Resume - Three and half year experience in CADD software like Unigraphics, AutoCAD 2000 f...

Misco Jobs

Resume #11495

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To be part of a developed organization where I will be able to put my design skills acquired academically and through experience to best use.

CAREER SUMMARY:
- Extensive Three and half year experience in CADD software like Unigraphics, AutoCAD 2000 for 3D modeling, Composite Design, Assembling and detail drafting.
- Knowledge in the fundamentals of Computer Graphics under Unigraphics for Helicopter components, assembly, subassembly, part drawings etc.
- Sound knowledge of fundamentals of FEA using NASTRAN.
- Also undergoing training in HyperMesh.

EDUCATIONAL QUALIFICATION:
Bachelor of Engineering (B.E) in the field of Mechanical.
Passed out in year 1999 with First Class with Distinction (73.7%) from Karnataka University.

EXPERIENCE PROFILE:
(From Feb 2001 to Present)
Engineer (Design) for Hindustan Aeronautics Limited- Helicopter Division (Rotary Wing Research & Design Center).
Rotary Wing Research and Design Center (RWR&DC), is the organization in which I am working and referring. This center is also a division of H.A.L Design complex is responsible for design and development of Helicopters. Cheetah, Chetak and the prestigious multi role Helicopter "Advanced Light Helicopter" (ALH) are a few helicopters HAL has under its wings.
Responsibilities:
- Design, Development & Drawing, Preliminary Analysis of ALH (Advanced Light Helicopter) and LCH (Light Combat Helicopter).
- Design, Development & Drawing of structural parts & assemblies.
- Data based management for Productionizing Drawings & drawing release.
- Solid Modeling & Surface Modeling of Structural Parts.
- Integration of Assemblies in CAD Packages like Unigraphics, Solid Edge & Autosurf.
- Involved in productionizing of drawings namely converting manual to CAD Drawings.

PROJECTS HANDLED IN HAL INCLUDE:
Design of Bottom Panel Assembly
Softwares used Unigraphics, Autocad 2000, R14, Autosurf
Bottom panel Assembly is situated below the Transmission Deck Area. Bottom panel Assembly serves as the drain system for the Transmission Deck Area. Bottom panel assembly has drain routing system for oil and water draining through the hosepipes to below the side shell.

Design of Additional Beam Assembly to reinforce in Engine Deck Area.
Softwares used Unigraphics, Autocad 2000, R14, Autosurf
Additional Beam Assembly has been introducing in the Engine Deck Area to avoid the vertical oscillation tendency of the aircraft during the VNE (Velocity Never Exist) at certain altitude.

Design of Fixed Step and Foldable Step Assembly for Civil Version of ALH (as per user requirement).
Softwares used Unigraphics, Autocad 2000, R14, Autosurf
As per the user requirement a Fixed Step and a Foldable Step has been introduced in the Civil Variant Helicopter by taking consideration of the ergonomics factor.

Design & Modification of Window Assembly (as per user requirement.)
Software's used Unigraphics, Autocad 2000, R14, Autosurf
Increasing the cut out of the window panel and window glass and reinforcing the window frame assem have increased visibility of the window glass.

Design of Positive Locking of ARIS BUSH in Transmission Deck Area.
Software's used Unigraphics, Autocad 2000, R14, Autosurf
Its main purpose is to support the ARIS pendulums that are housed in the corner beams diagonally to attached to the longitudinal beams at the four sides of the corner. Two rear machined corner beams have the same provision for ARIS pendulum support at the rear. These are parallel to the four ARIS beams. This serves the purpose of isolate the fuselage from vibrations caused by the rotor system.

Indigenous Design & Development of foldable strut assem. For Slithering Boom Platform
Softwares used Unigraphics, Autocad 2000, R14, Autosurf

Slithering boom is structural member attached to any typical helicopter that facilitates the troops to get dropped or picked up from the enemy's territory from a hovering helicopter. To carry out this slithering operation a slithering platform is provided which is of foldable type. The purpose of foldable type is to close this platform in the cold condition.

Study Concept for Strut Assembly of Stub Wing for Weight reduction.
Softwares used Unigraphics, Autocad 2000, R14, Autosurf,
Strut assembly is a load carrying member which is attached to the stub wing to the frame #5 & #5A. Strut tube is made of steel tube. Now this steel tube is converted into Al. tube.
Design of Emergency exit door for Advanced Light Helicopter.
Software used: Unigraphics, AutoCAD, Autosurf.
Emergency exit door is used for emergency bailing out. Emergency exit door is locked at 6 points by interconnected pins. By operating a jettison handle the door detaches within seconds.
Extensive work on various Composite parts like Bottom Structure, Tail Boom, End Plates, Horizontal Stabilizer and related Fairings.
3 Dimensional modeling of Intermediate Gear Box and Bottom Structure of ALH – Softwares used: Unigraphics.

COMPUTER SKILLS:
CAD Software:
Unigraphics v17/NX, AutoCAD 14/2000, Autosurf, Solid Edge, MSC NASTRAN (Finite Element Analysis), HyperMesh (under process).
Others: MS office (Word, Excel, PP)
Operating System: Windows 9x/2000.XP

OTHER DETAILS:
Current CTC: 1.2 Laks/annum
Expected CTC: As per company norms
Ready to be Relocated: Yes
Duration to join the company: 1 week to 10 days

REFERENCE:
Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 3123)

Go to Search Parameters...

