Resume - Moniitoring and implementation of all related painting/coating/lining works invo...

Misco Jobs

Resume #25706

CONTACT INFORMATION:
View contact information...

Position Applied For: Painting Inspector Cum Supervisor

Latest Salary: Dh 6,500 Pm

PROFESSIONAL / EDUCATIONAL QUALIFICATION CAREER
1) B. Com. Graduation
2) B Gas Course Done In Abu Dhabi.
3) Knowledge Of Computer Applications.

TOTAL WORK EXPERIENCE (TECHNICAL / OPERATION): 1 5 Years Experience

Working Experience In Detail As Below With Following Process Plant.

1) Presently Working With Ramsis Engineering In Ruwais, Abu Dhabi.
Position Held: Painting Inspector Cum Supervisor
Tenure Period: From 8/6/03 Till Date
Responsibility: scope of work and responsibility includes the monitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department. This also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environment conditions with strict quality control and handover of the same to the area authority on the completion.
Main duties also includes the supervision of all painting works carried out in compliance with co painting spec/manuals and also the quality control works as per the quality control plan, completing all necessary inspection requirements, inspection reports, daily logbook of work done and maintaining permanent records for each activity for the project work.
Contribute with other construction engineers in the project so as to achieve smooth and safe implementation of the project works.

2)AHMED MANSOOR AL- A'ALI CO. BSC(c), Kingdom Of Bahrain.
Position Held: Painting Supervisor
Tenure Period: From 23/5/99 To 28/2/2003
The Project Job Involved In Kingdom Of Bahrain As Below

1) Supervision of painting of 12 Nos. Potable Water Storage Tanks for Ministry of Electricity and Water.
2) Supervision of painting works for upgradation of existing Fume Treatment Plant for the extension of Alba (Aluminium Bahrain).
3) Supervision of painting works for modernize instrumentation and control LSFO and FCCU complexes of Bapco (Bahrain Petroleum Company)
4) Supervision of painting works for Anode Baking Kiln-2 conversion project of Alba.
5) Supervision of painting works for Decommissioning of RJ1 Satellite communication Antenna of Batelco at Earth Station.
6) Painting works of Structural steel works for Hidd Power Plant Phase – 1 & II for Ministry of Works.
7) Maintenance of West Elevated Storage Tank (Internal) at West Riffa Blending Station.
8)Maintenance of Refinery Roundabout Elevated Storage Tank (External)
9) Blasting and Painting works of Roof structure for Silo-1 and Silo-2 for ALBA.
10) Maintenance of Elevated Storage Tank at Sanabis for Ministry of Electricity and Water.

3) CAPE EAST WLL., Doha-Qatar
Position Held: Painting Foreman
Tenure Period: From 17/3/1998 to 16/3/1999
Responsibility: supervision and painting work of heavy structural coating, tank lining and industrial blasting and painting of all fabricated heavy structures.
Proper utilization of manpower as per the requirements at different sites.

4) NAM PREMATOR WLL, Hidd, Kingdom Of Bahrain.
Position Held: Painting Foreman
Tenure Period: From 16/8/1994 To 15/5/1997

Work Involved In Tank Blasting And Painting, Hull Blasting And Painting In Asry Shipyard Bahrain.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 3119)

Go to Search Parameters...

Brief Description

ZTE Pakistan (Pvt.) Limited: - Currently I am working as MSS Engineer in the O&M Team in the Telecard CDMA WLL Project .Installed & Commissioned ZTE ZXC-10 MSC, HLR..Operation & Maintenance of ZTE CDMA Network Elements like ZTE MSC, HLR and VLR.

B.Sc. in Civil Engineering (CE), Bangladesh University of Engineering & Technology (BUET), Merit scholarship recipient in every under graduate level (Second grade)

IM Supervisor, DM Manager, Expediter, Technical Writing skills in authoring procedures, Business Development with Green conceptual ideas

I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.

I have wide experience (more than 22 Years) in Maintenance & Project field in Ammonia Refrigeration Plant, ice-cream, Dairy & Pharmaceutical Industries.

Supervisor maintenance and of trades/millwright / mechanic/water/rail

A results-focused manager and leader who drives project teams to deliver outstanding results. Professional Engineer with 21 years of diverse experience in the hydrocarbon processing and minerals processing industries. Has exceptional experience on owner & EPCM teams.

Heavy Industrial Fitter with extensive experience on Fixed & Mobile Plant & Machinery. I have worked in Cross Cultures as a Mechanical Trainer/Supervisor.

Geodetic Engineer exposed to various types of horizontal and vertical survey and can handle different geodetic engineering position.

Geologist / Geotechnical engineer

Piping Field Planner/Engineer through 15 plus years journeyman experiece in the industrial construction industry.

Working in Saipem and SNC lavalin joint venture Saudi Aramco water supply and injection project in SA, as a Instrument Pre-commissioning Supervisor (sub contract) last one year.

