Resume - Qualified and well experienced Piping Engineer; availing in excess of 25 years o...

Misco Jobs

Resume #22838

CONTACT INFORMATION:
View contact information...

PIPING/FIELD/CONSTRUCTION ENGINEER – PROCESS & POWER

PERSONAL PROFILE
Qualified and well experienced Piping Engineer; availing in excess of 25 years of experience in the full spectrum of engineering, design, detailing, fabrication, erection, retrofitting, testing, QC, commissioning, maintenance and demolition of Process/Power Plant and Piping.
Well acquainted with a vast variety of piping applications, materials and jointing methods across various industry sectors and fully conversant will all project stages; spanning the office, shop, field as well as live plant – from conceptual layout through to Operational Acceptance by Client.
Offering, in particular, more than 15 years' experience, of which 12 is on-shore related, specific to the Oil & Gas Industry, while also being fully conversant with a wide range of process and power industry codes as well as EPC/M and owner procedures and specifications.
Fully computer literate, very familiar with allied disciplines/trades and seasoned in safe construction practice and increasingly more stringent HSE considerations. Well experienced in accommodating all levels of personnel skills and contractor capabilities.

QUALIFICATIONS
Higher National Diploma – Mechanical (1977), Vaal-Triangle Technical University – South Africa.

KEY SKILLS
* Keenly acknowledged safety awareness and appreciation of core HSE causes, values and objectives
* Well established client/3rd-party communication skills and capability to mix in with personnel at all levels
* Ability to adapt effortlessly to changing milestones, engineering/design requirements and site conditions
* In-depth problem solving experience within and across engineering/construction/QC disciplines/trades
* Proven tenacity in expediting vendor/supplier/contractor information, deliverables, material and results
* Wide ranging site experience and thorough familiarity with construction, operation and maintenance
* Proactive in developing subordinates, to assume increased responsibility, and in earning their respect
* Well-exercised working knowledge and strong grasp of industry codes, standards and norms/practice
* Acquainted with a wide range of software applications within the engineering and design environment
* Resolute to remain informed and trained in new trends and improved products, materials and methods

IT/COMPUTER LITERACY
* Office: All Microsoft® Office 2003 products, as well as Visio, OneNote, Publisher. Excel and Access (the latter either boxed or running MSDE) specifically for extensive data manipulation/reporting
* Visualisation: Intergraph® DesignReview® and - SmartPlant® Review
* Piping Stress: CAESAR II®, TRIFlex®, Algor® PipePlus and Rohr 2 (static, limited dynamic)
* Networking: AFT Fathom and AFT Impulse
* Scheduling: Primavera® SureTrak®, Microsoft® Project and Primavera® P3 (limited P3 experience)
* 2-D/3-D CAD: AutoCAD®, MicroStation® and SmartSketch® (now an infrequent user)
* RdB: Oracle® 8i and Microsoft® SQL Server (limited SQL scripting), Seagate® Crystal Reports
* Intergraph® PDS (administration): spec-writing, PD_Stress, libraries & ortho/iso drawing extraction, etc
* Miscellaneous: MathSoft® MathCAD®, UGS Solid Edge, COADE® FE/PIPE® & Adobe® Acrobat®

LANGUAGES
* German - Working Knowledge
* Dutch - Working Knowledge
* French - Basic Knowledge
* Russian - Basic Knowledge

CAREER HISTORY
Mar 2004 – present Piping Tie-in/Interface Coordinator, Parsons/Fluor-Daniel
Kazakhstan
Chevron-Texaco – Second Generation Project
Responsible for Project-wide Piping Tie-ins and - Interfaces; Engineering close-out, Management of Change, Client Handover, Contractor Supervision and EPCM Work Turnover process – including Detail Planning, Method Statements, Inter-discipline Coordination, Reporting, Commissioning & HSE.

May 2002 – Feb 2004 Lead Piping Engineer, Bateman Metals Limited
South Africa, Namibia
Impala Platinum – Base Metals Refinery Expansion Project (Springs, South Africa) – full scope
Anglo Platinum – Precious Metals Refinery Expansion Project (Rustenburg, South Africa) – piping stress
Anglo Base Metals – Scorpion Zinc Refinery Project (Namibia) – punch closing & pre-commissioning
Responsible for engineering, design, procurement and for Piping/HVAC Drawing Office while overseeing fabrication, erection and QC. Client Documentation generated for full Owner ASME B31.1/3/4/8 compliance; Line Classes, Specifications and Data Sheets – mainly stainless steel, thermo-plastics and composites.

