Resume - 11 years of experience in the Oil & Gas, Carried out various endeavours includin...

Misco Jobs

Resume #43086

CONTACT INFORMATION:
View contact information...

EDUCATION:
- Project Management Professional certificate "PMP" from the Project Management Institute "PMI", 2005.
- Master of Science Degree in structural Engineering "MSc", followed by a published thesis with the title of "Dynamic Response of Fixed Offshore Structures" - Ain Shams University, Cairo, Egypt 2004.
- Bachelor of Science Degree in Civil & Structural Engineering "BSc", Ain Shams University, June 1995.

WORK HISTORY:
TECHNIP - ABU DHABI
Since September 2005 till present - Senior Structural Engineer.

NATIONAL PETROLEUM CONSTRUCTION COMPANY ''NPCC''
Since Jan 2002 till July 2005 - Senior Structural Engineer / Deputy Lead Engineer.

ENI - AGIP - TECNOMARE S.P.A, ENGINEERING COMPANY.
April 1996 till Dec. 2001 - Structural Engineer / Project Technical Coordinator.

ENGINEERING DESIGN AND CONSULTING CENTRE ''EDCC''
Nov. 95 Till Feb. 96 - Civil Engineer.

THE EGYPTIAN COMPANY FOR METALLIC CONSTRUCTIONS METALCO
Oct. 95 till Dec. 1995 - Tender studies engineer.

SUMMARY OF ACQUIRED EXPERIENCE AND MAIN RESPONSIBILITIES:
- Definition of key deliverables, assignment of work, supervision and provision of professional guidance and technical support for engineers and draftsmen. Trouble shooting of structural issues and ensuring adequacy and accuracy of the engineering analyses and deliverables.
- Revision of the work provided by external bodies and ensuring that work is completed in accordance with sound engineering practice and the applicable design codes.
- Follow up with construction yard and offshore supports during installation campaigns.
- Performance of feasibility, basic and detailed engineering analyses and calculations including; modelling and code compliance checking for offshore Jackets, Topsides and FPSO including: in-service and pre-service; inplace, seismic, pile driveability, dynamic response, fatigue, collapse, loadout, transportation, lifting, appurtenances and miscellaneous design calculations and barges structural integrity verification.
- Performance of re-instatement, repair and modification of offshore platforms. Including site survey, structural integrity verification and final technical recommendation.
- Liaising with multiple stakeholders including: clients, subcontractors, internal disciplines, international certifying authorities and marine warranty surveyors.
- Tendering activities performed for structural and civil works and for sub-sea inspection campaigns including: preparation of tender technical packages, bid evaluation and selection of contractors.
- Commissioning of sub-sea inspection campaigns for offshore structures and pipelines including; activities breakdown definition, planning, scheduling and execution supervision.
- Assessment of the sub-sea inspection reports, provision of the technical recommendation to the client for platforms and pipelines.
- Development of activities break-down templates for sub-sea inspection survey projects, structural assessment projects and civil works design projects.
- Development of specifications including: civil works general specification for construction and testing of materials, pipeline sub-sea inspection, topographic survey, soil investigation and sub-sea clamp grouting.
- Preparation and revision of structural design procedures including; Inplace, Dynamic Earthquake, Deterministic Fatigue, Spectral Fatigue, Collapse (Push-over), Wind Fatigue, Wave Response, Lifting & Upending, Jacket Floatation, Padeye Design, Deck Node design, Trunnion Design, Fender Design, Clamp Design, Panel Lifting, Dropped object, Conical transition and cathodic protection for offshore jackets using sacrificial anodes.

FAMILIAR WITH THE FOLLOWING CODES AND STANDARDS:
API (RP 2A-WSD 21st 2002, 2A-LRFD 1st 1993), DNV (RP B401 1993, Classification Note 30.1 May 1992), AISC WSD 9th Edition, BS (5950 Part 9 1994, 5950 Part 6 1995, 5950 Part 1, 5400 Part 10 1980), Nobel Denton (0027/NDI Oct. 2002), Lloyd's Register (Part 3 1988, Part 4 1988), Civil Aviation Authority CAP 437, The Egyptian Codes (Concrete Structures Limit State Design 1995, Steel Structures WSD 1995).

PERFORMED WORK USING THE FOLLOWING SOFTWARE:
MS Project 2002, SACS 5.2, GRLWeap 2003, DNV SESAM, MCS Nastran, WS Atkins ASAS 11.1, SAP90, MS Office 2003 package and relevant Internet applications.

