Resume - I have the experience of complete Electrification of UP Petrochemical Plant and...

Misco Jobs

Resume #27315

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To be part of growth oriented dynamic organization, which may provide
Substantial opportunity for using my professional expertise and give opportunity to continuously enhance my skills.

PROFESSIONAL QUALIFICATIONS:
BE Electrical from Jamia Millia Islamia
MBA from IGNOU

SOFTWARE KNOWN: MS Office

TECHNICAL SOFTWARE: Expertise in Autocad2000, Primavera, MS Project
ETAP400, DIGSI4.3, STEP7

EXPERIENCE: 17.5 Years

Experience Abroad: Three and half Year abroad

Special Equipment Used: Freja RTS21 for electrical testing

WORKING EXPERIENCE
Presently working as HOD Electrical in DS Construction since 02/10/2004 in LIBYA.
Presently controlling the following projects
1) SNCC Building
2) 2 No. 400KV/220 KV Substation (Completed)
3) Surman Waste Water Treatment Plant
4) 35 No. 11/.4 KV substations
5) Rasnaluf Oil Refinery Gas Store and Gate House

ACHIEVEMENTS
1) Saved the company 11.424 million Euros and 2.366 million LD
February 2004 to August 2004
Organization: Reliance Energy
Designation: Project Co-ordinator

Major Responsibilities and Assignments
1. Complete Project Co-ordination of Tau Devi Lal Thermal power Station of 2x250MW
2. Design Co-ordination of various Packages like CHP, AHP, Fuel Oil Handling system, Air Conditioning, Fire Fighting etc

October 2002 to January 2004
Organization: Plant Electrical Instrumentation Pte Ltd

Designation: Astt. Manager (Electrical)
Major Responsibilities and Assignments

1. Complete site management of UMCI site.
2. Design and Engineering for Electrical portion of various projects at ExxonMobil
3. Installation and Commissioning of HV Panel, LV Panel,6.6KV/415V. Transformer at WRP Selator.
4. Proposal work for electrical portion of all Projects

July 2001 to September 2002
Organization: FENNER INDIA LIMITED
Designation: Dy. Manager (Electrical)
Major Responsibilities and Assignments
1. P&ID for Nalco Angul Project
2. Earthing Layout for Nalco Angul project
3. Eqpt. Layout for Nalco Angul project
4. Lighting Layout for Nalco Angul project
5. Cable routing Layout for Nalco Angul project
6. Tendering and estimation of TPS Paricha project CHP
7. Co-ordination of all running projects from electrical side.
8. Complete Electrical design and commissioning of Malco Salem project.

May 2000 to June 2001
Organization: HYUNDAI ENGG & CONST. LTD.
Designation: Astt. Manager (Electrical)

Major Responsibilities and Assignments
1.Commissioned 12 new GIS substations,1 EXT.GIS substation.
2.Tested Alstom, Siemens and Reyrole Numerical relays through Freja Kit
3. Errected tested and commissioned 25 No.s 33/11 KV transformer of 25 MVA.

May 1999 to May 2000
Organization: FENNER INDIA LIMITED
Designation: Dy. Manager (Electrical)

Major Responsibilities and Assignments
1. All the designing required for Neyvelli Lignite Corporation 400 Million job has been done by me for TPS-1 expansion Conveyors including 6.6KV/415V substation and PLC

2. Project of Coal Handling Plant (CHP) at TCPL at GHUMDIPOONDI through PLC successfully completed.
3. Project of CHP at NALCO Damanjowdi through control desk has been designed by me and execution in process..
4. Project of 17X conveyor at Neyvelli Lignite Corporation. TPS-2 modification has been designed and successfully completed by me.
5. Project of conveyors at Gem Sugar has been designed by me.

September 1995 TO April 1999
Organization: IRCON INTERNATIONAL LIMITED
Designation: Assistant Project Manager

Major Responsibilities and Assignments
1. Assuring QA / QC of complete electrification of UP Petrochemical Complex at PATA
2. Relay testing and scheme checking of all the panels in. GCU / GPU and OFFSITES & UTILITIES.
3. Commissioning of all the HT and LT motors & MOV 's in GCU / GPU and OFFSITES & UTILITIES.
4. Planning and execution of our UP Petrochemical contracts using various. software.
5. Erection and commissioning of 1 MVA DG set.
6. Circuit Wiring of all Hazardous & Non Hazardous areas.
7. Cable laying of HT & LT Cables of 91 Kms.
8. Platform Pole mounting & Street Light Pole erection
9. Flood Light mast erection and commissioning.
10. Battery charging up to 600Ah & Battery charger erection & commissioning.
11. Tender evaluation & laying specifications for floating contracts.
12. Computerized billing & budgeting of our contract.
13. Coordinating & corresponding with the Client & the Consultant.
14. Erection and testing of 220 KV SF6 CB, isolator and earth arrestors in the switchyard.

