Resume - Good in AutoCad, 6 years experince in 4 shipyards with main activity shipbuildin...

Misco Jobs

Resume #17264

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE

- 2004 to present day -Maas-dok Scheepswerf Maastricht and Dodewaart Sheepswerfen from Holland –Engineering and Technical Department, (Self Employed).
- 2003 – ISRAEL SHIPYARDS Ltd. Haifa – Engineering (Design) Department.
- From 1999 until 2003 - AKER SHIPYARD SA Braila – Engineering Department and Assembling Department.
Good experience as designer (over five years) in two departments, Hull Design and Mechanical, and three companies from – ISRAEL, The NETHERLANDS and ROMANIA.

MAJOR ACTIVITIES AT ENGINEER.
2004 to present day– Maas-Dok Sheepswerf and Dodewaart Sheepswerf (NL).

–Technical coordinator of Dodewaart Sheepswerfen. Supervising of shipbuilding process, find and provide solutions in execution problems, keeping of permanent connections between Engineering, Supply and Cutting Department with foremen's and our clients, Supervisor of Cutting Department.
–Project "TMS Hanse" 110m (Dodewaart Sheepswerfen), technical and workshop documentation plus cutting, shaping and bending information of plates and profiles, supervising the fabrication process.
–Project "Chemical Tank Angelika" 110m (Maas-dok Scheepswerf Maastricht), technical and workshop documentation plus cutting, shaping and bending information of plates and profiles, supervising the fabrication process.
–Project "EIL TANK 45" (Maas-dok Scheepswerf Maastricht), for REEDEREI JAEGERS Ltd., technical and workshop documentation plus cutting, shaping and bending information of plates and profiles.

2003 - ISRAEL SHIPYARDS Ltd. Haifa.

– Project Offshore Patrol Boat (60 m) under Germanischer Lloyds Register supervising –for Greek Army - Hull workshop drawings, design for alteration (owner requirement) and designs for foundations. The final documentation (workshop drawings) has attached supplementary information, ex: cutting documentation, typical details for welding or assembling, material list, necessary of materials.
- Accommodation department, design for insulation & fixing on board equipment's for navigation and communication.
- Mechanical department, HVAC plant and ventilation, design for routing of AC and ventilation ducts, dimensioning of this, including design for different mechanical parts.

From 2000 to 2003 - AKER SHIPYARD SA Braila.

- 2002 - Project "ROV" – "SEAWAY PETREL" - Purse seiner / Pelagic Trawler, for Aker Brattvaag. Compile the technical project for double bottom, fore side mid ship section and super structure including the wheelhouse, sending documentation for approval and correlated with the register remarks (D.N.V. office).
- Project "Grab Hopper Dredger 300 m3" – "DIYA KOWULLA", prepared for Sri-Lanka Port Authorities. Compile the technical project for double bottom, fore side and super structure, sending documentation for approval (Lloyd Register) and correlated with the register remarks.
- 2001 - Project "Hopper Dredger with aspiration 3000m3" – "MELINA TJUCHEM", for IHC Holland. Compile the technical project for double bottom with bottom openings, fore side and super structure including the wheelhouse, sending documentation for approval (Lloyd Register and I.H.C. Holland) and correlated with the register and owner remarks.
- 2001-Project - Brevik 21 (WAVENEY CITATEL), Brevik 22 (HAVILA SURF) and Brevik 23 (FAR SWIFT) - Research-Supply Vessel with cement tanks. Complete the workshop documentation per blocks (ex: fore side, wheelhouse), materials consumption (plates, profiles), calculations of weight for parts or center weigh for every part and blocks, welding details.
- 2000 - Design for replacement of fore side at Cargo Vessel - "Sereen" (transformation from 1500 tdw in 1800 tdw - and many structural modifications for coupling at old aft side with new fore side).
- 2000 - Projects Noryard 42 (REGINA C.), Noryard 44, Noryard 45 (ATLANTIC ENTER PRISE) - fishing vessels, for Aker Kvaerner. Complete the workshop documentation per blocks (ex: fore side, wheelhouse), materials consumption (plates, profiles), calculations of weight for parts or center weigh for every part and blocks, welding details.
Find and provide solutions in execution problems –modifications, remediation in according with naval register.
Ensure technical support including materials consumption (plates, profiles), calculations of weight for parts or center weigh for every part, blocks and ship, welding details, manipulation of the blocks, technical advise for execution.
I can determine how we will fix the difficult areas, connected on design problems and execution in according with the society of classification rules, owner requirements and operating personnel.
I also supervise how is laying out, positioning and build every metal-structural parts within the hull of ship (plates, web frames, decks beams, bulkheads etc.).
Ensure a link between Design Departments and DNV (DET NORSKE VERITAS), BV (BUREAU VERITAS), GL (GERMANISCHER LLOYD), LR (Lloyd Register) inspectors, or the other naval register.

