Resume - With more than ten (10) years of extensive experience and knowledge in Pipe stre...

Misco Jobs

Resume #40498

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
With more than ten (10) years of extensive experience and knowledge in Pipe stress calculation and support design of oil & gas, petrochemical, refinery, chemical, LNG, LPG, onshore, nuclear power plant and subsea piping projects. Has the ability to do pipe support design (standard or special) and detail pipe stress calculation and also able to lead a group of engineers. Familiar with ASME B31.3/B31.1/B31.4/API Codes. I am proficient in the use of AutoPIPE and CAESAR II software for stress calculation and also familiar with Design Review, Smart Plant Viewer, Reality Review, Microstation and Autocad. I have taking up MBA course to support my capabilities and enhance my knowledge through efficient and effective approach. Overseas experience spanning for over six years across Japan and Taiwan.

WORK EXPERIENCE:
1. Company: Stone & Webster Asia / Atomtech Engineering Corporation
Taipei County, Taiwan, ROC
Position: Pipe Support Engineer / Pipe Stress Engineer
Date: May 2005 – Present

Work Description:
As Piping Support Engineer / Stress Engineer:
a. Responsible for complete calculation of Stress Analysis for Nuclear Power Plant using NUPipe or Hand Calculation Method (Guided Cantilever Method).
b. Coordinates frequently with the design group for the workability of the piping systems based on the result of stress analysis.
c. Responsible for pipe support design (standard and special) needed for the project.
d. Responsible of sketch/input special pipe support drawing using Pelican Forge.
e. Preparation of loading data information for Civil and Structural group.
f. Responsible of consistency checking between stress isometric drawing and latest design isometric drawing or issued for construction (IFC) drawing.

Projects Handled: Assigned Place / Date a. Taiwan Nuclear Power Plant Company Lungmen Project Taipei, Taiwan/
Taipei, Taiwan May, 2005

2. COMPANY: CTCI Corporation
Taipei, Taiwan
Position: Piping Engineer / Pipe Stress Engineer
Date: November 2004 – April 2005

Work Description:
As Piping Engineer / Stress Engineer:
a. Responsible for complete calculation of Flexibility Analysis for refinery and petrochemical plant using CAESAR II software.
b. Coordinates frequently with the design group for the workability of the piping systems based on the result of flexibility analysis.
c. Responsible for pipe support design (standard and special) needed for the project.
d. Responsible of sketch/input special pipe support drawing.
e. Responsible of providing the pipe support clip information to the Equipment group.
f. Preparation of loading data information for Civil and Structural group.
g. Responsible of consistency checking between flexibility isometric drawing and latest design isometric drawing or issued for construction (IFC) drawing.

Projects Handled: Assigned Place / Date a. Qatar Petrochemical Co. Ltd (EP2 Project) Taipei, Taiwan
Mesaieed, Qatar March 2005
b. Formosa Chemicals Industries Ltd. Co. (IPA Project) Taipei, Taiwan/
Taipei, Taiwan Jan. 2005
c. Formosa Petrochemical Co. (HDS and RCC Project) Taipei, Taiwan/
Taipei, Taiwan Nov. 2004

3. COMPANY: Chiyoda and EEI Corporation
ADDRESS: C and E Corporation Bldg., Meralco Ave. cor. Araneta St., City of Pasig
POSITION: Piping Engineer / Pipe Stress Engineer
DATE: March 1995 – October 2004

Work Description:
As Piping Engineer:
a. Responsible for project scheduling, manning, and progress report/scheduling.
b. Prepare piping layout based on P&ID and Plot plan with accordance to piping codes and standards.
c. Responsible for piping design around pump, heat exchanger, tank, column, vertical/horizontal vessel and pipe rack.
d. Responsible of sketch/input of piping layout, structure and equipment to PDS.
e. Responsible of designing the pipe support and special pipe support needed.
f. Preparation of loading data information.
g. Responsible of consistency checking between flex isometric drawing and latest design isometric drawing or issued for construction (IFC) drawing.
h. Know how about equipment arrangement.
i. Checking and updating of PI&D against the latest design change.
a. Responsible of Document Control / Filing.

