Resume - Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning

Misco Jobs

Resume #15736

CONTACT INFORMATION:
View contact information...

EDUCATION:
South Bank University, London
B.Eng. (Hons) Engineering Systems Design (2nd Class Upper)
University of London
LL.B (First and Second Year)

MEMBERSHIP:
Graduate Member of the Inst. of Mechanical Engineers, London
Graduate Member of the Inst. of Measurement and Control, London
Graduate Member of the Board of Engineers, Malaysia

WORK EXPERIENCE
Current Employer: MINCONSULT SDN BHD (1997 to Present)

Seconded to TEPSCO (Japan) Ltd. (March 2002-Present)
Tuanku Jaafar Power Station Rehabilitation Project (750 MW Combined Cycle Power Plant)
Contractor: Mitsubishi – Mitsui Consortium
Position: Combined Cycle Engineer (Site Resident Mechanical Engineer)
Responsibilities: Review of Drawings, Site Management with regards to installation of Mechanical equipment etc. Gas Turbine, Gas Turbine Generator, Steam Turbine, Steam Turbine Generator and Heat Recovery Steam Generator package and balance of plant (inclusive of Water Treatment plant, Electrochlorination plant, Emergency and Black Start Diesel Generators, Effluent Treatment system, Chemical Dosing system, Service Air system, etc.)

Seconded to ARIF TENAGA SDN BHD (March 2001 to December 2001)
11kv Cabling Works in Kulim Hi-Tech Park
Position: Project Engineer/ Deputy Site Manager

- Administration and Execution of Works.
- Liasing with Authorities inclusive of Approvals

Seconded to TOSHIBA CORPORATION [Main Contractor] (June 2000 to Feb 2001)

Rehabilitation of Gresik Steam Power Plant Unit 2 - Indonesia.
Position: Project Engineer / Deputy Site Manager
- Project Engineer and Deputy Site Manager for Main Contractors (Toshiba Corporation).
- Administration of boiler refurbishment and steam turbine re-blading contract between ALSTHOM and Toshiba.
- Monitoring of equipment shipping and site work progress.
- Administration & coordination among the parties concerned including owner, consultant (TEPSCO), ALSTHOM and Toshiba Corporation.

MINCONSULT SDN BHD (1997 to Present)
Position: Mechanical Engineer
Contractor: Peremba-Kentz Consortium
180 MW Power Development Project, Karambunai, Sabah
4 x Frame 6 Gas Turbine Combined Cycle Conversion project
- Involved in the coordination and preparation of the Tender Documents.
Tuanku Jaafar Power Station Port Dickson, Rehabilitation Project - Phase I - 750 MW Combined Cycle Power Plant
- Involved in the preparation of the Design Concept Report.
- Involved in the coordination and preparation of the Tender Documents.

Kulim Hi-Tech Park Independent Power Utility Project, Kedah 450 MW Combined Cycle Power Plant

Phase 1
- Review of P&I Drawings and General Electric supplied equipments. Involved in all coordination activities for obtaining the statutory approvals.

Phase 2
- Involved in the preparation of Functional Technical Specification for HVAC and Fire Fighting Systems.

Gelugor 330MW Combined Cycle Power Plant Upgrading Project

- Involved in the preparation of tender document.
Proton City Development Corporation
- Involved in the preparation of feasibility report for a Captive Co-generation Power Plant.
- Involved in load survey activities for evaluation of data collected from PCDC vendors.

120 MW Power Development Project, Karambunai, Sabah
4 x Frame 6 Gas Turbine based open cycle power plant

- Involved in the evaluation activities and review of Isometric and P&I Drawings.
- Involved in the preparation of bill of quantities for piping, fittings and valves.
- Involved in the preparation of documents and coordination activities for submission to Department of Health and Safety.
- Assisting Senior Engineers on all on-going activities to obtain ISO 9001 certification for the company.

Cyberjaya Flagship Zone (Project Management)

- Assisted in development of the Financial Modelling for road works.
ISO
- Project Quality Engineer for Tuanku Jaafar Power Station Project for the implementation of company ISO procedures

COMPUTER SKILLS
Fully versatile in Microsoft Excel Programming, Microsoft Word and Microsoft Power Point (for presentations purposes). Basic Modula-2 (Pascal Based) programming experience.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 2821)

Go to Search Parameters...

Brief Description

EXPERIENCE PROFILE (7 YEARS)

MEP Manager with 14 years of int'l exp. in construction. Verify design, construct and commission. Executed prestigious & high rise buildings project which MEP works value in excess of US$380 M. Supervise and coordinate work acc. to contract ,budget, time, co. procedures & ensure client satisfaction.

site engineer for a land development project that covered earthworks and HE utilization, roadworks, driange, waterline and housing projects on mass housing and medium scale units

i have passed Degree(B.E.) in mechanical engineering with spl. in welding technology and now i am working as a welding engineer in boiler making company from 2 and half year. my job profile is making WPS,WPQ,PQR, TDC, and shop floor inspection.

