Resume - Hands-on engineering and construction individual with extensive experience in al...

Misco Jobs

Resume #62793

CONTACT INFORMATION:
View contact information...

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environment [tolerance for stress] in the area of refineries, oil & gas processing, power plants, petrochemicals and open pit mining. EPCM projects covered scope identification, engineering, brownfield & greenfield construction, turnover packages, and construction contracts management/procurement.
Ability to streamline procedures that improve productivity, cost controls and safety levels through expertise in:
Organization & Project Management Safety & Compliance Management
Preventive Maintenance & Troubleshooting Equipment API / ASME Code Specification
Specializing in:
GOSP's and WCTP's facilities Fossil fueled power plant and steam turbines
Tank farms and offsite utilities Compressors and pump stations
Onshore and deep sea loading terminals Plant subsystems fabrication and erection
LNG trains / Cryogenic equipment Field & yard fabrication – tanks, spools & bulk structural steel

Year Company - Location Client - Project Position
2007 - AMEC Americas – Canada ►DeBeers – Victor Diamond Project Site T/O Engineer
2005 - 2006 Worley Parsons – Iraq ►US Army Corps of Engineers - Restore Iraq Oil Project Area Engineer
2000 - 2004 Onyx & Co. – Canada ►Multiple Projects throughout Montreal Area Project Coordinator
1997 - 1999 Kellogg Brown & Root – Algeria ►Sonatrach Petroleum GL1K LNG Trains Overhaul Construction Engineer
1995 - 1996 Doyle Construction – Canada ► Multiple Projects throughout Montreal Area Site Coordinator
1993 - 1994 Norse Mekaniske A/S – Norway ► StatOil - Troll West Block 31/2 Onshore Support Mechanical Supervisor
1990 - 1992 Pipera CHP Plant – Romania ►S.A. Electrica - 2 × 3.5 MW Upgrade Project Plant Engineer
1987 - 1989 ThermoEnerg - Romania ► Cernavoda NPP PHWR CANDU-6 - Unit # 1 700 MW Engineering Technician
1984 - 1986 PromoTherm – Romania ►TPP South Bucharest - 2 × 100 MW Block Rehabilitation Mechanical Technician

Education &
Training Year University / Issuing Authority Degree Discipline
2004 - 2005 Quebec Ministry of Education Certificate Construction Management
2001 - 2003 U. of Montreal - HEC Graduate Diploma Operations Management
1995 - 1996 Dawson College Attestation of Studies CNC – Numerical Control
1994 - 1995 St-Laurent College Attestation of Studies CAD
1984 - 1990 U. of Bucharest – Polytechnic Institute M.Sc. - Engineering Mechanical

Professional
Membership European Federation of National Engineering Associations [FEANI] – EURING # 28633
American Society of Mechanical Engineers - ASME # 8604803
OSHA Tickets HSE / SHMP / Hazard Recognition / WHMIS / H2S / Fall Protection / First Aid / LOTO

Work Experience Details

2007 – to date Site Turnover Engineer - AMEC Americas
Responsible for final handover, site implementation of documentation acceptance, transfer activities from project & construction group to commissioning and client operations team. Developed team member's requirements and skill sets, roles and responsibilities, detailed assignment definitions. Defined document flow & methodology for preparation & submission of turnover packages w/ client. Compiled / reviewed & approved final documentation prior to client submission for transfer of care, custody & control. Managed QC records database, systems turnover processes, liaised w/ client personnel on system performance & quality record issues. Reviewed and approved construction contractor QC records, monitored status for compliance to specs / procedures, construction quality and turnover processes. Supervised preparation, content & flow of system commissioning manuals for customer acceptance. Coordinated / monitored project punch lists, ensured / verified punch lists & check sheets mitigation and sign off. Performed process systems walk downs, reviewed & established the completion status, identified outstanding items to be completed for final system turnover to the client. Responsible for off-sites & utilities mechanical completion and commissioning. Acted as site construction engineering manager cross-shift.

