Resume - Checkout, Startup Commissioning I&C

Misco Jobs

Resume #65285

CONTACT INFORMATION:
View contact information...

Experience

2006 – 2007/present

Fagen Incorperated Granite Falls Mn.

Commisioning Engineer

Fagen Inc. is the largest builder of Ethanol plants in the U.S. As Commissioning engineer I have started up several new ethanol plants of various sizes from 40 MGY to 100MGY. Responsibilities included plant DCS system checkout and commissioning. DCS systems are Siemens APACS running Wonderware software. Also included mechanical and electrical equipment checkout, grain elevator equipment and hammer mills checkout, instrumentation calibration, cooling tower systems commissioning. Also responsible for establishing construction priorities for plant completion and maintaining established target date milestones.

2004 to 2006
Cal Energy, a MidAmerican Energy Company. Calipatria Ca.
I&C/DCS Technician
Instrumentation and DCS support for 13 generating units in 6 geothermal power plants located in the Imperial Valley, Ca. Supported Foxboro I/A DCS running on Sun Unix platforms, Emerson Delta V DCS running on Microsoft NT4 operating systems. Also supported Woodward, Triconix, and Mitsubishi governor control systems and Bently Nevada temperature and vibration monitoring systems. Responsibilities included DCS repair, maintenance, data backups and programming, PLC trouble shooting and repair, maintenance and configuration of RTX plant data logging systems and well field SCADA systems. Using all the above systems along with Hathaway event data collection systems I was responsible for identifying causes of turbine trips and supplying supporting data and documentation. Implemented new Druck calibration system including instrument database configuration for all 13 units. Commissioned new Delta V DCS system expansion on Unit 4. Maintenance on FieldBus and Hart instrumentation.

2001 to 2004
Champion Systems, Jamestown N.C.
HVAC control system engineer
All aspects of commercial HVAC control system engineering and design from bid preparation to submittal including hardware specification. Including control system logic programming and graphic screen configuration of Delta Control DDC, BacNet, building control software. Computer screen design using Delta Control Orca View software. Control system logic design for chillers, boilers, air handlers, cooling towers and pumping systems. Supervised field network installation and performed system checkout and startup of the control system.

1998 to 2001
Systemation, Fairport N.Y.
Systems Integrator, engineering technician
Formed applied services division of Systemation with another individual. Focus was system integration for municipal water and waste water treatment plants. Systems used Modicon PLC's, Opto22 I/O and Citec software running on Microsoft NT4 server/operating systems. Services included panel design and fabrication, installation, configuration, calibration, start up and commissioning of systems. Provided factory trained field service for the sales division of Systemation on Foxboro instrumentation.
1985 to 1998
Total Control System Services, Inc., Varysburg N.Y.
President, founder and primary business manager.
Manufacturer's representative for several major lines of instrumentation. Provided repair, calibration, maintenance, installation and start up of instrumentation and control systems in New York and Pennsylvania with additional customers scattered from New England to North Carolina. Provided technicians for plant shutdowns and outages. Primary customers were water and waste water treatment plants, paper mills, food processing plants, hardwood lumber drying operations, and various other applications. My involvement included general business management, sales, system design, supervision installation, start up and calibration of instrumentation.

1978 to 1985
The Foxboro Co., Buffalo N.Y.
Field Service Representative, Sr. Field Service Representative, Systems Analyst
Provided field services for entire Foxboro product line. Supervised installation and calibration of instruments. Specialized in power system and boiler control system start up and commissioning for utility and industrial applications. Hardware experience included Foxboro DCS systems, electronic and pneumatic process control instrumentation and systems, and analytical instrumentation. Application experience includes Water and Waste Water, Paper and Pulp, Chemical, Food and Dairy, Refineries, Foundries, Steel works, and many other various applications.

Education
A.A.S. Electrical Technology, Erie Community College, Williamsville, N.Y.

Additional course work
Invensys Triconix System Maintenance for turbine controls
Foxboro I/A System Maintenance 2005
CiTec software configuration
Delta Controls OrcaView software configuration
BacNET configuration
BJ Systems Software (QNX) for process control
Foxboro/Eckhardt control valve sizing and specifying school
Foxboro Service Representative Power Systems Course for boiler and combustion control and commissioning
Foxboro Users course on power systems and boiler control
Foxboro Service Representative Training School
Foxboro Spec200, VideoSpec/MicroSpec, VideoSpec4, Spectrum DCS, Fox3/Fox300 and Foxboro scaling course for process control.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 1811)

Go to Search Parameters...

