Resume - 10 years working experience in the field of QA/QC Inspection, Project Managemen...

Misco Jobs

Resume #2784

CONTACT INFORMATION:
View contact information...

Date of Birth: 23rd November 1972.

Citizenship: Malaysian

Race: Indian

Academic Qualification: 2001-2002
Bachelor of Science in Construction Management from Greenwich University, Australia under a program by Shermont Graduate Studies Sdn. Bhd.

1991 - 1994
Diploma in Mechanical Engineering from Federal Institute of Technology, Malaysia.

Oct 2002 - Present (expected to complete by MAY 2003)
Pursuing Project Management Professional Certification Program, a program under Project Management Institute, which is currently being organized and conducted by Business and Advanced Technology Center (BATC), University Technology Malaysia.

Training & Seminar
Attended:

March 2003
Understanding, Documenting & Implementation ISO 9001:2000 QMS, organized by NEVILLE CLARKE (M) SDN BHD - JOHOR BAHRU

January 2003
PRIMAVERA #601 Planning & Scheduling with Primavera Project Planner, conducted by HSS INTESYS SDN BHD.

August 2002
Welding Inspector Steel Course - CSWIP 3.1 conducted by TWI Training & Certification (SEA) Sdn. Bhd., Sg. Buluh, Selangor D. E., Malaysia. (C. N.-02/WIS5KL/427)

September 1995
Basic Personal Survival At Sea (OTS/03) & Offshore Safety Orientation (OTS/01) conducted by Overseas Technical Service (M) Sdn Bhd in Collaboration with Esso Production Malaysia Inc.

CCTV, MATV and Intercom Installation at AVT (Audio Video Technology)

Computer Aided Design (Auto CAD) at Budi Gauge and Tools Sdn. Bhd.

Language Proficiency: Able to communicate spoken and write fluently in, i. ) English ii. ) Bahasa Malaysia iii.) Tamil

Computer Literacy: MS Word/Excel/Access 2000, MS Windows 98/& MS Project 98.

Additional Information: Capable of producing Installation Procedure, Rectification Method Statement or Repair Procedure, Inspection & Test Plan, Inspection Report Formats. And also familiar with most Construction Codes and Standards such as:-
* ISO9001:2000 QMS
* ASME SECT VIII DIV. I & II.
* ASME SECT IX.ASME B31.1
* ANSI/ASME B31.3
* API 1104 & 650
* AWS D1.1

Oct. ¡¦01- Present
1st Silicon Wafer Fabrication Plant
(Defect Reliability, Warranty & Final Close Out)
Employer: M+W Zander (M) Sdn Bhd
Client: SEDC/1st Silicon Sdn Bhd., Kuching, Sarawak.
Defect Coordinator (Closeout & Hand-Over)

Nov.¡¦99 - Sep. ¡¦01
1st Silicon Wafer Fabrication Plant
Employer: M+W Zander (M) Sdn. Bhd.
Client: Turner & Townsend (M) Sdn Bhd project PMC & SEDC/1st Silicon Sdn Bhd. Kuching, Sarawak.
Field Engineer cum Coordinator (Mechanical System)

Dec. ¡¦98 - Nov.¡¦99
BASF Petronas Chemical Acrylics Complex
Employer: Bechtel Shapadu Consortium
Client: BASF Petronas Chemical, Gebeng, Kuantan, Pahang, Malaysia.
QA/QC Mechanical Inspector / Supervisor

Aug.¡¦98 - Nov.¡¦98
MNI Pulp & Paper Recycling Plant
Employer: Malaysian Newsprint Industries (M) Sdn Bhd.
Client: Hong Leong Berhad. Temerloh Insdustries Park, Pahang, Malaysia
Mechanical & Electrical Supervisor cum Coordinator

Jul.¡¦97 - Aug.¡¦98
Malaysia Newsprint Industries Pulp & Paper Recycling Plant.
Employer: Stork Comprimo (M) Sdn. Bhd.
Client: Malaysian Newsprint Industries/Flasher challenge, New Zealand
Mechanical & Instrument Supervisor

Feb. ¡¦96 - Jun.¡¦97
KLCC Suria Retail Podium Project.
Employer: HENZ Construction Sdn. Bhd.
Client: KLCC Berhad.
QA/QC Supervisor (Mechanical System)

May.¡¦95 - Jan.¡¦96
The Mines Resort City Waterfront Business Park Project.
Employer: Strategic Alliance Construction Sdn. Bhd.
Client: Country Height Berhad
M & E Supervisor / Coordinator

Aug.¡¦94- Mac.¡¦95
Venice Hill Condominium Project.
Employer: Kim Hup Seng Construction Sdn. Bhd.
M & E SupervisorJob Responsibilities (per discipline)

Oct. 2001 - Present:Defects Coordinator (Closeout & Hand-Over)

„« During the Plant Defects Liability & Warranty Period, I was assigned as a Defects Coordinator to closeout all outstanding issue for the final hand-over and closeout of the project and report to commercial Director.

