Resume - Rigging Superintendent

Misco Jobs

Resume #73746

CONTACT INFORMATION:
View contact information...

Fluor Daniel, Nizhnekamsk, Russia 02/08-present
Rigging Superintendent
Nizhnekamsk Refinery & Petrochemical Complex, TANECO

The 5 billion dollar grassroots complex incorporates a refinery with capacity of 7 million metric tons of crude oil a year, a deep conversion refining plant with annual throughput of 3.5 million tons and a petrochemical plant for production of products based on aromatic hydrocarbons.

* Responsible for project crane usage planning and developing work scope for potential heavy lift/haul contractors.
* Responsible for rigging/hauling lift plans and crane assignments up to 1400 tons.
* Responsible for erection of internal/external structural process equipment, pipe racks, tanks, and buildings.
* Oversight of piling installation for the entire facility including pipe racks, process buildings, and tank storage.

TriVis Inc, Birmingham, AL 01/07–02/08
Superintendent
Various Nuclear Plants, TVA, FPL, PG&E, & Entergy

Removal of nuclear fuel from the plant's spent fuel pool to increase spent fuel storage capacity and add life to the plant.

* Plan and supervise special nuclear material lifts.
* Oversee all aspects of various pool to pad projects.
* Ensure compliance with plant procedures and regulations.
* Coordinate schedule with venders, contractors, and client personnel.
* Develop technical procedures for Holtec, Trans Nuclear, and NAC technologies.
Fluor Daniel, Sakhalin Island, Russia 06/05-12/06
Rigging Superintendent
Sakhalin-1 EPC-1 Onshore Processing Facility, ExxonMobil

Onshore Grass-roots Oil and Gas processing facility rated at 250,000 BpD and 800 MSCD. Facility included two Frame 6 Gas-Turbine Generators, two Frame 5 Gas-turbine Injection Compressors, Crude Oil Separation and Stabilization, Vapor Recovery Compressors and Scrubbers as well as all utility and support systems. Remote island / artic / frontier location required large, 1500 TN modular design execution along with a significant stick-built portion, construction and operation of a 2,800 bed camp and all infrastructure / support facilities. The construction team received and installed over 45,000 tons of modules and field executed 17MM man-hours of on-site construction over a two year period meeting or exceeding ExxonMobil's safety, schedule and cost expectations.

* Responsible for rigging lift plans and crane assignments. Duties include training Russian and Turkish employees proper techniques related to the safe operation of cranes and rigging. Cranes to include Manitowoc 888, 999 and Grove 60 to 90 ton RT's.
* Responsible for erection of internal/external structural steel, cladding, roofing, overhead doors, and HVAC systems for a Crude Pump house, Diesel Methanol Building, and a TEG gas-drying building. This includes setting all internal equipment within these structures.
* Oversight of piling installation for the entire facility including pipe racks, process modules, and tank storage.
* Oversight of daily/weekly equipment needs to support mechanical, electrical, and civil contractors throughout the execution of the project. This includes cranes, earthmovers, manlifts, material handling, and hauling as well as all ancillary equipment.
* Oversight of insulation application on piping and equipment.
* Oversight of painting and fireproofing applications throughout the site.
Sonic Systems Int. Inc., Wiscasset, ME 02/03-05/05
Heavy Lift Supervisor
Maine Yankee Decommissioning Project/Various Nuclear Outages

Decommissioning of a 900 megawatt Pressurized Water Reactor that safely generated about 119 billion kilowatt-hours of electricity from 1972 through 1996. Maine Yankee was one of the first large commercial power reactors to complete decommissioning. Maine Yankee completed the decommissioning safely and within budget. The site was cleaned radiologically to a level significantly more stringent than required by U.S. Nuclear Regulatory Commission regulations. Zero lost time injuries in over three years; Completed decommissioning with less than half the NRC's radiological dose limit; Radiological cleanup of the site to a level significantly lower than the 10 millirem target; First ever use of explosives to safely demolish a containment building; Approximately 400 million pounds of waste safely removed from the site by rail, truck and barge; Largest single campaign to move spent nuclear fuel from wet to dry storage.

* Responsible for crew briefing and delegation of assignments for all critical lifts done over the reactor core.
* Responsible for Nuclear and personnel safety during reactor core offloads, shuffles, and reloads.
* Reactor Core Technician specializing in fuel handling, fuel transfer, underwater long-handled tools, under water camera handling, and nuclear fuel integrity inspection.
* Dry Cask Technician qualified in all aspects of storing spent nuclear fuel including: fuel loading, canister transfers, vacuum drying, forced air cooling, heavy hauling, and loading/unloading of 200ton concrete casks.
* Oversee all heavy haul operations while transferring nuclear fuel to the ISFSI.
Fluor Daniel, Aliso Viejo, CA 03/02-02/03
EPRI Certified Crane Operator, Rigger
North Anna Reactor Head Replacement, Surry and VC Summer Refuel Projects

Unscheduled emergency replacement of the Reactor Pressure Vessel Head at North Anna due to 49 of the 59 nozzles having cracks. The replacement of the North Anna, Unit 2, RPVH, represented the first time a major reactor component fabricated pursuant to the French RCC-M Code was used in a commercial U.S. PWR. The project included cutting a hole into the side of the containment wall and building a platform and trolley system to accommodate the RPVH weight.