1999 to 2000 - Mechanical Engineer–Assembling Department, Aker Shipyard Braila.
My main duty was to organize building site, to assure if the materials and draws are good and properly, to start assembling. Supervision of assembling operation, including technical support.

EDUCATION

- 2001 - AutoCAD Designer Degree - training by AutoDesk Romania
- 1994-1999 - NAVAL Faculty, "Low Danube" State University from Galatzi, Romania. Graduation Studies, 1999, Naval Architect Male (5-yr Degree)
- High School "Radio & TV" - Braila, Electronically Branch, 1990-1994. Bachelor Degree in 1994.

COMPUTER LITERACY

Using very good AutoCAD (any version of AutoCAD) authorized training by "AutoDesk Romania", MasterShip all versions, Windows 98, 2000, XP or NT WorkStation, Microsoft Office Pack (WORD, EXCEL), Internet Explorer, Smart Team (Project Data Manager).

MARKETABLE APTITUDES

Ability and aptitude for rapid learning and adjustments. Can work alone but enjoy teamwork. I am disciplined and I like to do my work. I enjoy being exposed to different working situations. Able for good working in stress and under pressure.

FOREIGN LANGUAGE

Romanian: native
Good knowledge in English; understanding, reading and speaking.
Minimal knowledge of German language.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 2811)

Go to Search Parameters...

Brief Description

B.E. (Mechanical) with Piping Engineering from Indian Institute Of Technology, Mumbai.

Good in AutoCad, 6 years experince in 4 shipyards with main activity shipbuilding and repairing, youg, able to lear and fast adapting in diferent conditions.

Telecommunications Engineer, with Bsc. In Telecommunications and Electronics, present occupation on Telecommunications Network Resource Management, Planning & Design Telecommunication Circuits Serving Electrical Networks. Consultant Engineer: Alarabi Engineering Consultants.

Senior Electrical Engineer with over 20 years of manufacturing, industrial, chemical, and power plant field experience.

Industrial automation with specilisation in RTU, PLC, Testing and commissioning of MCC, PCPwith sound knowledge on embeddedsystem, RTOS-VX WORKS

Educated to a high level with well developed interpersonal skills. A proactive, result orientated style of working, is supported by a broad range of practical skills and knowledge. A keen sense of self worth and ambition are tempered by a proven ability to achieve within a professional environment.

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

My experience is mainly on industrial, oil & gas, petrochemical and infrastructure projects in India and Saudi Arabia. My qualification is a Masters degree in Construction Engineering & Management and i have for over 10 years of experience working on projects with multi-national companies.

Masters Degree Construction Management / Experience on Multi-Billion Dollar Greenfield Projects / Russia Experience / Civil Field Engineering / Contracts Supervision & Administration / Field Supervision / Construction Management / Scheduling / Estimating / Specification and Procurement of Materials

Rotating & reciprocating equipment technician

Building Seismic Design , Evaluation of Structures, Bridge Design

design construction, budgeting, drafter, supervisor

I am an engineer holding a university degree (B.Sc) in electrical engineering Aden - Yemen, I have 8 years experience, 5 years in electrical & electronics maintenance and 4 years experience in a Company in Saudi Arabia has Industrial agencies responsible of after sales services

• High financial and numeric ability, establishment of policies and guidelines, playing many strategic roles for Multinational Companies’ Branches in Ecuador, South-America (+15 years)

Civil Engineering graduate with over 16yrs of experience in Civil Works (12yrs in Middle East) with a versatile potential to utilize & develop the vast experience gathered in the field of pipelines & infrastructures, dedicated to contribute the best efforts for growth of the company.

