Resume - Over 34 Years of experience in NDE Field.

Misco Jobs

Resume #65420

CONTACT INFORMATION:
View contact information...

SUMMARY

* Over 34 Years of experience in NDE Field.
* Over 30 Years of experience in Vibration analysis.
* Over 18 Years of experience in Advance NDT Techniques such as Acoustic emission, Thermography, Eddy current (RFET) etc.
* Have good problem solving and analytical skills.
* Ability to work effectively and efficiently in an independent or as part of a team setting.

COMPUTER SKILLS

Operating
Systems: Windows Vista/9x/NT/Me/XP/2K, MS-DOS.
Software
Packages: MS Office, Spread Sheet, NSpectra III, MS Paint, AE Source locator, Data loading offloading from conventional NDT & Vibration equipment to PC for analysis.

EDUCATION

Maharaja Sayajirao University of Baroda, India BS in Mechanical Engineering

Professional Qualification

 ISNT Level II in Magnetic Particle Inspection.
 ISNT Level II in Ultrasonic Inspection.
 Basic Acoustic Emission Technique from Indian Institute of Science Bangalore, India.
 Basic in Vibration Analyses from IRD Mechanalyses.
 Advance in Vibration Analyses "Vibration Technology–II" from ENTEK IRD International (India) Ltd.

PROFESSIONAL EXPERIENCE

Gujarat State Fertilizers & Chemicals Pvt. Ltd. (GSFC), Vadodara, Gujarat India
Period of Service: Jan. 1970 – Feb. 2006

Sr. Manager Inspection,
Organization Details: GSFC is India's largest fertilizers & petrochemicals complex. Producing Ammonia, Argon, Urea, DAP, ASP, PA, SA, SO2 Oleum, Caprolactum, Melamine, Nylon 6, Polymer sheets & Nylon yarn.

Responsibilities:

 In the initial stage two years for commission of Ammonia II Plant with Japanese Engineers
 Remaining period in Inspection Unit for Health Assessment of in-service equipment, Heat Exchangers, pipelines, Furnaces in various plants deploying conventional Non Destructive Techniques (NDT) –Visual, Dye Penetrant, Magnetic Particle, Ultrasonic, Radiography as well as Advance NDT such as Acoustic Emission, Thermography, LRUT & RFET.
 Inspection of Repair maintenance as well as stage wise inspection of Replacement equipment at supplier's site.
 Acoustic Emission Testing for:
 In service equipment such as Ammonia bullet, Co2 Absorber, IG sphere, Desulphuriser, Methanetor, Transition piece, etc with certain discontinuity detected by conventional NDT were assessed on line & off line by AET for Structural integrity & put back into operation.
 First Time in Asia 15 Meter Diameter LPG sphere Of BPCL Refinery in Mumbai, Inspected & Certified for further service by Acoustic Emission Testing which was rejected by UT.
 Condition Monitoring of Rotary machines using Vibration measurements & Analyses.
 Analyzed 30MW Gas Turbine (Frame-6) for problem of high vibration during commissioning because of bearing, gears & base frame were detected & take-up with the supplier & resolved before final acceptance.
 Render Services to other Organization for NDT & Vibration Analyses for trouble shooting.
 Selection & Procurement of NDT & Vibration Equipment.
 Assessment, Tendering & Allocation work Order for NDT agencies.

Activities:

* Sub-Committee Member in NDT of Bureau of Indian Standards (BIS).
* Life Member of India Society for Non destructive Testing (ISNT).
* Executive Committee Member of India Society for Non destructive Testing Baroda Chapter.
* Was Secretary & Treasurer of India Society for Non destructive Testing, Baroda Chapter.
* Life Member of Indian Society of Welding.
* Presented technical papers in National as well as International conferences.
* Faculty member for NDT training courses.

References:
Available on request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 1651)

Go to Search Parameters...

Brief Description

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

PMP certified, PM and General management skills

Post graduate Engineer with experience in marketing, engineering, insurance survey.

I am an Oil & Gas Facilities Project Engineer (B.Sc. in Mechanical Engineering, 1980) My duties are to develop, supervise, and execute design, procurement and construction of engineered hydrocarbon projects.

Cost Controller with strong accounting background. Over 2 years experience as cost controller and 14 years as accountant with multinational companies. Technical skills include preparation of project cost control plans, budgets and forecasts, cost tracking, cost and revenue analysis etc.

15 years as QA QC inspector from first piece lay out to final inspection of all machanical parts. Have been QA/QC manager as well as Operational Support Manager

Installation, Operation and Maintenance Engineer (Mechanical)

12 + Years HSE experience, 27 + years overall experience on International Oil & Gas projects, dedicated professional with a hands on approach to maintaining the highest possible levels of safety. Effective organizational and good training skills; Experienced in onshore & offshore Middle East; Asia

Environmental Management & Permitting/Mining - Oil & Gas - Power - Infrastructure - Construction/Domestic (USA) & International

A Construction Manager with a wide range of experience in the housing construction industry. Proven leadership skills with the ability to work on own initiative and as part of a team. First class problem solving skills and dedicated to maintain high quality standards.

46 years international experience in EPC project management in oil, gas, power, petrochemical plants, refinery, iron and steel plants, mining, mineral processing plant and infrastructure design and construction. Activities include FEED to project delivery for greenfield and brownfield projects.

21 Years Experience in EPC/LSTK Project estimation, proposal, marketing, planning, project procurement and project management for Refinery, Petrochemicals and Fertilizer Plants like Ammonia, naphtha Cracker, PTA, Hydrocracker, DHDT, Sulphur and other units. Presently working with L&T, india.

