Resume - Chief Engineer (Manager) in Technical Office for a large construction progect :H...

Misco Jobs

Resume #26149

CONTACT INFORMATION:
View contact information...

Designation: Technical Office Manager of construction project

EDUCATION
May 1989 Complete the preliminary year towards the M.Sc. Degree in Structural Engineering, Cairo University.
June 1987 Bachelor of Science in Civil Engineering.
Cairo University, Giza, Egypt.
Grade: Very Good with Honor Degree (80.7%).
Grade Point Average (Major) - 3.2 / 4.
Grade Point Average (Cumulative) - 3.0 / 4.
Graduation Project: Concrete Design with a V.Good rate of Appreciation.

WORK EXPERIENCE

SAUDI BENLADEN GROUP,
Rush Projects Department- Cairo
Oct. 2004 - Up to date
Chief Engineer in Technical Office for the project of Development Of King Abdul Aziz Endowment For Mecca Holy Haram Project. The project with an Estimated Value of 1.5 billion $ and Considered as the Highest Concrete Residential and Commercial Complex in the world. It has 1,400,000 m2 Gross Built Area with a Total Height of 477 m from Ground Level. It is Consists Podium with 16 levels with area of 35,000 m2/ level and 7 Towers above Podium with 560,000 m2 Floor Area. Also there is the A/C Plant building for the complex and for the future extension of Haram. The Consultant is Dar Al-Handassah.
Responsible to follow up, check and review work for three teams (5 Engineers each) for two Towers and the A/C Plant building. The main job responsibilities are as the following:
- Preparing and checking structural shop drawings with B.B.S.
- Reviewing and coordination for other shop drawing aspects (Electromechanical & Architecture shop dwgs).
- Preparing proposals and RFI's to facilitate construction.
- Planning for submittals of shop drawings, taking into account site priorities.
- Follow up for shop drawings production rates, and provide solutions to improve quality.

KUWAITY TECH CONSULTANTS - KUWAIT
July 2003 - Oct. 2003
Senior structural design Engineer Participated in the design and following projects according to ACI code:
- Al-Zour Power Generation Station - Al-Zour-Kuwait
Structural detailed design for buildings and shop drawings for all buildings
- General Health Building - Kuwait

ASCON /ETA - NABCONTRACT - ECTTP J.V. - CAIRO
July 2002 - May 2003
A Technical Office Manager for Construction project of Tunnel under Cairo Ring Road at ElKattamia (25 million L.E). The project was made to serve the Maadi City center Commercial Mall and Carfour Hyper Market the project consist of the following:
- Construction of tunnel of R.C walls and foundations and steel beams roof girders with R.C slab Decking with open cut method having temporary detour for traffic diversion of ring road.
- Permanent Utilities diversion for 400 mm D.I water pipe with valve rooms, also 600mm sewage pipe with manhole with depth of 12 m under road both are crossing under road through R.C sleeve of 1700mm pipe also electrical cables were diverted using thrust boring.
- Construction of Roads for mall and its approaches having electrical illumination, storm water drainage, side walks and Embankment tiling, signage and road marking and also all necessary landscaping items.
Responsible for the following:
- Reviewing and preparing of the shop drawings for different Aspects of items.
- Following up of the time schedule, making daily and weekly report for works to the consultant.
- Making submittal for materials and documents to get consultant Approval.
- Preparing and updating for Quality and Environmental plan, Quality Assurance, Quality Control, and Health & Safety Manuals for ISO 9000 - 2000 certificate.
- Preparing subcontractors Contracts and Invoices.
- Preparing of Claims and variation orders study.
- Preparing monthly valuation for the executed works.

SIGMA for Engineering and Construction - CAIRO
Aug. 1995 - June 2002
A Projects Manager of contracting company specialized in supplying and installing of sewage or water main pipe networks, giving the technical support for the projects construction, planning for site, follow up of Execution and studying tenders.

CAMPENON BERNARD - SGE - CAIRO
Nov. 1993 - June 1995
Senior Technical Engineer for the project: GREATER CAIRO METRO LINE 2 - Joint Venture for Civil Works (JVCW) - Design Department, Making full reinforcement calculations preparing and Reviewing of Shop drawings and B.B.S, and follow up for Execution for the following main structures:
- Under Ground Stations of ELKHALAFAWI and ST. THERESA (21.0 width x 155.0m Long x 22.0m depth),
- Annexed Structures (utility under ground shafts along the Tunnel varying from 4.0-5.0m in width and from 10.0 - 22.0m in length and 22.0 - 30.0m in depth).
- Connection Structures between Annexed Structures and Tunnel, taking effect of sequence of construction and earth pressure loads, Uplift loads and tunnel forces due to removing of tunnel segments.

