Resume - Mechanical Engineer with more than fifteen (15) years of combined experience in ...

Misco Jobs

Resume #11416

CONTACT INFORMATION:
View contact information...

QUALIFICATION
Bachelor of Science in Mechanical Engineering
Mapua Institute of Technology, Manila Philippines
Registered Mechanical Engineer, Board of Mechanical Engineers
Philippine Professional Regulation Commission

PROFESSIONAL: ASME (American Society of Mechanical Engineers)
ORGANIZATION Member - 2000 to Present

CAREER SUMMARY

Mechanical Engineer with more than fifteen (15) years of combined experience in engineering in various industries, which includes OFFSHORE/ONSHORE, LNG, Oil Sands, GAS plant, petrochemical, chemical, and other industries. Have participated in different phases of projects from Basic Engineering, FEED/Conceptualization, to Detail Engineering through construction, commissioning/start-up, and operations/maintenance. Has extensive experience in EPC and Consultancy Oil and Gas companies. Obtained and Certified in BOSIET & EBS-OPITO UK - Offshore survival training and HSE.

KEY ASPECTS

- Lead Engineering for offshore and onshore oil & gas, gas plants, LNG and petrochemicals projects FEED/Conceptualization and Detail Engineering
- HAZOP / HAZID studies, HFE (Human Factor Engineering)
- ASME Section 8 Div. 1 & 2 Vessel; TEMA, API 660/661/662 Heat Exchangers; API 650 Tanks, BS 2654 Tanks, BS 7777 Tanks, API 620 Tanks, API 560/530 Fired Heaters, ISO Fired Heaters; API 610, 674, 675, 676, 681 Pumps; ANSI/ASME Pumps; API 617, 618,619 Compressor; API 673 Fans; API 611,612, 616 Turbine; Steam Generators, Cooling Towers, AHU, Material Handling equipment.

- Technical Bid Evaluation and Sound and familiarity of oil & gas vendors in the region
- Familiarity with international standards API, ASME, BS, DIN, DEP, PTS, ANSI, ASTM, TEMA
- Review of Vendor Documents: Fabrication drawings, GA drawings, operation & maintenance manuals, procedures, data book,
Diagrams
- Preparation of Tanks (API 650/BS 2654) Fabrication drawings
- Client/Vendor liaison
- Compress Vessel, AutoCAD, Microstation, Intergraph PDS, HTRI
- Construction and erection, Start up and commissioning, Operation and Maintenance experience

PROFESSIONAL EXPERIENCE

September 2005 - December 2007
ELECTROWATT-PÖYRY ENERGY (BRUNEI) SDN. BHD
BRUNEI SHELL PETROLEUM / LNG PROJECT
Kuala Belait, Brunei
Lead/Senior Mechanical Engineer
(Rotating/Static/Package Equipment)

Working exclusively on the Engineering Services contract with Brunei Shell Petroleum Sdn. Bhd. Design Engineering Services Onshore and Offshore Facilities Including Design of New Facilities, Rejuvenation and Revamp. FEED and detailed engineering for Liquefied Natural Gas and crude oil offshore platform & onshore facilities.

As a Lead Mechanical Engineer:

Estimate man-hours. Prepares mechanical deliverables list. Attends kick-off meeting with the client and vendor. Monitor and control man-hours and progress. Reviews and approves specifications, requisitions, drawings, and technical bid evaluation. Attends progress meetings. HSE Implementation

As a Senior Mechanical Engineer:

Design vessel, storage tanks, package equipment, heat exchangers, fired heaters, utilities equipment: steam packaged boilers, AHU, cooling towers including welding procedures, non-destructive and hydrostatic testing procedures. Technical Bid evaluation and vendor document/data reviews. Reviews Control and automation systems and how that interfaces with machinery. Plant and equipment installation, commissioning and maintenance procedures. Oil and gas process design. Material selection for different process and environmental conditions. Integrity issues on static equipment. Prepares mechanical man-hour estimation norms. Prepare man-hour estimate prior to the start of project. Provides expertise to all design phases of a Work Order for rotating and static equipment. Ensures design packages meet the required safety, environment and ergonomic standards. Supports drawing office personnel with engineering input. Relates rotating equipment to piping and vessel and fabrication procedures.

Pumps, compressor and all rotating machinery design, package equipment, specifications, and selection, especially with regard to compressors (centrifugal and positive displacement), gas turbines, pumps (centrifugal and positive displacement), seal design, performance testing. Preparation of requisition for Rotating Equipment packages. Technical bid evaluation and vendor document/data reviews. Plant and equipment installation, commissioning and maintenance procedures. Piping Design and fabrication procedures.

