Resume - To peruse the growth enrichment of career in envious of professional with an emp...

Misco Jobs

Resume #2148

CONTACT INFORMATION:
View contact information...

     Date of Birth     26-06-1977

Domicile          Punjab

Qualification:

     Degree/Certificate     University / Board     Year

     Metric             B.I.S.E         1993

Fsc             B.I.S.E 1996


B.E (Civil) National University of 2000
Science & Technology
                     (NUST)
             MCE Risalpur

Experience # 1:

4 Months

Organization:

With one of the famous organization of Pakistan Army Frontier Works Organization (FWO).

Projects:

WASA PROJECTS LAYING OF WATER SUPPLY ( UPTO 24” ) & SEWERAGE PIPES (UPTO 56” )

RUNWAY REHABLITATION OF BHAGHTANGWALAH FAISALABAD .

ROAD’S REHABLITATION PROJECTS OF FAISALABAD (FRRP).

Duties:

1.    Site Supervision laying of Pipes of Sewerage & Water Supply.

2.    Supervision of all material Tests in Laboratory.

3.    Checking Causes for the Cracks of Roads

4.    Design JOB MIX FORMULA for Roads (Based on AASHTO).

5.    Checking Causes for the Cracks of Roads

6.    Quantity Surveyor.

Experience #02:

1 Year & 9 Months

Organization:

With one of the famous Consultants of Pakistan Designmen Consulting Engineers (Pvt) Ltd Islamabad .

Projects:

DESIGN OF NEW HYDEL POWER SECHEME AT MANGLA. (88 MW)

DESIGN OF INFRASTRACTURES E -11 SECTOR OF ISLAMABAD.

DESIGN OF INFRASTRACTURES OF ARMY OFFICERS HOUSING
SECHEME ASKRI-X RAWALPINDI.

DESIGN OF INFRASTRACTURES OF ARMY OFFICERS HOUSING SECHEME ASKRI-XI RAWALPINDI.

DESIGN OF STRACTURES OF SEMIDETACHED HOUSES FOR ARMY OFFICERS HOUSING SECHEME AND COMMERCIAL PLAZAS PARTIALLY.

Duties:

DESIGN OF NEW HYDEL POWER SECHEME

1.    Design of gross head from Jehlam River.

2.    Decisions of best placement of Tail and Head Race at available creeks of the river.

3.    Design of Tail Race Canal.

4.    Design of Power Canal

5.    Discussions about design with Vice President of Harza one of the best company for Hydel Power Schemes of the world (USA Shakago) and take approval from him.

DESIGN OF INFRASTRCTURES

1.    Design of water Supply System for Whole Colony or Sector with Details.

2.    Design of Sewerage Pipe System for whole Colony or Sector with Details.

3.    Design of Surface Drainage System for Whole Colony or Sector.

4.    Supervision Of Water Supply & Sewerage Pipe System.

5.    Design of Roads Structurally and Geometrically (Pavement Design ,L-Section ,X-Sections).

6.    Prepare the BOQ of all Infrastructures.

MANAGEMENT OF PROJECTS (To Save Cost And Time )

Management of New Bong Hydel Secheme (Near Mangla) (Cost 28 Million $).
Management of Drainage System of Faisalabad (Cost 28 Million Rupees).

EXOERIENCE #3:
5 Months To Date

ORGANIZATION:

With one of the famous Consultants in Engineering Field of world NESPAK.

Project:

A World Bank Project
Community Infrastructures Services Programmed in AJK .

Duties:

1.    Best Routing of Water Supply And Sewerage Pipes Network in the Rural Hilly Areas and urban with necessary Civil Structures.

2.    Design of Water Supply and Sewerage Pipes Network and

3.    Design of Roads in Structurally & Geometrically.

4.    Prepare the BOQ of all Infrastructures.

DESIGN QUALITY:

PAVEMENT DESIGN BASED ON AASHTO STANDARDS,BRITISH

STANDARD,AUSTRALIAN STANDARDS.

WATER SUPPLY DESIGN BASED ON SOFTWARE LOOP & BRANCH AND ON NATIONAL STANDARDS

SEWEAGE ON NATIONAL STANDARDS

DESIGN STANDARDS:

ROADS
ASSHTO ,BRITSH ,AUSTRALIAN

WATER SUPPLY

PUBLIC HEALTH ,NATIONAL MANNUAL REFENCE ,ARMY HOUSING STANDARDS,W.R.STEEL.

SEWERAGE STANDARDS

PUBLIC HEALTH ,NATIONAL MANNUAL REFENCE ,ARMY HOUSING STANDARDS,W.R.STEEL.