Scope of Responsibilities

* To closeout Punch-list, Defect Notification (DN), Design DN, Latent DN, Recurring DN and Non Conformance Reports (NCR).
* To Review Contract Documentation, Project Procedure and Tender Specification before engaging specific contractor carryout rectification work.
* To maintain and update a log of Defect and Non Conformance Reports (NCR) closeout for meeting updates, Retention Claims (5%) and back-charges
* Liaising with other QA/QC personal on the project, including the Client's QA/QC representatives or Project Management Consultant (PMC)
* To recommend solutions, provide technical support and method statement/Procedure for client approval before implementation of work.
* To provide close monitor on contractor's performing rectification and implement a strong QC requirement on all activity's to prevent reoccurring defect.
* To monitor and conduct internal Quality Audits to gather all documentation for final hand-over activity.

Nov. 1999 - Sep. 2001:Field Engineer cum Coordinator (Mechanical System)

„« Supervising and coordinating the installation of the Mechanical System which comprise of: -
* Rotating & Static Equipment, HVAC System (Chiller Piping, Ducting, Air Handling Unit (AHU) & Make-up Air Unit (MAU) & Control¡¦s), Process Water System (Piping, Storage Tanks (API650) & Booster Tank (ASME VIII Div.1&2)), Process Vacuum System, Process Mechanical System & Sewer Treatment System.

Scope of Responsibilities

* Reporting and updating the Construction Manager and QA Manager on daily activities of construction and site inspection activities.
* To develop and implement a Site Quality Control and Inspection Test Plan based on company requirements for the main activities.
* To records all activity progress and update the Construction Manager and Planner/Scheduler for claim's approval and progress during Construction.
* Monitor Implementation of Project Quality Plan, Project Procedures and conduct internal and external Quality Audits as directed by QA Manager and recommend corrective actions on deficiencies found.
* Coordinate and attending to all related inspection and testing with both client and sub-contractors such as welding procedure qualification test (WPQT), welder qualification test (WQT), Non Destructive Testing & film interpretation to API650 RT, pneumatic & hydro test, equipment installation & alignment, system punch-listing, system commissioning & start-up & etc.
* Monitor and inspection of Painting & Blasting process (WFT, DFT), Dolly test (pull-out test) and blasting to SA2.5 and SA2.0

„« During Wafer Equipment hook-up activities, was in-charge of supervising and coordinating QA/QC implementation, which comprised of Process Vacuum, Process Cooling Water, Process Drain, General, Solvent and Acid-Acoustic Exhaust System.

Scope of Responsibilities
* Responsible to maintain log on daily QA/QC inspection and installation progress.
* Monitor implementation of Field QC Plans on daily activities of Sub-contractors and documentation during work progress.
* Interfacing directly with Client Representative (Project PMC T&T) and Client Engineers (1st Silicon) on all inspection and technical inquiry on final hand-over for tool energization

Dec 1998 - Nov 1999:QA & QC Mechanical Inspector cum Supervisor

„« Monitor Implementation of Project Quality Plan, Project QA/QC Procedures and supervising the installation of the Mechanical System which comprise of: -
* Rotating Equipment (Nuovo Pignone Centrifugal Compressor (Gas Turbine), hydraulic lube oil & Pumps), Column, Pressure Vessels, Heat Exchanger and Water Tiub Boiler and steam turbine installation. (oschatz)

