Resume - To secure a senior level position responsible in Project Management, Engineering...

Misco Jobs

Resume #21920

CONTACT INFORMATION:
View contact information...

SUMMARY OF EXPERIENCE
Twenty years of diverse, multi-disciplinary experience in contract management, project planning, project budgeting and cost control related to industrial, construction and manufacturing projects. Contract negotiations, logistic management, fabrication and construction coordination, progress monitoring and control.

PROFESSIONAL WORK HISTORY

A. HIDADA LTD. Jeddah, Saudi Arabia
PROJECT MANAGER Jan 1995 - current

1. April 2004 - to present. Project Manager

Saudi Arabian Fertilizer Co. SAFCO IV. Extension Project. Jubail. Saudi Arabia. Main Contractor, UHDE GmbH, Germany

The project is designed to increase the total capacity by 1.2 Million TPA of Ammonia and 1.5 million TPA of Urea and includes:

Primary Reformer
Ammonia
Pipe Racks
Urea Synthesis
Office utilities including Ammonia Storage and Urea Storage Buildings.

The project execution comprised of design/detailing, fabrication of the steel structure by Hidada and coordination with UHDE GmbH and India Office and the Construction Contractor for the structure, equipment erection and piping installation.

2. Sept 2003 to Feb 2004, PROJECT MANAGER

Yanbu (YANPET) PETROCHEMICAL COMPLEX, Yanbu, Saudi Arabia.

The plant includes an ethylene plant, for which Hidada supplied the steel structure, heater casing and pipe racks. Activities involves:

Coordination with the ABB LHT for the designing/detailing and prefabrication of the steel structure, at Hidada

Coordination with the Construction Contractor for the erection of the steel structure, pipe rack and ethylene heater casing, insulation and piping.

3. Aug 2000 to Apr 2003 PROJECT MANAGER

Selective Catalytic Reduction Units, for the following Power Plants:

CINERGY PSI, Gibson Generating Station, Owensville, IN, USA.
CINERGY Power Plant, Miami Fort, OH, USA.
CINERGY Power Plant, East Bend, KY, USA.

These projects involve engineering, detailing and expediting of over 25,000 MT of structural steel and coordinating deliveries for erection from Hidada.

4. May 1999 to Aug 2000 PROJECT MANAGER

BASF/ATOFINA Steam Cracker, Port Arthur TX. USA.

The cracker produces 860,000 tpa of ethylene and 860,000 tpa of propylene. The plant includes an ethylene plant, for which Hidada supplied the steel structure, heater casing and pipe racks. Activities involves:

Coordination with the ABB LHT for the designing/detailing and prefabrication of the steel structure, heater casing at Hidada

Coordination with the Construction Contractor for the erection of the steel structure, ethylene heater casing, insulation and piping.

5. Sept 1997 to April 1999 PROJECT MANAGER

Ethylene Cracking Heater Units, OELFINS III Complex, Petrokeymeya, Jubail, Saudi Arabia.

The plant includes an ethylene plant, for which Hidada supplied the steel structure, heater casing and pipe racks. Activities involves:

Coordination with the KTI Manusemann/TECHNIP for the designing/detailing and prefabrication of the steel structure, heater casing, flare rack and pipe rack at Hidada

Coordination with the Construction Contractor for the erection of the steel structure, ethylene heater casing, insulation and piping.

Complete erection of the Heaters at offsite location and moving the complete assembled units to the plant site.

6. April 1996 to Aug 1997, Project Manager

PP9 Riyadh Power Plant, Riyadh, Saudi Arabia

This is 1200 MW combined cycle power plant. Hidada provided the Steel structure for the Boiler and Air Cooling Condenser.

Coordination with the CMI, Belgium for the boiler structure and GEA USA for Air Cooling Condenser, for the designing/detailing and prefabrication of the steel structure, at Hidada

Coordination with the Construction Contractor for the erection of the steel structure.

7. Oct 1995 to April 1996, Project Manager

Rabigh Power Plant, Extension, Rabigh, Saudi Arabia

This is 300 MW combined cycle power plant. Hidada provided the Steel structure for the Boiler.

Coordination with the NEM bv, Netherlands, for the team generator ducting, for the designing/detailing and prefabrication, at Hidada

Coordination with the Construction Contractor for the erection of the steel structure.

8. Jan 1995 to Sept 1995

Extension of Berri Gas Plant, Saudi ARAMCO, Jubail, Saudi Arabia.

The project is providing two turbo expander trains to recover ethane contained in the residue has for the existing NGL recovery facilities. Activities involves:

Coordination with the ABB Lummus Global Inc, Houston USA for the designing/detailing and prefabrication of the pipe rack steel structure, at Hidada

Coordination with the Construction Contractor for the erection of the steel structure, insulation and piping.