COMPUTER LITERACY:

MS-OFFICE            AUTOCAD 2000
MS-PROJECT        LOOP
BRANCH            3D HOME
HEC-RAS            STAAD-PRO

PROFESSIONAL SOFTWARES:

Water Supply Design              LOOP,BRANCH
Management Software             MS-PROJECT
Road Design             Road Cal
Home Designing              3D HOME
Drafting Software              AUTOCAD200
Design of Canal & Water Surface Profiles HEC-RAS
STAAD-PRO
Road Pavement Design         Road Cal

HOLDING SOFWARES:

LOOP            BRANCH        SEWER
MS-PROJECT    3D HOME        HEC-RAS

LANGUAGE PROFICIENCY:

English             (Fluent in written & spoken )

Urdu                 (Fluent in written & spoken )

CAREER OBJECTIVES:

To peruse the growth enrichment of career in envious of professional with an emphasis on computer based “Planning & Construction Management”

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 3113)

Go to Search Parameters...

Brief Description

worked in the Middle east on Power plants for 2 and a half years, stat generator sets

Skilled Senior LEVEL II RT Technician with 30 Yrs experience

Having 7 yrs of experience in petrochemical industry as plant operator and commissiong shift leader.

B.E. in Electrical, having basic knowledge in Embedded Systems, Robotics, Matlab, Simulink, Autocad, C++

EDUCATION: „h Govt. Polytechnic, Rajkot D.E. (Civil) WORK EXPERIENCE: „h 6 Year experience as a Site In charge (Construction Project) at Backbone Enterprises Limited, Ahmedabad

Geotechnical Engineer, foundation settlements, reclamation, interpretative and factual report writing

Seeking a responsible and challenging growth oriented position in the field of electrical engineering with emphasis on high voltage out-door substations including its preliminary design, selection of transformers, switchgears and other materials

Civil / Structural Engineer with various international exposure on Power Generating structures, knowledgable with design and detailing software such as StaadPro. and Tekla Structures.

Plant Manager, Quality Manager, Industrial Engineer

Associate Mechanical Engineer, Plumbing Design, Applications, Process, AutoCAD

Junior Mechanical Static Equipment Engineer

Project Manager or Owner Representative. Over 25 years of experience in Industrial Instrumentation and Controls (I&C) engineering, construction, commissioning, start-up, operations, maintenance and training in a variety of industries. Project Management Professional (PMP) Certification #1200696.

Over three years of experience in the application of earth science engineer expertise in the areas of Geomechanics, computer modeling using finite element modeling tools, site stabilization, expansive soils evaluation and treatment, soil/rock mechanics laboratory testing including procedures, quali

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

D/MAN CIVIL., AutoCAD2D & 3D

Over 15 years of rich experience in Project Execution & Management, & Engineering in oil and gas.

PRO-E DESIGN ENGINEER

Condition Monitoring Technician - Vibration Analyst Cat III (ISO 18436.2 2008) 15 years experience. CSI and Bently VA products, Fixture and Pruftechnic Alignment experience, Flir Infra red camera experience. Mechanical Commissioning Supervisor - Nickel project 10 months)

I am a fresh B.Sc Electrical & Electronic Engineer.I am a citizen of Bangladesh.

To peruse the growth enrichment of career in envious of professional with an emphasis on computer based “Planning & Construction Management”

New Graduate looking for a entry level position.

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

Inspection of piping.pipelines,offshore structures,welders qualification,pqr,internal audits,quality plans review,test packs review.

Project Management, Senior Mechanical Engineer, Mechanical & Piping Supervisor, Design Engineer

10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St

BS Mech/Indust Eng. Trade qualified: Marine Eng & HD Mech. Member: "Intl Assoc Airport Executives (Can.)" & "Inst of Transportation Eng (Can.)" Extensive o/seas experience as project engineer in frontier/conflict regions.

Site COordinator having 5+ yrs of experience in Construction on High rise Towers

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Constructional Blasting, Quarry work, Coal Mines

Proficient with Leica RTK GPS, Total Stations & survey specific computer programs; Microsurvey, Autodesk Land Desktop, Leica Geo Office & Excel. Experienced pipe line & fibre optic locator.

Lead Mechanical Piping Engineer Gas and Power Plant site office testpack hydrotest pipe support punch list

Cad Engineer

Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )

Water & Wastewater Specialist searching for a challenging position overseas.

Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri

Basically I am a networking engineer. Can do any work related in computer field and can install most of the software, can assemble computer.

diploma im mechanical engineering,able to handle all kinds of equipment s

Graduate in Civil Engineering and Post Graduate in Information technology. Having over 10 years of experience in Marine Civil Construction projects internationally.

Goal-driven & result-oriented Oil and Gas Engineer with a strong mechanical, pipeline, facilities & project engineering background and over five years experience in the E&P industry.

Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact

11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor

AutoCad,Ms-Office

Electronics Engieer & MBA in operations and finance with 7 years experience in automation and control projects.Good in project management,PLC,SCADA,Coding.

Excellent Knowledge in Electronic Document Management System, Promote, set up and implement a document management department and system, making it appropriate to the needs of the project through the project lifecycle, Lead the Document Management department, providing effective direction and motivat

Excellent inter personnel skills with, a professional attitude, expert trouble shooter & problem solver, a firm personality to see tough jobs as a leader and a team member.

Substation, Construction, Maint. HV work

Oil & Gas, Petrochemical Industry Specialist

I am looking for a job as Technical Manager / Supervisor for heavy machines worldwide

All aspects of mineral processing plant construction

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out