Resume - diploma in mechanical engineering

Misco Jobs

Resume #83017

CONTACT INFORMATION:
View contact information...

Date of Birth: 02 July 1979

POST APPLY FOR RIGGING & HEAVY LIFTING SUPERVISOR

EDUCATION

Graduate, diploma in (mechanical Engineering), 1997
Sathak engineering college, by reorganizing government of India.
Rigging lifting course certification. (Qatar government approval)

SUMMARY OF QUALIFICATION

* Over 12 years experience in positions including rigging heavy lift precast structural and mechanical engineer, project rigging supervisor, mechanical & flare, cooling tower, tanks, civil/building & lifting inspector.

* Well verse on International Standards (Saudi aramco, tuvsud, abs, Qatar petroleum, bureau veritas (BV) approved govt certification.BLS basic life support/CPR from hammed international corporation –Qatar

* Train the trainer for KBR @ PGTL safe fundamental-KBR @ JGC PGTL-light driving & Rigging licence,client and project QSGTL/ PEARL GTL project EPCM GTL lifting champion rigging course certificate.

* Consistently noted by past and present associates and staff for attention to detail, superior job performance, leadership by example, ability to prioritize multiple projects, dedication to quality, and timely completion of all projects and ability to handle all site mechanical and civil & vessels, unit and structural precast erection works, from execution to hand-over phase.

* Computer literate. Advance technical knowledge critical lifting plan method statement in ms office.

PROFESSIONAL EXPERIENCE

January 2007 to present: JGC –Kellogg brown and Root (KBR) Joint venture
Qatar Petroleum & EPCM with Descon Engineering
In Pearl shell GTL Project Qatar.

Position: RIGGING SUPERINTENDENT
(Cooling Tower, Precast, Flare, Tanks, Pipings vessels)

RESPONSIBILITY

* Conducting Tool box for all Lifting activity TSTI (TOTAL SAFETY TASK INSTRUCTION for all activity, using standard lifting gears the organization and control of the lifting operations assessment of the lifting operation to provide such planning selection of cranes, lifting gear and equipment, instruction and supervision as is necessary for the task to be undertaken safely.

* ensure that accurate weight, radius, heights etc. Are established ensuring that the ground is made suitable for taking up the Load to be imposed.

* Ensuring that suitable assess is provided to the site and any area required for erection and dismantling the crane all hazards such a services (gas water electricity, etc) Above or below ground are identified and suitable precautions are taken. Handling all the equipment with my self and distribute hand over area wise with department supervisor.

* Ensuring that adequate inspection and maintenance of the equipment has carried out ensuring that there is an effective procedure for reporting defects and incidents and taking any necessary corrective action ensuring that both the riggers and crane operators are familiar with the method of signaling to be used Participate walk down with client and records rigging activity operations punch list item.

Sept 2004 to 2006: Saudi aramco-JGC-shamprogetti S.P.A with consolidated contractor company
(Hawiyah NGL GAS liquids plant)

Position: RIGGING SUPERVISOR
(Piping –structurals and equipment erection)

RESPONSIBILITY

* Maintaining standard lifting gear conducting tool box talk for the crew is crane set up properly and barricades in place, what is the weight of the Load, is it documented or estimated.

* Safely lift the load correct lifting gear chosen, if the lift requires a written lift plan is it on the crane and filled out correctly. Are the operator and rigger flagman qualified. Is the crane inspection all the rigging gear inspected and color coded. what is the current wind speed. Is it less than the crane manufacturers limit for safe operation.

Supervision the cranes boom, accessories, maintaining the log for each crenes, ensuring erection of barriers and safety sign board in respect to lifting areas. Attending company internal walk thru.

* Coordinating with ccc internal safety representatives for the better improved rigging on the project.

February 2000 to 3 June 2004: Oman –India fertilizer plant sour-muscat bawan construction

Position: SUPERVISOR, RIGGING HEAVY LIFT
(Piping, conveyor, exhaust, turbine, precast elements)
RESPONSIBILITY

* inspect/monitor and test records shall lifting gears provide evidence that the rigging activities have been performed in accordance with the requirements and indicate, all identified non-conformances together with any resulting cranes repair lifting activity implemented and enforced work schedule, rigging completing tasks on time or earlier.

* Wear correct personal protective equipment worn understand the basic requirement of a lifting plan have the ability to select the correctly rated, lifting equipment from a lifting plan.pre-operational functional checks on the lifting equipment to be used. Ascertain or accurately assess the weight of the load, to be lifted. also center of gravity of the load to be lifted.

* Have the ability identify the lifting points of lifting lugs on equipments to be lifted. Understand that the gross load on a crane boom includes hook block, auxiliary jib weight of rigging etc.as well as the actively weight of the load.

Dec 1997 to 31 June 2000: marine engineering & project unit. Saudi Aramco oil refinery
Offshore & onshore project.