Feb 2001 – Apr 2002 Senior Field (Piping) Engineer, LURGI ÖL* GAS* CHEMIE / LGE&C
State of Qatar
Qatar Petroleum Refinery Expansion Project (Mesai'eed, Qatar)
Responsible for Piping/Mechanical component of FCCU construction, on-site documentation rework, field query resolution, piping design review/rectification, material consolidation, test pack close-out & Client/UOP/Parsons Punch clearing.

Oct 1998 – Jan 2001 Drawing Office Manager, Lurgi South Africa (Pty) Ltd
South Africa, Turkey
SCI Methanol Distillation Plant (Sasolburg, South Africa)
Bayer Chrome Acid Plant (Durban, South Africa)
HDPE Expansion Project (Petkim, Izmir, Turkey)
IML Gas Cleaning Plant (Rustenburg, South Africa)
MossGas Tank-farm Expansion Project (Mossel Bay, South Africa)
Sasol SCU Plant (Sasolburg) – Air Liquide JV (Sasolburg, South Africa)
Responsible for multi-discipline DO function, engineering coordination and piping materials. Established integrated CAD environment across all disciplines and implemented Intergraph® PDS, Intergraph® SmartPlant® (P&ID & Review) and Intergraph® INtools®.

1997 – 1998 Senior Engineer - Piping, FPH-Moody (TPI/AIA)
South Africa
SCI (Sasol One) – Cooling Water Upgrading Project
Responsible for full Scope of Work; scheduling of Shut-downs and integration with Plant Turnarounds, discipline interfaces and on-the-fly engineering, drafting and QC while overseeing all fabrication and erection - 218 Tie-ins (70 Hot-taps) ranging from 1½" through 56".

1996 – 1997 Piping Engineer, LTA Process (Pty) Ltd
South Africa, Zambia
Foskor/IDC PalMag (Phlogopite) Base Metals Plant (Palaborwa, South Africa)
Bwana Makuba Gold SX & Sulphuric Acid Plant (Zambia)
Responsible for Piping Specifications, Piping Line Classes and Piping Stress/Supporting while providing construction assistance for both projects – CADCentre® PDMS (now Aveva® Vantage®) design.

1995 – 1996 Piping Engineer, TechnoMetrics cc
South Africa, Namibia, Malawi, Mozambique
Numerous small projects – Foster Wheeler, Sasol (SCI, SMX & SFF), Natref, Sappi, Aqazur, IMS
Turnaround scheduling/management assistance and piping design/drafting packages not exceeding 2000 man-hours as single/multi discipline component(s) of client engineering projects normally not exceeding ZAR 20mil total project budget.

1992 – 1995 Piping Stress Engineer, Foster Wheeler Babcock
South Africa, Malaysia
Petronas Penapisan – De-bottlenecking Project (Kerteh, Malaysia)
Caltex Isomerisation Project (Cape Town, South Africa)
Polifin Restructuring Project (Sasolburg, South Africa)

1991 – 1992 Piping Stress Engineer, EMS (Tvl) / BADGER AFRICA
Natref Expansion Project (Sasolburg, South Africa) South Africa

1990 – 1991 Lead Piping Designer, Sastech – Sasol One
Sasol One Renovation Project (Sasolburg, South Africa) South Africa

1989 – 1990 Pipe Support Designer/Stress Technician, Foster Wheeler SA / Lurgi SA
MossRef Onshore Project (Mossel Bay, South Africa) South Africa

1986 – 1989 Piping/Pipe Support Designer, Babcock Mossel Bay Contractors (Pty) Ltd
MossGas Offshore Project (Port Elizabeth, South Africa) South Africa

1985 – 1986 Piping Designer/Field Engineer, TOSA
Seamless - and Welded Mill Projects (Vereeniging, South Africa) South Africa