Brief Description

Operations, Purchasing, and Sales Manager

Production supervisor. Supervision and management of numerous mining, earthworks and civil construction projects in Australia and Africa. Experienced in operation of all surface mining equipment. Training of operators.

Sales, Marketing,Business development,Automobiles, Spare Parts, Lubricants, ,Pipes, Construction Machinery,Trucks Concret Pumps, Tyres etc.

Experienced involved problem solver with more than nineteen years of progressive experience, offering significant expertise in project management, manufacturing and oil and gas accounting management, and focused on management operations and am able to continue to learn new processes and apply them.

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

MEP project manager,project management,design co ordination & implementation,execution,commisioning and handing over with proper documentation,core electrical engineer,high rise buildings

As evidenced by resume I am extremely skilled in sales management and business development. I have extensive knowledge and experience in electrical, mechanical, mining ans sales/service management.

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Construction Management/Estimating/Supt/PM

Technical Writing with 15 Years of Experience in the UAE

Electrical engineer, Constraction, Control & Instrument, Coal, Oil & Gas projects,

Seeking Managerial or Supervisory position in Logistics & Transportation.

Chief Enineer, Limited, Oceans, Unlimited HP

Jamiu Badmos is a Registered Engineer cum HSE Professional with over 9yrs experience in QHSE & Project Management

Checkout, Startup Commissioning I&C

23 Years of Various field of accounting

Director

Professional with 4 ½ years experience in Oil Industry construction projects as contracts administrator and a cost controller.

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

Bridge, Highways/Roads engineer: A devoted qualified Civil Engineer seeking a challenging career opportunity in Bridges/Roads construction management projects in the Middle East/Africa regions

Construction Manager for large scale projects

MSc Engineering / Business Development / Project Management /Energy fielsd

Project Manager / Finance Management

22 YEARS POWER, PETROL-CHEMICAL, AND REFINERY INDUSTRY

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

I am currently Regional Safety Manager with Thiess John Holland in Melbourne Australia. I have extensive rail, mining and construction experience and have been involved in these industries for over 15 years. I have international experience, working with the Taiwan High speed rail project.

Tendering & Estimation, Proposals Preparation, Contracts Engineer

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Quality Control professional

25 years Industrial Construction experience as a Construction Manager, Superintendent, Project Coordinator, Estimator and Maintenance Planner.

Project Management, Supply Chain Management, Human Resources Management

Site Controller / Accountant <<< Cost Controller

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

Residing in Kuwait for over 12 years, Excellent 8+ years of experience with US Forces operated in Kuwait, Iraq and Afghanistan. Highly competent contracts administrator with extensive experience administering multi-million-dollar contracts for major projects in the GCC & Middle East.

Multi-skilled engineer

Summary of Qualifications: Proficient in this engineering software: 3D - PDS Equipment, Piping modeling/design,Isogen, SmartPlant Review, Microstation, AutoCad. Industries: Nuclear, Energy, Power, Petroleum / Refinery, Chemical, Logistics, Transportation, Manufacturing and Defense.

Develop and Execute marketing strategies/plans by analyzing current business situations in order to meet group's business objectives and also to maintain and increase sales. (Advertising/PR/Events/Promotions/Exhibitions/Market research)

Material Controller/ Expeditor

E&I Construction Supt.,Inspector, Commissioning Eng. 30 years plus experience, in various industries, at various supervisory levels.

Oil & Gas Exploration Project Manager - Spring Creek, Nevada resident - Forest Service, BLM , Tribal, State & Federal liason experience

Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Sales, Engineering Project Manager

12 Years of experience in the Project Management, Planning, Controlling, Production and Material Management

I am Mechanical engineering graduate with 18 years of experience with the Project Management & execution, Procurement & Contract Management. Executed Tendering, Commercial Evaluation, Negotiation, and Contract Administration for mega projects in Hydrocarbon and Oil & Gas sector. Involved in Concept

Project Manager, Field Engineer, Commissioning Electrical Switchgear

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Mechanical Engineer having 8 years experience in Petrochemical, Oil&Gas sector as Project Planning Engineer, looking for suitable position with family staus

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out