Resume - Diploma In Instrumentation Engineering + AMIE Eqvt to B.E

Misco Jobs

Resume #21005

CONTACT INFORMATION:
View contact information...

Sr Off-shore Instrumentation Engineer (I&C)
Location: Malaysia Country

DETAILED CV BELOW
Languages Spoken: English, Hindi
Current Position: Sr Instrumentation Engineer ( Detail & Design Engg.)

WORK EXPERIENCE:
* Total 18+ years experience

1)Diploma in Instrumentation Engineering in Aug 1988 ( 3 Years full time )
2)Completed AMIE eqvt to B.E. Degree in September 2000.
3)Knowledge of computer applications.

Technical and Operation: Total 18+ Years experience

Working experience in detail as below with following process plant.
1)DM water and effluent treatment plant.
2)Large Thermal power plant.
3)O N G C. Off-shore platforms and plants.
4)Refinery plants i.e. Hydrogen generation unit, reformer, HCU, CDU, VDU, DCU, SRU,
CPP plant. Process plants etc.
5)Off-Shore Process Plants / F P S O and Biodiesel Plants

Working field experience in brief as below:

Experience in with good knowledge of Detail Engg. Field Instruments And Inline Instruments Selection and Sizing along with preparing, Referring and reviewing the Engg / vendor documents for all applicable field instruments of the process plants instrumentation with PLC and DCS/ ESD System and control panels. Also preparation of interconnections diagrams for control panels, field instruments and equipments for the plants with the help of INTERGRAPH INTOOLS, SPR, PDS, MICROSTATION, EDMS and Infoworks etc, software applications tools and operating Systems.

Working experience on Intergraph INtools, SPR, PDS, Microstation, EDMS
and Infoworks etc, softwere operareting Systems with the Engg consultant Cos
.
Also having solid hands on experience in Erection and Commissioning of the process plant instrumentation systems including loop checking with DCS/ESD panel and checking the interlocking and trip logics of the process plant etc and thus running the plant after successful commissioning.(G T R )

Also experience in revamp project works execution with consulting co.

Working and Commissioning knowledge on PLC's and DCS systems i e. DCS -Yokogawa, YBL centum Xl. Centum CS-3000
PLC - Allenbradley, Triconex—1131 V2, Siemens – S 7

I have independently worked for the Numaligarh Refinery plant, NRL (Assam)
and at Barauni Refinery plant, I O C L ( Begusarai, Bihar) in INDIA for the turnkey projects of M/S LARSEN AND TOUBRO LTD GR II an EPC Co at Mumbai.

As well as Abudhabi ADNOC SRU Refinery project at RUWAIS ( U.A.E. ) and in KSA, Jeddah for power project of ABB SADELMI (Shoaiba) and SWCC water transmission plant in ABROAD.

The company represented and worked for are as below in detail
1)Plant And Offshore Technology Sdn. Bdn. Project Detailed Engg.
Consultancy for Oil Fab Sdn. Bhd. along with Carigali-pttepi Operating Co.
(CPOC) a Petronas Co. As Sr. Instrumentation engr. In Engg Design Dept
Since June 2007 To date Continued Presently.at Kelana Jaya in Malaysia ( K L )

2) Bechtel India pvt Ltd ( a leading Multinational EPC / Engg. Consulting co.)
at GURGAON in Design Dept on contract employment as Sr. Instrumentation engineer for Detail engg since 16th Jan 06 to 23 March 2007. ( End of contract Term of 1 year )

3) Worked for AKPG Engg a Consulting co in Mumbai From Jan 2004 to10th Jan2006

4) Tata Consultancy Engineers Ltd From 6/1/2002 to 9/12/2003 as Instrument engineer.

5) M/S Carlo Gavazee Arabia Co Ltd. ( Saudi Arabia, Jeddah ) From 29/07/2000 to 24/02/2001 as Instrument engineer in Engg Divn.

6) Kushal engg. enterprises.. > From 15/6/96 to 30/6/2000 as Site engineer ( E & I )

7) Keystone valves India pvt Ltd. > From 23/1/95 to 7/6/96 as Sr. Instrument engineer.

8) Oil and Natural Gas Corporation. ( O N G C Offshore ). > From 21/8/90 to 22/1/ 95 as Junior Instrument engineer.

9) Classic engineers for (O N G C Offshore ) > From 9/12/89 to 7/7/90 as Junior engineer

10) Elder indl. inst. pvt. Ltd. > From 1/9/88 to 6/12/89 as Instrument engineer

Supervisory / Management / Computer:
1) Experience in supervisory activities
2) Working experience with managerial group and system of the company.
3) Working experience with computer applications.
4)Creative and Analysing skills.
5) Capable of Performing as Team / Group Leader of team work assigned.