REPSONSIBLITIES AS PROJECT MANAGER:

Responsible to the Management for the preparation of the following works involved with the project:

* Steel Structure- Pipe rack, Fire Proofing,
* Tank Farms
* Piping
* Mechanical/Insulation/Painting

The duties performed included the following activities:
Direction, co-ordination and control of all phases of pre-fabrication, erection and meeting deadlines for erection schedules.

Dealing wit all aspects of the sub-contractors works, planning, procurement and verification of extra work orders from commencement to completion also ensuring that they meet the requirements of the project spececifications.

Ensuring that all personals on site follow safety procedures.

Preparation of planning exercise associated with various items of the work scope.

Participation in the weekly project meetings with the clients.

Liaison with the vendor representatives to ensure vendor-supplied equipment is specification compliant.

Production of engineering works on site so as to avoid potential clashes between disciplines.

Site resources management during project execution.

B. HEAVY MECHANICAL COMPLEX LTD. Taxila, Pakistan.

Assistant Manager From Dec 1990 to Apr 1994
Project Management Department

Responsibilities includes:

Engineering and Contract Administration involving tender preparation, finalization of the contract administration procedure with client for various projects. Contract administration involving resource planning, mobilization, and organization of support services, procurement planning and expediting. Project coordination with management including project progress, cost and schedule.

Assistant Manager From Oct 1988 to Dec 1990
Engineering Department

Responsibilities includes:

Cost estimation, preparation and reviewing of the tender documents in coordination with the Sales & Marketing Department, Production Planning and Control Department. Designing and detailing of steel structure for the cement plants, sugar plants, etc.

Assistant Manager From Aug.1983 to Oct.1988
Quality Assurance Department

Responsibilities includes:

Development of the Quality Assurance Manual, preparation of WPS, PQR, ITP. Inspection of steel structure and equipment for cement plants, sugar plants, asphalt plants, power plants, gas recovery plants, overhead cranes, pressure vessels, etc.

TRAINING PROGRAMS COMPLETED:
Quality Assurance, Petrotech Services. 1986.
Internal Quality System Management Audit, Hidada Ltd. 1996.
Construction Supervisors Safety and Health Training,
OSHA 10 Training, ABB Lummus Global Inc Houston USA. 1999.

EDUCATION:
1988 M.S.E, Univ. of Michigan, Ann Arbor, MI. USA.
1983 B.Sc Engg (Mechanical Engineering), Univ of Engg and Tech, Lahore, Pakistan.

COMPUTER EXPERIENCE:
Has goodworking knowledge of MS Office and Project software.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 3119)

Go to Search Parameters...

Brief Description

Mechanical maintenance equipment of all types

Degrees in Electronics and Instrumentation.Highly detail oriented, and organized. Good planner, a self-starter with ability to meet deadlines, and personable. International experience in & gas and other industries.

Senior Planning Engineer, > 15 years experience in upstream oil&gas projects, construction.

Italian citizen, born in 11th may, 1979; Building engineer with 1year of experience in engineering and 5years of experience in architecure and design.

To secure a senior level position responsible in Project Management, Engineering, Procurement and Construction aspects of heavy industrial petrochemical, chemical and power plant projects.

15 years of experience in design, technical assistance and consultancy for railways, highways, motorways, bridges, metallic structures, consolidation of slopes, arrangement of platforms. Experience in setting out, cost estimates and materials engineer.

Certified Welding Inspector

ENVIRONMENTAL HEALTH & SAFETY COORDINATOR : 5 years on sites (petrochemicals, chemicals, car industry, nuclear, steel, water industry)

As apparent in my resume I have close to 2 years of work experience. The most predominant project I was assigned too was at Motorola. I was working on a New York state-wide two-way radio communication network for emergency personnel.

Piping Engineer (Construction) Diploma in Mechanical Engineering Forteen years experience

troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding

PLC, SCADA, DCS, P&IDiagrams,Project Schedulling,Estimation,MS office

Senior Project Manager, Quality Manager, International experience

I hold a Master Degree in Civil Eng. – Canadian Equivalent and possess 17 years of professional experience in Project/Construction Managt, Design and Manfg of Structural Steel and Pre-Eng. Buildings. Regstd PE in Canada on August 05.

A total of 9 years of experience of which 3 years at Bharat Heavy Plates &Vessels Visakhapatnam a leading Fabrication Workshop in various capabilities of production, welding, inspection of materials, construction, planning, project engineering and informatics

I have 15 yrs experience in Mechanical, Strustrual, piping in projects& running field in Refinery, petrochemical, oil & gas, chemical, ship repair maintenance & new building as a Sr. mecanical engg., mech manager, Sr. piping engg.