SHELL PROJECTS INVOLVEMENT:

1. CHAMPION-07 FIREWATER UPGRADE PROJECT (Topside Offshore Platform)
2. AMPA-09 Compressed Air Detailed Design & Installation (Topside Offshore Platform)
3. LNG Underground Tank Replacement (LNG)
3. GECKO PHASE "A" PRODUCTION Project - OIL SANDS (Onshore Drilling &Wellhead Facilities)-FEED and Detail Engineering
4. SEWJ-19 Drilling & Wellhead FEED & Detailed Design & Engineering (Offshore Wellhead Facilities)
5. AMPD-15 Offshore Platform Instrument Air Compressor Replacement
6. SHELL – Seria Crude Oil Terminal Rejuvenation & Expansion Project (Tank Farm, Jetty & Crude Distillation Unit)
7. Shell Industrial Gas Plant Terminal (LNG) with Tie-in to Brunei LNG
8. Seria - Crude Oil Terminal Emulsion Treatment Plant Train 1 and Train 2 Upgrade Project (Heat Exchangers and Tube Bundle Replacement)
9. New Pipeline Inspection Workshop for OCTG at STL Muara: Design and Engineering of Booster Pumps, Submersible Effluent Pumps, Jockey Pump Package, and Diesel Engine-driven Firewater Pump Package
10. Crude Oil Terminal T-150 & T-170 Upgrade-Conceptual Design Project – Design and engineering of big centrifugal pumps with 800 m³/hr capacity
11. BLNG Boil-Off Gas Compression Expansion – Basis of Design/Conceptualization/FEED/Detail Engineering

APRIL 2005 – AUGUST 2005
SIME DARBY ENGINEERING SDN. BHD.
Kuala Lumpur, Malaysia
Lead/Senior Mechanical Engineer
(Rotating/Static/Package Equipment)

Sumandak Platform-A and Tie-ins to Existing Platforms (OFFSHORE) PETRONAS CARIGALI SDN BHD, SABAH, MALAYSIA
MECHANICAL LEAD ENGINEER for detail design. Assigned at Head Office in Kuala Lumpur

Working on PETRONAS Sumandak Offshore Platform Design project in a capacity of Mechanical lead engineer. Preparation of mechanical deliverables. Interdisciplinary review and discipline design checking. Attending client, vendor, interdisciplinary, meetings.

Design and engineering of static equipment, rotatng equipment and package equipment. Equipment design including seal design, performance testing, automation and control system for equipment. Preparation of specifications, datasheets, all attachments and requisition for rotating and static equipment packages, technical bid evaluation, and reports for offshore platform. Preparation of equipment list. Design and calculation of static equipment such as vessels, tanks, and prefabricated tanks and fabrication procedures. Prepare mechanical datasheets. Design of vessel and their fabrication procedures. Estimating engineering man-hours. Interdisciplinary review of drawings and documents such as P&ID, UFD, PFD, valves, instruments, layout, process data sheets, electrical equipment motor data sheets, instruments data sheets. Submission of piping deliverables: general arrangement equipment drawings, escape routes, MTO, PDMS modeling, pipe supports, piping plan, isometrics, piping specification, and mechanical design philosophy. Planning and schedule.

AUGUST 2003 – DECEMBER 2004
SUMATEC ENGINEERING SDN. BHD.
Kuala Lumpur, Malaysia
Lead/Senior Mechanical Engineer
(Rotating/Static/Package Equipment)

Worked in a capacity of Mechanical lead engineer. Preparation of mechanical deliverables.

Design and calculation of static equipment such as vessels, tanks, heat exchangers and prefabricated tanks and rotating equipment. Design of steam packaged boilers, AHU, cooling tower, and material handling equipment. Preparation of API 650 Tanks Fabrication drawings. Detail Calculation of API 650 Tanks and BS 2654 Tanks. API/ANSI Pumps and rotating machinery design, specifications, and selection, especially with regard to compressors (centrifugal and positive displacement), gas turbines, pumps (centrifugal and positive displacement), seal design, performance testing. Preparation of requisition for Rotating Equipment packages. Technical bid evaluation and vendor data reviews. Preparation of piping specification. Review of static equipment integrity. Prepare Requisition for Quotation package and specification for turbine, compressor and pumps including automation systems. Preparation of outline drawings and datasheets. Prepare datasheets and specification for tender and project for rotating equipment. Material selection for vessel and piping. Preparing specifications and RFQ package for static & rotating equipment. Preparing calculation templates for static & rotating equipment calculations. Review of vendor drawings and documents. Review of fabrication drawings and engineering drawings. Technical bid evaluation and vendor selection and recommendations. Preparing norms for estimating engineering man-hours. Preparing proformas for engineering deliverables.

