Resume - HSE Engineer

Misco Jobs

Resume #24150

CONTACT INFORMATION:
View contact information...

Designation: Health, Safety and Environment Engineer

EDUCATION:
2000 Bachelors of Engineering.
Civil and Environmental Engineering
American University of Beirut, Lebanon.
2004 Masters of Engineering.
Environmental and Water Resources Engineering
American University of Beirut, Lebanon.

SUMMARY:
Three years of HSE experience in the fields of Oil and Gas onshore construction and engineering design within the Caspian, Middle East and Gulf regions. Two years performing advanced environmental research at the Environmental and Water Resource Engineering Department at the American University of Beirut.

* Petrofac International Ltd. *
HSE Design/Construction Support Engineer

May 15th (2004) - to date:
Sharjah, UAE
Mitigation of NGL Plant Flares Quatar Petroleum (QP)
Preparation of the Environmental Management Plan, Waste Management Plan and Environmental Emergency Response Plan in addition to a number of project specific environmental procedures. Experience with the State of Qatar's National Environmental Legislation & Regulations and Qatar's Supreme Council for the Environment & Natural Reserves (SCENR).

May 15th (2004) - to date:
Sharjah, UAE
Replacement of NK Crude Oil Export System; Kuwait Oil Company (KOC).
Supervision of project EIA report preparations, including field baseline studies and data modelling and assessment. Experience with Kuwaiti National Environmental Legislation & Regulations and the Kuwaiti Environmental Protection Agency (KEPA).

May 15th (2004) - to date:
Sharjah, UAE
Gas Sweetening and Sulphur Recovery Unit; Crescent Petroleum Company.Preparation of Construction Environmental Management Plan, Waste Management Plan, Emergency Response Plan, and Incident Reporting and Investigating Procedure. Aiding in the maintenance of onsite HSE management system. Experience with UAE Environmental Legislation & Regulations and the Federal Environment Authority (FEA).

May 15th (2004) - to date:
Sharjah, UAE
Kashagan Development Experimental Program; Agip KCO.Preparation of Consequence Modelling Report including fire, flammable and toxic gas dispersion, and explosion consequence analysis. Preparation of Evacuation, Escape and Rescue study.

May 15th (2004) - to date:
Sharjah, UAE
Gap Analysis - Selection of Statoil's Governing Documentation; Statoil (Norway)Comparison of Statoil design and construction corporate documentation in the areas of safety, health and environment to corresponding international best-practices for onshore oil & gas production facilities in the Middle East region.

Environmental Compliance Officer
July 1st (2004) - September 19th (2004):
Tbilisi, Georgia
BTC Pipeline, Georgia, Azerbaijan, Turkey; British Petroleum (BP).Preparation of project environmental claim regarding non-compliance issues in relation to waste management, on site monitoring, KPI targets, document approvals, and various other non-contractual environmental obligations imposed on Contractor.

Field Environmental Coordinator
July 15th (2003) - May 15th (2004):
Tbilisi, Georgia
BTC Pipeline, Georgia, Azerbaijan, Turkey; British Petroleum (BP).Central coordination of environmental reporting activities including weekly reports, monthly reports, KPIs, NCR/CAR, monitoring data, waste numerics, incident reports and other reporting as necessary under the Environment Management System.

Field Environmental Engineer
April 5th (2003) - July 15th (2003):
Tbilisi, Georgia
Baku, Azerbaijan
BTC Pipeline, Georgia, Azerbaijan, Turkey; British Petroleum (BP).Aiding in the preparation and implementation of the Reinstatement and Landscape Management Plan, Pollution Prevention Plan, and Waste Management Plan for the Construction phase of the project. Setting up, and maintaining the environmental monitoring, procurement and training programs.

HSE Design Engineer
August 17th (2002) - April 5th (2003):
Sharjah, UAE
Project for Dorood Onshore Facilities, Iran; TotalFinaElf. Performing flare dispersion and radiation modelling. Preparation of HAZID, HAZOP, ENVIID and HAZCON procedures. Sitting in as the HAZOP scribe.