Working experience with Multinational company in India and Abroad as listed..

Creativity on the basis of experience and ideas.

Independent project work Execution and Commissioning is the main achievement.

Working field experience in details as below:

1)Plant And Offshore Technology Sdn. Bdn. ( A Leading EPC Consulting Co.)

Sr. Instrument engineer for the Detail engg of Topside Well Head Platforms
(Carigali-pttepi Operating Co. (CPOC) & FPSO OYO (Nigeria)
with Bumi Armada Co's Project in Malaysia ( K L )

From 5th June 2007 Till Date. Continued Presently. at Kelana Jaya in Malaysia ( K L )

The job involves All applicable Detail engg for the Instrumentation systems alongwith all field instruments And Inline Instruments Selection and Sizing for the Offshore Platforms, Preparing all spec and Datasheets for the Instruments, preparing PR, Doing TBE and Techno commercial Meetings with various Inst Related Vendors for the all applicable instruments, referring and reviewing the engg / vendor documents JB wirings Diagram, Inst. Hookups, MTOs For Cable, cable trays Tubes and Fittings and JBs for all applicable field instruments, PLC and DCS loops and interlocks of the process plants.
Also control loop checking and reviewing w.r.t P&I D for Control system with DCS/ESD panel and checking the interlocking and trip logics of the process plant etc.
Also reviewing and Approving the vendor's documents for all inst. For the project and systems along with distributed control systems (DCS), Emergency shutdown systems (ESD),
F & G Systems, telecom and public address equipment and outstations, etc, cable laying, earthing, lighting and small power, field instruments such as emergency shutdown valves, control valves, safety relief valves, flow instruments, level instruments, pressure & differential pressure instruments, temperature instruments etc.

2) Bechtel India Pvt Ltd. ( A Leading Multinational EPC Consulting Co.)
Sr. Instrument engineer for the Detail engg (GASCO OGD-III Project, Abudhabi UAE.)
From 16th Jan 2006 to 23 March 2007. ( End of contract Term of 1 year )

Preparing / checking engineering drawings, Detail engg. includes preparing, referring and reviewing the engg / vendor documents for all applicable field instruments wrt P & ID of the process plants instrumentation with PLC and DCS/ ESD System and Control Panels.
Also preparation of interconnections diagrams for control panels, field instruments and equipments for the plant with the help of INTERGRAPH INtools, SPR, PDS, Microstation, EDMS and Info works etc, software applications tools and operating platforms. instrument data sheets, Specifications, and handling requisitions of materials / equipment, vendors bid evaluations, Preparation of subcontract packages, etc. with the help of Intergraph INtools, SPR, PDS, Microstation, EDMS and Info works etc, software operating Systems.

2) Aker Kvaerner Power Gas Ltd, An Engg MNC Consulting Co.

Instrumentation engineer ( E & C + Detail engg. ) of various process plants.

From Jan 2004 to 10th Jan 2006 (2 Years)

The job involves Detail engg, Preparing, referring and reviewing the engg / vendor documents for all applicable field instruments, PLC and DCS loops and interlocks of the process plants.
Also control loop checking and reviewing w.r.t P&I D for Control system with DCS/ESD panel and checking the interlocking and trip logics of the process plant etc.
Also reviewing the I &C works covering control/ telecommunication systems along with distributed control systems (DCS), Emergency shutdown systems (ESD), F & G Systems, telecom and public address equipment and outstations, etc, cable laying, earthing, lighting and small power, field instruments such as emergency shutdown valves, control valves, safety relief valves, flow instruments, level instruments, pressure & differential pressure instruments, temperature instruments etc. working experience on INTERGRAPH INtools, SPR, PDS, Microstation, EDMS and Infoworks etc, software operating platforms

