Resume - B. Tech (Electrical) with more than 15 years experience in project management, d...

Misco Jobs

Resume #24763

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
* Worked with both Utility and Consultancy Firm and thus have better understanding about requirements of both sides.
* I have experienced in almost every aspect of electrical power generation/distribution and control systems(not power plant instrumentation) i.e. from planning, preparation of tender documents, design & engineering, selection of contractors, Contractor's document review, factory tests witnessing, site supervision, expert engineer during warranty period etc.
* During my time in Malaysia, I have developed the ability to deal with different cultures and conflicting situations, within a demanding work environment.
* Have working knowledge of mechanical and instrumentation & control systems in a typical combined cycle power plants and substations.
* Have good exposure to FIDIC and other Contractual documents.
* Good working knowledge of IEC/BS Standards.
* Proficiency in PC handling e.g. MS Word, MS Excel, MS Access, MS Project and working knowledge of Auto Cad.
* Working experience in System Study software (DAPPER, CAPTOR, Motor Starting Analysis) of SKM System Analysis Inc, USA.
* Exposure to other software packages e.g. PowerStation, Cymgrid, Calculux etc.

MEMBERSHIP
* Associate Member, Institution of Engineers (India)
* Member, Institution of Engineers (India)
* Charted Engineer, Institution of Engineers (India)

PAPER PUBLISHED
* Design Requirements of Remote Terminal Units, BHEL Conference, New Delhi 1995
* Evaluation of IEC 870-5-101 Protocol and Its Relevance in Indian Power System – CIGRE, Delhi Chapter, 1996.

TRAINING UNDERGONE
* Design, engineering, installation, commissioning, operation and maintenance of thermal power plants, substations and transmission lines – One year course at Power Training Institute, Badarpur, Delhi
* Power System Protection – One month course at PSTI, Bangalore, India
* Design and Engineering of SCADA/EMS system – 8 days course at CMC, Hyderabad, India
* Graphical User Interface – four days course at STG, New Delhi
* Software Testing – two days course at
* Oracle 7.0 – 2 weeks course at
* Attended several seminars/presentation by major protection relay & SCS/SCADA/EMS suppliers both in Malaysia and India

OBJECTIVE:
Project Manager/ Senior Engineer position with overall responsibility for electrical/project management works

WORK EXPERIENCE:
"January 1998 – To date": MINCONSULT SDN BHD, KUALA LUMPUR, MALAYSIA

Projects
1. Tenaga Nasional Berhad (TNB) Engineering and Financial Audit 2004– Project status ongoing, will be completed by July 2005 (Minconsult in Consortium with Price Water House (PwCAS) Malaysia and Australian Power and Water Australia)

Group Leader (Transmission)/Overall Electrical Coordinator for Generation and Distribution position, with responsibility as Auditor:

* Preparation of proposal for bidding for Audit work.
* Preparation of detailed audit plan
* Identification of key tasks and information requirement
* Preparation of questionnaire to be used during meetings
* Preparation of report format and population of report content
* Review and analysis of information received from TNB
* Coordination with other consortium partners especially providing engineering inputs to PwCAS for their part of audit
* Preparation of presentations about findings to TNB officials

2. Teluk Salut 190 MW Combined Cycle Conversion Project incl. extension of 132 kV bays in existing switchyard, Karambunai, Sabah, Malyasia. – Project status ongoing, project revived after two year

Project Manager/Lead Electrical Engineer position with responsibility as Owner's Engineer. Main responsibility included:

* Preparation of proposal for bidding for Consultancy work.
* Preparation of detailed technical specification, for electrical and control systems in steam cycle plant and extension work in 132 kV switchyard.
* Preparation and participation in Power Purchase Agreement (PPA) between the Owner and Distribution Company (SESB)
* Bid evaluation for main contractor selection process and recommendation to the Owner.
* Negotiation with Selected Contractor for optimisation of delivery schedule and price in order to achieve optimisation for the Owner.
* Review of Contractor's proposal for Basic engineering.

3. University Putra Malaysia (UPM) – Digital Power Line Communication (DPLC) Project – Project status ongoing

Lead Engineer position with responsibility as Service Provider's Engineer. Main responsibility included:

* Carrying out study and suitability of existing switchgears, under ground power cables, over head lines etc. for installation of DPLC equipment.
* Site supervision of equipment installation and commissioning incl. Network Management System.
* Preparation of reports for submission to Authority for approval of license.

