Resume - Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

Misco Jobs

Resume #10733

CONTACT INFORMATION:
View contact information...

JOB OBJECTIVE
Senior level assignments in overall management of Control & Instrumentation Projects.

SUMMARY OF SKILLS & EXPERIENCE
* Over 20 years of rich experience in Project Management for turnkey projects dealing with design, engineering, execution and maintenance of DCS and PLC based controls & instruments in India & abroad.
* Expertise in DCS point definition and configuration, I/O channel assignment, interconnect wiring design, graphic display configuration, programming, factory acceptance test, commissioning and system verification and site acceptance test.
* Extensive experience in end to end execution of projects viz., Gas Sweetening, Sulphor Recover, L.P.G. Gas Compressors, DCS & PLC based instrumentation, SCADA Systems and other Field Instrumentation Projects.
* Exposure to implementation of Total Productive Maintenance practices and ISO 9002, QS 9000 quality standards.
* M.E. (Elx.& C) from University of Rourkee.

SPECIALIST IN FOLLOWING SYSTEM:
1. Honey Well DCS Tdc-3000
2. Yokogawa DCD System
3. Bailey Network-90 System (DCS&Pl C)
4. Allen Bradley PLC System
5. Yaskawa PLC System (Shutdown Control And Instrumentation
6. Microvax-3400 System
7. S3 Software Texas Instrument System.
8. Micromotion Flow Measurement System.
9. Design & Engineering (Preparation of Specifications, Data Sheets, Equipment Sizing And Selection, Bid Evaluation And Inspection, Installation And Commissioning Support Of Control And Instrumentation System.
10. Fisher Rosemount System (DCS & Field Instruments)
11. Specialist in Solar Gas Turbines, Ruston Gas Turbines, GE Gas Turbine, Siemens Steam Turbine, American Shack Boilers, Hitachi Boilers, Cogeneration Plants.
12. Offshore Oil & Gas Equipments in Production Platform.
13. SCADA System.
14. DCS-ABB-BAILEX – Symphony.
15.IQ-Actuators, ENRAF Level Transmitter, DELTAV-DCS

ORGANISATIONAL EXPERIENCE
Since July 2004 Pertrofac Instrumentation Supd.
AGT CROSS COUNTRY PIPELINE PROJECT

April 2001to July 2004
Sudelettra Nigeria LTD., Nigeria Sr. Project Manager
Port Harcourt (Oil & Gas Project)

March 2000 to March 2001 Hyundai Con.&Engg.Co.Ltd. Dubai
I&C Engineer (DCS)

Dec' 1996 to Oct'1999 Alexandria Carbon Black Alexandria, Egypt Manager

May 1981 to Dec'1996 Oil & Natural Gas Corporation (India) Superintending
Engineer

March 1980 to May 1981 Dept of Electronics, Govt. of India, JSO

KEY RESPONSIBILITY HANDLED DURING VARIOUS ASSIGNMENTS

PROJECT MANAGEMENT
- End to end execution of the project dealing designing, engineering, installation and commissioning of DCS and PLC based controls and instruments.
- Effective planning & scheduling to ensure execution of projects within time & budgetary parameters.
- Implementing Total Productivity Maintenance Tools and ISO 9002, QS 9000 quality standards.

MAINTENANCE
- Responsible for effective maintenance of electrical systems to ensure smooth operations.
- Planning & effecting preventive & corrective maintenance schedule for enhancing system reliability and minimising the system/ equipment down time.

PROCUREMENT/ VENDOR DEVELOPMENT
- Designing, implementing and monitoring effective procurement schedules along with finalising the technical specifications of the materials/equipment/machinery.
- Identifying and developing quality vendor sources for achieving cost effective purchases and reduction in delivery time.

QUALITY ASSURANCE
- Adapting and implementing measures for maintaining and meeting the quality standards and specifications.
- Ensuring adherence to quality standards for all the incoming equipment/ system.
- Review the operational practices, identify the areas of obstruction/ quality failures and advise on system and process changes for qualitative improvement.

Major Projects Handled
AGT PIPELINE PROJECT-PUMPING STATION
1. Construction and Commissioning of ICSS SYSTEM(ABB),MOL Pumps.
2.. Construction and Commissioning of C.TU. PLANT

At Port Harcourt, Nigeria
* Successfully executed the following DCS & PLC based instrumentation projects viz.,
- I.Q.Actuators
- Enraf Level Transmitters
- Deltav DCS
- Paging System
- Field Instruments-Smart Transmitters

At Hyundai Con. & Engg. Co. Ltd. Dubai
- Refurbishment design, engineering, installation and commissioning of DCS system for replacement of existing Siemens Control System of system turbine and boiler.
- Design, engineering, installation and commissioning of DCS system for 3 gas turbine (total-400mw capacity) and 3 WHRB (waste heat recovery boiler)
- Harmony-Harmony Control Units, Harmony Rack Controllers, Harmony Rack I/O.
- Human System Interfaces-Conductor Nt, Operation Net, Ethernet Switches, Network Interface Cards.
- System Engineering Tools-Composer.