2005 – 2006 Area Mechanical Engineer - Worley Parsons Iraq JV
Performed equipment assessment, engineering analysis for projects ranging from WCTP / GOSP, pumping stations, offshore loading terminal to well workover / water injection stations. Covering North Area of Operations, technically accountable for evaluating & selecting process mechanical equipment needs, defining / specifying equipment, scope of work definition, budgetary estimating, generating mechanical datasheets / specifications, issued requisitions packages, and ensured equipment and machinery upgrading / installation is correct. Established supplier's requirements' ensure that process equipment is developed to operating parameters in compliance w/ current codes / plant requirements. Ensured that process equipment performed to specification, developed turnover documentation, ordered and cost justified capital equipment, trouble shot and solved specification problems. Involved in the early stages of the ABOT Upgrade Project to evaluate tenders for the Deep Sea Terminal contract and followed through after contract award as the South Area Support Engineer on the revamping contract for construction, installation and commissioning of the loading terminal. Reviewed vendor documentation, issued technical bids evaluation, reducing capital cost in compliance w/ FAR. Member of Squad Check Review for incoming packaged equipment.

2000 – 2004 Project Coordinator - Onyx & Co.
Assisted in operating a small general construction company.
Responsibilities included blueprint review and project analysis, preparation of construction documents, scheduling, subcontractor's selection and ensured compliance with specifications, codes, safety standards in desired timeframe, quantity and quality. Provided technical assistance to field engineers and craft foreman. Managed the toolbox meeting to assure compliance with safety and health regulations. Analyzed all applicable requirements [company, customer, regulatory] and developed work guidelines which encompassed the areas of performance, quality, and schedule and budget compliance. Ensured that all drawings, reports, schedules and other documents met the requirements of all relevant legislation, specifications, procedures and codes of practice. Ensured that all engineering support provided satisfied the appropriate asset safety case. Enforced that performance standards were not compromised by engineering activities. Contributed to the development of the workload, schedules and estimates for all the individual work scopes and integrated plans.
Remained with the company until legal dissolution.

1997 – 1999 Construction Engineer - Kellogg Brown & Root
Duties included construction and coordination, systems inspection and isolation for shutdown/maintenance, commissioning of the LNG plant and loading terminal. Responsible for off-sites mechanical outstanding punch lists, performed detailed precommissioning, prestartup inspections Interfaced on behalf of the subcontractors regarding area access, determinate local area requirements, planned / organized work with anticipation for needs, potential problems with foreign and local national subcontractors. Completely overhauled the LNG / LPG process equipment and facilities for Sonatrach - National Algerian Oil & Gas Co. Rebuild the concrete seawater intake and refurbished the vertical centrifugal pumps eliminating the outdated equipment. Overhauled / refurbished specific LNG process/mechanical equipment, valves, pumps, gas reinjection compressors, exchangers, and related piping / fittings up to 42". Removed & replaced waterwall, superheater and damaged structure / refractory for 360t/h @ 70bar Mitsubishi boiler. Coordinated and supervised up to 200 construction personnel to assure preventive maintenance, breakdown repair and new equipment implementation.

1995 – 1996 Site Coordinator - Doyle Construction
Estimated work orders, ordered material and equipment, planned and scheduled manpower needs by craft. Scheduled work execution, obtained necessary permits, supervised craft activities, coordinated work plan to avert bottlenecks, monitored progress and performed QA/QC tasks. Conducted and documented weekly safety meetings. Prepared site daily reports and documentation as required. Accrued responsibilities included choke point troubleshooting, liaising with customers, organizing outside repair and service work, advising / ordering parts / materials and service on a range of construction equipment.

