Polymetron, Zellweger Analytics, Maihak, Sigrist, Allen-Bradley, Gensym Advanced Control System, Honeywell TDC 2000/3000, Emerson, ABB Advant, ABB Symphony DCS & PLC, Plantscape.

Employment History:

Duration: September 2005 – present
Company: Cegelec
Project: GASGO ASAB/BAB Plants turbine Controls Upgrade (Abu Dhabi)
Position: Turbine Control Engineer
Duties:
In charge of complete package of turbine control system up grade
Design review for CCC Turbine Control for both sites.
Pre and post FAT meetings with CCC over their control system.
Oversee the integration of the turbine control system with the Honeywell DCS.
FAT/ SAT and IFAT tests.
Site surveys for possible hold points.
Prepare and check the basis of design, material, instrumentation and equipment specification and data sheets.
Technically evaluate offers and proposals.
Liaise with planning to ensure that engineering, procurement and implementation programmes are properly co-ordinated.

Duration: May 2005 – September 2005
Company: AJS (AMEC) (Capital Projects Group)
Project: K17 FA Brownfield development Project Shell/NAM Platform
Position: Lead Pre Commissioning Engineer
Duties:
In charge of pre - commissioning for the K17 FA field development Project which includes modification of two offshore oil rigs.
Convert approved design packages into SAP networks/work orders, and work packs.
Ensure availability of all necessary manpower resources
Call-off vendors as and when required for construction/commissioning support
Accept all commissioning activities as complete from the various vendors.
Participate in the preparation of technical features of Field Change Requests and Change Orders.
Solutions implementation and support of the project team objectives. Provide technical direction on a project basis
Conduct daily/weekly progress meeting with client/vendor.
Support and assist the construction team leader, delivery engineers and construction engineers in their responsibilities/duties

Duration: Dec 2004-May 2005
Company: (Enelpower Italy),
Project: yanbu unit 4 project. (Saudi Arabia)
Position: Consortium Commissioning Manager
Duties:
In charge of commissioning for the yambu project which includes one 130MW Ansaldo turbine and boiler with aux plant.
Solutions implementation and support of the project team objectives. Provide technical direction on a project basis
Conduct daily/weekly progress meeting with client and end user reporting back to head office in Italy.
Drive construction for the final completion and acceptance.
Monitor contractor inspection program and quality control program, review contractors drawings and O&M manual review and monitor as-built.
Drive the commissioning team for first sync of the unit to the grid.
Preparing commissioning plans including worksite assistance.
Organise and chair "adhoc" engineering meetings with discipline engineers to resolve specific areas of concern.
Advise Project Manager on all engineering matters, highlighting any potential problem areas. Liaise with Project Manager to ensure adequate resource of the required quality is available to meet project requirements.

Duration: March 2004-DEC 2004
Company: (Enelpower Italy), Qatar (Wide technical Services).
Project: Ras Laffan power plant
Position: SR DCS / I & C Commissioning Engineer
Assigned as SR DCS / I & C Commissioning Engineer on the Ras Laffan Combined Cycle and desalination facility.
Duties: Schedule daily commissioning plan to co-ordinate with project completion dates.
Clear all Non Conformances and punch lists, Carry out witness tests with the client and consultants.
Conducting Hardware & Software tests for DCS and Subsystems.
Fault finding and Troubleshooting DCS Hardware/Software.
Interface with suppliers of DCS, operator stations and software.
Technical assistance for any contractual problems that arise.
Completion of Emerson Ovation DCS commissioning SAT and SIT, working towards final PAC for the plant.
Assures the efficiency, adequacy and conformance to overall objectives of all phases of complex engineering problems
Assist on the commissioning of the various vendor systems, SCADA, GE, and ABB.

Duration: Jan 2003-Feb 2004
Company: Alstom Power Italia (U.A.E.) (Wide technical Services).
Project: Ruwais GUP Expansion
Position: SR I & C Commissioning Engineer
Assigned as SR I & C Commissioning Engineer on the Ruwais GUP Expansion.
Duties: Schedule daily commissioning plan to co-ordinate with project completion dates.
Clear all Non Conformances and punch lists, Carry out witness tests with the client and consultants.
Interface with suppliers of DCS, operator stations and software.
Technical assistance for any contractual problems that arise.
Co-Ordinate Meetings with Client and project management teams to resolve contractual problems.
Completion of ABB DCS commissioning SAT and SIT, working towards final PAC for the plant.
Completion of the Virtual Process Advanced Control System Performance and SIT/SAT test.
Schedule daily maintenance programs for I & C activities.
Trouble shooting of all I & C Systems, Bentley Nevada, Abb Advent, ABB Symphony DCS.

