Resume - Safety Manager seeking position

Misco Jobs

Resume #4394

CONTACT INFORMATION:
View contact information...

Qualifications:
* 22+ years Oil Field experiences both inland and offshore. Production and Construction.
* Authorized OSHA Instructor in General Industry Hazards
* Master Trainer National Center for Construction Education and Research (NCCER)
* Trainer for Petroleum Education Counsel Offshore Orientation and Petrochemical Safety
* Trainer Scaffold Building Certified by the Scaffold Building Institute
* Trainer in Red Cross First Aid and CPR, Trainer in Medic First Aid and CPR
* T-2 certified
* Computer literate with Microsoft Office Package
* Certified by the State of Louisiana as a Laboratory Technician
* Extensive Knowledge of Hydrogen Sulfide and related sulfur compounds. Have performed varied analytical techniques to measure the amounts of sulfur compounds from part per billion to 98 percent sulfur to include sulfur studies on various metals used for sampling of gas and liquid streams containing sulfur.
* Extensive experience in the sampling and analysis of oil, gas, water and soil samples to include reservoir fluid samples.

Experienced:
Safety Supervisor
Trainer
Laboratory Manager
Quality Assurance

History:

March 2001 to Present: Safety Director TCB Industries, Inc.

July 2000 to March 2001 Safety and Compliance Representative DC International contracted to Chevron U.S.A.

January 2000 to July 2000 Safety Trainer Stars Inc.

November 1991 To November 1999 Corporate Safety Director and Quality Control Administrator. Pencor Corporation

March 1981 To November 1991 Laboratory Technician SPL Inc.

December 1972 To March 1981 U.S. Army

Prior to 1972 Residential Construction while in School Used various types heavy equipment

Experience:
Current Employer: TCB Industries, Inc.
9521 Vorhoff
Abbeville, La. 70510

Supervisor: David Craig CEO

Currently I am employed as the Corporate Safety Director with job duties commensurate with job title. In addition to these duties I was given the responsibility of Personnel Manager in June 2003. This is a general oilfield fabrication corporation with approximately 160 employees. As the Safety Director I have the responsibility for all safety compliance to include training and reporting as required by regulations. I am also required to monitor job activities on various work sites. When needed I may also train other personnel to be Safety Observers for work site monitoring. I have developed a training matrix and have written materials to be used for this training. I have also written a safety manual and a compliance manual that has undergone severe analysis by our client base with no discrepancies noted. These items are available for review at any time.

July 2000/ March 2001 D.C. International Inc.
Lafayette, La.
Supervisor: Mitch Leblanc

Employed as a Safety, Environmental, Regulatory Compliance Specialist
On subcontract to Chevron U.S.A. with job duties commensurate with job title. This position was formed by Chevron as a pilot program to alleviate job hazards in a drilling environment. While filling this position I have been responsible for complete development of the program to include a system of checks and balances, reporting procedures, on-site required documentation, perform safety and compliance audits and reporting of the same to corporate support personnel. While on the job site it is also my responsibility to monitor all aspects of the operation and alleviate all job hazards as well as monitor the operation for possible violations of the NPDES Discharge permits and MMS, U.S.C.G. and OSHA rules and regulations. Monitor subcontractors to ensure they full fill the requirements of the contract and assist them with any issues that are found to be below acceptable standards. These standards include such items as Job Safety Analysis and work procedures, acceptance of critical components items and third party personnel and equipment, training requirements, Short Service Employee programs and Behavior Based Safety Programs.

01/01/00 – 07/04/00 STARS Safety Training and Regulatory Services
3660 Lormand Road
Maurice, La. 70555

Employed as a Safety Compliance Specialist. Job duties include Training of personnel in all aspects of OSHA and MMS compliance issues as well as assisting clients with safety audits and safety compliance issues.

11/1991- 11/99 The Production Enhancement Corporation
P.O. Box 926
Broussard, Louisiana 70518
Reported To: Owner and C.E.O. Bryan Sonnier

Last Position was as the Safety Manager/Quality Assurance Manager.
While in this position I was instrumental in acquiring the ISO 9002 registration for one company as well as wrote and implemented the program for three additional companies. Put into place a safety and training program which included writing an Environmental Safety and Health Training Manual as well as a Safety Manual. These programs where developed along the lines of the ISO 14001 guidelines for future registration.