Over six years of experience in geotechnical engineering including earthquake engineering and mining engineering. Has performed numerous analyses in ground deformation, lateral spread and foundation settlements caused by static and seismic loading using both traditional analytical methods and advanc

Skills include: mechanical maintenance management, process engineering, project management, documentation and training, planning, procurement and contract management, budgeting, and sales.

INSTALLATION PIPELINES

Broad knowledge base and experience in both the design and construction of oil and gas facilities. Forward thinking individual with the ability to take on many tasks at one time. Motivated leader focused on building strong professional relationships.

Near 13 years of professional work experience in the oil and gas industry, working experience on the on/off shore in Iran and extensive experience in oil and gas unit processing, reservoir engineering and well completion engineering.

Qualify E&I Site Supervisor, QA/QC Inspector, Project Coordinator, Project/Electrical Engineer and as well as Construction Manager. Excellent Documentation Skill for Project Management.

I am a Postgraduate Civil Engineer trained in "PROFESSIONALS IN PROJECT MANAGEMENT( PRIMAVERA 6.1 & MY PRIMAVERA)" FROM CADD CENTRE .I have both Bachelors and Masters Degree in Civil Engineering.My specialization in M.Tech was Construction Technology and management,.

Electrical Installations and Commissioning Engineer in Low/High Power Distributions

Open Pit Slope Design, Tailings Dams, Plant Foundation Investigations, Earthworks

Design, Detailed Engineering, Engineering of DCS-Honeywell EPKS & Yokogawa Cenum CS. valve CV, Flow Element, PRV sizing. Foundation Fieldbus. FATof DCS. INTOOLS, InstruCALC, SPR. P&ID development. HSE member at FLUOR

5 years experience in piping stress analysis using CAESAR II in reputable companies

Experienced in Construction of Offshore/Onshore Oil &Gas plants in the field of Fabrication, Installation, Hydrotesting & Pre-commissioning of In-plant/Well Head Piping and cross Country Pipe Line. Qualification: Bachelor of Engineering (Mechanical)

10+ yrs experience in construction field with specialized in RCC structure & refractory material installation.

Completed Amusement and water Parks project in India and Bangladesh. I am Civil Engg. Diploma Holder. It is 3 year course.

Just I have graduated from Sheffield Hallam University in UK on October 2002 and looking for work opportunities throughout USA

I am a recent college graduate who majored in Civil Engineering Technology and is seeking the opportunity to gain experience, as an Entry Level Civil Engineer.

Engineer looking for job in construction industry in Los Angeles area.

The purpose of this resume is to define and highlights the skills and ability to work as a Planning Engineer. I secures 5 year of working exp. as Maint. Planning Engineer and Proj. Plan Engr. in Petroleum Refinery and for the const. of Pet.chem. & Steel Plant respectively.

Experienced Project Manager/Engineer

Diploma in Mining Engg, AMIE Sec A&B in Mining Engg from IEI.

Urban Planner with GIS and AutoCAD skills

-Planning and scheduling using Primavera Project Planeer P3.1 &P6, Microsoft Project Professional / Structural Engineering Design Using Computer Softwares such as STAAD-PRO 2007, ETABS, SAP2000

Passed in diploma in civil engg in 2009 with 84.9%.

Moniitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department.this also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environm

Electrical Technician/Cell Phone Technician

Project Management

Mining engineer and experienced manager with over 20 years of successful executive management, project development, engineering, construction and operations experience in the mining, tunneling, fossil power, rail and heavy construction sectors.

Seeking position as HSE/Training/Emergency Management for Petrochemicals or Refinery Operations

Construction Management professional with Heavy Industry ,Power, Energy, Mining sector experience

Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.

10 years of professional experience in commissioning trouble shooting and servicing heavy-duty diesel engines. Presently working as Senior Service Engineer, responsible for field service of Cummins Diesel Engines. I possess strong academic credentials and good communication skills.

An Entry level position within a growing industry that takes advantage of my electrical engineering education and skills.

A highly motivated, ambitious and systematic individual with exceptional interpersonal skills •Presently doing Masters in Mechanical Engineering with one year of full time experience as Design Engineer working on PRO-E.Proficient in Pro/Engineer 2000, Wildfire, Pro/Mechanica.

Strong structural engineering knowledge, Energitic, Good analitycal thinking, Self motivated, Hardworking, Dedicated person, Able to work under pressure.

LARGE AND STRATEGIC PROJECTS MANAGEMENT - BUSINESS AND OPERATIONS MANAGEMENT

Mechanical Engineer,masters in Engineering Design,CATIA V5,SOLIDWORKS

Qualification: Diploma In Civil Engineering(3Years), Over 11 years experience in Land surveying, the majority of which has been spent gaining experience of Surveying works using modern surveying equipments and Surveying software.

B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out