4. KL Sentral, 32 Story Condominium, Kula Lumpur, Malaysia comprising 11/0.415 kV substation and 415 V distribution – Project status ongoing

Lead Engineer position with responsibility as Owner's Engineer. Main responsibility included:

* Carrying out load flow calculation, short circuit calculation and protection coordination studies for sizing of equipments.
* Selection of contractors for electrical and control(BMS) equipments incl. overall coordination responsibility for installation and commissioning.

5. Asian Institute of Science, Medicine, and Technology, Kedah, Malaysia comprising 33/11 kV substation, several 11/0.415 kV substations and 415 V distribution – Project status ongoing

Lead Engineer position with responsibility as Owner's Engineer. Main responsibility included:

* Carrying out load flow calculation, short circuit calculation and protection coordination studies for complete power distribution system.
* Selection of contractors for electrical and control(BMS) equipments incl. overall coordination responsibility for installation and commissioning.

6. 3 x 700 MW Coal Fired Power Station, Tanjung Bin, Malaysia – Project status ongoing

Lead Engineer position with responsibility as Design Engineer to Contractor. Main responsibility included:

* Earthing grid design for power block area.

7. 110 MW Bukit Panggal Combined Cycle Power Plant, Tutong, Brunei Darussalam – Project status ongoing

Deputy Project Manager/ Lead Engineer position with responsibility as Owner's Engineer. Main responsibility included:
* Preparation of proposal for bidding for Consultancy work.
* Preparation of technical/economic proposal for the Owner to get clearance from the Department of Power, Government of Brunei.
* Preparation of tender documents for Electrical and control systems for combined cycle power plant and 66 kV switchyard.
* Evaluation of bid proposals (both technical and contractual/commercial) and preparation of evaluation report for the Owner's decision.
* Negotiations with selected bidder for electrical, control, general and commercial matters

8. 30 MW Thermal Solid Waste Power Plant incl. 33 kV substation, Kampong Baroga (earlier Bahol), Malaysia – Project status ongoing

Senior Engineer position with responsibility as Owner's Engineer. Main responsibility included:

* Preparation of proposal for bidding for Consultancy work.
* Preparation of Functional Technical Specification for the Owner, regarding Electrical Systems for 2 nos. Steam Turbine Power Plant and 33/11 kV substation.
* Review of Contractor's basic engineering documents

9. 650 MW Combined Cycle Power Plant, Perlis, Malaysia – Project completed

Lead Engineer position with responsibility as Design Engineer to Contractor. Main responsibility included:

* Design and engineering of small power and lighting system including lightning protection throughout plant area.
* Earthing grid design for power plant area.

10. 750 MW Tuanku Jaffar Combined Cycle Power Plant, Port Dickson, Malaysia – Electrical works related to Balance of Plant only – Project almost completed.

Lead Engineer position with responsibility as Owner's Engineer. Main responsibility included:

* Preparation of proposal for bidding for Consultancy work, under main Consultant appointed by TNB.
* Preparation of technical proposal and Detailed Project Report.
* Preparation of detailed technical specification, as applicable.
* Review and approval of Main EPC Contractor's proposal regarding Electrical SLDs, circuit/protection diagrams, earthing grid design, small power, lighting, lightning protection, various equipment sizing for power plant and distribution systems incl. generator transformers, unit/station transformers, distribution transformers, protection systems etc.

11. 225 MW (2 blocks of Frame 6 machines) Combined Cycle Power Plant, KHTP IPU Project, North Malaysia incl. 4 nos. 132/33/11 kV substations both outdoor and indoor (gas insulated) – Project completed

Senior Engineer position with responsibility as Owner's Engineer. Main responsibility included:

* Carrying out load flow calculation, short circuit calculation and protection coordination studies for power station and 132/33/11/0.415 kV power distribution network.
* Preparation of Functional Technical Specification for the Owner, regarding Electrical Systems for Combined Cycle Power Plants (2:2:1 configuration), 132/33/11kV Gas Insulated Substation, 132 kV conventional outdoor switchyard, 33/11 kV substation and several 11/0.433 kV substations.
* Review and approval of Main EPC Contractor's proposal of electrical SLDs, circuit/protection diagrams, earthing grid design, small power, lighting, lightning protection, various equipment sizing for power plant and distribution systems incl. generator, generator transformers, unit/station transformers, distribution transformers, 132/33/11 kV switchgears, 132/33/11 kV power cabling, protection system, substation control system (SCS), 3-level SCADA system, Building Management System (BMS) etc.
* Site supervision of testing and commissioning of electrical equipments at power plant and substations, as and when required.
* Preparation of functional specification for Automatic Meter Reading (AMR), Billing System, Trouble Call System (TCS) for power plant and distributed customers, selection of suitable contractor and implementation at site.
* Preparation of functional specification for Management Information System (MIS) for the Owner providing required information from the power plant/distribution system, selection of suitable contractor and implementation at site.
* Preparation of master plan for 415/240 V distribution system within KHTP Park for loads including housing complex, commercial customers, and industrial customers.
* Engineering for installation of new protection schemes, SCS, remote metering facilities in existing 33/11 kV switchgears of 4 different makes.
* Verification of As-built drawings at site.
* Owner's specialist engineer during 24 months defect liability period for power plant and distribution system equipment/systems especially for contractual matters.
* Evaluation of bid proposals (both technical and contractual/commercial) and preparation of evaluation report for the Owner's decision.