As Pipe Stress Engineer:
a. Responsible for complete calculation of Flexibility Analysis for refinery, petrochemical and geothermal cross-country pipeline using AutoPIPE or CAESAR II software.
- Material data listing
- Flexibility Isometric drawing / incl. all necessary data needed for calculation
- Nozzle Report (pump, air fin cooler, column, heat exchanger, compressor, etc.)
- Nozzle Softness
- Spring Information Report
- Batch Report b. Responsible for all engineering calculations and design needed for the project.
c. Responsible for project scheduling, manning, and progress report/scheduling.
d. Coordinates frequently with the design group for the workability of the piping systems based on the result of flexibility analysis.
e. Responsible of classifying lines to be and not to be calculated for flexibility analysis.
f. Responsible of supervising/checking works of stress engineers to make sure that their works are done according to Specification for Piping Flexibility Analysis of the project and they finished within the schedule of completion.
g. Responsible for checking the calculation (displacement, restraint and stress ratio) to satisfy the requirement of ASME Code.
h. Responsible for calculation of Hydraulic fixed water spray system using Hypercalc. software according to National Fire Protection Association 13 and 15.
i. Responsible of Document Control / Filing of all Flex Calculation.

Projects Handled: Assigned Place / Date a. Al Khaleeg Gas Pasig, Phils./
Al Khaleeg Gas, Qatar Feb 2004
b. Oman Liquefied Natural Gas Pasig, Phils./
Oman Liquefied Natural Gas Co. Ltd. Jan 2003
c. Ras Laffan Liquefied Natural Gas Pasig, Phils./
Ras Laffan, Qatar Jan 2002
d. Ras Laffan Liquefied Natural Gas Yokohama, Japan
Ras Laffan, Qatar June 2001
e. Thai Oil HDS Project Pasig, Phils./
Sriracha, Thailand June 2000
f. Condensate Splitter Unit Pasig, Phils.,/
Shell Eastern Petroleum Ltd. Oct. 1999

4. Company: Engineering Equipment Inc. (EEI) Corporation
Bagumbayan, Quezon City
Position: Piping Designer
Date: May, 1993 to February, 1995

Work Description:
a. Supervise/distribute works of piping draftsmen to make sure that work is done according to Design Engineering Practice (DEP) of the project.
b. Responsible in the preparation of complete material take-off and installation cost estimate (equip., labor crew staff loading, and other miscellaneous items needed to complete the estimate).
c. Prepares detail drawing necessary in the project such as piping plan elev., sections of isometric drawings and others, for the fabrication of new and modification of existing equipment using AutoCad.
d. Responsible for preparing pressure test plan such as a hydrotest and pneumatic test.
e. Coordinates frequently with shop fabrication and field operation group for proper implementation of the drawing and to make sure that the drawing is finished within the schedule of completion.
f. Coordinates directly with clients regarding changes in actual field survey against piping drawing such as northing and easting coordinates, pipeline elevation, pipe support location and the likes to avoid delay of the project.
g. Accountable in the preparation of tracer lines, hot oil trace line and steam trace line.
h. Conducts actual field survey to gather data and information for the preparation of working drawing needed for piping plan isometric drawing elevation, structural pipe supports location, equipment detail for refineries and petrochemical plant.
i. Checks isometric drawings through P & ID, piping plan, equipment details, and structural details.

Projects Handled:
a. Redundant Re-injection Line
PNOC - Palinpinon I Geothermal Plant
Palinpinon, Valencia Negros Oriental, Phils.
b. 10,000 BBRLS Capacity Asphalt Tank-67
Phil. Petroleum Corporation
Pililla, Rizal, Phils.
c. Shell Tabangao Asset Renewal Project (STAR)
Flour Daniel - Pilipinas Shell Petroleum Corporation
Tabangao, Batangas City, Phils.
d. Lube Oil Blending Plant
BHP - Pilipinas Shell Petroleum Corporation
Pandacan, Manila

5. Company: ADA Engineering Services
Libjo, Tiwi Albay
Position: Piping Draftsman
Date: May, 1992 to April, 1993

Work Description:
a. Prepares drawings necessary for the projects such as piping plan/elevation, isometric drawing, section views and detailing drawing using AutoCad.
b. Responsible in the preparation of complete material take-off and installation cost estimate.
c. Prepares pipeline route accessible for the allotted place for the project.
d. Conduct actual field survey to gather data and information for preparation of working drawings needed for piping plan, isometric drawing, pipe supports location in Geothermal plant.

