Resume - I have held management/technical positions with the companies listed within my r...

Misco Jobs

Resume #15199

CONTACT INFORMATION:
View contact information...

SUMMARY:
Manager with over twenty years of progressive experience in construction, environmental activities, mining, industrial mineral/material processing & chemical manufacturing, sales and marketing, and business development with privately held and Fortune 500 companies. Demonstrated proficiency in P/L & financial accountability; budgeting and cost control; operations and project management; personnel development; and safety, compliance & quality.

PROFESSIONAL EXPERIENCE:
C-B Contractors, Inc. - Boise, Idaho (1998- Present)

An $11+m concrete construction company specializing in industrial, commercial and retail construction.

General Manager
Responsible for all functional, financial and operating aspects for a privately held concrete construction firm. Highlights include:
-Total business reorganization for the purpose of financial growth, cash flow management, and asset (employees and equipment) protection.
-Assisted in profitable revenue increases from $1.75m to over $11.5m in sales while maintaining financial liquidity, low debt and a very lean firm.
-Created all systems, policies & procedures for human resources; accounting & cost control; OSHA (1910, 1926, 40 CFR's), federal & multi-state level compliance; and overall management of the company. Recruit, hire and train personnel.
-Responsible for scheduling, procurement, job set-up, estimating, budgeting, cost control, change orders, QC, punch-lists, etc. for projects up to $2.0m throughout the western U.S.
-Assist the Owners in all short and long-term planning and decision-making. Helped take the company to the rank of 84th largest concrete contractor in the United States in 2003 (ASCC).
-Successfully registered the corporation to conduct business in and expanded sales into Alaska, Arizona, California, Montana, Nevada, Oregon, Utah, Washington and Wyoming.
-Hands-on manager responsible for all day-to-day operations for all functional areas with minimum staff to maintain low overhead and increased gross margins.

WORLD RESOURCES COMPANY - Phoenix, Arizona (1996-1998)

A hazardous waste recycling company producing material concentrates for the smelting industry.

Vice President, General Manager - Western U.S. and Pacific Rim Operations

Responsible for the direct P/L for a division of a privately held, multi-million dollar materials recycling company based in Mclean, Virginia. Highlights include:
-Oversaw all 24/7 processing of material wastes into kiln-dried and classified/graded mineral/metal feedstock to smelting customers. This included nickel, copper and precious metals composites.
-Leadership, recruitment and development of 65 operations, technical and marketing personnel for the Phoenix facility and offices in Taiwan and Malaysia.
-Lead all divisional sales and marketing activities for the Western U.S. and Pacific Rim. Set fee-based pricing strategies as well as specific goals & objectives. Achieved record annual sales volumes in 1997 with a client base of nearly 400.
-Maintained strict adherence to all local, state and federal DOT, safety and environmental regulations. Instrumental in the preparation and submittal of the facility RCRA Hazardous Waste Permit application for a treatment and storage facility (TSD).
-Managed all functional areas including, operations & maintenance, technical, transportation/logistics (truck & rail), information systems, accounting, HR, etc. for the division. Implemented a rotating 4/10 work schedule resulting in reduced overtime, increased productivity and improved morale.

CYPRUS-AMAX MINERALS COMPANY - Denver, Colorado (1985-1996)

A $100+m division (Cyprus-Foote Mineral) producing lithium, sodium and by-product chemicals, metals and industrial materials/minerals.

Manager - International Sales & Marketing - Kings Mountain, N. Carolina (1994-1996)

Responsible for sales and marketing of all lithium product lines in all countries outside the U.S. Primary market development regions included Central & South America, Japan & S.E. Asia, and Europe. Highlights include:

-Responsible for developing, planning, and implementing the company's international sales & marketing strategy; establishing controls and measures for success rate; analyzing marketing activities of the company and its competition; evaluating marketing channels and demand trends; and initiating, coordinating, and implementing promotional activities.
-Focus and guide the efforts of more than 30 agents and trading partners to service over 150 diversified customers. Created annual sales in excess of $45m generating record profit and revenue in 1995 & 1996. Key interface for division with production operations to meet customers chemical and physical product requirements.
-Created annual pricing strategies, budgets, and forecasts for the Company's international and domestic sales plan.
-Analysis and appraisal of technological trends in industries served to maximize short and long-term profit, revenue, cash flow, and capital investment.