12. 330 MW (1 block of Frame 9 machines) Gelugor Upgrading Project for Tenaga Nasional Berhad(TNB) incl. 1 no. 132/33 kV gas insulated substation – Project completed

Engineer position with responsibility as design engineer for the main engineering, procurement and construction (EPC) contractor. Main responsibility included:

* Preparation of bid proposal for Consultancy work.
* Preparation of technical proposal for the EPC contractor for bidding the job.
* Preparation of detail technical specifications for getting quotation from several sub contractors for electrical and control systems.
* Review and analysis of sub-contractor's proposal and approval of documents for selection of equipment.

13. 120 MW, (4 Frame 5 gas turbines) Open Cycle Power Plant, Karambunai, Sabah Malaysia – Balance of Plant only (11/132 kV generator transformer, 11/0.415 kV unit and station transformers, 125 V DC system, 240 V UPS, Lightning Protection, Electrical building services etc.) – Project completed

Engineer position with responsibility as design engineer for the main engineering, procurement and construction (EPC) contractor. Main responsibility included:

* Preparation of technical proposals for getting quotation from several sub contractors for electrical and control systems for Balance of Plant items.
* Review and analysis of sub-contractor's proposal.
* Preparation of basic engineering and detail engineering documents/drawings for client's approval.
* Carrying out earth grid calculation, short circuit calculation and protection coordination studies.
* Preparation of final as-built drawings.

"August 1991- January 1998": POWER GRID CORPORATION OF INDIA LTD., INDIA

1. Supervisory Control and Data Acquisition / Energy Management System (SCADA/EMS) Project for Southern and Northern region (power sector wise) of comprising of 3 level hierarchical control and up to 500 Remote Terminal Units (RTU).

Deputy Manager / Senior Engineer positions with responsibility as in house Engineer. Main responsibility included:

* Preparation of Feasibility Report (FR) for the Projects in order to get clearances from Government Authorities and State Electricity Boards.
* Preparation of detailed project report.
* Presentation to several state electricity boards about salient technical features, advantage of SCADA/EMS system in order to get their agreement on the Project including sharing of cost.
* Preparation of bid documents for selection of Main Consultants.
* Bid evaluation for Consultant selection process and recommendation to Company's board and to World Bank for approval.
* Review and analysis of functional technical specification prepared by main consultants especially related to RTUs and control room hardware/software requirements.
* Preparation of bid documents, for selection of the main Contractor.
* Bid evaluation for main Consultant selection process and recommendation to Company's board and to World Bank for approval.
* Preparation of functional technical specification for Distribution Automation System (DAS) for DVB (earlier DESU)
* Preparation of feasibility report for implementation of distribution SCADA system in Pondichery.

2. 400 kV Substation at Gooty, Andhra Pradesh, India.
Engineer position with responsibility as an O&M engineer. Main responsibility included:

* Operation and Maintenance of Electrical equipments in 400 kV Substation.
"August 1989- August 1991": National Thermal Power Corporation, INDIA

Engineer position with responsibility as an O&M and Erection Engineer. Main responsibility included:

1. 400 kV Substation at Gooty, Andhra Predesh, India.
* Operation and Maintenance of Electrical equipments in 400 kV Substation.
* Site supervision of testing and commissioning of Relay Protection, control, switchyard equipments i.e. power transformer, shunt reactors, circuit breakers etc.

2. Central Training Institute, 720 MW Badarpur Thermal Power Plant, Delhi
Engineer Executive Trainee/Assistant Engineer position. Main responsibility included:

* Successfully completed (1) one year training course in planning, design, installation, operation and maintenance of electrical systems in thermal power plants and transmission substations incl. (1) one month special course in power system protection at Power System Training Institute, Bangalore, India.
Please detail your work history including past employers, employment dates, position held, responsibilities, and major achievements.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 3092)

Go to Search Parameters...

Brief Description

I am a mechanical engineer with 10 years experience in Material handling, Steel structurals, PEB, Steel buildings industries

Architect/landscape designer/graphics person

6 years from Military with lots of surveying .