PROJECTS INVOLVEMENT:

1. Fuel Oil Blending and Bunkering Facility at Port Tanjung Pelepas
TANJUNG PELEPAS TERMINAL SDN BHD
Johor, Malaysia
2. Implementation of Upgrading Works on Funadhoo Island
STATE TRADING ORGANIZATION PLC
Republic of Maldives
3. ABF Bintulu Revamp Project,
PETRONAS ASEAN BINTULU FERTILIZER
Sarawak, Malaysia

4. WMC Energy Project – Design and engineering of 30 MW Gas Turbine and several equipment
TENTRIK Technologies
Bukit Nanas, Seremban, Malaysia
1998 –2003
FLUOR DANIEL INC. PHILIPPINES
(FLOUR Company, GHQ in Houston, Texas, USA)
Manila, Philippines
Mechanical Engineer/Associate Design Engineer III
(Rotating/Static/Package Equipment)

Design of vessel, storage tanks and Heat exchangers including welding procedures, non-destructive and hydrostatic testing procedures. Preparation of specification for vessel and attached piping and accessories including material selection. Design of steam of steam packaged boiler, AHU, cooling tower, and API/ANSI rotating equipment including selection and its control automation control system. Prepare Requisition for Quotation package and specification for static and rotating equipment. Vendor Document Review. Prepare Mechanical Data Sheets. Prepare Hydro Test Package. Prepare engineering installation package, inspection test plan, start up procedures, and equipment data sheet. Provide engineering support to other engineering discipline. Preparation of installation equipment procedures, commissioning manual & procedures, and maintenance operation procedures. Technical Bid evaluation. Vendor recommendation. Review of vendor documents and drawing. Performance testing procedures. As-building of data sheets and mechanical equipment SAP data base. Material selection for vessels, heat exchangers, and rotating equipment construction that suits to environmental conditions. Interdisciplinary review of drawing of engineering drawings.

PROJECTS INVOLMENT:

1. TOTAL EXPLORER PROJECT-OFFSHORE FPSO, TOTAL FINA ELF
Moho-Bilondo, Republic of Congo

2. BP (TOLEDO) FRONT-END ENGINEERING PROJECTS for TOLEDO REFINERY and BPSH BP TOLEDO
Texas City, Houston, Texas, USA

3. CITGO CRUDE EXPANSION AND CONVERSION OPTIMIZATION PROJECT CITGO
Lake Charles, Louisiana, USA

4. CONOCO PHILIPS LOW SULFUR GASOLINE PROJECT
Ponca Cuty, Oklahoma, USA

5. HAMACA CRUDE UPGADER PROJECT HAMACA
Jose, Venezuela

6. SHELL GOAL VENTURE PROJECT
SHELL CHEMICAL COMPANY
Geismar, Louisiana, USA

7. PETROCHEMICA Bahia Blanca
DOW CHEMICALS
Argentina

1996 – 1997
NIDEC PHILIPPINES CORPORATION
Laguna, Philippines
Engineering Supervisor
(Rotating/Static/Package Equipment)

Prepare Requisition for Quotation package (RFQ) and specification for static and rotating equipment: Diesel Generator, storage tanks, industrial gas equipment, pumps, air compressor package, steam packaged boiler, AHU, cooling tower. Select rotating equipment and make packages for quotation and technical bid evaluation. Prepare of specifications and design drawings for bidding bid evaluation and make recommendations for equipment and construction projects. Provide material and labor estimates for equipment installation and construction projects. Technical bid evaluation. Perform Vendor Document Review. Facilities maintenance management. Project management. Commissioning and start up. Conducts safety training for plant personnel and contractors. Ensure work assignments and inspections are completed in an efficient and cost-effective manner and ensure worker compliance with safety regulations. Technical bid evaluation and vendor recommendation.