MECHANICAL ENGINEER WITH EXPERIENCE IN DESIGNING

Nace level 3 coating inspector, CINI certified insualtion inspector & Chartek certified fireproofing inspector.

A Wide experience in drafting in major of civil works, structural, mechanical, Piping & Instrumentation and architectural drawings, 8 years of overseas experience,Overall 15 Years of working experience in civil, structural, mechanical, piping, and architectural firms

More than 13 years post qualification experience out of which 7 years in Occupational Safety and Health, (4.5 years in oil and gas sector) interested in the development of modern techniques in the construction and oil field industry

Electrical Engineer ( project & design) with more than13 years of experience with MNC in India, Japan , Middle East for Oil and Gas, Petrochemical, Chemical, Power.

PROFILE: Proficient in shuttering works, Steel reinforcement & fabrication, pipe fittings

I am a Senior Planner/ Project Controller with certified versatile capabilities and experiences in different fields of construction, including, but not limited to, Building construction, massive civil work, industrial construction, petrochemical construction, commercial complex and high rise buildin

Having six years of experience in managing various geotechnical projects with expertise in planning and execution of geotechnical investigations for mega industrial project sites incorporating all significant aspects.

have skills and knowledge in science information technology and industrial engineering.

Mechanical Enginner with two years experience in designs for commercial, domestic and retail buildings specialising in HVAC, water supply and waste reticulation.

Engineering experience of construction projects; piping system and water resources

Experienced equipment manager with earthmoving, material handling equipment, and cranes.

I am a Mechanical Engg graduate, with 9 years experience in various projects, out of which 7 years at Jacobs H&G Private Ltd. (an associate of Jacobs Engineering. Inc. USA), in ISO 9001 environment.

An Engineer with business acumen, client awareness, practical skills, overseas experience and sound engineering knowledge.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

Geotechnical Engineer working in design, planning, technical follow, contract administration, reporting, financial studies and cost control of underground works such as DW, Piles, Grouting, Tunnelling, Dewatering.

Onshore drilling HSE Advisor

I am currently transitioning out of the U.S. Army. During this time, I have acquired extensive knowledge of electronics and electronic systems

I have 21 years of professional experiences with several EPC Companies (Snamprogetti, ABB, Technip and etc.) and Clients (AGIP, CHEVRON) overseas in Civil Construction / Project Management Team.

Structural design

I have 8+ years in surveying including construction, boundary, topo, ALTA, environmental, and other special surveys. I have managed and trained field crews. I am proficient with GPS and robotic total stations. I have experience with CarlsonSurv2007, AutoCad LDD 2002-2006, LGO, and TGO.

I am a geologist with at 13 years experience in different fields of engineering geology. I have involved in different engineering geological and geotechnical studies of major infrastructures such as dams and tunnels. I am dynamic and motivative and wish to improve my knowledge in geotechnic

Quantity surveying and set work shop drawing

Field service, strong troubleshooting skills, electrical/electronic

Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation

Mechanical Engineer with 3 years of experience in electrical instalations

Summary of Qualifications. Eighteen years of documented success in the design, oilfield and construction industry. ·Experience on project and design working extensively with the Designers and Engineers.

Senior Electrical/Design/Project Engineer for HV and MV substations

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

About eight years of solid experience in designing and implementation(execution) of structural works

Experience in Construction of Power House, Highway Roads, Highrise Buildings, Canals, Air Ports, Aero Bridge, Delhi Metro Rail, Commercial and Residential Multi Story Buildings, Water Tank, Guest House, Domes. Familiar with ISO 9001, ISO 14001 and Safety systems.

Recently I have completed a BSc. in Mechanical Engineering at the Near East University, graduating in 2008, Cyprus.

Fresh Graduate. Civil Engineer. Interested in construction management and structural enginnering.

Proe, autocad.

Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project.

Reinforced Concrete, Steelwork, Structural Timber, 3D structural Modelling

Chemical Process Engineer,Simulation Design, Process Control Automation,Project Development-Conceptual,Feasibility,FEED,Project Mgr,Coordination_EPC,PMC,Licensor,investors;techno economic financial analysis,Mid Downstream Refining, Petrochemicals,Gas Processing/Treatment,Q-HSE,Business Head (P&L)

Construction Manager - Worked as Architect, Interior Designer and Civil Engineer

Application for the Post of Structural Designer/Project Engineer for building structures in your esteemed Company or for any position applicable to my qualifications.

AutoCAD Operator

16 years in Planning/Scheduling/Project Controls for Power/Waste Water/Mining & Metals/Oil, Gas and Petrochemicals projects from concept to commissioning, particularly in multinational, multi cultural and consortium environment in India, Indonesia, Saudi Arabia, USA, Singapore, Bahrain and Canada

I am holding B. Sc in Quantity Surveying from University of Moratuwa, Sri Lanka. I have over eight years employment in the construction industry as a Quantity Surveyor. Employed by International Contractors

Have experience Road Design, MXROAD Software and AutoCAD Software. Total experience 7 Years 11 months in Road Department.

Mechanical Subjects Lecturer & Senior Engineer in an Industrial & Commertial Projects

Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out