Duration: Aug 2002-Jan 2003
Company: Honeywell
Project: Wyieth Bio-Pharmaceutical plant.
Position: Commissioning Engineer
Assigned as Instrument Engineer on the Wyieth Bio-Pharmaceutical plant.
Duties: Co-ordinate team of instrumentation Technicians working in the field (loop checks to ABB PLC System, calibration of transmitters, logic functional checks).
Commissioning of the Honeywell H.V.A.C. Control system Plantscape. The equipment involved includes Boilers, Chillers, and supply, extract and pressurisation dampers, Air Handling Units, MCCs and Fire Alarm Interface.
Make up of system Turn over packages for client.

Duration: July 2002 – Aug 2002
Company: Macfarlin Smith
Project: Poppy Straw Project
Position: Commissioning Engineer
Assigned as Instrument Engineer on the Macfarlin Smith pharmaceutical plant.
Duties: Co-ordinate team of instrumentation Technicians working in the field (loop checks to Siemens PLC System, calibration of transmitters, logic functional checks).
Make up of system Turn over packages for client.

Duration: Nov 2001-July 2002
Company: Alstom Power Italia (Saudi Arabia). (Wide technical Services).
Project: Shoaiba 3000MW Plant Stage 1 Phase 1 & 2
Position: SR I & C Commissioning Engineer
Assigned as SR Instrument & Control Commissioning Engineer on the Shoaiba 3000MW Power Station Project Saudi Arabia.
Duties: Co-ordinate teams of instrumentation & control technicians working in the field (loop checks, calibration of transmitters, logic functional checks).
Assist construction in the completion and hand over of the erection works.
Schedule daily commissioning plan to co-ordinate with project completion dates.
Keep as per QA/QC standard the test equipment used during commissioning.
Clear all Non Conformances and punch lists
Carry out witness tests with the client and consultants.
Interface with suppliers of PLC's, operator stations and software.
Complete I & C turnover packages for client hand over.
Technical assistance for any contractual problems.

Duration: Sept 2001-Nov 2001
Company: Syngenta Agrochemical Plant, Grangemouth, Scotland
Project: Shutdown and Maintenance Program.
Position: Maintenance Engineer
Assigned as Maintenance Engineer to the Central Engineering Group covering Azoxystrobin (crop protection) plants.
Duties: Maintenance Engineer to the Central Engineering Group covering Azoxystrobin (crop protection) plants.
Stripdown / reinstatement of instrumentation and control valves during and after plant shutdown
Periods. Implementation of plant preventative maintenance system.

Duration: Jan.2001- Sept 2001
Company: SEPAM Ltd.
Project: Proposals Dept., Head Office, Ireland
Position: Instrument and Control Engineering Manager.
Assigned as Instrument and Control Engineering Manager for Sepam's bid Department.
Duties: Working in the proposals department for the preparation of Tender proposals, including Pharmaceutical and microelectronics' Projects in Ireland, Singapore, UK, China and mainland Europe. Responsible for all Review of Specifications, Material Take Off, Development of Bills of Materials and Pricing. Review Project Schedule and develop Project Execution Method for Instrument and Control Scope of work.

Duration: Aug.2000-Jan.2001
Company: Tyco Flow Control
Project: BP Oil
Position: Instrument Support Engineer.
Assigned as Tyco's Instrument Support Engineer for their control systems workshop.
Duties: Planning individual activities; identify spares/materials, subcontract or specialist requirements and resources required.
Identify opportunities for new job methods and improved efficiency.
Schedule jobs i.e. times to complete.
Write job method statements, task risk assessments.
Maintain overall schedule and communication to customer and service centre manager on progress and shortfalls.
Attend daily progress meetings, reporting on current situations, monitoring changes in forward planning and restrictions to progress.

Duration: April.2000-Aug.2000
Company: ABB
Project: Factory Acceptance Test (FAT) ABB Advant Houston, Texas.
Position: Control Systems Engineer.
Assigned as Control Systems Engineer for the Saudi Aramco Hawiyah Gas Plant Project.
Duties: Design special procedures for DCS and integrated systems, ABB August ESD System, Bentley Nevada Vibration System and CCC Compressor Control System.
Involved in Factory Acceptance Test for the ABB Advant DCS and the integration FAT of Vibration, ESD, and Compressor Control Systems.

Duration: Jan.2000-April.2000
Company: McConnell Dowell
Project: Aramco Control System Replacement Program
Position: Sr Instrument Engineer.
Assigned as Sr Instrument Engineer for McConnell Dowell on the Control System Replacement Project.
Duties, Review of construction loop packages for final handover to commissioning,
Drive construction & pre-commissioning to completion. Verifying vendor instrument Design criteria to suit plant scope & conditions. Address all contractors & construction initiated site quires.
Writing preventive maintenance Schedule for all Instrument work.