Operations/General Manager - Silver Peak, Nevada Operations (1990 - 1994)

Responsible for the management and coordination of all activities for a 24/7 chemical/industrial material manufacturing plant and solution mine producing lithium carbonate and sodium/potassium/magnesium chloride products. Highlights include:

-Leadership and empowerment for a work force of up to 110 people, including construction & contract mining personnel. Consistently achieved or exceeded overall productivity, financial, and safety (OSHA) & environmental (NDEP) goals and objectives. Achieved over 1,000,000 man-hours without a lost-time accident (company record).
-Oversaw all chemical and physical processing for liquid to solid state from raw material feed, centrifuging, phase change, vacuum filtering, drying, classification, conveyance/material handling, packaging & logistics. This included all atmospheric and waste water process controls.
-Managed all location functions and controlled an annual operating and capital budget up to $20m. Initiated & oversaw an $11m capital plant expansion completed on budget in 1995.
-Formulated strategies for maximization of P/L, cost containment, productivity, and capital expenditures to optimize use of funds and reduce risks to personnel and assets with an estimated replacement value of over $100m.
-Lead all TQM activities to ensure employee empowerment, internal and external customer satisfaction, and retention of ISO-9002 registration achieved in 1993. Communicated and coordinated activities with corporate sales and customer service to increase customer satisfaction.

Please request details of additional work history.

EDUCATION AND PROFESSIONAL REGISTRATION:
M.B.A., December, 1992, Pepperdine University, Malibu, California.

B.S. Geology, May, 1984, Idaho State University, Pocatello, Idaho.

Registered Professional Geologist, Wyoming PG-670

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 2821)

Go to Search Parameters...

Brief Description

Automation and Instrumentation Specialist. College diploma in industrial electronics (Teccart Institute) option: regulation, instrumentation and automation. Graduated with distinction, May 1999.

Geologist

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

BS EE, Program/Project Management, Business Development, MS Project, Oracle Financial Analyzer, Data-Voice Value Added Service projects & business, GSM 900 infrastructure (Ericsson) deep knowledge, Wireless and Service Engineering Planning, MS Office, IP Networking

Bsc (Hons) Surveying, 5 years experience, Competent with setting out, topograghical surveys, mine surveys,cadastral surveys

technocommrecial, Erp Uers,

Having approx. 10 yrs of professional experience in Instrumentation / Electronics field in Oil & Gas ( Refinery ) Sector.

Researched and implemented a 32 X 32 CMOS Image sensor using ‘Cadence cmosp18 tech. Implemented the schematic circuit design and layout for Active Pixel Sensors (32 X 32), 32 CDS units and 32 differential amplifier units.

I have experiance with the Project Control department by working on Primavera Project Planner 3.1, ec or 5 and Maximo and Claim Digger.

ITI Electrician, Diploma Electrical, Computer Diploma, Hardwere & Softwere Knowledge, Apprentischip in Lineman Trade From State Electricity Board

Seven years of progressive advancement as Planning Engineer/Project Control, with a unique mix of exposure on project/construction engineering, quantity survey/cost control, and estimating. Proficient with Primavera Project Planner (P3) and Microsoft Project

Free! I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.

General Mechanical & Maintenace Technician.

Operations, I&C, Electrical, Startup, Commissioning Experience. 11 years of progressive technical and supervisory roles in Oil/Gass and Power Plants. Includes Gas Turbine, Comined Cycle, and Pipeline Operations.