1983 – 1984 Assistant Area (Mechanical Maintenance) Engineer, Sasol Two/Three
Mechanical Services Department (Secunda, South Africa) South Africa

1981 – 1982 Piping Designer, Sastech
Sastech Drawing Office (Secunda, South Africa) South Africa

1979 – 1980 Trainee Mechanical Draftsman, South African Air Force
SODD, Air Logistics Command (Pretoria, South Africa) South Africa

1978 Trainee Statutory Equipment Inspector, Sasol One
Sasol Inspection Department (Sasolburg, South Africa) South Africa

HOBBIES / INTERESTS
Scripting (Database, Spreadsheet & CAD), composite materials, cycling and fish-keeping.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1301 to 1350 of 3123)

Go to Search Parameters...

Brief Description

I am Civil Engineer having 9 years experiance in marine works. construction of breakwater, Quawalls installation, boat ramps, shore protection, reclamation and dredging with multinational construction company and consultants. presently working with reputed consutlant in maritime field.

Over 20 years of Electronic, Electrical and Mechanical experience. 10 years of Field Service in both domestic and international travel.

I am lead piping engineer ,supervised 6 engineer ,6 autocad drafter and 7 PDMS staff.I am familiar with all international stds related to oil&gas ,petroleum and power plant.

HSE Manager in major energy, power generation, oil and gas sectors covering technical and commercial requirements. With professional experience in directing and mananing health, safety and the environment protection & sustainability development aspects as per OSHA framwork and guidelines. Strong abi

18 Years including 10 years in oil & Gas - Construction experienced Safety Specialist , having Mechanical engineering Degree from Bangalore University and Diploma in Industrial Safety From RLI Chennai, India & OSHA 30 Hours Trained - Key skills : Construction Safety Mangement, Auditing, Trainer

Educational Qualifications: Master of Engineering in Mechanical Engineering specializing in Welding Engineering from Indian Institute of Technology, Roorkee, Uttar Pradesh, India in April 1996 with 74.40%, American Welding Society (AWS) Certified Welding Inspector (CWI) -AWS-CWI Certificate

Planning, Scheduling, Project Controls, Cost Tracking, Site Management, Construction Management

3 yrs diploma in mechanical engineering with 1st class from bset, bhubaneswer (india) in April-2002 professional qualification: -• cswip 3.1 (twi) certification for welding inspector, cert. no- 36291 •surface preparations & paint application techniques (certification from jotun paint school)

Senior Primavera 6.2 Planner / Scheduler or Management Skills

Experience as Piping Designer, in performing Pipe Modeling, Piping Arrangement Drawings, Checking & Extraction of Isometrics from 3D Model. ƒá Hands on Experience in Piping Software¡¦s ¡V Bentley¡¦s PlantSpace Design series, Microstation, PDMS & TRIBON M3. Knowledge of Piping Stress Analysis.

I have done degree in mechanical engineering. I am having AWS-CWI certification. And I am also having approval of Saudi Aramco as a Welding Inspector. I have also done ASNT level-II in UT, MT, RT, and PT. I am having more than 5 years and 8 months experience in oil and gas field.

Highly skilled graduate Project Manager/Civil Engineer and Project Controls Lead with more than 25 years related domestic and international experience in project and construction management.

Result oriented Geotechnical/ Engineering Geologist with 2-3 years onshore experience in ground engineering with keen interest to develope further expertise in the field. Strong analytical and personal ability to problem solving solutions with Civil Engineering Geology knowledge of Construction

Experience in control Automation system ,contruction and oil and gas

PLANNING/SCHEDULING ENGINEER & BACHELOR OF ENGINEERING (CIVIL)

Autocad & Inventor Draftsman

I have 12 years work experience in Civil Engineering Constructions and 4 years experience in Environmental Remediation project for Brunei Shell Petroleum. My Supervisor experience includes execution of structures as per drawings and specifications with skilled group of trade persons and subcontracto

A multi-skilled mechanical/piping, Construction Superintendent/manager, QA/QC Engineer, with over 20 years international experience in the oil, gas, petro-chemical and power generation industries

Industrial Electrical, Instrumentation, Power Generation Systems, PLC and Scada design and programming, Construction and Maint.