1993 – 1994 Mechanical Supervisor - Norse Mekaniske A/S
Mechanical technician jointed to a dedicated team for assemblies checks, testing and repairs of hydraulically operated cylinders and lifting equipment. Performed pre and post maintenance checks on equipment to ensure efficient and safe operation. Duties included monitoring the calibration and inspection of the testing bank, inventories and ordering replacements for unserviceable tools. Developed equipment downtime reports, prepared logs for repairs / preventive maintenance and in service hours. Ordered, received, stored and issued spare / repaired parts. Identified, recommended and implemented improvements to line procedures, equipment and/or facilities to enhance the productivity, quality or safety of products, processes and/or procedures.

1990 – 1992 Plant Engineer - Pipera CHP Plant
Major fossil fueled TPP equipment included 2 x 50t/hr B&W boilers @ 450 °C & 40 bar, 3 x 100Gcal/hr @ 2200 t/hr hot water generators, 2 x 3.5 MW ABB steam turbines, water treatment plant, heavy fuel oil / gas storage & heating facilities, steam / water distribution systems and voltage transformers. Managed, planned, evaluated and coordinated the execution of preventive / predictive and corrective maintenance, as well as outages. Successful capital projects include major upgrades to the heavy fuel / BM system and water treatment plant resulting in an annual savings of around 5%. Coordinated major retrofitting outage - 65% boiler waterwall tube replacement and turbine overhaul. Assisted and acted as the plant liaison with outside agencies such as NPG – national power grid, corporate office departments and outside contractors. Supervised unionized employees within the confines of the collective bargaining agreement.

1987 – 1989 Engineering Technician - ThermoEnerg
Provided on-site construction support associated with the fabrication and installation of the CANDU type pressurized heavy water reactor cooling systems. Monitored daily construction progress, technical assistance, QA/QC and checked installation for project design conformance. Verified and documented that the system/equipment and utilities were erected and built to fulfill its purpose and specified requirements, operate in a safe, reliable, and consistent manner. Recorded field changes, completed post construction punch lists. Assisted with onsite fabrications, substructures, outfit of piping and mechanical equipment including testing and turnover. Conducted joint [with HSE representative] routine job safety audits, logged mechanical PTW such as Confined Space, Safety Clearance, LO/TO.

Work Experience prior to 1987 – upon request.
References – upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 1812)

Go to Search Parameters...

Brief Description

I have experience in Project management and planning, Maintenence Management and planning, Civilworks, Mechanical and electrical experience

Area of expertise includes: Office Management, Project/Staff Management, Training and Development, Budget Management, Procurement Management, Planning and Execution Skills, Secretaria/Confidential Services, Document Management, Coordination/liason, Team Building & Team Management, Logistics and Tran

Project Manager, QA/QC Wireless Telecommunications

Rotational Equipment, Power Infrastructure E&I, O&M, & International ISO Quality and Safety Systems

I have implemented and maintained 7 ISO 9000:2000 Quality Management Systems for several leading companies.

I am an experienced Wireline Supervisor with cased/open hole experience.

A high qualified mechanical engineer, Looking for challenging and rewarding career. My major Industry experience has been with a CAT Dealership in KSA; however my Sales & technical skills give me versatility within any Business which seeks excellence in product support functions.

Expediting Supervisor, Oil and Gas, Marine, Petro Chem

I am an Environmental and Chemical Engineer, working in an oil and gas sector as an EIA specialist at Kuwait

I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.

HSE Manager, Advisor for International Oil/Gas Company, Led Assets to top quartile performance. Graduate engineer and Certified Safety Professional

Very experienced in Logistics, Procurement, Warehousing, Material Control.

Barge Master, Barge Superintendent, Rig Mover, Marine Coordinator, CSR, Operations Manager 24 years experience in offshore Construction and Drilling

Vast Experience in Document Control, Administration, Human Resourses and IT

Constrol System Engineer /Automation Engineer

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environm

W/WW industry: 28+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component of W/WW systems

Mining Engineer with surface, underground, contracting, industrial minerals, metal mining, hard rock mining, block caving, narrow vein, cut & fill, dragline, international, process, frontline shift supervisory, mine planning, & permitting experience

Licensed professional civil engineer. Have worked mostly in construction as either an owner or an owner's representative. Enjoy doing field work and would like to work in a foreign country.

