Resume - AT PRESENT I AM ON THE VACATION FROM PETROKEMYA (SABIC)KSA AND WORKING FOR ARCHI...

Misco Jobs

Resume #71650

CONTACT INFORMATION:
View contact information...

Sub: Application for the post of - Inst. & Control system Supritendent

I wish to offer my candidature for the above-mentioned post in your esteemed organization. I enclose here with detail of my qualification and experience for your kind perusal and consideration.

As such, I have gained good experience as Asst.Supritendent, Support supervisor, Quality control inspector and
Loop checking incharge for past 14 years in process Instrumentation, Static & Rotating Equipment Protection & Control System,Inspection, Maintenance, Commissioning, Start-up, Breakdown and Turnaround activities associated with Refinery, Petrochemical and Atomic Research centre in India and Saudi Arabia.

Presently Working in ARABIAN PETROCHEMICAL COMPANY (PETROKEMYA) a SABIC affiliated Company at Al ¡VJubail through Al-Hugayet Trading and Contracting Co since 2002 to till date as Control system senior.

Post Applied For: Inst. & Control system Superintendent

Experience More than 14 years in Process Instrumentation, Static / Rotating equipment Protection & control system, Inspection,, commissioning, start-up Maintenance, shutdown and Turnaround activities associated with Refinery, Petrochemical, and Atomic Research Centre in INDIA and SAUDI ARABIA.

Control System Engineer from 20th March 2002 to till date.
* Arabian Petrochemical Company (Petrokemya) Olefins ¡V III through Hugayet Trading and Contracting Co. Dammam KSA.
* Monitored and Managed all field instrumentation and control system activities related to production of (Ethylene, Propylene, Benzene, Butene) by the below mentioned process.
* Experience includes Feed preparation, Feed filtration, Cracking Furnaces, Boiler, Compressors, Separation, Sulfur removal, Refrigerant preparation, Benzene and Butene unit related Utilities.

Instrumentation Supervisor from 17TH Jan 2000 to 21st feb.2002.

* Saudi European petrochemical company (Ibn Zahr) AL ¡V Jubail (A Sabic affiliate) MTBE, PP¡V1 and PP¡V II Plant through Al ¡V Hugayet Trading and Contracting Co.
* Monitored and Maintained all types of maintenance activities related to
* instrumentation and control system like routine Preventive and corrective maintenance, Repair Trouble shooting Breakdown and Turn around activities for MTBE, PP- 1 and PP ¡V II plant. Also selected as support supervisor with the instrument team from maintenance side for the PP ¡V II world largest polypropylene project and after start up of the plant continued to the maintenance till company maintenance contract.

Asst.QA/Q.C Engineer( Instrumentation) from 24th Feb.1999 to 02nd Dec.1999.

* Hindustan Petrolium Corporation Ltd (Mahul). Mumbai India through Hyundai Heavy industries Ltd.
* Assigned as Asst Quality Assurance and Quality Control Engg.for their new DHDS ( Dehydrogen Desulpherisation) project since erection upto maintenance support by the construction company.
* During construction Involve in all the construction activities like checking of the instruments as per their specification and the client standard.Checking the instruments reliability physically and functionally.
* Inspection of the field instruments erection as per their Isometric drawings.
* verification of the connections in the field, marshalling cabinets, system cabinets and their consoles.
* After start up of the units worked with the maintenance Q.A/Q.C Engg.for updation of as built drawings also recheck and updated the drawings like ILD's
And P&ID's.

Instrument Supervisor from 05th Nov.1996 to 04th Dec.1998.

Arabian Alkali company.( SODA) Al ¡V jubail K.S.A (Direct Hire).
* worked as maintenance Supervisor have performed all the maintenance activities related to field instruments DCS and ESD system with full personnel and equipment safety like routine Preventive and corrective maintenance,trouble shooting for major problems.Also attended breakdowns and worked as lead man in the yearly turnarounds.

Sr.Inst. Supervisor/Q.C Inspector from 03Jan. 1995 to 19th Sep.1996.
* Booster Compressor Platform ( BCP ¡V A & B) ONGC Offshore Bombay High. India through Hyundai heavy industries Ltd.
* Appointed as Sr.Inst.Supervisor for upgradation of DCS with the TDC-3000
and ESD with the Triconix TMR also many of the field instruments by upgraded and advanced instruments and since commissioning phase assigned as Q.C Inspector on the recommendation of the client ( ONGC ) Quality control department and continued to the maintainence until service.