1994 – 1996
SUGARLAND INTERNATIONAL INC.
Manila, Philippines
Mechanical Engineer/ Maintenance Supervisor
(Rotating/Static/Package Equipment)

Prepare Requisition for Quotation package (RFQ) and specification for API static and API/ANSI rotating equipment. Such as pumps, air compressor packaged vessels, blender, packing machine, roller & belt conveyor, steam packaged boiler, cooling tower, vacuum pump, rotary heater, rotary conveyor. Select equipment and make packages for quotation and technical bid evaluation. Prepare of specifications and design drawings for bidding. Prepares technical bid evaluation and make recommendations for equipment and construction projects. Provide material and labor estimates for equipment installation and construction projects. Project management.
Facilities' Maintenance management and supervision. Commissioning and start up.

1992 – 1994
UNILOX CORPORATION
Pasig City, Manila
Junior Mechanical Engineer
(Rotating/Static/Package Equipment)

Prepare specifications and documents needed in the implementation of approved project such as: detailed drawings, equipment specifications, datasheets, outline drawings, contract documents, project plan and schedule. Prepare Requisition for Quotation package and specification for static and rotating equipment such instrument API air compressor package, API/ANSI pumps, centrifuge, decanter, steam packaged boiler, cooling tower, AHU, ASME vessel, and dust collector. Perform drafting works. Perform technical bid evaluation and vendor document review. Assist Maintenance Group in the implementation / commissioning of new upgraded equipment. Performs other duties that may be assigned by superior. Provide material and labor estimates for equipment installation and construction projects. Project management. Commissioning and start up.

PROJECT AWARDS AND CITATIONS

1. Spotlight Award given at Manila Fluor Daniel Office in May 2003 for BP Toledo Project
2. Cash Cheques Awards for Shell Project given in Manila Fluor Daniel Office for detail engineering
3. MVP employee award given in Manila Fluor Daniel Office for Kodak project for detail design.

TRAININGS AND SEMINARS

1. BOSIET-EBS (Emergency Breathing System) - MEGAMAS Training Co. Sdn Bhd,Kuala Belait, Brunei Darussalam;
05 June 2007

2. TROPICAL BOSIET INCLUDING TRAVEL SAFETY BY BOAT-OPITO Approved (Helicopter Safety & Escape, Sea Survival, Boat
Safety & Escape, First Aid, & Fire Fighting & Self Rescue); MEGAMAS Training Co. Sdn Bhd,Kuala Belait, Brunei Darussalam;
27-29 September

3. HSE (House Safety and Environment) FAMILIARIZATION FOR SENIOR STAFF; MEGAMAS Training Co. Sdn Bhd; Kuala
Belait, Brunei Darussalam; 21 September 2005

4. SIMULATED PROJECT TRAINING FOR FDIP MECHANICAL ENGINEERS; FLUOR DANIEL INC. PHILS; Muntinlupa, Philippines;
19 September – 19 November 2001

5. TECHNICAL SEMINAR for Mixed Flow Fans, Energy Recovery Ventilators, Dampers & Louvers, and fans & Blowers; GREENHECK
FAN CORP./FARENHEIT INC.; Makati City, Philippines; 12 September 2002

6. STRATEGIC PLANNING SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; March 2002

7. LEADING FROM THE FRONT LINE; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; March 2002

8. 9 TRAITS OF HIGHLY SUCCESFUL WORK TEAMS; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; March 2002

9. HOW TO LEAD A TEAM ; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; March 2002

10. 4-DIMENSIONAL LEADERSHIP; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; March 2002

11. PERSONAL EFFECTIVENESS; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; February 2001

12. INTERPERSONAL COMMUNICATION SKILLS; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; February 2001

13. HIGH IMPACT BUSINESS WRITING; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; December 2000

14. GETTING THE RESULTS YOU WANT; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; December 2000

15. PARTICIPATING IN PROJECT TEAM; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; December 2000

16. MICROSTATION; FLUOR DANIEL INC. PHILS; Muntinlupa, Philippines; 4-11 August 1998

17. INTERGRAPH PDS PIPING MODELING; FLUOR DANIEL INC. PHILS; Muntinlupa, Philippines; 17 August – 04 September 1998

18. INTERGRAPH PDS EQUIPMENT MODELING; FLUOR DANIEL INC. PHILS; Muntinlupa, Philippines;
17 August – 04 September 1998

19. DOCUMENTING QUALITY SYSTEM; SGS PHILS., INC.; Muntinlupa, Philippines; 26-27 November 1998

20. PNEUMATICS FOR LOW COST AUTOMATION; SMC PNEUMATICS PHILS.; Paranaque City; 07-10 June 1994

NON TECHNICAL TRAINING

1. TEAM BUILDING PROGRAM; TIME; Muntinlupa, Philippines; 14-15 November 1998

2. PROCESS/MECHANICAL TEAM BUILDING PROGRAM; FLUOR DANIEL INC. PHILS; Antipolo City, Phils.; 23-24 August 2002

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 3092)

Go to Search Parameters...