* American University of Beirut *
Research Assistant
February 15th (2001) - August 15th (2002):
Beirut, Lebanon
Performing research related to industrial waste management, water and wastewater treatment processes, wastewater reclamation practices, development of natural resources within an economically sustainable framework, and the use of alternative fuels. Experience with Lebanese National Environmental Legislation & Regulations and Lebanon's Ministry of Environment.

Graduate Assistant
September 5th (2000) - February 15th (2001):
Beirut, Lebanon
Lecturing and proctoring of Hydraulics lab course. Assisting with advanced water and wastewater treatment courses.

AWARDS AND SCHOLARSHIPS:
Full scholarship granted by AUB throughout the two years of the ME degree (2000-2002).

University Research Fund granted by AUB for work on Master's thesis. Thesis involved a wastewater reuse and reclamation management plan for the coast of Lebanon. The management plan included an integrated wastewater management computer model.

The Abd El Aal Research Award granted as further funding for continued work on Master's thesis.

PUBLICATIONS:
"Potentiality of Wastewater Reclamation and Reuse in the Lebanon" published in the International Journal of Environmental Pollution.

COURSES AND TRAINING:
BP Environmental Competency Training Course for the Baku-Tbilisi-Ceyhan Pipeline Project.
BP Environmental, Social and Cultural Heritage Training Course for the Baku-Tbilisi-Ceyhan Pipeline Project.
RWTUV ISO 14001:1996 EMS Awareness Course.
RWTUV OHSAS 18001:1999 Safety Awareness Course.

COMPUTER SKILLS:
Extensive Microsoft OFFICE skills, including building databases and programming within Access and Excel frameworks. STELLA, model building software. ADMS, CIRRUS and FRED consequence modelling and flare dispersion and radiation modelling softwares. PHAworks, for conducting HAZOP studies. Visual Basics, AutoCAD, and ESRI Arc Explorer GIS software.

LANGUAGE SKILLS:
Arabic: Native
English: Fluent
French: Good

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 2811)

Go to Search Parameters...

Brief Description

I am an Multi Skilled Engineer Currently working at Road Development Authority, Sri Lanka

MIT educated program manager/engineer seeks full-time employment in engineering, financial modeling/investing, or engineering management involving optimization, system identification, simulation, graphical user interface design/implementation, and/or control system design/analysis.

Systems Engineer - Project Planning & Control Specialist. Oil & Gas / HVAC / Construction

Hand and computer skills+designs, calculation and workshop drawings+site coordination

Project Management, Telecommunication

Skills in various disciplines such as Welding Inspection, Plant Inspection which includes static equipments and piping, Material Testing, Failure Analysis and Lifting Inspection.

Entry Level mechanical engineer

QS/ISO 9000, FMEA/ Control Plan/PPAP

Professional Engineering,construction & Commissioning of electronics and pneumatic Experience types of instruments such as transmitters, pr. switches, control valves, RTD's Leveltroll, I/P converters, mass flow meters,

I have over 19 years of experience working in the Petroleum Pipeline Industry doing a variety of roles. Until very recently, I have been on a special assignment as a “Lead Project Inspector” on a new Pipeline Delivery Facility, but also have other additional managerial & supervisory responsibilities

Sr. Planner, Scheduler, Risk Management using Monte Carlo Simulation

Design and Construction, Engineering, Calculations, Quality control, Installation and Start Up of new Equipment, Electrical and Electronics Repair and Maintenance

Hands-on skill in Allen Bradley PLC, SLC, Panel Builder 32, RS logix, Frequency Drives,HMI software, SCADA-DCS, Industrial Mechanics and in Broadcast Transmitter.

Bachelor of Engineering (Electronics & Instrumentation) & Master of Technology (Process Control & Instrumentation). Experience in Advanced Process Control & Instrumentation. Total years of experience: 3 Years

D.M.E, Autocad 2D&3D handling all high-tech machineries

15-years of experience as Document Controller for vendor & design documentation in gas and oil industry.

Electrical, Instrumentation, SCADA

DCS Engineer working on power and oil & gas facilities

• Knowledge & experience in Large scale Rock blasting. • Knowledge mining software Surpac

7-years High School. Experience covers surface and subsurface production maintenance operations, onshore and offshore facilities’ maintenance, engineering projects execution, drilling equipment maintenance, planning and training aspects in various supervisory and management roles.