September 1993 to September 1995
Organization: NEW DELHI TRADERS
Designation: Project Engineer
Major Responsibilities and Assignments

1. Repair of transformers of 33 KV to 415 V of all makes.
3. Installation, testing and commissioning of 33 / 11 KV substation.

September 1990 to September 1993
Organization: RANKA CABLES INDIA LTD.
Designation: Maintenance Engineer
Major Responsibilities and Assignments

1. Maintenance of 33 / 11 KV substations.
2. Maintenance of wire drawing machine.
3. General maintenance of the complete plant.
4.Preparing schedule of maintenance & arranging shut down

April 1983 to June 1986
Organization: NATIONAL ELECTRICAL EQUIPMENT
Designation: Supervisor
Major Responsibilities and Assignments
1. Execution of sales of LT panels.
2.Procurement of LT equipments for LT Panels.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 3092)

Go to Search Parameters...

Brief Description

MSc. Civil Engineer, major: Land Surveying; 19 years experience of cadastral (legal) and public utilities and road surveying and topographical mapping

Conducting different jobs related training, Conducting Safety Tool Box training, preparing risk assessment and method statements for critical and high risk activities. Inspection of Rigging and Lifting tool and monitoring for safe rigging operations. Giving basic training to employees on fire fighti

Graduated in 2000 with a BSc in Architecture. Since then, I have been involved in the supervision of site works and the execution of architectural finishes in addition to the review of shop drawings for major mixed-use developments and tourist resorts in Egypt.

Scaffolding coordinator-supervisor and Safety manager

Three year full time diplome in Mechanical Engineering and have six year experience in Repair and Maintenance of heavy earth moving equipments

35 YEARS ELECTRICAL ENGINEER/HV/PLC

Inspection of Welding/Painting/Piping/Pipeline Activities

Bachelor of Engineering with over 27 years experience in Process Automation & Control industry.

Computer Knowledge: ArcGIS, MapInfo, Encom-Discover, Plaxis2D, Plaxis 3D foundation, 3D Tunnel, CESAR-LCPC, C-Tunnel, and Geo5 softwares. Qualifications: M. Tech ¡V Rock Engineering & U/g Structures i.e., Geotechnical Engineer, Civil, IIT Delhi

OSHA certified EHS Engineer with 3.5yrs experience

Professional Engineer with extensive international experience in chemical/environmental engineering and Construction Management. Very proficient in Project Mangement tools. Doctorate degree in Chemeical Engineering and pursuing PMP certification.

I ama Graduate Quantity Surveyor currently working in Dubai asa Project Quantity surveyor

Piping & pipeline constructions

Mechanical Engineer with more than fifteen (15) years of combined experience in engineering in various industries, which includes plant operations in various industries, which includes offshore and onshore oil & gas design, petrochemical, chemical manufacture, gas processing, and other industries.

I offer a Civil Engineering background specialized in Soil Mechanics and Foundation Engineering with a total of four years of working in various projects in India.

Skills: Critical thinking, active listening, negotiation, persuasion. Qualifications: Product /Proyect /Marketing Manager

Civil/Structural Designer with over 12 years professional experience

ECT in Electronic Engineering with 11 years experience in the Electrical Industry. Experienced and trained on LM2500, LM6000, TM2500s, GE frames T1/T3; PBX; GPS; Digital Switches; Nortel DMS 250/500 certified; Allen Bradley, Siemens, Fanuc, MarkV ,MarkVI,Woodward and Bachmann PLCs; COAX cable test a

civil draughtsman with 1yr and 8 mths exp. well experienced in structural steel, fabrication drg, r.c.c drg, architectural drg, working with german eng.. company uhde india pvt ltd as a sub contracter mumbai no.1 construction co, having round abt 100 branches world wide

I have the experience of complete Electrification of UP Petrochemical Plant and commissioned various Coal Handling Plant in various projects in Fenner India Ltd. I was working in Hyundai engineering and construction company ltd, Korea as Astt. Manager(Electrical) in Abu Dhabi for 19no. 33/11 KV

Construction Engineer, Commissioning Engineer, Instrumentation Designer, Field Engineer, Construction Coordinator, Lead I/E Designer, Instrumentation Design Supervisor, Instrument Engineer, Project Engineer, Pipeline Block Valve Engineer - these are some of my more recent job titles.

I have an N4 qualification in civil engineering, passed two courses in N5, registered two courses in N5, experience in building, road construction, and riggeriing.