As the Safety Director it was my responsibility to coordinate and perform training of laboratory and field personnel in a manner which precluded no reduction of productivity at a minimal of expense. Training included New Personnel Orientation, Fire Safety, Respiratory Protection, Hydrogen Sulfide, Office Ergonomics, Back Safety, Hand, Wrist and Finger Safety, Chemical Hygiene, Personal Protective Equipment, Eye Safety, Small Tool Safety, Hearing Protection, LockOut/TagOut, Confined Space Entry, Compressed Gas Cylinders, General Housekeeping, Electrical Safety, Fall Protection, Heat Stress, First Aid, Bloodborne Pathogens and CPR, Environmental Assessment, Hazard Assessment, Hazard Communication Right To Know, Handling and Transporting Hazardous Materials (HM126), Cranes, Rigging and Forklift Safety, PEC Offshore Orientation and Petrochemical Safety, Slips, Trips and Falls, Hazwoper Awareness. Sampling and Sample Handling of high pressure gas and oil samples.

Perform Safety Audits of the facility and report to management, maintain all safety and training files on personnel as well as maintain all records of hazardous waste activities.

Maintain and report all required documentation for OSHA to include annual OSHA 300 Logs and complete all questionnaire's for client requested information pertaining to Master Service Agreements and Contracts. Review same for compliance issues. Develop and initiate safety and environmental impact assessments and performance reviews to remain in compliance with MSA and Contracts. Provide Hazards Assessments of all operations and mitigation events to provide for a safe working environment.

It was also my responsibility to monitor the Drug Screening Program to ensure all pre-access and random screening was performed and to initiate and report findings of all accident investigations.

The last three years there were no reportable OSHA incidents within the corporation.

As the Quality Assurance Manager, it was my responsibility to monitor and record all data necessary to remain in compliance with the ISO 9002 program to include tracking and reporting all non-conformance reports, corrective actions and out of compliance conditions. Maintain a master list of all calibration, Maintain all measurement and test equipment used for calibrations, Establish calibration schedules and notify departments of pending out of calibration conditions, training of quality control personnel performing quality control functions as well as calibrate equipment when needed. Perform Quality Audits and report results to interdepartmental managers and corporate management, establish quality audit schedules. Perform all scheduled reviews of the Quality Management System and Report findings to Corporate Management.

As the Quality Assurance Manager I wrote and implemented a Quality Assurance Plan for the corporation that eventually helped us to obtain ISO 9002 registration. This program included all aspects of Quality Control from Hold and Testing Points to Process Control and Final Reporting, Calibration of Equipment and Maintaining Test and Measurement Equipment as well as maintaining required files and documentation.

Previous Job duties within the corporation included laboratory manager chromatography lab. This is where I began with the corporation while in this position I was able to re-equip the lab and increase productivity four fold. I trained all chromatography personnel in proper laboratory procedures, provided the knowledge necessary for proper application of chromatographic plumbing for various applications and performed troubleshooting and maintenance of chromatographic equipment. I initiated, designed, and implemented an ASTM physical properties lab as well as a basic water lab and trained personnel to operate this equipment and perform analysis with little supervision. Maintained all records and files for Quality issues and conducted all audits for Quality and Safety both in-house as well as customer required. I also initiated, designed, built and implemented a portable laboratory service. This service is now serving the industry throughout the world with locations in Russia, Angola, and Trinidad. This service includes the sampling and analysis of oil and gas samples as well as reservoir fluid sampling using downhole sampling tools. At this time the company grew from 12 employee's to 80. A joint decision was made between myself and the owner for me to turn my daily lab duties over to other personnel to give me more time to dedicate to Quality and Safety and Training Issues. This was not a demotion but a lateral transfer to relieve me of to great of a work load. A manager was hired to take over my lab duties and an in-house promotion of personnel was conducted to place a manager over the portable laboratory service.

Reason for Departure: Downsizing Corporation due to loss of business revenue's and increased competition.