Mechanical Engineer with 16 years experience in Saudi Arabia, Abu Dhabi, Malaysia, and India. Working in Oil and Gas Industry and Power Plant Construction / Commissioning and Maintenance.

Twenty-two years experience in design, fabrication, field erection and commissioning of various oil and gas plants and equipment. Piping and equipment layouts with specific expertise in mechanical, thermal and process design of pressure vessels, direct fired process heaters, furnaces, boilers, press

Service Support/ Product Support Heavy Equipment Maintenance Manager

Long experience, professional skills, mastered business sectors: Oil - Petrochemical plants, Banks, Government organizations, Multinational organizations, Hotels & Commercial companies all with its different type of applications, working environments and unique needs.

CAD Designer (electrical/instrument) Extensive years of experience in AutoCAD (Rel. 2004)

I am a recent graduate mining engineer that possesses the following skills: analyzing complex numerical information, working enthusiastically and productively under pressure, dealing professionally with teammates, and working efficiently in a variety of teams and on my own initiative.

Civil-water resources-water distributtion- pipe - sewer design-hdrology-awards-high computer skills

Site Manager, Supervisor, Commissioning, Start up, Troubleshoot,

Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR

12 Years of Experience in the field of QA/QC Supervision Inspection of Electrical,Instrumentation and CathodicProtection Systems for Oil & Gas Producing Utilities, Remote & Relief Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, etc

Environmental Engineering , carbon trading , GIS , water treatment , computer knowledge

QA Manager,Quality Engineer, QA/QC Supervisor, Auditor, Instructor,Multi-Discipline Field Inspector

Key skill: Design and Implementation of quality management system Education: Degree in Mechanical Engineering (A.M.I.E) from “The Institution of Engineers”-India Certifications: ISO 9000:2000 Series QMS Lead Auditor - course conducted by B.V.Q.I.

Have been in the power plant industry for over 20 years, gas, steam, simple cycle, combined cycle, A10s, Frame 7FA, Frame 5 L&M

I have extensive experience in a wide range of Instrumentation and control systems; covering a range of job functions in various industries i.e. process, chemical and petro-chemical, on-shore oil & gas, pharmaceutical. Involvement in all areas of instrumentation engineering: electrical interfaces an

Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation

Chemical Engineer from Indian Institute of Technology(IIT)-Delhi

Electrical and Instrument system design and commissioning, Project Engineering, Control and Automation Engineering. I am degree qualified in Electrical and Instruments

Chemical Engineer with Environmental Engineering experience

Results Driven Project Manager w/16yrs Industry Experience. Master of Civil Engineering/BSc Petroleum Engineering/Certified PMP/EPC Management/AFE Management/Contracts Review/Risk Analysis/Global Client Experience/Global Team Development: Lead by insistence on personal accountability and growth.

Well experienced as an Electrical Field Maintenance and Construction QA/QC & Foreman in Oil and Gas Facilities, Refineries, Airport and Mining Industries with a demonstrated ability to lead Maintenance and Construction Projects.

Senior Mechanical Engineer, Bachelor Of Engineering

Maintenance Planning scheduling, Maximo, Ms Office- Word, Excel, Power Point etc. Excellant English communications, Dedicated, organized, time management, result oriented, punctual and hard working

I have spent about 8 years, applying innovative approaches to spatial data development, Integration and Management practices in my various capacities.

Bachelor of Mechanical Engineer, TWI Certified CSWIP 3.2, AWS certified CWI, Level II in MT, PT, RT, UT and ISO 9000-2000 Certified Lead Auditor.

Operations Manager or Shift Supervisor in a Power Plant

Rigging/Heavy Lift And Transport

Developing valve exercise and hydrant flushing programs for municipal water systems and supervising their implementation. Preparing annual budgets for construction and operating accounts as well as non-recurring major expenditures.

I have a Bachelor of Engineering Degree with Post Graduate Diploma in Construction Management, and with my wide ranging experience in the field of Engineering and Construction for a period of over 13 years,I am looking for a opportunity to excel myself in Planning and project Controls.

HSE Engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out