At Alexandria Carbon Black Alexandria, Egypt
* Design, engineering, installation and commissioning of TDC-3000 Honeywell DCS System
* Installation and commissioning of process instrumentation i.e. Mass Flow Meter-Micromotion, Smart Transmitters-Fisher Rosemount, Smart Positioner-Fisher Posemount.
- Handled effective maintenance of
- DCS-Deltav (Fisher-Rosemount), Foundation Fieldbus and Advanced Process Control Loops.
- Control System of Boilers and Steam Turbine (Boiler-American Shack, Turbine-Siemens)

At Offshore Platform, Bombay (ONGC)
* Successfully handled commissioning & maintenance of
- Central Control Panel and associated process instrumentation used for oil & gas processing. (Controllers, Transmitters, Control Valves, Turbine Meters).
- En-Tronic Control of Process Gas Compressor (Gas Generator-Rolls Royce, Power Turbine-Cooper Bessmer, Compressor-Kawasaki)
- Instrumentation System of Centrifugal Pumps Driven by Gas Turbine. (Vibration System and Temperature System Monitoring)
- Control and Instruments of Gas Turbines used for electric power generation.
- Fire and gas Detection System using PLC (Series 3 General Electric)
- Ensured effective preventive & corrective maintenance of Pneumatic Control Panel, Hydraulic System, Electronic Controller, Vibration & Temperature Monitoring Systems, Pdp-11/34 Computer, Rosemont Transmitters, Control Valves, Daniel Turbine Meter, Rosemount Transmitters, Control Valves, Turbine Meters Electronic Exchange and Telemetry System.

At Hazira Gas Processing Complex, (ONGC)
* Commissioning and maintenance of
- GSU, CFY, DPD, SRU plants and its associated field instruments.
- Yokogawa Distributed Digital Control System (DCS), Centum and PLC.
- Distributed Digital Control (DCS), Bailey Network 90.
- PCU, OIU, Modification Configuration, Graphics and Plant Communication Loop.
- Successfully maintained Gas Sweetening Phase I & II instruments viz., Gas Detector-Rexnord, Pressure Swich-Cella, Control Valves-Valtak, Tuflin, Yarway Solenoid Valves-Versa, Annubar-Desterich, Butterfly Control Valves-Fisher Level Gauge-Klinger, Shutdown Valves-Mapegaz, Transmitter-Rosemount. Rotark Actuator-Etex, Control V/V Kent Process, Pneu Op. V/V-Walton Weir Pacific, Regulator-Fisher/CCI-Control, Electronic Transmitter-Bailey Control, Pressure Switch-Sor, Pressure Gauge-Dressure Industries, Diff. Pressure Gauge-Vossler Co., Thermocouple-AWC, Temp. Switch-Sor Flow Element-Superior, Annubar-Dieterich Standard, Tank Level Gauge Varec, Level TX-Fisher/CSI-Control, Level Sw-Magnetic Sensing Waves and H2S Analyser-Measurementation.

At Nazira (Assam) (ONGC)
* Commissioning and maintenance of the following Instrumentation Projects
- Distributed Digital Control Systems - DCS LAKWA IX and DCS DML-I
- Inst. System WIP-III & WIP-IV
- Inst. System Gas Grid Compressors-Project RDS
- Inst. System Gas Lift Compressors-Project-RDS
- Inst. System Gas Lift Compressor Project-GLK
- SCADA System
- PLC System
- TDMA System Communication Concentrator Model
- Microvax 3-400 System S3 Texas Inst. Software Systems.
- Tank Level Transmitters-Metritape/Enraf inall. GGS at ONGC ASAM.
- Instruments of new GGS: P.G-H Guru, Transmitter-Rosemount, Level TX-V AUTOMAT, Control Valve-Masoneilan, Safety Valve-Audco, and Level SW-V Automat. Pressure SW-Switzer, DCS-Yokogawa and PLC-Allen Bradely.

At Baroda (ONGC)
* Successfully completed Instrument & Scada Systems

TRAINING
* Have attended the following training programs -
- One month in Houston (U.S.A.) for control & instrumentation of Turbo Generator System.
- One month in Yokigawa, DCS System.
- 14 days in Ohio U.S.A. on Bailey Control Network – 90 (DCS)
- One week in Egypt Honeywell DCS TDC-3000 system.

EDUCATIONAL QUALIFICATIONS
* M.E. (Elx.& C) from University of Rourkee in 1981.
* B.E. (Electronics ) from M.M.M. Engineering. College, Gorakhpur in 1978. (84.3%, II nd Rank.)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 2856)

Go to Search Parameters...