Brief Description

MSc. Civil Engineer, major: Land Surveying; 19 years experience of cadastral (legal) and public utilities and road surveying and topographical mapping

Conducting different jobs related training, Conducting Safety Tool Box training, preparing risk assessment and method statements for critical and high risk activities. Inspection of Rigging and Lifting tool and monitoring for safe rigging operations. Giving basic training to employees on fire fighti

Graduated in 2000 with a BSc in Architecture. Since then, I have been involved in the supervision of site works and the execution of architectural finishes in addition to the review of shop drawings for major mixed-use developments and tourist resorts in Egypt.

Scaffolding coordinator-supervisor and Safety manager

Three year full time diplome in Mechanical Engineering and have six year experience in Repair and Maintenance of heavy earth moving equipments

35 YEARS ELECTRICAL ENGINEER/HV/PLC

Inspection of Welding/Painting/Piping/Pipeline Activities

Bachelor of Engineering with over 27 years experience in Process Automation & Control industry.

Computer Knowledge: ArcGIS, MapInfo, Encom-Discover, Plaxis2D, Plaxis 3D foundation, 3D Tunnel, CESAR-LCPC, C-Tunnel, and Geo5 softwares. Qualifications: M. Tech ¡V Rock Engineering & U/g Structures i.e., Geotechnical Engineer, Civil, IIT Delhi

OSHA certified EHS Engineer with 3.5yrs experience

Professional Engineer with extensive international experience in chemical/environmental engineering and Construction Management. Very proficient in Project Mangement tools. Doctorate degree in Chemeical Engineering and pursuing PMP certification.

I ama Graduate Quantity Surveyor currently working in Dubai asa Project Quantity surveyor

Piping & pipeline constructions

Mechanical Engineer with more than fifteen (15) years of combined experience in engineering in various industries, which includes plant operations in various industries, which includes offshore and onshore oil & gas design, petrochemical, chemical manufacture, gas processing, and other industries.

I offer a Civil Engineering background specialized in Soil Mechanics and Foundation Engineering with a total of four years of working in various projects in India.

Skills: Critical thinking, active listening, negotiation, persuasion. Qualifications: Product /Proyect /Marketing Manager

Civil/Structural Designer with over 12 years professional experience

ECT in Electronic Engineering with 11 years experience in the Electrical Industry. Experienced and trained on LM2500, LM6000, TM2500s, GE frames T1/T3; PBX; GPS; Digital Switches; Nortel DMS 250/500 certified; Allen Bradley, Siemens, Fanuc, MarkV ,MarkVI,Woodward and Bachmann PLCs; COAX cable test a

civil draughtsman with 1yr and 8 mths exp. well experienced in structural steel, fabrication drg, r.c.c drg, architectural drg, working with german eng.. company uhde india pvt ltd as a sub contracter mumbai no.1 construction co, having round abt 100 branches world wide

I have the experience of complete Electrification of UP Petrochemical Plant and commissioned various Coal Handling Plant in various projects in Fenner India Ltd. I was working in Hyundai engineering and construction company ltd, Korea as Astt. Manager(Electrical) in Abu Dhabi for 19no. 33/11 KV

Construction Engineer, Commissioning Engineer, Instrumentation Designer, Field Engineer, Construction Coordinator, Lead I/E Designer, Instrumentation Design Supervisor, Instrument Engineer, Project Engineer, Pipeline Block Valve Engineer - these are some of my more recent job titles.

I have an N4 qualification in civil engineering, passed two courses in N5, registered two courses in N5, experience in building, road construction, and riggeriing.

I have over 3 years experience in drafting and I am well versed in structural and architectural design. I have considerable experience coordinating and executing projects with engineers and contractors and have a thorough knowledge of drafting processes and procedures. I work well with people and en

AutoCAD, Architectural, Instrumentation Drafting, Civil Drafting, Pipe Drafting, CadWorx

Nuclear Operations Supervisor. Supervised operations ensuring safety of personnel and equipment. Supervised maintenance operations on I&C equipment.