* Operated containment polar crane during critical RPVH lifts and internal lifts. Supported other crafts with various cranes on the outside of containment.
* Certified rigger with knowledge of proper heavy and light duty rigging methods.
The Steam Generating Team LTD, Calvert Cliffs, MD 01/02-03/02
Crane Operator
Calvert Cliffs Steam Generator Replacement Project

Unit 2 steam generator replacements and refueling outage complete in 66 days, 32 days ahead of schedule, placing the plant near a world record for steam generator replacement.

* Operate a 200ton Demag during fitting of new steam generators.
* Operate a 50ton Demag city crane in support of the outside of the containment building.
Fluor Daniel, Aliso Viejo, CA 10/01-01/02
EPRI Certified Crane Operator, Rigger
Taft Cogen Project, North Anna, Comanche Peak, and Surry nuclear power plants

* Operate various cranes in support of construction activities.
Becon, Raleigh, NC 08/01-10/01
Certified Crane Operator
Sharon Harris Steam Generator Replacement Project

* Operate 300ton jacking system while mounted to a 500ton overhead crane.
Cianbro, Union Bridge, MD 04/01-08/01
Crane/Rigging General Foreman
Lehigh Portland Cement Project
2002 Build America Award. Construction of America's most modern cement plant featuring this continent's highest-capacity 630ton kiln, including a 475-ft preheater tower. Safely constructed one of the most rapidly built cement plants of its size in the world. One of the many construction challenges involved the placement of a single-piece, raw mill grinding table weighing over 140 metric tons and installed with thousandth-of-an-inch precision.

* Responsible for all daily/weekly equipment needs to support all crafts and phases of construction.
* Responsible for a 700 ton Liebherr with super lift kit. Manitowoc's: 4100 in ringer, 4100 with tower attachment, 4000, 3900, and a 250 epic. Four Grove 65t RT's. Six telescoping forklifts. Numerous generators, a mechanic, and a fuel truck.
* 1750 pieces of ancillary equipment.
Steel City, Mobile, AL 04/00-03/01
1997
1997 01/99-03/00
Crane/Equipment Operator, Rigger
Various Paper Mills and Refineries

* Learned the bull rigging trade while working in several paper mills.
* Became certified as a small crane operator.
EnviroSource, Clanton, AL 1994-1999
Equipment Operator
Chilton County Landfill Sub Title D Expansion

* Operated excavators and front end loaders.
Scaffold Training Institute Competent Person 2007
Hanford Advanced Rigging Course, Hanford Nuclear Site, WA 2005
EPRI Crane Course, Comanche Peak, TX 2001
EPRI Rigging Course, Comanche Peak, TX 2001
AMEDD Center and School, San Antonio, TX
Emergency Medical Technician, NREMT-B
Wallace State Community College, Clanton, AL
Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 1637)

Go to Search Parameters...

Brief Description

A higly qualified technocrat having more than 33 years of experiance inoperations, projects, and marketing.

Shipyard Coatings Program Manager

I am a Mechanical Engineer graduated from the University of Bangalore who passed out during September 2000. I got more than six years of professional post qualification experience in the Mechanical Engineering field. As a young budding Engineer, I am very much eager to join your Esteemed Organizatio

Chemical Engineer and experienced Engineering Facility Manager with strong project management skills and over 15 years experience in a highly regulated industry

Sales Planning & Execution, Sales Budgeting & forecasting, Senior level Negotiation, New Product introduction, Team building & Organizational leadership

Projectmanager process watertreatment wastewater water biofuels bio fuels plantengineering plant engineering engineer claimmanagement commissioning basicengineering, detailengineering sitemanager tendering scheduling calculation

Experience includes government procurement, commercial and R&Dcontracts, environmental, international (primarily renewable energy projects in the Middle East), limited intellectual property activities, and varied management and staff functions. Will relocate worldwide on a single status basis.

Over 22 years experience with sour oil & gas processing, acid gas injection, and heavy oil production facilities, on and off-shore. Over twelve years managing various technical support, trades and operations staff. Over nine years of overseas/foreign experience.