I have over 3 years experience in drafting and I am well versed in structural and architectural design. I have considerable experience coordinating and executing projects with engineers and contractors and have a thorough knowledge of drafting processes and procedures. I work well with people and en

AutoCAD, Architectural, Instrumentation Drafting, Civil Drafting, Pipe Drafting, CadWorx

Nuclear Operations Supervisor. Supervised operations ensuring safety of personnel and equipment. Supervised maintenance operations on I&C equipment.

Experience includes Cost Engineering, Electrical/Instrumentation Estimating, Construction Electrical Engineering and proprietary software support. Duties include reporting of various kinds, forecasting, change management, staffing plans, cash flows and more.

Project Management/Engineering/Construction, with over 25 years of professional experience in EPC projects, in Management, Engineering and Construction in oil and gas field, infrastructures, site development, roads, airstrips and buildings, Proven Project Management skills with post responsibility

qa/qc engineer (E&I),6years experienced

Please consider this letter as an application for employment within your company. I wish to apply for the position as HVAC ENGINEER /Design Drafter/Quantity surveyor that will give me an opportunity for growth and career challenges particularly in the areas of design engineering and technical drafti

Land Surveying, Setting Out, GIS, Cadastral, Photogrammetry, Remote Sensing, CAD

HSE Officer with a background of over 19 years in handling safety, Health and Environment in large multi international Oil & Gas, Chemical and Construction Companies (industrial, power plant, petrochemical, marine facilities and heavy fabrication).

Estimation, Quantity survey, planning, design

Level II certificate in PT,RT,MT and UT..Confident to take up any job in oil field industry.Good knowledge in drawings,construction materials,welding standard,piping,test pack completion etc..

Ability to learn new Languages, Technologies quickly Strong Knowledge in Civil Engineering Subjects Proficiency in Software Packages like Auto Cad, Auto Lisp, Staad-III Good Practical Knowledge in Civil Constructions „h Ability to learn new Languages, Technologies quickly

I am interested in a position within your company’s electrical installation or electrical service Departments.

7 years of experience in the field of design, development, analysis. Design and modeling of Special Purpose Machine, Machine tools & accessories, Dies, Cams, jigs and fixtures etc.

I am looking for a position of Field Engineer, Office Engineer or Quantity Surveyor. I worked with the JBC for a little over a year. I am a very hard worker. I am very proficient at reading spec books and engineering drawings.

Civil Construction Engineer, Construction Superintendent Lead Civil Engineer

I am Civil Engineer having 9 years experiance in marine works. construction of breakwater, Quawalls installation, boat ramps, shore protection, reclamation and dredging with multinational construction company and consultants. presently working with reputed consutlant in maritime field.

Over 20 years of Electronic, Electrical and Mechanical experience. 10 years of Field Service in both domestic and international travel.

I am lead piping engineer ,supervised 6 engineer ,6 autocad drafter and 7 PDMS staff.I am familiar with all international stds related to oil&gas ,petroleum and power plant.

HSE Manager in major energy, power generation, oil and gas sectors covering technical and commercial requirements. With professional experience in directing and mananing health, safety and the environment protection & sustainability development aspects as per OSHA framwork and guidelines. Strong abi

18 Years including 10 years in oil & Gas - Construction experienced Safety Specialist , having Mechanical engineering Degree from Bangalore University and Diploma in Industrial Safety From RLI Chennai, India & OSHA 30 Hours Trained - Key skills : Construction Safety Mangement, Auditing, Trainer

Educational Qualifications: Master of Engineering in Mechanical Engineering specializing in Welding Engineering from Indian Institute of Technology, Roorkee, Uttar Pradesh, India in April 1996 with 74.40%, American Welding Society (AWS) Certified Welding Inspector (CWI) -AWS-CWI Certificate

Planning, Scheduling, Project Controls, Cost Tracking, Site Management, Construction Management

3 yrs diploma in mechanical engineering with 1st class from bset, bhubaneswer (india) in April-2002 professional qualification: -• cswip 3.1 (twi) certification for welding inspector, cert. no- 36291 •surface preparations & paint application techniques (certification from jotun paint school)

Senior Primavera 6.2 Planner / Scheduler or Management Skills

Experience as Piping Designer, in performing Pipe Modeling, Piping Arrangement Drawings, Checking & Extraction of Isometrics from 3D Model. ƒá Hands on Experience in Piping Software¡¦s ¡V Bentley¡¦s PlantSpace Design series, Microstation, PDMS & TRIBON M3. Knowledge of Piping Stress Analysis.

I have done degree in mechanical engineering. I am having AWS-CWI certification. And I am also having approval of Saudi Aramco as a Welding Inspector. I have also done ASNT level-II in UT, MT, RT, and PT. I am having more than 5 years and 8 months experience in oil and gas field.

Highly skilled graduate Project Manager/Civil Engineer and Project Controls Lead with more than 25 years related domestic and international experience in project and construction management.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out