Resume - 6 years experience in construction of gas pipelines & piping systems, current jo...

Misco Jobs

Resume #25383

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE
Construction of oil & gas transmission Pipe lines and piping systems

EDUCATION
B.S.c. of engineering – Higher Technological Institute – 10 th of Ramadan City -Egypt – 1999
Specialization: Mechanics

Above graduate specialization technical Courses

- ASME B31.8 Gas transmission & distribution piping systems – ASME & AUC April 2005
- ASME SEC.IX Welding & Brazing – ASME & AUC May 2005
- ASME SEC. VIII DIV.1 Design & fabrication of pressure vessels – ASME & AUC May 2005
- Projects feasibility studies - American University in Cairo, Feb.-May 2004þ
- Occupational Health & Safety for implementers & Auditors – DNV
February 2004
- Corrosion control by cathodic protection - American University in Cairo, June-
July 2004
- Environmental Management systems Documentation & Internal Auditor DNV February 2004
- Welding Inspection Technology – ISES, February – June 2003
- Principles of Natural gas distribution networks – AGSM Verona Italy, August 2000
- Fundamentals of welding & welding technology- American University in Cairo, September 1999 – January 2000
- Inspection & testing of engineering products - American University in Cairo, September 1999 – January 2000
- Quality engineering - American University in Cairo, September 1999 – January 2000

PERVIOUS EXPERIENCES
- Current job since May. 2003:
Piping & Pipe line Construction senior eng. at National Gas Company which has the concession right of Natural Gas distribution network for the area of Eastern Delta - Egypt

Involved Projects:
0 Construction of industrial and residential Gas distribution network for Zagazig city, with capital cost of 45 million USD.( june2004- up till now)
Project comprises:
I- Construction of main pressure reduction & metering station with capacity of 50,000 SCM/H
II- Construction of 20 km steel pipeline networks (16"/12"/10"/8") with high pressure(70 bar) & Intermediate pressure (7 bar)
III- Construction of 22 supplementary reduction stations
IV- Construction of polyethylene Medium (4 bar) & low pressure (100 mbar) network with a total length of 300 km
V- Construction of internal network for 5 industrial planets
VI- Construction of external & internal installation for 60,000 residential & commercial customer

* Construction of Industrial and residential Gas distribution network for Tenth of Ramadan city, with capital cost of 48 million USD.( Jan 2002- Jan 2005)

Project comprises:

i. Construction of Main pressure reduction & metering station with capacity of 100,000 SCM/H
ii. Construction of main residential Gas pressure reduction & metering station with capacity of 20,000 SCM/H
iii. Construction of 20 km steel pipeline with high & intermediate pressure iv. Construction of medium & low pressure polyethylene network with a total length of 300 km v. Construction of Internal network for 42 industrial planets vi. Construction of External & Internal installation for 48,000 residential & commercial customers

Job Responsibilities:
* Managing of contractors for execution of works in compliance with quality, budget & time requirements
* To direct the supervision crews to inspect, review, approve all the phases of construction activities according to Drawings, specification, codes & standards.
* Assist construction crews to solve site technical construction issues.
* Review & approval of material issue requests from construction contractor
* Hold periodical project review meetings with the stuff & construction contractors
* Review & approve / comment progress report issued by contractors in conjunction with project control engineer.
* Assess in coordination with the project manager the variation orders requested by contractors for construction activities & supervise their execution.
* Review & approve project QC / QA file.
* Review & approve project as built drawings

* Previous job from August 2000 to May. 2003:

Piping & Pipe line Construction site eng. at National Gas Company
Involved Projects:

- Construction of Industrial and residential Gas distribution network for Belbise& Abo Hamad cities, with capital cost of 42 million USD.