T/A Siemens, Kawasaki, GE, Solar Turbines, Startup Manager, Operations, Combine Cycle

Experienced Project Manager/ QC / Controls Manager

Engineering Graduate in Safety and Fire having 3+ Yr Experience. Skills:Risk assessment,Safety Management,Safety Engineering,Hazard Control,Fire Engineering,Design etc

Project Management. Scheduling, Ms.Project, Primavera, Budgetting. Engineering. QS, AUTOCAD, Structure Analysis, SAP2000, Site Engineer.

Instrument Engineer with 12 years experience

GSM/CDMA Project Manager

Responsibilities and Experience :

Installation and commissioning, project management

Instrumentation Field Engineer

Civil Engineer with Project Control experience and knowledge of Primavera (P3)

Certified General Contractor, Concrete finisher, Underground Utillities, Reliable, Creative,dependable

I have skills in project manage ment in: Aviation,Defence Telecommunications, Materiel Maintenance and Logistics.

Site Engineer, Operations Control SPecialist, BAggage Attendant, Buyer

Florida P. E. No. 54962 & Texas P. E. No. 29648; Degree: Bachelor of Science in Civil Engineering - University of Texas, El Paso; Graduate Studies: 12 Hours-Civil / Ocean Engineering - University of Houston; Languages: Fluent in English and Spanish; Beginning French and Arabic

Project maintenance manager/planner/trainer

Seasoned Project Management professional with significant field experience in Civil construction projects including Quantity Surveying. Background includes successful execution of bridge & industrial building project. Solid leadership, teamwork and project management capabilities.

B.Tech-Mechanical Engineering, CSWIP-3.2 Senior Welding Inspector and LEAD Auditor-ISO 9000 having a 16 years experince in various levels in EPC projects ion Oil.GAS, Petrochemicals,Refinery and Pipeline in India, UAE,Nigeria, Saudi Arabia and Qatar.

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

Registered Electrical Engineer and trained Quantity Surveyor, able to combine technical knowhow with commercial understanding into Quantity Surveying, Estimating and Sub-contract Administration

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

NEBOSH level 6, NEBOSH Level-3, IOSH Managing Safely, Diploma in Fire Engineering, Diploma in Industrial Sfety

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

I have 30 safe Years as a Manager, Engineer type,Supervision, Safety, and a Heavy Crane Operator that excels working on Lift Studies, Safety, Meetings, Man Power, Crane Assembly/Dissemble/Boom Changes, and written Lift Procedures.

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

Civil/Structural Field Engineer. Construction Management with large EPCM projects

Experienced in design & engineering - feasibility, conceptual study, basic and detail engineering, project management(EPC,EP,MC,PMC), proposal preparing, in the field of oil and gas and petrochemical industry

I am working as an instrument technician in KSA through Al-Hugayet contracting Est. since January 2000. My job includes Installation, commissioning and Maintaining Process Control Instrumentation, associated with Oil, Petrochemical, Polymer, Packaging Lines with 10 years Experience.

Diploma in Mechanical Engineering

I am graduate and have a diploma of instrumention and process control with 9 years exp in diffrent industries

Facility Manager

Instrumentation, Automation, control & electrical engineer with 3 years experience

My skills and qualification are exemplary

1991-2002 : Diploma in Building Services Engineering Place : Shah Alam Polytechnic CGPA : 2.85 out of 4.00 1997-1998 : SPM Place : Sekolah Menengah Teknik, Kuala Terengganu Grade : Grade 2, 31 Aggregate

PLC/FPGA Process Controls Electrical Engineer Allen bradley and Siemens architecture proficent with Control Logix Design Experience.

Peter is a highly experienced environmental engineer with significant expertise in oil, gas and mining, regulatory issues, sustainable development, corporate social responsibility and policy development. He is a Chartered Engineer (CEng, MICE), and an Environmental Professional (CEnv, MIEMA)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out