Duration: Aug.'99-Dec 99
Company: Fluor Daniel
Project: China Program (KODAK)
Position: Instrument Construction Engineer.
Assigned as Construction Engineer on the building & Commissioning of Kodak's new Photo sensitising building. Duties: Address all contractors & construction initiated RFI's. Lead the 80% & 95% complete punch list effort for each turnover package. Provide design and contractual interpretation as required to the contractor. Driving construction to mechanical completion within Kodak's parameters.
Assigned as Engineer for the installation and commissioning of all building and process air handling units and HAVC Control.
Worked on Instrument maintenance schedules from control valves to building services.

Duration: June.'99-Aug. 99'
Company: Fisher Rosemont
Project: Obaided Development, Egypt.
Position: QA/QC Supervisor
Assigned as QA/QC Supervisor for the Obaided Development Project.
Duties: Inspection of all instrumentation, H.V.A.C. System gas Alarms and ESD Systems. Material and equipment Inspection on Vendor packages and Final Co-ordination of all hand over documents.

Duration: Aug.'98-May.'99
Company: S A. Kent
Project: Construction Manager Gosp 3 & 4 (Saudi Arabia)
Position: Construction Manager
Assigned as Construction Manager for DCS upgrade of two Gas & Oil Separation Plants.
Duties: Management of all sites for the two gosp's.
Planning individual activities, identify spares/materials, subcontract or specialist requirements and resources required.
Collect and record data for use in performance measurement.
Duration: May.'98-Aug.'98
Company: Glaxo-Welcome
Project: Instrument maintenance Program
Position: Instrument maintenance Engineer.
Assigned as Instrument maintenance Engineer with Glaxo-Welcome.
Main Duties: Management of all sites Instrument maintenance for the plant.
Assign daily job packs for instrument and electrical technicians. Write monthly maintenance schedule for instrument works.

Duration: April.'98-Jul.'98
Company: James Scott
Project: De-Bottle neck & Turnaround.
Position: Instrument Engineer.
Assigned as Instrument Engineer for the commissioning of Exxon's Ethylene process plant.
Duties: Commissioning & final handover of all Instrument systems. Preparation of instrument loop packs.

Duration: Jan.'98-March.'98
Company: Balfour Kilpatrick
Project: New Pigment Process Plant.
Position: Instrument Engineer.
Assigned as Instrument Engineer for the Commissioning team on the Ciba pigment plant.
Duties: Loop tuning all instrument systems through the Allan Bradley PLC's, also installation and calibration of the pH Analysers. Responsible for all progress reports, dealing with client's problems.

Duration: April.'97-Dec.'97
Company: ESSO
Project: Balder F.P.U.
Position: Instrument Engineer
Duties: Review consisting of verification towards the instrument data sheets, certificates Asbuilt design drawings & test records in line with the requirements of N.P.D., NVE, IEC & NMD regulations and project specifications. Main function being certification of instruments in hazardous areas including IP & EX ratings. Preparation of work packs for mechanical completion & pre-commissioning.

Duration: 1982 – 1997.
Company: Insertech
Project: Various
Position: Maintenance/Instrument Technician/ SR Instrument Technician
Assigned on various contracts after my formal training oil and gas, Petro-chem, Power and Water plants.
Duties: loop tuning /checking, installation & commissioning of various instrument control systems.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1301 to 1350 of 1817)

Go to Search Parameters...

Brief Description

Key skill: Design and Implementation of quality management system Education: Degree in Mechanical Engineering (A.M.I.E) from “The Institution of Engineers”-India Certifications: ISO 9000:2000 Series QMS Lead Auditor - course conducted by B.V.Q.I.

MBA-HR and International business

I have extensive experience in a wide range of Instrumentation and control systems; covering a range of job functions in various industries i.e. process, chemical and petro-chemical, on-shore oil & gas, pharmaceutical. Involvement in all areas of instrumentation engineering: electrical interfaces an

Procurement Purchasing Logistics Inventory Control Contracts Negotiations

Security Executive with massive corporate and international exposure. Expert in Afrcan matters and have massive and extensive security network in Africa.

I am a South African currently living in Ghana. I am looking for opportunities in Finance. I have extensive experience from working in Nigeria and Ghana.

Principal Consultant, BSc (Hons). MSc. DIC. 8 Yrs experience in Contaminated Land assessment and Remediation.

Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation

disaster management; project management; consultant; liaison

Chemical Engineer with Environmental Engineering experience

Senior Mechanical Engineer, Bachelor Of Engineering

Cwi/QA/QC Manager

Talented HR professional with a generalist background. Experienced working in a professional services environment with complex hierarchies and matrix management. Ability to operate at both a strategic and operational level, within a geographically diverse team and in an international role.