Project comprises:

I- Construction of Main pressure reduction & metering station with capacity of 20,000 SCM/H
II- Construction of 50 km of steel pipelines (12"/10"/8") with high pressure (70 bar) & intermediate pressure (7 bar)
III- Construction of 14 supplementary stations
IV- Construction of medium (4 bar) & low pressure (100 mbar) Polyethylene network with a total length of 235 km with different sizes from 32 mm to 250 mm
V- Construction of internal network for 66 industrial & commercial customer
VI- Construction of external & internal installation for 32,700 residential customer

Job Responsibilities:
* Inspect, review & approve all phases of construction activities related to pipeline & piping systems according to Drawings, specification, codes & standards.
* Solve site technical construction issues
* Check & endorse material use sheet.
* Monitor the construction progress according to short term look-ahead & issue progress reports
* Review of as built drawings.
* Review of QA / QC project file

* Previous job from June 1999 to August 2000:

piping engineer by the Tripartite Contracting Group
Involved Project:

- Construction of Suez Steel Planet Piping networks, with a total capital cost of 1 million USD
The project is including of, but not limited to:

I- Internal gas distribution network
II- Firefighting distribution network
III- Water cooling circuit
IV- Piping systems of Three Pumping Stations

Job Responsibilities:
* Manage the working crew to Execute the construction activities according to Drawings, specification, codes & standards
* Managing of construction crew for execution of works in compliance with quality, budget & time requirements
* Solve site technical construction issues
* Issue material use sheet.
* Issue periodical progress reports
* Issue as built drawings
* Issue working crew time sheets

SKILLS
Language skills: Fluent spoken and written both English and Arabic.
Computer skills: Auto-CAD, Micro soft project, WinWord, & Excel
Reporting: Wording, Tables& Graphs.

PERSONALITY:
Highly initiative, prefer to work in a team work environment & always make effort to gain experience.

References
Furnished upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 2820)

Go to Search Parameters...

Brief Description

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

Experienced Regional Manager (Russia, CIS, Eastern Europe), liaison between the US and overseas sides of operation.

Project Safety Advisor

Electrical/electronics , mechanical, hidraulics knowledge

12 plus years of diversified project management and controls experience (EPC) oil and gas (upstream and downstream) industry. Assignments have ranged from Project Mgr, Project Controls Mgr, Lead Scheduler, Lead Cost and other project controls positions from large cap to small maintenance projects

Engineer / EMS / SCADA / Electrical / Telecom / Power Sector

Survey Party Chief ..... Will be relocating to Colorado or West Coast this spring.

Computer networking, electronics services and repairs computer maintainace communication system and intercom. Electrical power system,control systems and automation. I am holder of a Liecentiate in electrical engineering and a certificate of enginnering in electrical and electronics enginneing

Senior Welding Inspector CSWIP 3.2 Senior + Rad Interpretation

25 years of gas plant construction, commissioning, startup and operations. Also gas treating and transmission experience. 3 years in Syria, 1.5 years offshore Dubai.

I am a 3rd year student pursuing a B. Tech (Honors) Degree in the Department of Civil Engineering along with a MINOR degree in the Department of Computer Science &engineering at theat Indian IIT Kharagpur ,ranked as number one institute of INDIA . I have an excellent academic record .

Intensive and hands on experience in Incoming Quality Control (IQC), Process Quality Control (PQC), Outgoing Quality Control (OQC) and QA Reliability with deep understanding of ISO 9000 and TS16949

More than eight years of automotive industries R&D experience in engine design, development and testing with India’s leading automotive and diesel engine manufacturers.

A dedicated and enthusiastic Master’s graduate in Control Systems & Instrumentation with two years job experience in the industry

MS in Environmental Engineering - Geo-Resources Emphasis ( 5years )+ Diploma of Specialization in Mining Sciences and Technologies (Post-graduate Research 3 years) - Freelance experience in QUARRY PLANNING-DESIGN and ENVIRONMENTAL ASSESSMENT (2 years)

Primavera Expertise & P3e for construction,Integrated support with SAP Module (PMS-MMS SYSTEM),Databases (for dealing with Talisman, Artrims and Pyramid),MS Office Suite Package,Bachelors In Mechanical Engineering CGPA 3.70,1ST DIV, University of Engineering & Technology, MEHRAN-HYD-PAKISTAN (Chart

MEHCANICAL ENGINEER with More Than FIVE Years Of Work Experience In MECHANICAL MAINTENANCE. PROEJCT & HYDRAULICS Department In Pipes Manufacturing Industry. Also Having Experience In Sheet Metal Manufacturing Machinery Development Fabrication , Erection & Commissioning Activity At Site.

Industrial Projects CAD Operator

Mechanical-Piping Engineer - experienced in piping and procurement related activities for both offshore as well as onshore facilities

1. Mines planning engineer. 2. blasting engineer. 3. excavator incarge. 4. suppervisor. and 1. Bachellor of Engineering (Mininig Engineering). 2. Blasting Certificate.