WORKED IN PROJECTS FOR THE FOLLOWING COMPANIES AND CLIENTS:
Total Upstream Nigeria, Technip Paris office, SHELL UK, ENI-Agip, Tecnomare UK, Total Fina Elf Qatar TFEQ, Qatar Petroleum QP, ADMA-OPCO, ABB Lummus Global B.V., SLP-UK, Occidental Petroleum of Qatar Ltd OXY, Agiba, Geisum, Magawish and Petrobel.
Project description, main activities, design office and client.

DETAILED PROJECTS:
- AKPO Field Development Project FPSO Topsides. Design of the Topside modules of the permanently moored Floating, Production, Storage and Offloading unit at water depth of 1300m and Hull dimensions 300m by 60m.
Senior Structural Engineer. Responsible for the analysis and design of MP/HP gas compression module, of 2900 tonnes and 28m by 26m overall dimensions. The analyses include: Operating conditions, Hull damage condition, Blast, Lifting, Transportation, along with the revision and approval of vendor documents, checking and controlling the relevant drawings. Interfacing with the internal disciplines.
(Technip - Abu Dhabi, performed for Technip Paris Office / Total Upstream Nigeria Limited, from September 2005 till present)
- Idd Shargi North Dome Development project. Pre-service and construction engineering for 4 platforms in 35m water depth including Jackets & Topsides.
Deputy lead structural engineer, liaising with client, marine warranty surveyors, construction yard and offshore installation department. Responsible for the revision, approval and re-performance of the pre-service analyses and the construction engineering endeavours, providing guidance for engineers and draftsmen. Following up with the construction yard.
(NPCC - Abu Dhabi, performed for OXY, from April 2004 to May 2005)
- Preparation and revision of the structural department design procedures.
Senior structural engineer responsible ensuring adequacy, accuracy and compliance with the applicable design codes and standards. The procedures included; Inplace, Dynamic Earthquake, Deterministic Fatigue, Spectral Fatigue, Collapse (Push-over), Wind Fatigue, Wave Response, Lifting & Upending, Jacket Floatation, Padeye Design, Deck Node design, Trunnion Design, Fender Design, Clamp Design, Panel Lifting, Dropped object and Conical transition. As well as the update and verification of padeye design software and structural calculations template spreadsheets.
(NPCC- Abu Dhabi, internal Job, from June 2004 to March 2005).
- Al Khalij Northern Area Field Development project. Detailed and Construction engineering for DP4 and PP1 60m water depth jackets and topsides.
Senior structural engineer / Deputy lead engineer for DP4 platform package, liaising with client, marine warranty surveyors, construction yard and offshore installation department. Responsible for the revision, approval and performance of the in-service and pre-service analyses and the construction engineering endeavours. Provision of technical guidance to engineers and draftsmen. Following up with yard construction. Provision of technical assistance during offshore installation (Doha).
(NPCC - Abu Dhabi, performed for TotalFinaElf Qatar, from August 2002 to September 2004)
- S94 WHT Reinstatement Project, for a 23m water depth damaged jacket, utilizing the damaged jacket to support new installed topside together with a new installed jacket.
Senior structural engineer, responsible for the none-linear collapse analysis to calculate the strength of the damaged jacket. Liaising with the client and warranty surveyor for the approval of the analysis theory and results. The analyses theory was based on the results of the accident Time Domain Motion Analysis report, preformed by the Noble Denton Ref. B.5462/NDA/VL Sept. 2000, and the survey of the deformed jacket configuration. The analyses considered application of none-linear forces with variable magnitude and direction to achieve the same deformed shape of the existing jacket and to compute the corresponding stresses which will be added to the stresses arising from the environmental loads.
(NPCC - Abu Dhabi, performed for ADMA, from February 2002 to May 2002)
- Offshore Khuff Gas development Project for Abu Al Bukoosh Field.
Structural engineer responsible for the structural modification of the existing GLP and AKC topsides. Liaising with construction yard and internal disciplines.
(NPCC-Abu Dhabi, performed for ADMA-OPCO & ABB Lummus Global B.V, from February 2002 to August 2002)
- Structural modification, design and upgrade of HLS-2000 Crane Vessel.
Lead structural engineer, liaising with offshore marine warranty surveyors, construction yard and structural design and drafting teams. Responsible for the analyses and design of the boom rest support, boom installation, A-frame installation, winches platforms, structural integrity verification of barges during crane capacity test. Revision and approval of engineering deliverables and construction drawings.
(NPCC- Abu Dhabi, internal Job, from January 2002 to April 2002).
- Belayim field development, modification and Installation of facilities and risers on 12 existing platforms.
Project technical co-ordinator and Structural engineer, interfacing between client and Tecnomare branches and disciplines, responsible for the structural integrity verification of the existing platforms under the new imposed loads and operating conditions including: inplace, seismic and fatigue analyses, determination of piles capacities, vortex induced vibration, wave slamming and design of clamps. Liaising with internal disciplines, client and marine warranty surveyors.
(Tecnomare - Venice, performed for Petrobel, from May 2001 to August 2001)
- Ashrafi offshore field development project, installation of water injection plant on existing 47m MPA platform.