I currently hold over 18 years of government contracting experience including purchasing commodities, service contracts, repair, maintenance agreements and construction contracts via oral solicitation, request for bid (overseas), sealed bidding, and negotiated agreements.

Over 12 years experience of materials management in one of the largest oil fields of the World (Tengiz, Kazakhstan). I am looking for a Materials Coordinator, Materials Controller, Warehouse Supervisor or any other materials or logistics related job preferably in oil and gas industry.

Degrees in Electronics and Instrumentation.Highly detail oriented, and organized. Good planner, a self-starter with ability to meet deadlines, and personable. International experience in & gas and other industries.

Senior Planning Engineer, > 15 years experience in upstream oil&gas projects, construction.

15 years of experience in design, technical assistance and consultancy for railways, highways, motorways, bridges, metallic structures, consolidation of slopes, arrangement of platforms. Experience in setting out, cost estimates and materials engineer.

Construction Manager/ Plant Maintenace Manager

Over 34 Years of experience in NDE Field.

Experience of about seven to eight years of Managerial post and having responsibilities of monitoring of project in all aspects.

I hold a Master Degree in Civil Eng. – Canadian Equivalent and possess 17 years of professional experience in Project/Construction Managt, Design and Manfg of Structural Steel and Pre-Eng. Buildings. Regstd PE in Canada on August 05.

Legal and Commercial Consultant specialising in Project and Contract Management. Specialist in O&G, Environmental, Engineering and Utilities

An experience individual with excellent knowledge of Freight handling / Exports Management with the objective of achieving organizational goals and making it a strong profit center, seeks an opportunity in managerial capacity.

Business Management professional - travel, tourism, travel e-commerce and travel process outsourcing

cable management, electrical construction supervision, electrical assistance

Please refer. my Resume below

Electrical Engineer with over 21 years' varied experience in Projects- contracts, engineering, construction, project management with EPC-MNC, Large Process/Chemical and Electricity Utility companies

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

Rigging Superintendent

Site Manager, Construction Supervisor and Crane AP.

Instrument/electrical eng. , electrical engineering, present position instrument section head, broad expert in instrument, chemical and mining industry experience, hig do to say ratio

To offer a background 0f 15 years experience in EPC & Commissioning including 4 years in construction management and 4 years in project engineering & 7 years in field of construction projects with proven strength in inspiring the confidence and trust of Owners & others of Petrochemicals projects/ref

Conduct daily inspection of buildings and work areas,conduct a toolbox meeting,report all incident and accident,making jha,and teach the workers to wear always their ppe

15 years of broad based management experience in diverse development projects. Experienced in planning, execution, monitoring, training, consultative, information dissemination, research analytical and evaluative services in project implementation. Recognized as a gutsy, hardworking and dependable t

Professional contract negotiator & administrator

Project Engineer - Electrical Electrical Engineer with (15) years of experience in multi national projects in India (4 years) and Middle East Power projects (11years) Construction and Project Management field especially in High Voltage Substations and Power Station environment

Senior Manager with 30 years of proven strong management skills in problem solving management.

Senior Accountant, Chief Accountant

Proposal and Project Management

Project management,QA/QC,Construction,Maintenance

23 years in safety field in Petroleum Refineries, Petrochemical Plants, Pipeline Projects, Well Services, Wireline Operations, and Wastewater Treatment. 8 years with Safety Instructor tasks, 7 years in Construction Projects, 5 years with Q/A Q/C tasks, and 7 years in Managerial level

Graduate/Mechanical Engineer-Working in Project Engg., & Management for Oil, Gas & Petrochemical

Project Manager Deepwater, Regulatory Compliance

Senior electrical engineer with experience in oil and gas , power generation and industrial projects

Greater than twenty five years of experience in power & Oil & Gas projects. Fully experienced in preparation, implementation of QA system & auditing of inspection procedure & personnel. Experience includes writing, monitoring, instructing, witnessing & approving Quality Procedures, Welding Procedure

QA/QC Engineer

Msc Quality & prodt. Mgr 16 Yease Experiance

Environment, Health & Safety Manager in a Manufacturing and Software Research & Development facilities with 6+ years of exp.

Senior Program, Project, and Construction Management Engineer

Management and Supervision Material Cordinator- control, expeditor

Project Management - Oil & Gas; Plant Equipment Maintenance.

Quality Assurance, Quality Control, Inspector, Sr. Inspector, Sr. Surveyor, QA/QC Inspection Engineer– Supply / Construction, Quality Coordinator / Administrator, Procurement Quality Inspection Services Manager / Coordinator, Expeditor, Lead Mechanical Engineer.

BE-Mba graduate with good academic records

Stanford MBA, BSc, (Mechanical Engineering); Seasoned Oil & Gas professional with 14-years international leadership experience in engineering, project management, procurement and contracting, and commercial activities

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out