HR, Payroll, Operations

Professional Engineer, MBA, offshore oil & gas, Quality management, 11 years

MIT educated program manager/engineer seeks full-time employment in engineering, financial modeling/investing, or engineering management involving optimization, system identification, simulation, graphical user interface design/implementation, and/or control system design/analysis.

Systems Engineer - Project Planning & Control Specialist. Oil & Gas / HVAC / Construction

Project Manager (Electrical, Alarm Applications, Construction,Safety)

Perform environmental / safety audits Perform industrial hygiene surveys industrial processes, sewers, wells & tanks air, soil, solid waste, wastewater and water minimization and disposal of non-hazardous and hazardous waste potential or existing hazards for a wide variety of manufacturing OSHA

Civil engineer with 7 years experience.

Mechanical CAD Design Product and Tooling Development Engineeer

Long term experienced : wanted , Painting Inspector , Paint Superintendent or Technical Sales

Extensive experience in Engineering, Scheduling, Cost Control and Quality Assurance in Power Generation, Bio-technology and Manufacturing industries.

I have been trained and have experience integrating the spectrum of the logistics processes within the operational, acquisition, and wholesale environments. The major logistics processes include distribution, materiel management and contingency operations. Duties included directing and managing dis

Sr. Planner, Scheduler, Risk Management using Monte Carlo Simulation

Hands-on skill in Allen Bradley PLC, SLC, Panel Builder 32, RS logix, Frequency Drives,HMI software, SCADA-DCS, Industrial Mechanics and in Broadcast Transmitter.

15-years of experience as Document Controller for vendor & design documentation in gas and oil industry.

Experienced electrical sales, buyer, customer service,contract negotiations,job bidder

Land surveyor with over 30 years experience

I am having more than 3 years in Oil & Gas Refinery Field Constructions & I am worked as Materials Engineer, Engineering Coordinator, Planning Engineer & Now i am working as a Planning Engineer in GPS, Oman.

Environmental Health Safety and Emergency Management Specialist / Safety Trainer in Oil and Gas, Petrochemical and Marine Industries with 15 years experience.

Experienced underground hard rock miner. Any way you can point your finger I have mined

Experienced Administration analyst with areas of expertise in Strategic management, Finance, Logistics and supply chain, Contracts Administration, Business Administration along with latest british MBM degree in Business Management

Over 12 years of qualitative experience in Refinery, Oil/Gas and Petrochemical Plant.

I have completed Masters in Commerce( MCOM) and i have more than 7 years expereis in Accounts/Audit.I have strong knowledge in Tally and SAP- Sales & Distribution model

Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR

International HR Manager

HSE Engineer with Quality experience, consultant, Mechanical Engineer

I have a comprehensive knowledge of Industrial Health,Safety &Environment with focus on Oil & Gas and construction industry safety, HSE Training, Inspection of facilities for proper HSE management system. Hazard & operability studies of Projects & sites' Job Safety Hazard Analysis & risk assessment.

Procurement Management, Project Manager, Expeditor, Logistics, Scheduler, Material Manager, Buyer, Purchaser, Contract Administration, Bilingual Spanish, Pricing and Biding, Quality Assurance

12 Years of Experience in the field of QA/QC Supervision Inspection of Electrical,Instrumentation and CathodicProtection Systems for Oil & Gas Producing Utilities, Remote & Relief Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, etc

Key skill: Design and Implementation of quality management system Education: Degree in Mechanical Engineering (A.M.I.E) from “The Institution of Engineers”-India Certifications: ISO 9000:2000 Series QMS Lead Auditor - course conducted by B.V.Q.I.

MBA-HR and International business

I have extensive experience in a wide range of Instrumentation and control systems; covering a range of job functions in various industries i.e. process, chemical and petro-chemical, on-shore oil & gas, pharmaceutical. Involvement in all areas of instrumentation engineering: electrical interfaces an

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out