Project technical co-ordinator and Structural engineer. Liaising with the client, the machinery suppliers, the installation & fabrication contractor and Tecnomare internal disciplines. Carried out complete analyses and detailed design of the new topside extension and the jacket structural modification including: inplace, seismic, dynamic modal analyses, fatigue life check, design of the vibrating equipment supports and calculation of piles capacities. Carried out relevant offshore site visits and clarification meetings with client and warranty surveyors.
(Tecnomare - Venice & Cairo, performed for Agiba Oil Company, from December 99 to August 2000)
- Ashrafi offshore field feasibility study for topside extension to accommodate the installation of a new water injection plant on the existing 47m MPA platform.
Structural engineer, responsible for the preliminary design of the new topside extension, determination of pile capacity, preparation of MTO, conducting technical meetings with the client to present the proposed alternatives.
(Tecnomare - Milan & Cairo, performed for Agiba Oil Company, July 99)
- Ras Qattara El Faras Onshore water injection plant.
Project technical co-ordinator and Structural engineer. Liaising with client, contractors and Tecnomare internal disciplines. Carried out project endeavours including the preparation of the tender documents, technical and commercial bid evaluation. Preparation of project specifications including: civil works general specification for construction and testing, specification for topographic survey and soil investigation specification. Carried out design activities including the design of machinery foundations, civil works and pipeline supports. Carried out relevant site visits and construction supervision.
(Tecnomare - Cairo, performed for Agiba Oil Company, from July 98 to June 99)
- Tecnomare Egyptian Branch Development of the branch procedures and activities break-down templates for sub-sea inspection survey projects, structural assessment projects and civil works design projects.
(Tecnomare - Cairo, internal job, during year 99 and year 2000)
- Ashrafi Offshore Field sub-sea inspection project, inspection of sub-sea Pipeline and two platforms MPA & WHP2.
Project technical co-ordinator and Structural engineer. Liaising with the client, the sub-sea inspection contractors and Tecnomare internal disciplines. Carried out project endeavours including the preparation of tender documents, bid evaluation, contractor selection, activities breakdown definition, planning and scheduling. Carried out the commissioning, execution and supervision of the sub-sea inspection campaign. Carried out technical activities including the preparation of the sub-sea pipeline inspection specification, the revision and evaluation of inspection reports and issuance of the final technical recommendations.
(Tecnomare - Cairo, performed for Agiba Oil Company, from January 98 to December 98)
- SETTY Jack-up (converted into production unit) sub-sea inspection project, inspection of leg cracks and the update of as-built conditions. The project extended to include a feasibility study for the relocation of the exhaust flare.
Structural engineer. Carried out technical activities including the commissioning and supervision of the inspection campaigns using the MPI and Eddy currents techniques, evaluation and comparison of the inspectors¡¦ reports and issuance of the final technical recommendations. Study of the relocation of the flare including the weight calculations and the structural integrity verification of the new proposed location. In addition to the structural scope, I was involved in some technical co-ordination activities with the client, the inspection contractor and Tecnomare Venice.
(Tecnomare - Cairo, performed for Geisum Oil Company & Egyptian Drilling Company EDC, from October 97 to March 98)
- North Sea Block 47/8a Shearwater Offshore Field Development project, in-service analyses and design of 92m 2500 tonnes jacket.
Structural engineer. Carried out engineering analyses including inplace, dynamic, seismic and on-bottom stability analyses. Appurtenances design calculations for J-tube, risers and clamps including relevant checks for vortex induced vibrations and wave slam. Design of docking guide and mudmat. The project included technical meetings at SLP construction yard in Aberdeen.
(Tecnomare UK - London, performed for SLP & SHELL UK, from November 96 to April 97)
- Re-analysis of 32m water depth platforms MWP3 & SWT113.
Structural engineer. Carried out in-service and pre-service analyses including: inplace, modal dynamic, seismic, fatigue life check, pile driveability and single pile analysis. Carried out design calculations for mudmats and clamps. Analyses performed with Tecnomare in-house developed software for modelling and calculation of environmental loads then using MCS Nastran for the final stresses calculations.
(Tecnomare - Venice, internal job, from June 96 to September 96)
- Design of Flour Mills Silos and Industrial steel structures.
Civil engineer. Calculation and design of concrete mills, industrial steel covering frames using SAP90 software.
(EDCC – Cairo, November 95 to February 96)
- Tender preparation for industrial compound.
Tender engineer. Tendering and estimation activities for steel sections fabrication, corrosion protection and erection at site.
(METALCO – Cairo, October 95 to December 95)
- Windsor El Zaafarana Hotel.
Civil engineer. Design of concrete villas and buildings for a 5 stars hotel on the Red Sea shore.
(Private work – Cairo, August 95 to November 95)