Previous Employment: 1981-1991
Southern Petroleum Laboratories
Lafayette, Louisiana

While with this company I worked as a laboratory Technician with duties consistent with this position. These duties included field sampling of Oil, Gas, Water, Air and soil samples for compliance testing, air quality as well as accountability for volume and BTU values. Duties also duties included ASTM physical properties testing as well as gas chromatography where I performed all chromatographic analysis, troubleshooting, maintenance and calibrations. I maintained and operated a portable laboratory which I used throughout the southern regions of the United States and Offshore for on-site analytical services. Analysis included air monitoring, sulfur content, & BTU values locations associated with this sampling and analytical work included such varied area's as production platforms, drilling locations, sulfur recovery plants, landfills, fire investigations of building fires, propane and NGL plants. Maintained all required records and provided all data needed for Quality Related Audits. Assisted with Quality Audits by Clients.

1972-1981
U.S. Army
My last duty assignment was at Fort Hood Texas where I was in charge of the Base Petroleum Laboratory. My primary military occupational specialty was list as a 92C petroleum laboratory technician with a secondary MOS as a 76Y supply. My duties included all aspects of managing and operating the laboratory to include training of personnel. This laboratory was considered a Quality Control laboratory that analyzed samples of all fuels, hydraulic oils and lubricants purchased from private refineries for use at the installation. The analysis performed ensured compliance with purchase specifications. While in this position I implemented a training program that was still in use as late as 1995. This program included a system of test and evaluation of technicians on a weekly basis. Army wide testing of all personnel in this field conducted in 1980, the last year I in this position revealed the technicians under my direct supervision scored highest of all with scores exceeding the 93 percentile three of which were the three highest army wide scores. The average army wide scores were in the 80 percentile range. 9 years military experience, 8 active army with 1 year reserve duty, with courses in leadership, training, supply, first aid, Air assault and marksmanship.

1968 Through 11/72 Blissett Brothers Construction
Started with Blissett Brothers Construction as a general laborer in the apartment and residential building industry. While with this company I filled various positions for the completion of building projects from preparing the land as a heavy equipment operator using such equipment as tractors, backhoe's, bulldozers and dump trucks, preparing and pouring the concrete foundations, framing, roofing, finishing the interior, electrical helper plumbing helper and painter. I also worked as a paint crew foreman as well as a landscape foreman.
Reason for Departure: Joined the Army

Personal Data:
I am currently married with 3 children and 3 step children all of which are grown and out of the household.
I currently own my residence in Maurice Louisiana
Hobbies include fishing, hunting, horseback riding and carpentry
Born on December 7, 1954 in Dothan Alabama where I remained until joining the service in 1972. I am willing to relocate if required.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 1636)

Go to Search Parameters...

Brief Description

Experienced Cad Manager/Project Coordinator. Multi Discipline Design. Proficient with 3d modelling using Autocad, ADT33, Autoplant, CadDuct and MultiSteel. Also experienced in using Microstation, PDMS, Prime Medusa and ProCadam. Engineering background - Structural/Civil.

Experienced in total project control from tendering stage through to commissioning and hand?over. Experienced in managing and training of multinational workforces. Experienced in Labour selection and control procedures.

Profesional in the industry with technical management and sales background.

PERSONAL RESUME

23 years project management

Over 20 yrs of QA/QC Manager, Construction Manager, Project Manager

31 years experience (10 years international)in project and contract management of large scale industrial projects in the oil & gas (onshore & offshore), alumina, petroleum, brewing, iron ore, nickel, gold and general mining industries.

I am very interested to offer years of hands on construction management and or supervision to you for the unannounced position in the selected communities in the areas you mentioned anywhere in the USA.

Coal Geologist/Geotechnical Engineer

My job duties included scheduling, overseeing, and inspecting various jobs sales, clerical, scheduling and overseeing jobs, as well as site surveys and project submittals. .

Mechanical/Construction/Millwright Superintendent

QA/QC/NDT inspector, trainer, or manager - structural steel, power piping, transmission pipelines and nuclear - AWS D1.1 QC-1 CWI, and level II in RT, UT, MT and PT per SNT-TC-1A - Computer literate -

University degree in Logistic's & Economics, 13 years hands on Middle East experience in all Procurement matters of small to huge EPC (design & built) Construction projects in public, defense & petrochemical works in both managerial & operational positions.

IT leader with solid accomplishments working for global industries for the last 20 years. Value delivered in Brazil, Argentina, United States, Canada, Uruguay, Puerto Rico, Colombia and Germany. Focus on IT ROI, management, planning and operational excellence.

MBA Project Manager experienced in managing both infrastructure and application development projects.