Q.C Inspector ( I/C) Instrumentation and Control system from 11th May 1993 to 05th Dec 1994.
* Bharat Petrolium Corporation Ltd. Mumbai (India) through Hyundai Heavy Industries Ltd.
* Joined as Q.C Inspector for their on going DHDS (Dehydrogen Desulpherisation) project. Assigned as Calibration shop incharge and responsible for testing and calibration of all types of field instruments, also responsible for layed cable inspection, cable termination in the junction boxes marshalling cabinets, system cabinets upto system consoles. During commissioning worked as lead man for the instrument commissioning group from ( BPCL) Client side and responsible for the night shift instrumentation activities by contractors and reporting to BPCL maintenance supervisor.

Loop checking Incharge from 13th March.1992 to 10th May.1993
* Bhabha Atomic Research Centre Trombay Mumbai through Hyundai Heavy Industries Ltd.
* Joined as an Instrument Supervisor and responsible for calibration of the instruments in the lab and in the field as well also worked as member of loop checking group and worked as shift technician during commissioning and startup after start up of the plant continued to the maintenance upto under warranty of the plant by the company.

Qualification

Academic: Passed Intermediate of Science ( I.Sc ) with Mathematics under the Bihar
Intermediate Education Council Patna.

Technical: Passed First Class Diploma in Instrumentation Engineering from
Aligarh Muslim University Aligarh. ( India )

Training
SAP Orientation Training, Ventil Computer Registration System for Test and
Reconditioning of Control Valve Training.

Job Description

ƒæ Honeywell TDC-3000, YOKOGAWA CENTUM XL,VALMET CLASSIC &VALMET XD Distributed Control System
„« System Failures Trouble Shooting and Maintenance.
„« Point configuration, Picture Editing, Group Configuration & Button Configuration.
„« System Backup Disk Preparation and Updating.
„« Loop checking & Loop Modification.

ƒæ TRICONIX (TRISTATION -1131), Modicon (984-680 / 685E) ABB August System,
ƒæ SIEMENS (SIMATIC S5-400 & S5-700), Allen-Bradley (PLC-5 & SLC-500), Programmable Logic Controller
„« System Failures Trouble Shooting and Maintenance.
„« System Backup Disk Preparation and Updating.
„« Loop & Logic checking.

ƒæ Trisen (TS 310) & PEAK - 150 Digital Control System as Governor
„« System Failures Trouble Shooting and Maintenance.
„« Loop, Calibration & Configuration Checking.
„« Card level Servicing & Repair.

ƒæ Mass and Volume flow metering station (Schlumberger 7915, Instromet 782-MS & Omni Flow computer)
„« System Failures Trouble Shooting and Maintenance.
„« Loop, Calibration & Configuration Checking.
„« Card level Servicing & Repair.
„« Preventive Maintenance check.

ƒæ Bently Nevada Vibration System (3000, 3300 & 3500 series)
„« System Failures Trouble Shooting and Maintenance.
„« Probe and Proximitor characteristics check.
„« Monitor & Proximitor calibration.
„« Monitor set point and setting configuration modification.
„« Rotor axial float and radial Probe adjustment.

ƒæ Indikon Torque meters
„« System Failures Trouble Shooting and Maintenance.
„« Monitor Calibration and Loop checking.
„« Card level Servicing and repair.

ƒæ Commissioning and loop checking of Sequence interlocks for Gas Compressors (Rotoflow Turbo Expander & Sundyne).
ƒæ Also having very good experience with SOE (Sequence of events) and PHD ( Process History Database ) systems.

ƒæ Inspection, Calibration, Commissioning, Repair and Preventive Maintenance of: -
„« Honeywell's Smartline Pressure, Flow, Temperature & Level Transmitters with Smart Field Communicators.
„« Rosemount Smart Family Pressure, Flow, Temperature & Level Transmitters with Hart communicators
„« Yokogawa Smart Family Pressure, Flow, Temperature & Level Transmitters with Hart communicators
„« Yamatake Smart Family Pressure, Flow, Temperature & Level Transmitters with Hart communicators
„« Valmet Conventional Family Presssure,Flow,Temperature &Level Transmitters
„« Pressure, Level, Flow, Temperature, Vibration & Electronic monitor switches.
„« Strumentazione industriale S.p.A Pitch control for Fin Fans.
„« Magnetrol Capacitance type level Transmitter & Drexel Brook RF level switches.
„« Endress and Hausser Ultrasonic Level transmitter and Level Switches.
„« Ohmart Nuclear Level transmitter and switches.
„« Pneumatic controllers & Indicators.
„« Masoneilan, Neles Jamesbury, Valtek, Novo pignone & Fisher Control Valves.
„« Fieldvue Digital valve controller DVC5000 series and DVC6000 series
„« Orbit On-Off Valves.
„« Temperature & Speed Monitors, Yamatake Controllers and Indicators.
„« Enraf Nonius 854 Advanced Technology Gauge for Tank Level Gauging Systems.
„« Rosemount Micro Motion Mass Flow Meters (CMF050 / RFT9739).
„« UV/IR flame detector maintenance, faultfinding, servicing and replacement of flame scanners and flame amplifiers for Boilers and Incinerators.