Brief Description

DCS APPLICATION ENGINEER WITH 4 YEARS EXPERIENCE

Presently Working with Samsung Engineering in Seoul Head Office as Lead Project Controls Since Nov 04 Trend/TIC program Implementation Contracts Management & Control

QUALIFICATIONS SUMMARY: Eleven years experience in Generator mechanical, electrical troubleshooting, and repair. Six years experience as quality control inspector for the United States Navy. I have experience with all types of generators from 2k to 635k both civil and military. I can read all s

Architect and Interior Designer

Over six years of extensive experience in Planning of a large Infrastructure & Commercial Development Project

HVAC Engineer,Project Engineer,Mechanical Engineer,Commissioning

BE (Electrical) with 7 Years Experience in the Field of Purchase, Contracts, Planning & Cost Control, Budget, Cash Flow, Project Reports & General Management

Quality Assurance, Quality Control, Construction, Project, ISO 9001, System Development, Implement, Audit, Corrective & preventive actions, Continuous improvement, Oil & Gas, power & petrochemical industries

Area of expertise is ranging from Preliminary and Details Design, Construction

Over 15 years exp in construction company as Technical office Engineer, Document controller, Quantity Surveyor etc

A well experienced senior level QA/QC Engineer, Welding/Coating inspector

Five years experiance in this civil engineering .

currently located in Milan, Italy. I have all documents to work here in Italy. I am looking for job related to CAD, MICROSTATION, FRAMEWORKS. I have good experience in CIVIL RCC, STEEL, Underground drafting & detailing. I have good experience in 3D Modelling using PDS, FRAMEWORKS.

Possess ten (10) years of experience in design of various civil engineering facilities providing shelter and access to fellow humans in Pakistan, Yemen and Oman.

Planning Engineer/ cost controller using Primavera P3 Construction Experience as Project engineer

Project, Construction Management, Contract Administration, Supervision & Site Control, Quantity Surveying (QS), Cost Estimation, Site/store co-ordination & Control, Project Planning, monitoring & review of progress, Site Survey & estimation of quantities.

Seeking a continually challenging career in Civil Design

i have more than 6 years experience in geotechnical engineer

pipeline engineer / process engineer

having experience in oil, gas refinery and petrochemical as insulation and painting engineer

OBJECTIVE: A position as Mechanical Engineer (Basic/Principle Design, Estimation, Tendering & Procurement)

Exposure the actual horizontal and vertical constructions and marine construction such as roads, drainage and sewerage systems, buildings, foundations, elevated structures for the equipment, breakwater, Jetty, and shore protection.

Concrete batching plant supervisor, wh can handle batching plant... etc. know to design concrete very well.

Construction & oil and gas & auditing

Results-driven Civil Construction Management Professional with extensive senior-level experience in the Supervision, Quality management, planning & programming, design and successful completion of large-scale civil and structural engineering projects worldwide.

Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3

Experienced in construction / pre- commissioning/ commissioning capacity both onshore and offshore since 2003 and been involved in a number of various major projects within a wide range of the engineering industry. I regard myself as a hardworking reliable person who is capable of working under pres

I have been involved in the Construction Industry for the past Six Years in the Field of Highways Construction as a Quality Control Engineer. During this period I have worked with various contractors on highways projects and at presently working with consultant involved in Dubai Metro Project. I am

Project Management

Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

Professionally qualified and highly experienced mechanical engineer offering 25 years experience in managing electro-mechanical projects and operations & maintenance of real estate properties.

QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.

Distribution substations installation & commissioning,operations & maintenance of all substation equipments

Electrical, Instrumentation and Control Disciplines

Being in the field of engineering for more than 5 years, experienced in various jobs like HVAC systems, MEP, Air pollution Control Systems, Water Treatment Plants Fabrication & erection

Twenty-five years of experience; recently as Principal/Lead Mechanical Engineer. 5 years in middle/senior management. Specialist of rotating equipments in EPC of pumps, compressors and turbines. Oil & Gas experience includes Refinery, Upstream, Arctic modular plant, Pipeline pump & compressor

i'm chemical engineer working presently with TOYO ENGG. INDIA LTD. attached pls. find my resume.

Planning engineer

Well versed in Autocad, 3D StudioMax, Photoshop and freehand drawing.

I am Quality Control Engineer with Seventeen years experience in Oil&Gas and Power sectors.

piping engineer , pipeline engineer , mechanical engineer, construction manager

Planning Engineer with more than 5 years local and international experience in the field of mechanical / planner engineering from construction of Industrial, Building and Domestic Residential onshore project acquired extensively with past position handled on the above qualification.

Has an extensive experience of 4 years & 10 months in this trade of discipline from design to implementation of projects both Civil and MEP Works, wide scope of planning, quantity surveying, estimating, cost engineering, cost controlling and project management skills.

Experience CNC Maintenance engineer including installation and troubleshooting. Familiar with Fanuc and Mitsubishi CNC control

A motivated, dedicated and technical expert in mechnical and electrical system

I am lead field engineer in Jubail 2 project, AVS with good managerial skills

Drafter

During 19 years, I have gained some practical field experiences & knowledge as a construction civil engineer/ manager which includes, projects construction supervision, project management, quality control, coordination & liaison in the project team, field survey

qualified to CSWIP 3.1 and AWS CWI, Knowledge of welding Inspection, piping and mechanical inspection.

Mechanical Cement & Power plant Projects Installation, Commissioning & Maintenance

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out