* Construction Project Manager * Engineering Design Manager * Civil/Structural Engineer

Hotel&Resteraunt Management Certification Thomson Education Direct

Construction Manager/Superintendent in Design Build

20 years overseas experience

Qualified and experienced in the construction/engineering and agricultural sectors - seeking position in the Middle East in one of the above areas. British Passport holder.

I am a 58 year old Vietnam Veteran. I believe that safety comes first on the job-site, and it is of the utmost importance to do the job correctly the first time in a professional manner. I do not believe in problems only solutions.

I am a SHE Manager with 20 + years experience in the diverse aspects of Safety, having developed and implimented programmes on large construction sites Qualification wise I have completed my indentures a Plater welder and a 4 year Higher National Diploma in Safety Management

Objective A challenging position with the opportunity for advancement in the field of Logistics, Warehousing and Distribution, utilizing extensive, practical skills and training gathered over 25 years experience in a logistics-based background.

27 years experience in integration of controls, electrical construction and service. Management and installations of electrical systems including but not limited to: industrial & commercial installations, networking including fibre, power quality mediation, controls, S.C.A.D.A., …

Seeking a Operation Manager position. Offer extensive hands-on and supervisory experience in multimillion-dollar commercial projects within the construction industry."

Registered California architect with 14 years construction management experience acting as owner representative for governmental agencies managing the design and the construction of various types of facilities.

Enriching a company in the Mid-Atlantic building products market.

The resume summary is included in the resume.

Safety Manager seeking position

international c.v.

Mining Engineer and Geologist with twenty-seven years’ experience in precious and base metals, coal and industrial minerals. Professional Engineering licenses in three states, with unique construction and engineering achievements. Advanced technical and strong supervisory skills.

I have been working in construction industry for Oil & Petrochemical Plant for decades. I work well under pressure and very keen on project planning and management. I am confident in leading a team of sub-contractors in performing sophisticatedly for any petrochemical processing plant.

I have been working in the Construction Industry for 40 years at all levels up to Construction Manager. I have extensive experience overseas including Africa and Asia. I am looking for similar work and am prepared to work anywhere at immediate notice.

Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.

UK qualified accountant(FCCA).Experienced finance and administration manager with expatriate credentials.

Supply Chain Management, Cost Reduction, Global Product Management, Inventory Planning, Process Development, Cost Management, Vendor Management and Relationships

Over 25 years of diverse and successful experience in material control in areas including: Nuclear/Coal Power Generation, Bulk Handling & Storage, Co-generation, Commercial Maintenance, Oil Refinery, Warehouse/Distribution, Shutdown/Turnaround and Outages.

Project Manager with over 35 years of experience in the construction industry, which offers an extensive and diversified array of industries such as power generation, pharmaceutical, semiconductor, large office facilities, pulp/paper and plastic projects, coal gasification and others.

Highly motivated and results-oriented professional with exceptional leadership and interpersonal skills with an extensive background in construction industry.

Piping/Mechanical Superintendent

RESIDENT CONSTRUCTION MANAGER / SUBCONTRACTS MANAGER / CONSULTANT IN CONSTRUCTION OF PETROCHEMICAL PLANTS (SPECIFICALLY HYDROGEN /SYNGAS REFORMERS, ETHYLENE CRACKING FURNACES, PETROCHEMICAL UNITS INCLUDING DETAIL PLANNING AND EXECUTION OF SEVERAL PLANT TURNAROUNDS PROJECTS)

I have been supervising and managing Building projects for the past 20 years With great success. I am not only a man Who is a supervisor but I have journeyman Level skills at most of the major trades, This allows me to insure proper quality.

results oriented, hands on, Construction Management person with 20+ yrs experience in various facets of the industry specializing in Industrial, Mining Construction. Prefers international or remote work location.

Have been in construction for 35 years

Award winning Project Manager / Facilities Engineer.

Extensive background in the planning and profitable management of large scale projects/ programs in support of multi-million dollar business operations.

Twenty-five years experience in the construction/consulting sector.

I have a total of 20 years in heavy construction Safety

Construction Management: Site; Project; and Senior. 30 years experience broad managerial, technical, administrative, and commercial experience. Extensive experience in fabrication of Structural, Plate, Tanks & Pressure Vessels. Sales/Marketing U.S. and Internationally

Overall Knowledge in Mine Action

1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out