DEGREED MECHANICAL ENGINEER - QUALITY ASSURANCE – DESIGN – SERVICE – TECHNICAL SALES

ETAP Power System, PLC, NEC, ANSI, IEEE, NEMA, IEC, electrical testing & commissioning, Over twenty (20) years of hands-on experience focusing on High Voltage (HV) and Low Voltage (LV) Power Distribution System, project management, electrical engineering design, project coordination and supervision

Experience/Knowledge in: * Classification Survey * Statutory Survey * Ship Operation/Management/Audit * Shipbuilding * Ship Repair/Modification * Ship Design (Computer Aided-2D & 3D, Structural & Mechanical) * Quality/Safety Management & Certification * International Standards * Project Management

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Kahramma and Qatar petroleum Authorised Electrical Engineer with skills of Automation and 1year Experience in EHV U.G cable installation inside live substation and in infrastructure.

Bachelor of Electronics Engineering ,14+ yrs of experience in designing and commissioning complex programmable logic controller (PLC) based control Systems for Process and Machine automation.drawing tools like AUTOCAD, ORCAD.,SCADA Packages like Intellution-Fix32, Ellipse,

A qualified and internationally experienced Mechanical Engineering professional graduated from Kirikkale University (Kirikkale/TURKEY) with a Bachelour of Science Degree in Mechanical Engineering in June 1997 followed by a Master of Science Degree in Mechanical Engineering from Texas A&M University

Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.

Auto Cad

I am BE (Mechanical). I am working as Assitant Planning Enginner In PECL at LNG Project Of Shell Gas Pvt. Ltd. at Surat

looking for a job

Looking for work as a civil engineer

Strong computer skills utilizing CAD, GPS & data collection systems. Analysis of survey data and its use combined with aerial photogrammetric surveys. Quality control of digital mapping. Layouts for construction works. Management of multiple survey crews.

Civil Engineer seeking position in the oil Business or Construction

Electrical Engineer with over 21 years' varied experience in Projects- contracts, engineering, construction, project management with EPC-MNC, Large Process/Chemical and Electricity Utility companies

Mineral Engineering Technologist, 6 yrs experience with International geotechnical consulting firm, Mining Engineering Degree expected 2010

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

Autocad, Primavera Planner, Excel, photoshop My special skills.

OFFSHORE C & I

18-years of Middle East work experience on Major Projects Documentation in Oil & Gas Industries. Capable to operate different EDMS programs and familiar to Vendor & Design Technical Documents and Engineering Drawings.

I have vast experience in pipeline engineering & integrity involving smart pig, pipeline cleaning, coating. Also, I have experiences in decommisioning of pipelines and skills in engineering maintenances involving static equipment, Corrosion & OCTG.

Civil engineer (having good skill in building design and drafting using autocad application, surveying and plotting and drafting survey map using auto cad land development, structure design, have good knowledge in GIS and HEC-RAS, etc)

PhD environmental engineering/bioremediation, MSc environmental diagnostics, BSc (Hons) Biology

Licensed Professional Engineer registered in British Colombia and Alberta, and able to be registered in other Canadian, U.S. and international jurisdictions.

To offer a background 0f 15 years experience in EPC & Commissioning including 4 years in construction management and 4 years in project engineering & 7 years in field of construction projects with proven strength in inspiring the confidence and trust of Owners & others of Petrochemicals projects/ref

I have the EIT license and took the PE Exam on April 2009. Familiar with SAP 2000, Staad Pro, Mathcad, AutoCad, and ABAQUS. Academic experience in Civil/Structural Engineering, and professional experience in Environmental Engineering. I am looking to relocate to the Boston Area.

12 years of experience in project management, site supervision, shop supervision, estimation & costing, tendering, inspection, testing and commissioning of cross country pipeline and heavy fabrication

Pipeline construction Engineer with knowledge in Piping Design

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

Project Engineer - Electrical Electrical Engineer with (15) years of experience in multi national projects in India (4 years) and Middle East Power projects (11years) Construction and Project Management field especially in High Voltage Substations and Power Station environment

11 Years of Experience in implementation of the General Safety of Employees, equipments & Work Permit System, Accident Investigation & analysis, Identification of actual & potential Safety Hazards in respect of Health, Safety & Environment, Carrying out project safety inspection, Job Safety Analysis

Highly qualified geotechnical engineer with sound engineering knowledge and judgement to serve the industry efficiently.

HSE Learning/Development Professional seeking position in an industrial setting.

2:1 Honours degree in construction management and Engineering.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out