ƒæ Providing Technical and maintenance support for safe operation of the plant functionality of DCS and ESD System.
ƒæ Effective corrective maintenance breakdown period in PESD system, complex loop logic and replacement of I/O and associated modules.
ƒæ Involved in day to day preventive maintenance for field instruments, individually and team wise. Inspection,Calibration, Loop simulation based on ISO Procedures and standards.
ƒæ Co- ordinate with operation, Preparing equipment for maintenance and returning back to the safe service.
ƒæ Experience in case study of plant and modification implementation to avoid failure repetition
ƒæ Excellent skill in fault analysis and rectification in control system and field devices.
ƒæ Having good knowledge in servicing and calibration of Smart instrument devices with communicator, and servicing calibration of Pneumatic, Hydraulic, operated valves and accessories (Positioner, Booster relay, Lock up Relay, and I/P).
ƒæ Bently Nevada vibration monitoring system probe installation and calibration of probes and monitor with TK-3.
ƒæ Periodic check carried out in Trip loops and status confirmation.alarm simulation and verification.
ƒæ Trouble shooting and maintenance of rotating equipment protective control system such as Bently Nevada Vibration system,Trisen 310 Digital control system.
ƒæ Commissioning and Loop checking of Sequence Interlocks for Emergency Shutdown Systems and Unit Shutdown Systems..
ƒæ Commissioning of Solid-state (Electronics) based Interlock Control Panel.
ƒæ Commissioning of Microprocessor based Alarm Annunciator Systems.
ƒæ Commissioning, Maintenance and Trouble Shooting of CCTV and Weather monitoring Systems.
ƒæ Planning of Preventive Maintenance for all Field & Control Room Instruments as per company SOP.
ƒæ Preparing and Editing of procedures related to Preventive Maintenance for Instruments..
ƒæ Handling computerized Maintenance Management system (Maximo), SSRS (Sabic services request system) through SAP (System Application and product for Data processing ) system.
ƒæ Specially assigned for Instrument related failure Coding and Hierarchy preparation for Computerized Maintenance Management System (MAXIMO) developed in Oracle.
ƒæ Handling shifts independently & provided very good response on the on ¡V call in case of emergency in the plant. (05 years experience).
ƒæ Havin sound knowledge in safety factors within Hazordous locations and intrinsically safe equipments.
ƒæ I am fully conversant with P&ID. Process Flow Diagram, Hook up Interlock diagram, Logic Diagram, and IL Diagram.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 1649)

Go to Search Parameters...

Brief Description

Looking for senior position of project engineer electrical substation and T & D System, have MS from US in Electrical engineering and have over 17 yrs experiance of HV Substation Electrical field.

Indian, Chartered Civil Engr. Status, Aged 58, Civil Engg. Graduate (1970) With PG Dip in Management - 34 yrs in Engg / Construction out of which 25 yrs in O&G. Totally 21 yrs with Consultants / Clients & 14 yrs. with Contractors including 20 Yrs. outside India, in Nigeria, Oman, Kuwait & Qatar

Over 30 years of experience in the areas of QA/QC OBJECTIVE: A full-time position in Quality Assurance/ Contractor Coordinator/Construction Management.

A HIGHLY MOTIVATED AND COMPETENT MULTIDISCIPLINE ENGINEER with extensive hands-on experience in Offshore Oil and Gas projects and Power projects in India/ Malaysia/ Korea/ Brunei/ Singapore, who has developed:

Mechanical / Project /Construction & Commissioning Engineer/Manager BSc Hons.

25 years experience in Planning/Project/Detailed Engineering of Oil and Gas Plants, Petroleum Refineries and Petrochemical Plants

Aconex system user for Management on Line in Dubai Metro Project, 2. Health & Safety Environment (HSE Management), 3. Construction Management, 4. Computer software (Microsoft office& AutoCAD).

