Resume - Engineer with well developed analytical and research skills. Possessing expertis...

Misco Jobs

Resume #15824

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual with good organizational and interpersonal skills.

OBJECTIVE:
Expect to work for a company that is impartial and fair to all employees, posses the resources that ensures growth and knowledge in the execution of ones objective. Which is to increase the reliability of load flow data via validation of network diagram, parameters, calibration of load flow programs, stability modules and finally the optimization of contingency analysis and Power flow.

WORK EXPERIENCE:
Generation Technician Engineer, June 2001 - Present
System Planning & Control Division
Jamaica Public Service Company (A subsidiary of Mirant International)

Responsibilities include assisting in designing reports and databases to track critical information such as heat rate, force outages, perform forecasting of daily system load, assist in performing case studies on operational issues, assist in preparing annual and weekly fuel budgets, assist in developing weekly and daily unit commitment schedules, prepare dispatch reports for Independent Power Producers, Utilizes knowledge of Independent Power Producers Contract, Uses SCADA/EMS applications in executing duties, assist in identifying and trending parameters(e.g. Heat rate and forced outage rate)critical to the company's profitability, Update running hours for the generating units and preparing merit orders. The job function also entails scheduling and coordinating of planned outages,

Insurance and claims and also advises Power Purchase administrator on how Independent Power Producers operating.
Presiding officer
General Election 2002
Electorial Office of Jamaica
St. Andrew North Western

Associate (June 2000)
K-Mart
Rio Grande
New Jersy

Associate (June 2000)
WaWa Food Store
Cape May
New Jersy

Assistant Trucker (June 2000)
Sea Shore Foods
Rio Grande
New Jersy

Earn and Study Student (1998-2000)
Marketing Department and Faculty of Engineering
University of Technology
Kingston Jamaica

EDUCATION & CERTIFICATION:
* Bachelor of Engineering Degree (BENG HONS)
University of Technology 2002-2004
* Diploma Electrical Power Engineering
University of Technology 1997-2000
* Certificate Electrical Power Engineering
University of Technology 1997-1998
* Certificate Introduction Micro-computer Applications
Institute of Business and Professional Studies 1996
* Ordinary Level:
Five (5) C.X.C General Proficiency Examination, three (3) Cambridge O' Level and one (1) Cambridge AO' Level Examination at the Titchfield High School, 1990 - 1997

ADDITIONAL INFORMATION:

AWARDS
Part Scholarship from the Jamaica Public Service Company Summer 2004
Bursary from Student Loan Bureau 1999
Other Training and Certification

- Corporate Conduct and Social Behaviour, JPSCo Training Dept.
- Motivation – The key to improved performance and productivity, JPSCo Training Dept.
- International Coaches Clinic 2000, Jamaica Basket Association (J.A.B.A)

EXTRA CURRICULAR ACTIVITIES
Playing Chess, Football, Basketball, Table Tennis, Swimming, Weight lifting, Meeting and Socializing with new people, Public Relation Officer for Portland Basketball Association and also Listening to Music.

SKILLS
With regards to the following, my competence ranges from proficient to very experienced.

Mathematical Programming: Matlab
Traditional Programming: C++
Industrial Programming: PLCs (Programmable Logic Controllers)
Simulation Tools: Eracs Load Flow software, Wescouger Unit commitment and Economic Dispatch Software
Application Software: Microsoft Office
Operating Systems: Windows, DOS

INTERESTS
Artificial Intelligence & Neural Networks
Mind Enhancement
Reading Motivational Materials
Socializing and interacting with people
Playing Chess and Soccer

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 2821)

Go to Search Parameters...

Brief Description

Strong structural engineering knowledge, Energitic, Good analitycal thinking, Self motivated, Hardworking, Dedicated person, Able to work under pressure.

B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.

Accomplished professional leveraging strengths in hydrogeology, geology, geomatics and geotechnical engineering to earn a position on a team committed to making genuine social contributions within challenging, multifaceted environments. Possess an MS in Geology and an MS in Hydrology / Hydrogeology;

Safety Engineer, (NEBOSH) Lifting & Rigging Supervisor, (NVQ 3.)