Co-Ordination with all agents & Sub-contractors.

Effective in Inspection Trends and Hazards Identification as per OSHA requirements and standards. Has good ability in presentation of safety reports to higher authorities

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

Have one year job experience as a Ship design and Ms. degree in Naval Architecture subject .

bachelor of engineering (mechanical)

Direct and supervise work of subordinate members of surveying parties.

A highly motivated and dynamic Civil engineer with 10 years of experience in designing commercial and industrial structures. I am looking for a position of Civil Engineer/ Design Engineer in an organization where my experience and knowledge can be used to the best.

Over ten years hands -on experience in XRF spectrometry in cement and steel industry

5 years working experiance as a QA/QC Engineer

Senior manager maintenance of Drilling water well & Mining drills and Screw compressors, man power Management, Guiding and training the service engineers, maintaining records and monitor the performance

Willing and able to perform ones job with less supervision

3d visualizer, archl draftman, interior designer, renderer, max/viz/photoshop/ vray, architect

i m very hardworker

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

I have worked in the area of Geological and Geotechnical Engineering for over six years now. I am a quick learner and can adapt to other earth engineering fields. I would be a valuable asset to any firm that would give me a chance at employment.

i have 3 years of experience in structure analysis and design for industrial structures, substaton structures, Material handling plant structures. i am having strong hand on STAADPro and Autocad software.

Knowledge in Project management skills like Production control ,Costing ,Project control /Expediting ,Scheduling(Using MS Project), planning ,Preparing Bill of materials ,Procure materials ,Sub contractor control ,Quality activities ,Documents review, ITP preparations, Client meetings ,Design involv

POLYTECHNIC INSTITUTE OF BUCHAREST, FACULTY OF AIRCRAFT ENGINEERING-MECHANICAL ENGINEER-HIGH DEGREE GRADUATE

skills and experience in appointments ranging from QC Inspector, to QC Engineer in the field of Oil and Gas as a ME

B. Tech (Electrical) with more than 15 years experience in project management, design, engineering, installation and commissioning of electrical & control system in combined cycle power plants and substations

A highly accomplished gas turbine field engineer and power generation equipment service director. Experienced in turbo-electric machinery installation and maintenance, asset and contract management, profit and loss finance, electro-mechanical troubleshooting, quality control, and staff management.

Enclosed please find my detailed resume for Structural Engineer job openings you may have. As my resume will attest, I appear to have excellent qualifications for this position

Mechanical engineer (naval welding) with 15 years experience seeking a job as supervisor(superintendent engineer).

Well experienced Project Architect / Coordinator /Auto Cad Designer / Quantity Surveyor

Feasibility studies, Process Design & Consultation, process Development , Project Management, Electro-mechanical installation, Pre-Commissioning & Commissioning, Start – up & Operation of Industrial Projects

Health, Safety Environment Engineer/ officer &

Marine Civil Construction Supervisor

Comprehensive problem solving abilities, good verbal and written communication skills, Ability to deal with people diplomatically, willingness to learn, Team facilitator.

Bachelor of Science of Electrical Engineer, Drafting Aide Certificate AutoCAD 2009, CAD Operator Certificate AutoCAD 2009, Member of Phi Theta Kappa International Honor Society, Member of National Technical Honor Society, Dean List for 2008-2009

Almost 28 years working in EPC at OIL & GAS.

Senior Structural Designer/Construction Support Specialist

I'm A Civil Engineer graduate with 14 years experience in the Gulf country seeking for new job.

Fifteen years of experience in piping construction and piping engineering activities related to projects for oil production facilities, oil refining and industrial plants.

Registered Safety Officer (IBOESH, USA), Registered Civil Engineer-Philippines, IASP, IADC, RIGPASS Certified

Civil Engineer specialized on Structures working towards Masters Degree.

I am a qualified mechanical Engineer specialized in Acoustics

Mechanical Supervisor

Planning & Scheduling Engineer with more than 4 years experience in India & Gulf

Almost 14 years of experience in the Project engineering, system design and detailed engineering of 400/220 kV AC substations and ¡Ó500 kV HVDC Substations.

25 years experience in OSP project management, inspection, route selection, planning and engineering - Bilingual English/Spanish

Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,

Transmission Planning Engineer, BES Operations Engineer, PTI/PSSE Consultant

Electrical Engineer with 12 years experience mainly with GE USA in the field of industrial project in steel, power and coal sector

Qualification Bachelor Degree in Civil Engineering Total Professional Experience 14 Years and 2 Months –Include 4 years and 9 months in Singapore & 2 yrs. in Malaysia.

Electrical Engnineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out