Electrical Engineer/Manager in Petrochemical Industries and Electrical Power Companies in Testing, Commissioning, Design, Projects, Plant Engineering, Maintenance, Operation, Technical Services, Training. Developement, System Improvements, Problem Solving, Analysis, System Study, etc

International Engineer and MBA.

A proactive, adaptable and conscientious scientist with five years international experience in Science, Education and Administration. Solid experience acquired in management of research grants, conference organization, scientific consulting, presentations and biological sciences.

AT PRESENT I AM ON THE VACATION FROM PETROKEMYA (SABIC)KSA AND WORKING FOR ARCHIRODON CONSTRUCTION OVERSEAS CO.S.A IN DOHA -QATAR ON THE VISITING BASIS AND ASSIGNED AS PROJECT INCHARGE FOR THEIR ON GOING QATOFIN MARINE PROJECT DOHA-STATE OF QATAR.

Technical manager of Construction & Services Companies - Manages all the company activities, adiministratives excluded.

Realiable and Multi Skills worker for engineering , construction, and mining related jobs

Graduate Civil Engineer with 13 years of experience in construction and Readymix concrete

Comfortable to work as Research Executive, System Analyst, Training Coordinator, Admin Officer

I am a safety practitioner with wide experience in construction, mining, dredging and marine, onshore drilling, etc. I have a good knowledge in MS Word, MS Excel and MS Powerpoint.

Procurement / Logistic Supply Chain Consultant

Professional 15 years experience in geotech and geology with engineering consultancy and construction company with various responsible position.

I have vast experience in pipeline inspection involving smart pig, pipeline cleaning, coating. Also, i have experiences in commisioning/decommisioning of pipelines and other engineering maintenance activities relating to static equipment. I am very conversant with Microsoft office and HSE standards.

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Chartered Project Manager in the UK with the CMI Body

Project Interface Manager, Stategy Planning, Engineering/Projects Development/Management/Controls

Seeking Managerial or Supervisory position in Logistics & Transportation.

Checkout, Startup Commissioning I&C

An Electrical Engineer with over 17 years of versatile experience in the field of Proposals, Contract Management/ Co-ordination, Marketing with sufficient exposure to ISO 9001 quality standards and Total Quality Management. Have undergone skill enhancement courses at IIT & IIM.

Achievement & result oriented with excellent communication, presentation & Interpersonal Skills.

23 Years of Various field of accounting

Director

Professional with 4 ½ years experience in Oil Industry construction projects as contracts administrator and a cost controller.

„« More than 11 years of professional working experience in an Oil/Gas, Petrochemical, & Electro-Mechanical Construction Industry; experienced in development implementation, quality, supervisions and inspections.

Bridge, Highways/Roads engineer: A devoted qualified Civil Engineer seeking a challenging career opportunity in Bridges/Roads construction management projects in the Middle East/Africa regions

Construction Manager for large scale projects

MSc Engineering / Business Development / Project Management /Energy fielsd

Project Controls Manager, with international experience in planning, scheduling, cost control, contract administration, business development and consulting services. Project management software: Primavera, MsProject, Material Manager, Cost Control. Languages: English, Spanish, some French & Italian.

Project Manager / Finance Management

Instrumentation Technician/Trainer/QA/QC

Senior Professional Geologist

I am currently Regional Safety Manager with Thiess John Holland in Melbourne Australia. I have extensive rail, mining and construction experience and have been involved in these industries for over 15 years. I have international experience, working with the Taiwan High speed rail project.

Tendering & Estimation, Proposals Preparation, Contracts Engineer

I am a experienced mining engineer having experience in drilling & blasting

I am a Quality Health and Safety Management Consultant with more than 16 years experience in Middle East . I am a Lead Auditor for ISO9001:2000; ISO14001:2004 and OHSAS18001:2007. Apart from this I am NEBOSH-UK Certified HSE Advisor . Has rich exerience in evaluating Management systems

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Highly Skilled Civil Engineer

Senior management professional with extensive experience in Management & Operations of IT & Telecom Networked Infrastructure and Systems, Managed Services, Information Security, Process Modeling, SAP Implementation, Consultancy etc across industry segments.

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

Multi-skilled engineer

HSE/Safety construction professional in the oil and gas sector-15+ years experience with major clients on construction of LNG, pipelines, GPP, marine, jetties, tanks, buildings, fabrication shops, shipyards.

More than 10 years of post graduate experience in project, safety, inspection, designing engineering & management in the oil & gas industries. Skilled in offshore, onshore & land engineerin. Proficient in excel, MS word, Premavere, introduction to AutoCAD. B.Eng in mechanical engineering.

HR Professional

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out