Projects Handled:
a. Pumping Station of Re-injection System (Brine)
Phil. Geothermal Inc.
Libjo, Tiwi Albay, Phils.
b. Matalibong Cross Country Pipeline
Phil. Geothermal Inc.
Libjo, Tiwi Albay, Phils.

SPECIAL SKILLS: (with excellent know-how)
- AutoCAD (Ver.2006)
- Microstation
- Microsoft Office (Excel, Word, Powerpoint)
- Plant Design System (PDS)
- Design Review Version
- Smart Plant Reviewer (SPR)
- Microsoft Visual Basic
- Pelican Forge
- Plant Design Management System (PDMS)
- Reality Review

CALCULATION SOFTWARE: (with excellent know-how)
- AutoPIPE ver. 6.2 software
- Caesar II ver. 4.4
- Finite Element Calculation
- HyperCalc.
- Pipe Sizing
- Thickness Calculation
- Firewater Distribution Network System

TRAINING / SEMINARS ATTENDED:
a. Pelican Forge Training, July 2005, Taipei, Taiwan b. PDMS Training Update, April 2005, Taipei, Taiwan c. AOTS Stress Analysis, September 2004, Pasig City, Phils.
d. PDS Training Update, May 2003, Pasig City, Phils.
e. ISO 9000 Orientation, August 1999, Pasig City, Phils.
f. AutoCAD Update Training, July 1997, Autodesk, Pasig City, Phils.
g. Professionalism at Work, May 1996, Pasig City, Phils.
h. Piping Design and Engineering, 1995, Chiyoda Corporation Yokohama, Japan i. Total Quality Management, 1994, Quezon City, Phils.

EDUCATIONAL ATTAINMENT:
a. COURSE Bachelor of Science in Mechanical Engineering
Mapua Institute of Technology, March 1991
Manila, Philippines b. POST GRADUATE Master in Business Administration (MBA)
Ateneo Graduate School of Business, (2000~Undergrad.)
Makati, Philippines c. LICENSURE: Registered Mechanical Engineer, Passed March 1992
License No. 0045642-96
Civil Service Eligibility (Professional), 1991

LANGUAGE SPOKEN: Filipino and English

CHARACTER REFERENCES:
Professional and Personal references are available upon request.

I hereby certify that the above information is true and correct to the best of my knowledge and belief.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 1812)

Go to Search Parameters...

Brief Description

Provide technical expertise, guidance and leadership for a variety of designated engineering projects at site.

SENIOR PLANNING ENGINEER (OIL & GAS)

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

Senior level treasury generalist with 20 years of experience in the treasury department of three Fortune 500 companies. Successful track record of transitioning treasury departments following acquisitions.

Maintenance, water purification, reverse osmosis, materials, logistics, management

Worked experience of 4 yrs. in the field of EIA and EMP for various infrastructure and construction projects including world bank funded projects.

Well prepared civil engineer with a construction management background and good interpersonal relations, communication and problem solving skills

Captain looking for a challanging position shore based as Marine/HSE Superintendent- Manager. I am an unlimited Master Mariner and I have recently achieved a MSc in Marine Operations and Safety Management.

I am a Senior Process Engineer in oil & gas systems. Along my 18 years experience in the field, I have held a number of positions going form operation to project execution and management and process engineering activities. I am fluent in English, French and Arabic.

Mail – Executive \ Personal Secretary \Office Co-ordinator

Progressively Responsible of a range of Purchasing/Warehousing Management, Organization & Administration positions with worldwide procurement (national & international); Contribution and Direct Involvement in all previous jobs with regards to purchasing of spare parts and materials required for all

Logistics, Procurement and Materials Manager (Supply chain)

Experienced Design Engineer

A solid background in project controls, project coordination, project scheduling, and records management with over twelve years combined experience in these areas.