Have working experience in 6 countries; around 15 years of experience in Project Management, Project Engineering, Engineering Design, R&D, Construction, Technology Management and Business Development. Have extensive experience in subsea/offshore pipeline, cross-

Estimating Engineering for Oil & Gas Projects from FEED to EPC stage.

5 yrs experience in crushing & asphalt operation,maintenance,motor control centre,inventory control,switchgear.

Instrument Supervisor

Junior project manager

Qatar Petroleum

Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual

Mechanical Superintendent

Registered professional geologist - Wyoming (PG-3477). BS and MS degrees in Geology. Work history includes geotechnical engineer/estimator in the construction industry; mine engineer at a bentonite mine, and the following experience as a geologist:

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

Electrical Engineering with knowledge in ultra-wideband amplifier, power system, MOSFET, BJT, 3-phase circuits, and electric drives

Experience work in Overseas

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

International Project, Construction, and Contract Management

Installation, loop checking, calibration and commissioning

Behavioral Based Safety, Ergonomics, Human Factors, and Oil and Gas Construciton Safety Professional

SDS2, Xsteel, AutoCAD Steel Detailer.

ITI in Draughtship

Project Engineer (Instrumentation & Control)

German graduate Structural and Optimization Engineer with 5 years experience in the German industry with a practical experience and familiarity with modeling&optimization softwares(like CASERII,ANSYS,ABAQUS,iSIGHT)

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

I am a highways designer, designed more than 50 link roads, 2000 kms length all over Egypt, Yemen repuplic, & KSA.Using thelatest versions of Autodesk, Also I have a good expeience in the field of design Water & Waste Water networks

Professional Engineer experience in cleanroom design, construction, installation, testing and commissioning of cleanrooms (HVAC and architectural) for semi-conductors, pharmaceuticals and laboratories.

I describe myself as Sincere and perseverance to Hard work. I had completed my Bachelor of Civil Engineering in First Class From a reputed institution in Tamil Nadu, India.

Bridge Design / Bridge Management Sysytem

An electrical engineer, having 4 years of experience in high voltage side and have got testing and commissioning,design and maintenance experience. i am an indian and would like to get an oppertunity in reputed companies.

About 9 years+ experience in cement industry in mechanical maintenance (preventive, predective and corrective maintenance, compterised maintenance system), worked as section incharge for mills,Kiln, energy conservation, costing techniques.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

Geotechnical Engineer

I have recently finished my undergraduate study in Mechanical Engineering, Institute Technology of Bandung, Indonesia. I am looking forward to having a career which has strong relation with my educational background.

Working in the Kingdom of Saudi Arabia for the last 9 1/2 years. Well experienced in the design and execution of all types of HVAC systems, plumbing systems including water supply, Sewage/drainage system and Fire fighting system.

Results-oriented, Construction site Engineer with 7 years of experience in all facets of the Industry. Verifiable track record for successful completion of many projects.

I understand from your advertisement that there are openings in reputed company for various posts with challenging responsibilities. I have special interests in QA/QC and wish to offer my services as QA/QC Manager/ Supervisor.

Quantity Surveyor For Aluminium Facade Work

Civil / Structure Engineer with expertise in Structure and infrastructures for transportation, industrial / petrochemical and mining projects, also has capability in offshore structure design.

Master in Machine Design engg with 6+ Yrs of Exp in design,Developement & Reverse engg of machine elements and Design Support for Onsite clients.

Skilled technical SalesProfessional with International business Development experience in over 17 countries

My objective is to acquire my Associates degree in Engineering Designing Graphics, learn marketable skills, and to utilize these skills in this field. These skills would include designing new homes and reconstructing commercial buildings.

Being in one of the best Civil Engineering School in France (ESTP School), I believe my two years experience/education in Civil Engineering, coupled with my drive and enthusiasm, would enable me to make a significant contribution to your company.

MS Office, Diploma in Mechanical Engineer

Structural Designer / Draftsman

I hold a Bachelor of Science degree in civil engineering and have over 8 years experience in the design of concrete and steel structures.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out