Experience includes Cost Engineering, Electrical/Instrumentation Estimating, Construction Electrical Engineering and proprietary software support. Duties include reporting of various kinds, forecasting, change management, staffing plans, cash flows and more.

Project Management/Engineering/Construction, with over 25 years of professional experience in EPC projects, in Management, Engineering and Construction in oil and gas field, infrastructures, site development, roads, airstrips and buildings, Proven Project Management skills with post responsibility

qa/qc engineer (E&I),6years experienced

Please consider this letter as an application for employment within your company. I wish to apply for the position as HVAC ENGINEER /Design Drafter/Quantity surveyor that will give me an opportunity for growth and career challenges particularly in the areas of design engineering and technical drafti

Land Surveying, Setting Out, GIS, Cadastral, Photogrammetry, Remote Sensing, CAD

HSE Officer with a background of over 19 years in handling safety, Health and Environment in large multi international Oil & Gas, Chemical and Construction Companies (industrial, power plant, petrochemical, marine facilities and heavy fabrication).

Estimation, Quantity survey, planning, design

Level II certificate in PT,RT,MT and UT..Confident to take up any job in oil field industry.Good knowledge in drawings,construction materials,welding standard,piping,test pack completion etc..

Ability to learn new Languages, Technologies quickly Strong Knowledge in Civil Engineering Subjects Proficiency in Software Packages like Auto Cad, Auto Lisp, Staad-III Good Practical Knowledge in Civil Constructions „h Ability to learn new Languages, Technologies quickly

I am interested in a position within your company’s electrical installation or electrical service Departments.

7 years of experience in the field of design, development, analysis. Design and modeling of Special Purpose Machine, Machine tools & accessories, Dies, Cams, jigs and fixtures etc.

I am looking for a position of Field Engineer, Office Engineer or Quantity Surveyor. I worked with the JBC for a little over a year. I am a very hard worker. I am very proficient at reading spec books and engineering drawings.

Civil Construction Engineer, Construction Superintendent Lead Civil Engineer

I am Civil Engineer having 9 years experiance in marine works. construction of breakwater, Quawalls installation, boat ramps, shore protection, reclamation and dredging with multinational construction company and consultants. presently working with reputed consutlant in maritime field.

Over 20 years of Electronic, Electrical and Mechanical experience. 10 years of Field Service in both domestic and international travel.

I am lead piping engineer ,supervised 6 engineer ,6 autocad drafter and 7 PDMS staff.I am familiar with all international stds related to oil&gas ,petroleum and power plant.

HSE Manager in major energy, power generation, oil and gas sectors covering technical and commercial requirements. With professional experience in directing and mananing health, safety and the environment protection & sustainability development aspects as per OSHA framwork and guidelines. Strong abi

18 Years including 10 years in oil & Gas - Construction experienced Safety Specialist , having Mechanical engineering Degree from Bangalore University and Diploma in Industrial Safety From RLI Chennai, India & OSHA 30 Hours Trained - Key skills : Construction Safety Mangement, Auditing, Trainer

Educational Qualifications: Master of Engineering in Mechanical Engineering specializing in Welding Engineering from Indian Institute of Technology, Roorkee, Uttar Pradesh, India in April 1996 with 74.40%, American Welding Society (AWS) Certified Welding Inspector (CWI) -AWS-CWI Certificate

Planning, Scheduling, Project Controls, Cost Tracking, Site Management, Construction Management

3 yrs diploma in mechanical engineering with 1st class from bset, bhubaneswer (india) in April-2002 professional qualification: -• cswip 3.1 (twi) certification for welding inspector, cert. no- 36291 •surface preparations & paint application techniques (certification from jotun paint school)

Senior Primavera 6.2 Planner / Scheduler or Management Skills

Experience as Piping Designer, in performing Pipe Modeling, Piping Arrangement Drawings, Checking & Extraction of Isometrics from 3D Model. ƒá Hands on Experience in Piping Software¡¦s ¡V Bentley¡¦s PlantSpace Design series, Microstation, PDMS & TRIBON M3. Knowledge of Piping Stress Analysis.

I have done degree in mechanical engineering. I am having AWS-CWI certification. And I am also having approval of Saudi Aramco as a Welding Inspector. I have also done ASNT level-II in UT, MT, RT, and PT. I am having more than 5 years and 8 months experience in oil and gas field.

Highly skilled graduate Project Manager/Civil Engineer and Project Controls Lead with more than 25 years related domestic and international experience in project and construction management.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out