Planner / Scheduler: 2 Years Experience, Site Engineering: 1 Year Experience Developing Schedules, Resource Allocations, Planning Spreadsheets, Deployment Schedules, Charts, Progress Reports. Review of Contractor’s Programmes, Specifications, Contracts. Tracking Correspondences, Archives.

project management.contract management,business management.

I hold a JD as well as an MBA in finance and have been a land manager for mining companies for the last 10 years. I am very well trained at acquisition, due diligence, negotiation, sales, entitlement, permitting and construction techiques. I have excellent references.

A Mechanical Engineer with Masters Degree in Quality Assurance Technology (M.tech).IRCA certified QMS Lead Auditor; ISO 9001:2000, ASNT Level II in RI,MT & PT NDT techniques. Around 20 years professional experience in Manufacturing, Planning and QA/QC disciplines.

Planning, Scheduling, Primavera, Artemis, Cost, Project Controls, Metrics, Construction Manager, Site Manager

Construction & maintenace of installations, equipment and systems in hazardous areas (explosive gas atmosph.); Maintenance of el. equipment, installations in petrochemical industry.& el. Equip., systems in El.Power Plant ; Training el.personnel for preventive & predictive el. maintenace programs

Senior Project Management, Profit and Loss, Project Planning, development and execution. Consultancy in the areas of safety, risk management, and techncal writing and editing. Major contract administration for a multi-national firm in Saudi Arabia on two different assignments.

Well versed in P3e, P3 and MS Projects with very good knowledge of spread sheets and MS Access database. Have experience of Petrochemical, Oil & Gas and Chemical Projects. Have also seccessfully executed few projects as Project Manager.

To acquire a technical/management position where engineering experience and managerial skills will significantly contribute to use the skills obtained through my experience and qualifications to benefit my employer and grow my self with organization.

Project Management, Cost Control, Estimating

Highly qualified Project Management Professional offering more than 20 years of project and construction management experience in managing and administering complex engineering and construction projects. Results focused and effectual leader with proven ability to set up project management systems

Logistics and Procurement Specialist

Employed as Sales Applications Engineer, I have supplied industrial, marine, mobile construction, process plant and aerospace markets pumps, valves, hydraulic & pneumatic components and systems since 1986.

Over twenty years experience covering all aspects of Document Control and Information Management responsible for the supervision of junior staff and the management of Document Control. I have worked in a variety of locations in the UK and overseas (Libya and Qatar)

Lead Control Systems Engineer / Project Manager having more than 16 years of experience with multinationals

Civil Engineer, board topnotcher and full Academic/University scholar. Expert and hands-on experience in Primavera P3.

Experienced EPC Project Executive with proven results through leadership and technical aptitude.

Planning, Scheduling and Cost Control Engineer

Detailed structural design and engineering, feasibility studies, project / contracts management, plant and building trouble stooting, QA / QC, contracts, project estimation, preparation and review of specifications,

Proficiency in using Primavera (P3), Primavera Enterprise, Expedition, Suretrak, Microsoft Project, Access, Excel And Other Related Software.

Over thirteen years track record for success in all phases of Landscaping Design, Project Management, and Nursery Operations

Industrial Construction Project Management

Control & Instrument Commissioning / Maintenance Engineer 01.10.2006

20+ yrs progressive exp. as a Sr. Supervisory Planning/Scheduling & Project Control Engr/Mngr with Risk/Contracts Exp, Int'l w/Utilities, EPC Firms/Consultants, Turnkey OEMs and Constructors within the Energy Sector. P3 Ver.3.1, Primavera Ent. P3e/cVer.5, Pertmaster, Claim Digger, MS Office, Acrobat

18 years of experience in the field of Inspection, QA/QC, Quality Audits, Design, Procurement, Construction, Project Management in a wide range of activities for Chemical Processing Plants to Oil and Gas Plants Piping, Static and Rotating Equipments, Storage Tanks, Pressure Vessels, Structures and

A higly qualified technocrat having more than 33 years of experiance inoperations, projects, and marketing.

Shipyard Coatings Program Manager

I am a Mechanical Engineer graduated from the University of Bangalore who passed out during September 2000. I got more than six years of professional post qualification experience in the Mechanical Engineering field. As a young budding Engineer, I am very much eager to join your Esteemed Organizatio

Chemical Engineer and experienced Engineering Facility Manager with strong project management skills and over 15 years experience in a highly regulated industry

Sales Planning & Execution, Sales Budgeting & forecasting, Senior level Negotiation, New Product introduction, Team building & Organizational leadership

Projectmanager process watertreatment wastewater water biofuels bio fuels plantengineering plant engineering engineer claimmanagement commissioning basicengineering, detailengineering sitemanager tendering scheduling calculation

Experience includes government procurement, commercial and R&Dcontracts, environmental, international (primarily renewable energy projects in the Middle East), limited intellectual property activities, and varied management and staff functions. Will relocate worldwide on a single status basis.

Over 22 years experience with sour oil & gas processing, acid gas injection, and heavy oil production facilities, on and off-shore. Over twelve years managing various technical support, trades and operations staff. Over nine years of overseas/foreign experience.

I currently hold over 18 years of government contracting experience including purchasing commodities, service contracts, repair, maintenance agreements and construction contracts via oral solicitation, request for bid (overseas), sealed bidding, and negotiated agreements.

Degrees in Electronics and Instrumentation.Highly detail oriented, and organized. Good planner, a self-starter with ability to meet deadlines, and personable. International experience in & gas and other industries.

Senior Planning Engineer, > 15 years experience in upstream oil&gas projects, construction.

15 years of experience in design, technical assistance and consultancy for railways, highways, motorways, bridges, metallic structures, consolidation of slopes, arrangement of platforms. Experience in setting out, cost estimates and materials engineer.

Over 34 Years of experience in NDE Field.

1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out