•Over 9 years experience preparing detailed estimates for Capital Projects involving all engineering disciplines including process design, civil, structural, mechanical, piping, electrical, instrumentation, and process control for Mining and Heavy industrial Projects.

Sr. Piping Design, Lead Des, ACAD 3D, Microstation 3D

Estimating

Qualified and well experienced Piping Engineer; availing in excess of 25 years of experience in the full spectrum of engineering, design, detailing, fabrication, erection, retrofitting, testing, QC, commissioning, maintenance and demolition of Process/Power Plant and Piping.

Land surveyor, Road, Stormwater, Sewer, Subdivision designer

Strategic marketing, business development and executive search professional with strong record of implementing sales and strategic plans that support corporate and financial goals. An effective executive search director & professional.

A highly talented and accomplished Electrical Design Specialist with skills and experience in Electrical and Protection systems for EHV/HV substations (AIS/GIS) and MV Power Distribution systems.

* Exceptionally qualified Professional with more than twenty years of experience as a Field Engineer in the industrial and power industry

Structural Design Engineer with more than three years of experience in the field of design of bridges, underpasses, buildings and other highway related structures.

Bachelor of Civil Engineering from Jawaharlal

Any Job Opportunity in Contract Administration and Quantity Surveying

I would like to associate myself with an organization that provides ample scope to hone my skills and turn into versatile architect.

Structural Engineer with 2.5 year work experience and Master Degree

Quality and Welding engineer with rich experience over 12 years in oil and gas/petrochemical sector for most of years in offshore, I am looking for challenging position in international multi-cultural environment in QA/QC field.

I am proficient in the use of Primavera and microsoft project tools. I have about 6 years esperience in planning/scheduling of oil and gas and construction projects. Within my 7 years experiencece as a planner, i have been involved in development of base schedules as well as forecast schedules.

DCS/ESD - DESIGN,FAT,SAT,POWER_UP ,COMMISSIONING,HOT/COLD CUT OVER & MAINTENACNE

Piping and Pipe Stress Engineer with wide range of experience in industries Petroleum Processing, Power, Chemicals, Petrochemicals Polymers and Steel Production. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams

Project engineering/managment

Mechanical?Electrical Engineer,Steel Expert,Steel Plant operation Incharge Marketing & Sales Incharge ,QMS,EMS.OHSAS Regd Lead Auditor,MBA9Business Admin.Professional Doctorate in Environmental Management.,Handled Projects as well as Maintenance,Director,European Quality Body,Managing Directoer Asia

Project engineer-Mechanical, HVAC, Utility equipmets-Operation and maintenance

Senior Mechanical / Piping Engineer

Structural Steel & RCC Designs in the fields of Oil & gas, Power, Steel and Aluminum Plants and other Industrial Structures

I have followed the four-year degree program leading to the B.Sc Engineering Degree specializing in the field of Civil Engineering, and have obtained the B.Sc Degree with Second Class Honors (Lower Division) Pass.

Thirteen years of total experience in Project Engineering, Tendering, Cost Control, Material Procurement, Execution and Supervision of heavy civil and marine construction of seawater power and desalination plants and wharfs/jetties/local fuel oil and lng/ngl terminals.

Diploma in mechanical ,Draftsperson auto cad,catia v5, pro/e,staad/pro and microstation

on hydrologic and hydraulic analysis of waste water systems, analysis and rehabilitation of sewer systems, storm water management techniques, site planning, road designs, storm drain systems, erosion and sediment control techniques, cost estimations, Civil3D, AutoCAD, Hydraflow

I am well proficient in AutoCAD, 3ds Max and Photoshop

BSc CEng with over 6 years of experience in huge excavations & earting works, specialized in earthquake retrofitting of industrial, public buildings,Thermal PP,Pipe Line projects.

A self-motivated, highly disciplined and hard working graduate electrical engineer with over 26 years of extensive experience in various disciplines such as Specifications, Tendering, Design & Engineering, Construction, Project Management and O & M.

20+ years in Control Systems Engineering/Design. Experienced Intools user.

I have 12 years experience in Installation, Commissioning & Operation of HVAC and Plumbing systems of any capacity

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 [ 27 ] 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out