I am an experienced Mechanical Engineer in the field of Design & Welding (IWE) Engineering. I obtained my Dipl-Ing. certificate (equivalent of MSc(Eng.) in Design and Construction of Agricultural and Construction Machinery from the Technical University of Berlin in Germany

Rigger with RGIT 20+ years experience

Instrumentation supervisor - QP refinaries, Qatar

Drafter/Designer-Entry Level with some experience

Diploma in Surveying; Profficient in SURPAC; AutoCad, Vcad

Masters in Mechanical Engineering - 2004, Bachelors in Mechanical Engieering – 2001, Computer awareness:Auto CAD, MS Office, MS Projects, Power Point Presentations; Trained & Certified for Health, Safety & Environment - IOSH

Looking for a mechanical engineering position.

Having total experience of 14years 11months in Offshore, Onshore, Chemical and Refinery fields with strong PDMS Piping Designing, Draft, Isodraft and PDMS Administration background looking for an opening of PDMS Piping Designer

for 25months at PetroRabigh Development Project PC1 & PC3 as a Snr.Planning Engineer with Gama Industry. Capable to detect every single activity's bottleneck that prevents to achieve the "MC, PC & RFISU".

Data manager with over 10 years of experience in the mineral exploration industry providing high quality digital tools, data and information to geoscientists. Extensive experience managing IT projects and services on an international environment. Strong analytical, organizational and technical skill

Fresh Mechatronics Engineering Graduate

Oracle dba, technical support

Java, JSP, Servlet, J2EE, JSTL, SQL, PHP, ASP, XML, HTML

I am presently working here in Saudi Aramco Oil Company as Supply Maintenance Planning Support Engineer. Since I started to work for my profession, I'm exposed more on Operation and Maintenance ( Reverse Osmosis , Desalination, Power Plant, Manufacturing & Petrochemical).

Can work with computers, good communication skills, team player, can work under pressure

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

Drafting, estimating, typing, computer literate: MSWORD, MSEXCEL, COREL DRAW, AUTOCAD, POWERPOINT, PIPES & PIPES++

Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)

Fitter Including Machining and Diesel Fitting

Precision Millwright, Welder. Turbines, Power Plants, Ethonal Plants, Steel Mill Plants.

Electronices Automation Control engineer designer

experienced electrician with vast instrumentation and supervisory experience.

CIVIL ENGINEER WITH 12 YEARS OF EXPERIENCE IN CONSTRUCTION FIELDS

• More than ten years experience in project/operation management and real estate development

Iam a Mechanical Design Engineer with experience in Heavy steel structures, Pressure Vessels ( Several Types), Power Generation, Material Handling. I have quite a number of projects to my name that have been completed succesfully

Big believer in teamwork, organization and co-operation, have the ability to perform well under pressure, hard worker, able to behave as a leader, manage stress.

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

I wish to introduce myself as an Automation Engineer with over 8 yrs of exp in automation field.

I am mechanical engineer 2002 ,I work as site engineer in the construction companies.

I am a highly experienced and enthusiastic Electrical, telecommunication, electronics and computer Engineer, especially in the mechanical and electrical field, currently working as a maintenance manager, looking for a challenging job where my experience, education, background, certifications and tea

Experienced in construction document controls, field office management, setup initial document controls for field office, project scheduling with Primavera P3 and MS Projects.

Quality Assurance in Oil and Gas industry

An enthusiastic and professional Engineering Manager; chartered mechanical Engineer, who enjoys being part of, as well as leading, a successful and productive team. Quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems. Able to work well on his own initi

I am a Broadcast Technician ZBC-TV in Zimbabwe. In March 2006 I completed a 4 year apprenticeship with ZBC-TV and have worked as permanent staff ever since. I am a Class One journeyman and hold a National Diploma in Electronic Communication Engineering.

I am trained in on-site and laboratory calibration of instruments and specializes in water quality testers and analyzers. I am also familiar with softwares used in engineering and design. I am knowledgable in PLC programming and capable of troubleshooting program errors.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out