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

A project management and business development professional with extensive experience in bid management through to contractual completion. An impressive record in winning new business, and managing and completing projects on time and under budget.

Contracts & Global Procurement Manager, Change Agent, Systems Initiation, Strategic Sourcing, Seasoned Negotiator, Proven Organizational & Team Leadership, Collaborative Mgmt. Style, Broad knowledge of OEMs & Suppliers, Contractor Oversight, Systems & Procedures, Middle East Mega-Project Experience.

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

I am a mining engineer and also has a masters degree in urban and regional planning.

Buyer/Planner Skilled in Inventory Management, Cost Reduction, Sourcing and Negotiation

I desire a position as manager or associate manager to help grow and expand the company. My experiences so far include the former establishment of a home based import/export business with experiences in cultural behavior and product negotiations with foreign companies.

Channel sales, Institutional sales, Oem sales, Business development, International sales

He has more than 25 years of experience; from his current work in hydrogeological and hydrochemical assessment, environmental monitoring, and capacity building. He has managed many projects as well as acted as team leader on various project components.

Construction HSE Manager with 18 years of experience encompassing the areas of Safety Adviser through to Corporate HSE Manager. Formerly a Senior ranking Fire Officer (nine years experience). Five year apprenticeship served as a mech. engineer. Degreed engineer with both off-shore and on-shore exp.

I have experience in various phases of procurement, cost, and accounting within the construction management industry. I have been in procurement field as well as in project controls for more than four years with a successful project track record.

I'm a Site Engineer with 3+years of Exp as a Site Engineer, Roads at KMC Constructions Ltd. , India.

Software Developer .NET, Java SQL

Utilize management and organization skills acquired through previous positions in

I have an overall experience of 17 years out of which 11 years in Oil & Gas Development Projects. Presently I am working as Group Project Engineer in a Major British Exploration & Production Company in Edinburgh UK. Following are my current responsibilities:

Contracts Manager

Process Plant Manager, Metallurgical Management, Production Manager, Chief Sorter and Certified Flow-Sort X-Ray Machine operator.

• Extensive experience managing Document Control deparments within Engineering, Construction and Petrochemical Industries.

Project Controls / Project Services / Business Management

Project Management / Production Control

Site Construction Manager Oil and gas Industry. Over 20 years experience. Process plants, facilities and pipelines.

Project control engineer with experience in planning and cost engineerig fields.

A self-directed, high organized individual who is able to easily identify and achieve priorities. Significant broad based experience in the areas of facilities planning, production, engineering, maintenance, environmental, staffing, and safety. Excellent communication and technical report writing

I have done my MBA and Diploma in information technology. I have worked in diffrent feilds

Instrumentation, Construction Engineer, Commissioning Engineer, Shutdown, Turnaround, I/E Lead, Designer, Design Specialist, Field Engineer, EPC, AutoCAD

Marine Engineering, Risk Assessment, Lloyds Surveyor, Project Management FPSO Projects worldwide

Extensive and progressively responsible hands-on management experience.

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

Welding Engineer

BE,MBA graduage having 13+ years experience in Sales & Marketing of Engineering, Flow Control & Instrumentation Process Products

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

With more than ten (10) years of extensive experience and knowledge in Pipe stress calculation and support design of oil & gas, petrochemical, refinery, chemical, LNG, LPG, onshore, nuclear power plant and subsea piping projects.

Security Manager

Over 20 Years experience in International and Domestic assignments in the Electrical and Instrumentation Fields. Assignments internation-ally have been in Project/Construction management, Supervision, QA/QC and commissioning. Project experience is diverse and in-cludes mining and extraction/ recov

A qualified professional with 6 plus years of expertise, with sound technical and commercial practices with consulting experience in Change and Project Management in the areas of EHS management, Sustainability and Corporate Governance with due imp. to CSR, HR and Social Environment.

Licensed professional engineer with multi-million dollar construction projects experience. Fully trilingual - fluent in English, Spanish & French. Highly proficient with AutoCAD, GIS, SewerCAD, MS Project, Primavera and Microsoft Office.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out