ARAB CONSULTING ENGINEERS - CAIRO
(MOHARRAM - BAKHOUM)
July 1989- Oct. 1993
Structural Design Engineer participated in the design for the following projects:
- Homoud Tower in Kuwait:
- Extension of the Arab Consulting Engineers Headquarters, Dokki, Cairo:
Analyses and design of paneled frames in space under vertical, wind, seismic (UBC zone 2B), and temperature loads were made. Frames consist of five stories flying over the existing five-story structure. Frames supported on micro-piles foundations.
- Extension of King Abd El Aziz University, Jeddah.
- Safir Hotel extension, Giza.
- Greater Cairo Metro Line No. (2) - Basic design stage:
Joint Venture SOFRETU-EHAF-ACE, Analysis and design of different elements for the under ground stations (Rod ElFarag, Masarra, and Al Awkaf stations).
- Omar Afandi Multi-Story stores at Nasr City, Assiut and Quesna.
- Tourist Village on the North West Coast of Egypt (Reviera):
- Egyptian German Telecommunication Industry (E.G.T.I.) in 6th of October City.
- Beni Suef Cement Project:
Reviewing and checking of calculations and reinforcement work shop details of contractor KOBI STEEL Ltd, Japan, according to DIN code.
- El Shaheed Abdel Moneim Riad Tunnel at Alexandria:
Complete analysis and design of Skew Prestressed Concrete Roof Slab was made. Finite Elements analysis using shell element, and approximate grillage analysis was used, to discuss the distribution of moments due to transverse loads and due to prestressing forces, also the distribution of the In-plane forces, during phases of construction. This slab type is considered as the first of its kind in the country with 27.0 m edge span and 0.9m in thickness.

SPECIAL SKILLS
Computer skills:
- Excellent knowledge in using SAP2000, and Windows, Excel, Word and AUTOCAD.
- Made some programs to design and check of sections according to various codes with BASIC and FORTRAN computer languages.
Languages
- Arabic (Mother-tongue). - English (Fluent).

REFERENCES Furnished upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 3118)

Go to Search Parameters...

Brief Description

LAND SURVEYOR

Seventeen years experience in electrical engineering design, construction supervision, commissioning & start-up for major international EPC and Consulting firms specialized in power generation, T & D grids, oil and gas petrochemical fields

Summary of Qualifications,Combined experience in Industrial Refrigeration Technician / Electrician Technician in the Pharmaceutical Industry,Petro chemistry, Building Management System (BMS), Ship Systems, Maintenance and Troubleshooting.

Design engineer

25+ yrs progressive exp. as a Sr. Supervisory Planning/Scheduling & Project Control Engr/Mngr with Risk/Contracts Exp, Int'l w/Utilities, EPC Firms/Consultants, Turnkey OEMs and Constructors within the Energy Sector. P3 Ver.3.1, Primavera P3e/cVer.5, 6.2,Pertmaster, Claim Digger, MS Office, Acrobat

Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen.

The majority of my 15 years of experience has been applied to inspecting in-service pressure equipment and piping in a refinery setting. I am an excellent communicator with exceptional organizational skills geared toward inspection, NDE planning and crew leadership.

Mechanical Engineer with over 20 years experience in major Oil & Gas Construction and Maintenance. 12 years in Project Management, 10 years in Pre-commissioning/Commissioning and Start up of various facilities, 12 years in Installation, 11 years in QA/QC Inspection.

Chief Engineer (Manager) in Technical Office for a large construction progect :High Rise building, Under ground Metro line, Industrial projects, Preparing and checking structural shop drawings with B.B.S., Coordination, Methods for constructions, using ISO 9000 - 2000 Prep. of Claims and V.O etc.

Senior Planning Engineer well versed with Primavera, Suretrack, MS Project

Technical office Manager.