3) Tata Consultancy Engineers Ltd (Mumbai)
Instrument engineer Revamp project work. ( Detail engg. ) ( Cabbot India. Mumbai)
From 6/1/2002 to 9/12/2003 (1 year and 11 months )
All field instrument and control panel wiring diagram and interconnections of the equipments for the pumping station. Preparation of interconnections diagrams for control panels, field instruments and equipments for the plant. Also loop checking with DCS/ESD panel and checking the interlocking and trip logics of the process plant etc.
Preparing the engg. docs for revamping works by referring and reviewing the engg / vendor documents for all applicable field instruments, PLC and DCS loops and interlocks of the process plants. Also associating in technical bid evaluations, following-up on placement of orders and vendor document approval, monitoring vendor progress, Coordinating and resolving engineering / vendor / client queries, liaising for inspection / release of materials, expediting with vendors for delivery of material, preparing project method statements and procedures, issuing fabrication and "AFC" drawings to site, monitoring progress of work at site,
Preparing mobilization plans for vendors for installation / commissioning at project sites, work packs and micro-schedules for site activities, monitoring the execution of additional works, documenting contractual variations and changes to scope, Reviewing and compiling vendor As-built documentation / manuals and compiling final documentation for the project. working experience on INTERGRAPH INtools, SPR, PDS, Microstation, EDMS and Info works etc, software operareting Systems.

4) M/S Carlo Gavazee Arabia Co Ltd. ( Saudi Arabia, Jeddah )
Instrument engineer / Supervisor ( E & C + Detail engg. )

From 29/07/2000 to 4/02/2001 ( 7 months ) ( N O C Given by co.)
Erection & Commissioning of the instrumentation system in power plant of ABB
SADELMI. Also instrument lab work, project execution and man power management. control / MCC panel installation and inter-connection wirings with inst. JBs and DCS panels. loop checking of the same. Also worked with Snamprogetti-Saipem joint venture in engineering design department as an Instrument engineer for Shoaibah-Jeddah water transmission system and fuel pumping station for the S W C C Organisation.
The job involved preparation of the terminal strips, control panels wiring diagram with respect to Data Aquisition and Control (DAC) system, P & I D, instrument data sheets and wiring diagram of plant equipments and instruments ie LV / HV panels, motors, LCP of pumps. Also all field instrument and control panel wiring diagram and inter- connections of these equipments for the pumping station. Preparation of interconnections diagrams for control panels, field instruments and equipments for the plant. Also loop checking with DCS/ESD panel and checking the interlocks and trip logics of the process plant etc. Solving the technical queries and existing problems related to plant equipment systems.
and Simplex make. Yokogawa DCS and PLC etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 3123)

Go to Search Parameters...

Brief Description

5 Years Strong experience in Site Execution, Project Management

Current position: Senior QA/QC Engineer and Senior Project Engineer ( Civil Infrastructures ), Through knowledge of Qatar Petroleum (QP) standards , policies and procedures.Over 19 years of experience with reputable consulting and contracting firms in Qatar, Dubai, and Jordan

20 Years experience in Architectural, Structural detailing, Interior designing, Quantity Serveying & Shop drawing etc. Specialized in fillar slab (Italian technology). Operate Auto Cad, 3dstudio max and Photoshop

Concrete and Materials Engineer, expert in concrete design and materials selection, qulaity control and assurance, worked in various mega projects with MNCs.

Primavera Project Planner (3) and Primavera Expedition Courses PPL Tehran Iran

Extensive experience in Quantity Surveying/Estimating in diverse environments. I relish undertaking challenging assignments and desire to lead a project to successful fruition. Firmly believe that my involvement in any assignment will add value to the project

Civil Engineer / Contract Engineer

Senior Project Manager

Sr. Document Controller

I completed Master from Aligarh Muslim University in 2003 securing 71% marks in Applied Geology and presently employed with Hyder Consultancy Middle East Ltd. Abu Dhabi, UAE as a Geotechnical Engineer. I have more then Five and half years experience in the field of drilling, water exploration and ge

Seeking to apply my skills as a Planning & Scheduling Manager; QA/QC manager; Document Control Manager; Assistant Project Manager; Superintendent; Consultant. Great organizational and computer skills. MS Office, Excel, Word, MS Project, P3, Project Manager, and more.

I would like to apply for a permanent job position in Construction Engineering and Project Management to solidify and enhance my qualifications. Roles could include Project Planning, Scheduling and Controls, Quality and Safety Controls.

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Quantity Surveyor having more than 15 years experience

A technical support/customer service position where my skills of problem-solving and analysis will result in profitability and retention.

Work experience: 7 Yrs. University degree :Bachelors in Mechanical Engineering .Professional certifications : CSWIP 3.1 Welding Inspection Certification ,NACE Level II in Painting & Coating Inspection, ASNT level II’s in the RT/ UT /MPT/LPT & Lead Auditor ISO 9001 : 2008 ,

Expert Layout Designer of PCB, HMC and 3D Packages using VISULA Layout Edit, CADStar, OrCAD and AutoCAD. Experience in Production of PCB, HMC and 3D Packages.