Position: RIGGING SUPERVISOR

RESPONSIBILITY

* assembling mobile cranes deck boat repairing loading offloading engines parts, accessories, Tanks steel plates installations shaft propellers thrust, install heat exchanger, stone blocks cooling tower structure, turbine, heavy duty engines, erections of equipments installations heavy lifting materials etc.

* supervised and successfully completing all projects on time and under budget. examine the tackle for defects, after the job before being stored,maintain,a good standard of housekeeping in the rigging location&areas.the organization and control of the lifting operation provide such planning selection of cranes lifting gear and equipment, instruction and supervision as is necessary for the task to be undertaken safely.

* with crane winch 50 ton to up to 2800 with ringer tonnage crane, mobile crane,crawler,truck mounted, tower crane,erection fields, drilling offshore,vessels,piping,oil&gas,refinery,pump,heavy transformers,motors,compressor,machinery,all kinds of engines, mobile crane 120 ton to 1800 tonnage assembly and dismantled etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 1811)

Go to Search Parameters...

Brief Description

Mechanical & electrical hands on & design

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Looking for senior level assignments in Project Management & Business Development, Health & Safety Management, Human Resources, Learning & Development and Business Startup.

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Business Administrator with MBA from Oxford, UK

MWD, drilling, construction

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

Experienced Project Controls Specialist in engineering and construction industry. Skilled in project cost, scheduling, analysis and forecasting .

analyst

Skills summary: Gas and Oil Separation Plant (GOSP), Produced Water Treatment Plants, Installation of diesel Engine Power plants, Mechanical construction works such as Piping, tanks, Ducting, structurals, etc.

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

15 plus years experience in tool and equipment management, warehousing, materials management. Dependable, reliable and honest. Looking for long term employment.

P&PCM, MBA, B.Arch

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

Diploma in fire and safety, GOOD ALROUNDER IN HSE FEILD

Currently working as the Service Manager for the CAT dealer in Papua New Guinea, Tabubil branch. There are 56 employees in the service department and the branch takes care of up to 40% of HD PNG earnings.

Sr operations Manager

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

7 years engineering and management experience in the oil and gas industry. PMP certified with extensive civil engineering experience.

SAP FICO consultant with 10 years experience

Graduated in the field of Mechanical Engineering and presently working with one of ADNOC Group of companies as a Maintenance Planner / Scheduler (Mechanical). Have been associated with Oil & Gas sector for more than 4 years. Work experience on CMMS and Primavera skills.

To maintain high levels of on-site safety awareness through the delivery of effective educational & training programmes, To provide a comprehensive on-site HSE administrative support system,To help maintain effective working relTo plan, establish & implement, BS: OHSAS 18001:2007 & ISO 14001 audits.

A senior cost & controls engineer with extensive experience and a professional qualification in Mechanical Engineering coupled with a strong background in project management,project controls, contracts administration,variation orders &claims management.International experience in large EPIC projects

Seeking Chemist or Laboratory Technician Position-will relocate

I am an extremely well organized, tedious, and hard working individual. I am well versed in directional drilling and, knowledgable in all aspects of the drilling industry. I am

Passed Bachelor of Engineering in 2002 and then completed my MBA. I am working as a senior design engineer in Instrumentation & automation field of Larsen & Toubro Limited organisation.

Plant operations supervisor / trainer, remote overseas locations

A hands on Mechanical Supervisor/ Team Leader, with managerial and technical experience, specialising in Rotating Equipment. A total of 20 years spent working for Dresser Rand in the energy conversion business. Additionally, considerable experience in training all levels of the workforce and mgmt.

25 yrs Heavy diesel mechanic in Construction and Pipeline

Manage systems, hardware software, connectivity link, Manage Active Directory,Manage DHCP Serverý

diploma in mechanical engineering

Health, Safety, Environment

Finance*Strategy*Management*Sales*Contracts*Financial Services*International/Global Trade

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Piping engineer, pipeline engineer, corrosion engineer, mechanical engineer, project engineer, construction engineer

Professional experience in Document Control, Project Cost Reporting, Materials Control, Logistics, Administration, NDT Supervision, NDT reporting, QA/QC etc. with Oil & Gas and Marine (Onshore & Offshore).

I am a graduate mechanical engineer with close to 16 years experience in the engineering, maintenance, and project engineering fields; large power stations and also in the oil & gas field. Extensive Maximo computorised maintenance management system (CMMS) experience and worked on SAP for 3 years.

Master of Science in Mechanical Engineering Zone and Energy Manager, Facilities Maintenance Manager

Project Management / Lean Training / PFMEA (Process failure modes and effects analysis) / PCP (Process Control Plan) / PFD (Process Flow Diagrams) / Lean Manufacturing / 5S / Value Stream Mapping / Visual Management

HVAC, Maintance

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

Iinterested and would like to have an opportunity to work with your company, as Account Executive. I believe there would be a good fit between my skills and interests and your needs.

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

Experienced Automation/Process Control Engineer

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out