Urban Roads and Highway design, Traffic and Transportation planning

Contract Negotiations, Quantity Surveying, Project Handling & Project Implementation, Project Co-ordination

Civil Engineer from REC Kurukshetra, India. Working as Assistant Manager (Civil) with Larsen & Toubro Limited - ECC Division

multi skilled engineer

To offer services as Senior piping designer for onshore and off shore oil and gas projects by using PDMS & PDS 3d model system

TO WORK AS A HVAC SALES MANAGER IN A CHALLENGING HVAC INDUSTRY.

International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

7 YEARS OF RIGGER EXPERIENCE

Diploma In Mechancial Engineering+NEBOSH Level-3+Environment, Health and Safety Management Specialist Certification from NASP of USA+ ISO 14001:2004 & 9000:2000 Certified Lead Auditor with 15 Years Experience in Oil&Gas as HSE Advisor/Engineer/Supervisor/Coordinator/

Mechanical Engineer Professional experience of 35+ years in Engineering and Project Management

KEY RESPONSIBILITIES :1. Transmission engineering in designing backbone links,2. Transmission network design, link budgeting for transmission links,4. Planning of STM-1 Ring Network in City and Backbone to have a Reliable Network with a uptime of 99.99%,6. Microwave Projections for the additional Si

Landscape Arch with varied experience of the micro and macro level design and execution of private and govt. projects

To secure a challenging position with a dynamic organization which will enable me to apply my education and creative skills to the benefit of the organization?

Planning Engineer, Certificate of degree Dr. of Philosophy

Professional graduate engineer experienced in Facilities Management, CMMS implementation and application, Technical Writing. Recent 16 months in Kazakhstan. Interested in contract work (rotational or short-term)

I am a Mechanical Engineer with around 9 years of experince, with knowledge in construction project manage. Desing of wellhead equipment, and drilling equipment, certified in none destructive examination.

I have done my M.S.(Control System Engineering) from Texas A&M University-Kingsville with G.P.A as 3.9 /4.0. I am looking for a job of control System Engineer. I have work experience of 1 year and 4 months. I am willing to relocate anywhere in USA. Thanks Rajesh

15 years of experience in repairs and maintenance to construction plant and machinery and 10 years at supervision/managerial level Plant predominantly Caterpillar

Skills: Contract Negotiation, Quantity Surveying, Project Handling & Project Implementation, Quality Control, Co-ordination with various agencies involved in project

Experience in quantity surveying, site supervision, planning, designing over water and over land structures.

I am a Naval Architect and Marine Engineer whom objective is to provide engineering solution in a merit driven environment with an opportunity for career development to face present and future challenges.

Looking for a position with an established engineering company, utilizing previously learned skills

I am a Mechanical engineering diploma holder, over 15 years of experience with CSWIP Plant Inspector, CSWIP 3.2, AWS CWI and ASNT LEVEL II in RT, UT & MT, with valid UAE driving license.

Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.

I have bachelors in mechanical Engineering and Masters in Petroleum Engineering.I have working Experience in Pipe line and EPC Companies

MEP Manager with 14 years of int'l exp. in construction. Verify design, construct and commission. Executed prestigious & high rise buildings project which MEP works value in excess of US$380 M. Supervise and coordinate work acc. to contract ,budget, time, co. procedures & ensure client satisfaction.

Mechanical Draughtsman (AutoCAD,AutoCAD Inventor.)

responsible for the day-to-day operation and control of a CISCO based communications network.

Estimation and Costing,variationsnad claims,Monthly Progressive Bill preparations

A Wide experience in drafting in major of civil works, structural, mechanical, Piping & Instrumentation and architectural drawings, 8 years of overseas experience,Overall 15 Years of working experience in civil, structural, mechanical, piping, and architectural firms

More than 13 years post qualification experience out of which 7 years in Occupational Safety and Health, (4.5 years in oil and gas sector) interested in the development of modern techniques in the construction and oil field industry

Bachelor of Science in Civil Engineering

Rotational Power Infrastructure Manager & International Quality and Safety Systems Management

Civil Engineer, Civil maritime engineer

Computer ?Automation & Controls Engineer

PROFILE: Proficient in shuttering works, Steel reinforcement & fabrication, pipe fittings

I am a Senior Planner/ Project Controller with certified versatile capabilities and experiences in different fields of construction, including, but not limited to, Building construction, massive civil work, industrial construction, petrochemical construction, commercial complex and high rise buildin

Having six years of experience in managing various geotechnical projects with expertise in planning and execution of geotechnical investigations for mega industrial project sites incorporating all significant aspects.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out