TRAINING:
- Electronic revision and approval of vendors' documents, Technip 2005.
- E-Procurement, 2005 by NPCC.
- Offshore sea survival training, 2005 by GTSC Abu Dhabi.
- Technical Report Writing Skills, 2005 by Pacific Consulting Services.
- Team Work and Team Building, 2004 by CCC.
- Leadership for Young Engineers, 2004, by CCC.
- Introduction to Design of Oil Tanks, 2001, by Egyptian Consultants.
- Introduction to QA, QC and ISO 9001 standards, 1996, by Tecnomare Venice.

LANGUAGES:
- Native Arabic.
- Fluent in both spoken and written English.
- Fair Italian.
- Fair French.

VOLUNTEER ACTIVITIES:
- Active Member in the Project Management Institute Arabian Gulf Chapter PMI-AGC, assisting the Director of Abu Dhabi in planning and managing the activities such as; workshops, technical presentations and seminars, membership development,. .etc. (2006)
- Conducting educational courses for PMP certification candidates.
- Acquired strong skills in communication and management of personnel through my participation in volunteer activities such as: Representing the Egyptian youth in the Rotary International and the United Nations conference for Population and Development, President of Rotaract Club, Secretary of the Young Businessmen Committee of the National Democratic Party, President of the Population and Development Rotaract Committee District 2450.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 1649)

Go to Search Parameters...

Brief Description

Expertise in Project Engineering, Cadd Management & related fields.

Instrumentation, Construction Engineer, Commissioning Engineer, Shutdown, Turnaround, I/E Lead, Designer, Design Specialist, Field Engineer, EPC, AutoCAD

Marine Engineering, Risk Assessment, Lloyds Surveyor, Project Management FPSO Projects worldwide

MBA & Licensed to Practice Attorney seeking Government Affairs Position

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

Versatile Procurement, Subcontracts & Facilities Manager with over 20 years experience in multi-contract project environments and with extensive international experience of major EPC projects within the power and oil & gas industries.

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

With more than ten (10) years of extensive experience and knowledge in Pipe stress calculation and support design of oil & gas, petrochemical, refinery, chemical, LNG, LPG, onshore, nuclear power plant and subsea piping projects.

33 years Mechanical & Civil Exp in QA/QC & Construction Management form$65.Million to $3.2 Million Projects. EXP. All Codes , ASME, B31.1 B31.3 AWS, , NBIC, ASME Sec.V, ASME Sec.VIII API-650 &653. Develope & writing QA/QC Programs, Site procedures Manuals, Project exection plans & Welding plans

Over 25 years Quality Management Supervision experience in the Oil & Gas and Heavy Engineering construction.

Experienced in managing and administering the total procurement cycle from pre-qualification to closeout of purchase orders and sub contracts for power generation facilities under turnkey (EPC) contracts as well as defense contractors and telecommunication industries. Experienced in Primivera Exped

Planning / Project Controls Manager , PMP certification, Primavera 3.1 / 6 professional user, Civil Engineer, Cost Control and Claims experience

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Multi lingual professional with MBA in Supply Chain Logistics. A proven effective communicator and negotiator with extensive experience in field operations supporting military, humanitarian and commercial operations.

Project management, commercial management quantity surveying

Automation/Electrical/Instrumentation/Supervisor

Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.

To contribute strong background in project management, civil engineering, contracts and along with unique drive for excellence and success to your firm in a Planning & Control Engineer position.

Engineering/Operations professional with sixteen (16) years of experience managing multi-disciplined projects.

Excellent interpersonal, oral and written communication skills, Good computer skills (MS-Word, MS-Excel, MS-Power Point, MS-Access, Oracle etc.). Excellent knowledge and Training on ISO 9001, ISO 14001, OSHA and OHSAS 18001. Master degree, Diploma in Safety, Training on HSE.

B.Sc., industrial Engineering with 10 years experince. in project organization , planning and control, contractor for the construction and utility project, line production planning and control. Quality control and assurance, maintenance, system analysis and inventory control.•gripe with relevant int

11 years of experience in the Oil & Gas, Carried out various endeavours including feasibility study, basic engineering, detailed engineering, construction engineering and the supervision of yard construction and offshore installation.