I am working since 22 Years - 9 Years in Karachi - Pakistan and since last 12 Years I am working in Saudi Arabia as a Quanity Surveyor.

I am a Canadian citizen having 17 years solid building construction, Civil and structural design, quality Management, project management, construction Management. a dedicated team player/leader exhibiting a high level of energy and initiative under pressure.

QA/QC procedures, quality management system, administration and Developing Database in (MS Access) to control documents.

Diploma In Instrumentation Engineering + AMIE Eqvt to B.E

i am working as an electrical site engineer in ETA at dubai.I am working in dubai metro project.

3 years of professional experience (after Post Graduation) in Highway Engineering (Expressway, National Highway, Hill Roads etc.).

Proe , Autocad, Unigraphics (Modeling,Drafting,Assmbling)

I have spent nearly four years as a Geotechnical Engineer and have gained an immense variety of knowledge from running numerous and varied site investigations, which has given me strong skills in writing interpretive ground investigation reports for foundation design and slope stability, supervising

Structural engineer with 4 years experience and Master of Science in Construction management.

I am an architect and urban designer practicing in the Middle East for over thirteen years. I have held design and project management responsibilities at senior positions with international British consultants and Government organizations wherein I handled wide range of building types such as commer

Civel engineer ,with a experience of 8 year in highway construction

Proficient in Microstation,Autocad,Photoshop,and Corel Draw.Knowledgeable in HVAC plans, architectural plans, structural plans.Proficient in English.Time Management, Teamwork, Team Building and Management, Motivation.

SCADA, DCS, CCMS, BMS, DDC, power, lighting, grounding, ...

Masters degree in Highway/Structural engineering, 14 years of professional experience - working in the department of roads, good skills in CAD application (eg. SAP2000) and other computer applications (eg. spreadsheets)

Presently I am working in Saudi Arabia. I have nearly 17 years experience. From 1996 November I am using Microstation. I can work in Microstation & AutoCAD. I have experience in AutoCAD 2006 from my personal PC. Mainly I am working in architectural discipline. I can do structural & civil work also.

Mechanical Engineer having 14 years of experience in the field of construction in Refinery, Petrochemicals & Power plant mainly focussing on Piping, Reformers & Heaters. Has been worked with major international companies like TEchnip, Technip KTI etc.

Dear Hiring Manager

cv for civil foreman

Innovative career in the field of electrical power engineering: Installation, Service and Commissioning

B. Sc. in Civil Engineering, 6 years in ERicsson & Nokia, Construction, QA, Documentation, Telecom power management

Fully equipped Mechanical Engineer doing Quantity Surveying

I have more than 6Yrs Exp. with oil and gas field on piping work like Installation,Spool fabrication,Hydro testing,Red line and Asbuilt making,Pumb house,Tie-in area, Receving basin area,etc..work in Abroad and India,

Over 14 years working experience 3 years experience in design office and 11 years experience in the construction and supervision of major prestigious international projects .

An engineering position in the emphasis of tool design, opto-mechanics, manufacturing, liaison, stress analysis, aircraft interiors or structures.

13+ years geological/geotechnical/GIS international hands-on experience in the construction & energy industries. MSc/BSc/PgD in the geosciences. Excellent software skills. Contractual or permanent post sought. Available now.

I have extensive hands on experience of more than Eight years, including Six years in the Middle East, in the field of Mechanical Engineering for Building Services, working with reputed Engineering and Consulting Services houses in KSA and UAE.

Site Engineering, Autocad & Estimate

•Experienced Mechanical Engineer with over 8 years experience in HVAC Engineering.

17 years in the field of construction, Experience Architectural Works and Interior works in the construction of the following building such as: Five Star Hotel, Convention Center<Condominuim, High rise Offices, Commercial and residential ,Civil Defense Mass Rapid Transit and chemical Plant.

•Strong knowledge of engineering design principals and methods necessary to adequately dimension and detail complete design concepts. •A thorough knowledge of mechanical, pneumatic, hydraulic components and electrical systems. •Experience with Classification Society Rules and Regulations.

ENGINEERING MANAGER / CIVIL ENGINEER Specialized in Tunneling utilizing EPBMs and SEM / NATM. Holding a Masters Degree in Civil Engineering with 8 years experience in working overseas for leading Construction Contractors, 6 years in tunnelling.

Project Engineer To be a member of a company that designs and builds large offshore and multi-purpose projects. Interests: Hydraulic Structures and Pipelines – Project Execution and Construction Management.

Senior Construction Project Manager

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out