Brief Description

Have 4 years of experience in design and construction of Highways, Pre-Stressed concrete bridges and residential and industrial buildings.

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Exposed in several construction company involved in Engineering Procurement Installation Commissioning and Build Operate Transfer type of Contract at Oil & Gas, Petrochemical and Power Plants. In addition to that I’ve been in the Operation and Maintenance a couple of years at the Refinery and Petroc

Plant Inspector or Quality Assurance/Control Inspector API 510/ AWS CWI

Senior piping designer

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

A suitable position in the area of electrical schematic drawings and designing of electrical panel boards, cable layouts, etc. and/or designing of electronic circuit layout and PCB by using CAD software .

Mechanical Engineer

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Experice engineer with project engineering and project managemnt

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Transmission Engineer- power system circuit and substation design & planning

Mechanical Engineer, with 14 years exp, expertise in construction, marines structures, fabrication of offshore, marine structures and ship repairs, quantity surveying, planning and scheduling, cost estmating

Instrumentation & Control Engineer with over 14 year experience in Basic & Detailed Engineering, Supervision, Commissioning of off shore / on shore fields. Profitional in Field Instrument, DCS, Automation, HV/LV Elect Switchgears.

Post graduate Engineer with experience in marketing, engineering, insurance survey.

Can estimate cost for any construction project

P.E. Electrical with 20+ vears, Specilize in power distribution and electrical maintenance for mining and heavy industrial equipment

APPLY FOR THE POST OF QA /QC API 510 PRESSURE VESSEL INSPECTOR – CSWIP 3.1 WELDING INSPECTOR, BGAS-CSWIP PAINTING INSPECTOR, NDT, DOCUMENTATION

I am an Oil & Gas Facilities Project Engineer (B.Sc. in Mechanical Engineering, 1980) My duties are to develop, supervise, and execute design, procurement and construction of engineered hydrocarbon projects.

Soil investigation and plinning work

Testing & comissioning of control panels with good knowledge of design.

Have good working knowledge of AutoCad 2002, AutoCad 2004, Adobe PhotoShop, CorelDraw, Microsoft Excel, Microsoft Word, 3D Max Studio, A.D.T., Micro Station and Internet.

I want to work as a project engineer and/or site engineer

Three and half year experience in CADD software like Unigraphics, AutoCAD 2000 for 3D modeling, Composite Design, Assembling and detail drafting.Knowledge in fundamentals of Computer Graphics under Unigraphics for Helicopter components, assembly, subassembly, part drawings etc.

12 yrs. of underground mining, Electrician, All around maintance Man, Heavy Equipment Operator, Gas & Diesel Mechanic, Small Engine Repair, Carpenter, Mason. Plumbling.

10 years drafting experience for AT&T, and Verizon, Read and interpret construction notes and drawings. I strive for excellence in everything I do.

Experienced Cad Operator in Architectual, Civil, & Telecomunications

I am a post graduate in Production engineering with over 18 years of experience in heavy earth moving equipment and auto vehicles

Electrical Project Planning Engineer (Primavera P3 & P6) with MBA Degree

Project, Project manager, maintenance, maintenance manager, production, production manager, mining, heavy equipment

Controls Engineer, ControlLogix, Manufacturing Engineer, Engineering Manager, PLC Programming, Robotics, Machine Vision

Mechanical design Post Graduate with 9 Years of experience in process industry and design of tank, vessels, EPC packages, other static and rotating equipments like pumps, compressors, turbines, agitators, etc.

Lincensed Professional Land Surveyor

Electrical Construction Supervisor, Electrical Superintendent, Project Management experience, 20 years experience, petrochemical, Power plant, Pupl & Paper,Hv Lv, Instrumentation, Project planning, Estimating & Tendering, HSE competent,

Mechanical foreman and non-destructiv testing inspector

Environmental Management & Permitting/Mining - Oil & Gas - Power - Infrastructure - Construction/Domestic (USA) & International

Senior Mechanical Draughtsman(MEP)

6 G WELDING (GTAW / SMAW) (welder job)

MECHANICAL/ PIPING/ FABRICATION ENGINEER 4 YEAR TOTAL EXPERIENCE INCLUDES 2 YEAR SAUDI AABIA EXPERIENCE

9 + year Experienced senior Document Controller having 5+ year Overseas experiance in india,Dubai and presently working in singaopre , in a world leading EPCM company

CIVIL ENGINEER WITH 17 YEARS EXPERIENCE IN BUILDINGS, INFRASTRUCTURES, TREATMENT PLANT AND OIL & GAS INDUSTRY

Marine chief engineer(unlimited)- shipbuilding supt, A team player,good manmanagement qualities,likes to involve in a project from concept to completion within strict time/budget controls.

Sir, Are You seeking an intelligent Graduate Mechanical engineer with extensive problem solving and technical skills? If so, my 3 Yr experience in mechanical engineering background may be of interest to you. Thanking you for your time and consideration.

civil engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out