B.E. / 24Yrs / REC, Motilal Nehru, Allahabad. Work Experience: Projects/ Construction/ Consultancy/ Planning – 10yrs. Maintenance/ Planning/ ISO 9000 Implementation – 12yrs. Trainer / Q A & Q C /Turnover Documentation – 2yrs.

Telecommunications Engineer, with Bsc. In Telecommunications and Electronics, present occupation on Telecommunications Network Resource Management, Planning & Design Telecommunication Circuits Serving Electrical Networks. Consultant Engineer: Alarabi Engineering Consultants.

Senior Electrical Engineer with over 20 years of manufacturing, industrial, chemical, and power plant field experience.

My experience is mainly on industrial, oil & gas, petrochemical and infrastructure projects in India and Saudi Arabia. My qualification is a Masters degree in Construction Engineering & Management and i have for over 10 years of experience working on projects with multi-national companies.

Masters Degree Construction Management / Experience on Multi-Billion Dollar Greenfield Projects / Russia Experience / Civil Field Engineering / Contracts Supervision & Administration / Field Supervision / Construction Management / Scheduling / Estimating / Specification and Procurement of Materials

• High financial and numeric ability, establishment of policies and guidelines, playing many strategic roles for Multinational Companies’ Branches in Ecuador, South-America (+15 years)

Comptency Training Specialist - Manager

Civil Engineering graduate with over 16yrs of experience in Civil Works (12yrs in Middle East) with a versatile potential to utilize & develop the vast experience gathered in the field of pipelines & infrastructures, dedicated to contribute the best efforts for growth of the company.

Systems Engineer - SW HW Server Client Microsoft Linux Unix - networking WAN LAN VPN WLAN routing switching - Physics degree and scientific work in high voltage and superconductivity - 2 years mechanical engineering - relocate to anywhere - fluent English, German, French, some Portuguese (braz.)

T/A Siemens, Kawasaki, GE, Solar Turbines, Startup Manager, Operations, Combine Cycle

Experienced Project Manager/ QC / Controls Manager

Project Management. Scheduling, Ms.Project, Primavera, Budgetting. Engineering. QS, AUTOCAD, Structure Analysis, SAP2000, Site Engineer.

Instrument Engineer with 12 years experience

Safety Supervisor , HSE Supervisor for all oil/gas, Pipeline, Offshore Construction, civil Construction

Accounts Payable Manager, Office Manager, Fleet Manager, Accounts Receivable, Purchasing Manager, Administrative Duties

Free! Experience in both mining and construction industries throughout Western Australia both remote and metro.

Civil Engineer with Project Control experience and knowledge of Primavera (P3)

Certified General Contractor, Concrete finisher, Underground Utillities, Reliable, Creative,dependable

I have skills in project manage ment in: Aviation,Defence Telecommunications, Materiel Maintenance and Logistics.

Current experience overseeing the development, implementation and operation of safety and security programs.

20 years management experience including Construction Management, Project management, estimating and planning

A post graduate student currently completing MSc Environmental Conservation and Management. A fast learner, willing and able to grasp new technology. A competent team player, adept at following instructions and capable of working on own initiative. A highly motivated person, eager to find a vacancy

Florida P. E. No. 54962 & Texas P. E. No. 29648; Degree: Bachelor of Science in Civil Engineering - University of Texas, El Paso; Graduate Studies: 12 Hours-Civil / Ocean Engineering - University of Houston; Languages: Fluent in English and Spanish; Beginning French and Arabic

Project maintenance manager/planner/trainer

Seasoned Project Management professional with significant field experience in Civil construction projects including Quantity Surveying. Background includes successful execution of bridge & industrial building project. Solid leadership, teamwork and project management capabilities.

B.Tech-Mechanical Engineering, CSWIP-3.2 Senior Welding Inspector and LEAD Auditor-ISO 9000 having a 16 years experince in various levels in EPC projects ion Oil.GAS, Petrochemicals,Refinery and Pipeline in India, UAE,Nigeria, Saudi Arabia and Qatar.

I have done my B.Tech from the Indian Institute of Technology Delhi(IIT DELHI) in May 2007, a prestigious institute of India. Detailed information with regard to my studies, experience etc is enunciated in the annexed Biodata,Currently working as a Planning Engineer in Leighton International Limited

Registered Electrical Engineer and trained Quantity Surveyor, able to combine technical knowhow with commercial understanding into Quantity Surveying, Estimating and Sub-contract Administration

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out