Bachelor of Mechanical Engineer, TWI Certified CSWIP 3.2, AWS certified CWI, Level II in MT, PT, RT, UT and ISO 9000-2000 Certified Lead Auditor.

Operations Manager or Shift Supervisor in a Power Plant

I Mohammed Yaseen Kajee hereby wish to apply for employment through your company in the capacity of Client Projects Quality Manager, Senior Client Quality Assurance Engineer / Inspector and Client Safety Representative. I have had extensive experience in Quality Management Systems , Pressure Vesse

I have 28 years experience in maintenance, the experience gained in the instrumentation trade up to the management level. I have gained vast experience in technical faultfinding and technical and staff related problem solving, mostly in the shortest time due to process requirements.

Master in mechanical engineering (ENIT)

I have a Bachelor of Engineering Degree with Post Graduate Diploma in Construction Management, and with my wide ranging experience in the field of Engineering and Construction for a period of over 13 years,I am looking for a opportunity to excel myself in Planning and project Controls.

Proposals & Contracts, Commercials, Process & Technologies, Project Management

Project Management / Engineering Coordination / Process Engineering / Business Development

I am Commerce Graduate, Fellow member of ICSI (FCS) and Microsoft Certified Professional (MCP) with 13 years of work experience in Finance, Accounts, Company Affairs and Statutory Compliances.

Senior Instrumentation & Control and Telecom-SCADA Engineer

I am an experienced member of a Cost Management company based in Abu Dhabi with previous experience as a Quantity Surveyor in a variety of fields including construction, development and consultancy services. As an industry professional with a Diploma in National Building Science, extensive technical

HVAC, Facilities Maintenance

Instrumentation & Commissioning Analyzer Engineer

Innovative thinker with broad-based expertise in human resources, and business development.

Free! DYNAMIC PROFESSIONAL - MASTER OF SCIENCE - CONSTRUCTION SAFETY COORDINATOR - PROJECT MANAGER -ADVANCED FIRST AID, SAFETY, & RESCUE

In-charge of Quality Assurance Department of company. To look after all the quality procedures in the company and insure effective implementation of ISO 9001-2000 standard, ISO 14001 and OHSAS 18001. Export Sales and Budgeting Forecasting etc.

Hardworking, easy learner,..... Bachelor of engineering in instrumentation

To secure a position in Environmental Health and Safety (EHS) Compliance with an established organization utilizing my 20 years of EHS skills, knowledge and experience.

Financial Manager (expat)

20+ years of experience with the environmental aspects of major energy projects - power plants, pipelines, transmission lines, refineries.

Oracle Functional Consultant with over 10 years of experience in the Finance domain

Engineer with 15 years of experience in Supply Chain, Operation, Project & Construction management

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

Field Project Manager (Crosswell Seismic). Highly motivated, enthusiastic Borehole Seismic Project Manager with 11 years of wireline and seismic experience. Successfully managed numerous projects in diverse locations around the world.

I & E Inspector, Electrical GF, Lead Electrician - 20 + years experience in industrial and commercial

Team Player, Leadership Skills, Priority Setting, Multi-Task, Organizational Skill, Attention to Detail, 5S/ Six Sigma Certified

Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical

Senior Instrumentation Specialist / Designer

Inventory Management, Materials Planning, ERP, Heavy fabrication, Production planning, Project Management, M.S Project, Supply Chain, Manpower handling, ALPS, Erection, MS Office, Internet Researcher, MATLAB, C, C++ and AutoCAD

Materials Manager, Barge foreman, Assistant superintendent, General assistant

Project Planning, Scheduling and Forecasting, Progress measurement and reporting, Man-hour tracking and control, Project Control, Project and Maintenance Management/Planning/Scheduling. HND Computer Science, EMsc Project Management

35 + year mechanic

Diverse experience in the fields of failure analyses, corrosion of steels, protective coatings and paint film systems, welding and materials selection, complemented by a strong background in mechanical engineering. Excellent communication and organization skills, dedicated to quality and accuracy wi

15+ years experience as a highly motivated corporate and leisure travel consultant Able to communicate with people at all levels of responsibility. Experience with Inside Sales - successful cold calling and B2B sales and customer service Ability to successfully relate to and work with diverse peop

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

BS EE, Program/Project Management, Business Development, MS Project, Oracle Financial Analyzer, Data-Voice Value Added Service projects & business, GSM 900 infrastructure (Ericsson) deep knowledge, Wireless and Service Engineering Planning, MS Office, IP Networking

Logistics, Technology, Transport and Management Professional

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 [ 27 ] 28 29 30 31 32 33 34 35 36 37

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out