1. Specialized in Occupational Health, Safety & Environmental Management System in Industrial Establishments & Enterprises; in Health Care Facilities and Biotechnology & Pharmaceutical Companies; 2. Expert in Risk Management & Loss Prevention and 3. Talented Trainer in Occupational Safety & Health

6 years experience in construction of gas pipelines & piping systems, current job: senoir pipelines & piping eng. by National Gas comp. Successfly complet 12 above graduate technical courses including ASME B31.8, ASME SEC.IX & ASME SEC VIII DIV 1 and I am hopping to complet ASME B31.3 by June 05

As a Project/Contract Mgr, my background is in Construction. I have worked with Owners/Clients, Architects, & Engineers. I am experienced in continuous improvement in construction, process, & people mgmt. I'm experienced in business & project mgmt in small, large, & mega const. projects.

Diploma in electrical engineering with12 years experience of electrical intallation and commissioning in Oil and Gas , Pectrochemicals projects

I am very interested in finding a position in your organization where I can best use my skills and further improve my knowledge. My education, along with my professional experience, my passion for learning and the knowledge of the latest technology, makes me an excellent candidate.

12 years international sub-structure civil engineering experience.experienced heavy equipment operator.

Scaffolding Manager

I have successfully participated in medium and large scale projects within a variety of high profile companies. These experiences gave me the opportunity to develop a strong knowledge in administration, procurement and commercial sectors, and get a broader view towards mangement strategies.

I am a Chemical Engr from REC Surathkal (one of India’s top 10 Engg. Colleges) and have almost 9 yrs of exp in techno-commercial management of Proposals & Projects, in multi-sectored industries (including O&G, petroleum, water, Engg. Consultancy & pipeline coating).

Crane/Rigging Trainer, Crane/ Lifting Equipment Inspector, Safety Advisor, Crane/ Maintenance Engineer, Rigging Supervisor, Terminal Supervisor

Recent graduated geologist. Looking for a challenging career in geoscience anywhere in the world. Good comunication and teamworking skills

HVAC Central Air Conditioning

Chemical or Laboratory Technician in Edmonton Alberta

Civil, electrical, and mechanical inspector

Twenty nine years experience in Project Management, Quality Control, Quality Assurance, Engineering, Technical Research and Development, Auditing, Vender Surveillance, Metallurgy, Welding, and Inspection.

I'm specialized in developing new water based decorative paints and in modifying existing decorative paint formulations.

Qualified Quantity Surveyor with experienced in Cost Planning, Estimating, Budget Control and Monitoring in building, construction and semicoductor industries.

construction/process plant cost estimator, certified project scheduling, projects control

Diploma in Mechnical Engineering with 5 years & 6 months of experience as Document Controller in Marine Tank Farm site of Reliance Petroleum Ltd. Jamnagar.

Dual Post Graduate Mechanical Engineer with 10 years of experience

Muliti-storey, Precast Panels, Site Retention, Demolition, Project Management, Structural Steel, Asbestos Removal, Re-roofing

Basic automotive schooling at technical school. One year automotive experience and three years work on Semi Tractor and Trailors

Skills - Design, Procedures, Projects, Commissioning, Calibration, Maintenance. My qualification is Instrument/Electrical Engineering Technician. I have in Nuclear Power Plant, Chemical, Mining, oil and Gas Industry in Europe and Australia

If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.

Management -Technical Skills: Catia,Solidworks-Mechanical Desktop-AutoCAD-FEA-Carrier-MasterCAM-Microsoft Office(Word,Excel,Powerpoint)-Windows(98,XP,Vista)

Engineering

Mechanical Engineer with 10 years of experience in QA/QC, and MWD/LWD/Directional Drilling services

Repairing & Troubleshooting Computer Hardware, Printer’s and UPS etc. Data Communications & Computer Networks (Networking using windows OS 95, 98, NT, Active Directory & ISA Server). Familiarity with LINUX OS (Installation & Configuration). Electronic Devices and Circuits. MS Office.

Broad experience in Petroleum Exploration and Production With cross-functional expertise in Operating, Commissioning, Maintenance, Testing, Training and Safety / Environmental Compliance.

AutoCAD, Office, CFD (Computational Fluid Dynamic), Basic Electric, Mechanical and Hydraulic.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out