Scope of Responsibilities

* Responsible for implementation of project quality plan, site quality control and conduct daily inspection on Mechanical Equipment Installation inspection such as: -
* Level Check, Horizontality and Verticality Check, Pump/Equipment Alignment Check, Vessel and Column Internal Inspection.
* Performing inspections of all mechanical work in progress on continuing basis, witnesses tests and completes final P&ID check prior to turnover to client.
* Determining priorities for mechanical installation through consultation with superintendent.
* Assisting the Field Procurement Supervisor in inspection and receipt of mechanical equipment and setting-up at job site for storage, protection and preservation before installation. (weekly inspection basis)
* Assisting the Mechanical Superintendents and Field Engineering Manager in solving mechanical problems went needed.
* Supervising and Inspecting of Visual & fit-up inspection, Post Weld Heat Treatment (PWHT), Magnetic Particle Inspection (MPI) and Penetrant Test (PT) for Boiler Piping and Gas Turbine as per project QA/QC requirement.
* Verifying installation quantities reported by the subcontractors.
* Providing technical assistance and secure necessary Vendors¡¦ services for the final check out, turnover and commissioning of the plant. Assisting in securing the Client acceptance of documentation handover for record.
* In charge of 1st Mechanical Completion (1st MC) prior to hand-over, liaising with all parties such as E&I, Mechanical, Piping, Painting, and insulation supervisory team to solve all punch list issue and turn to commissioning team.

Aug. 1998 - Nov. 1998:M&E Supervisor cum Coordinator

„« Directly hired by MNI for the duration of three months to assisting MNI in finalizing all activities related to fire fighting and telecommunication system prior to final inspection.

Scope of Responsibilities

* Supervising and Coordinating with Authority Engineer, Sub-contractor & liaise with Local Authority (e.g. Jabatan Telekom & Jabatan Bomba) in getting the Permit To Operate (PTO) & final hand-over to MNI.
* Liaise with contractors on final touch-up work prior to Local Authority inspection and prepare all necessary documentation e.g. As Build drawings and approved drawing by Bomba, Inspection and Testing Reports.
* Monitoring and clearing all outstanding punch list and Non Conformance Reports (NCR)
* Develop and implement a site quality control and inspection plan prior to final hand-over.

Jul. 1997 - Aug. 1998:Mechanical & Instrument Supervisor

„« Undertaking the duty of Engineering, Supervising, Quality Control and Coordinating work for:-
* Mill wide underground piping, aboveground piping, steel structure pipe rack (AWS D1.1) and mechanical installation (pumps, pump room & water intake), process piping, fire-fighting system. HVAC system, telecommunication system and security system.

Scope of Responsibilities

„« MECHANICAL SERVICES
* Underground / above ground piping for mill wide fire hydrant system, cool water, process piping, pump room set-up, rotating equipment installation, chiller plant room piping, fire fighting system and to prepare ITP, and inspection forms prior to final inspection.
* Supervising and coordinating of NDT, RT, MP, PT for stainless steel and steel pipe work. Filling/documenting all related inspection and reports any finding to QA/QC Manager.

„« INSTRUCMENT CLEAN & DRY AIR SERVICES
* Compressed air pipe line for plant wide.
* Installation of dryer, dehumidifier, distribution manifold & actuator for mechanical operated damper and pneumatic operated system.
* Supervise the final testing & commissioning of the system with supplier and vendor.

„« PA, TELECOMMUNICATION AND SECURITY SYSTEM
* Mill wide PA system, Plant wide telephone system, Main Distribution Frame Room (Set up)
* PABX (Private Automatic Branch Exchange System), CCTV installation, stroke light installation and IT network cabling installation

Feb. 1996 -Jun. 1997:QA/ QC Supervisor (Mechanical System)

„« Responsible to ensure all work are done according to KLCC QA/QC Requirement and to ISO9000 standard by coordinate & attending to all inspection and testing with both client and sub-contractors such as hydro test, equipment installation & alignment, system start-up & etc.
* In-charge of all Mechanical system installation for building services system as mentioned below:-

„« Mechanical Services
* Pump room set-up & chiller installation.
* Pipe work installation Welding Fit-up & Visual Inspection and Radiographic Testing.
* Blasting & painting for piping work.
* Pump installation, alignment & grouting
* Inspection & documentation
* Testing & commissioning
* Line check & punch list

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 3118)

Go to Search Parameters...

Brief Description

EXPERIENCE IN INTERNATIONAL TENDERING OF POWER TRANSMISSION PROJECTS

10 years working experience in the field of QA/QC Inspection, Project Management, Field Engineering, Construction, Fabrication, Maintenance and Preservation of High-rise Buildings, Paper Recycling Plant, Oil & Gas Petrochemical Plant to Semiconductor/Wafer Technology Plant.

Control and instrumentation engineer with good experience in project management ,construction, commissioning in power plants and chemical industries.

International Land Surveyor with over 30 years of experience including: GPS, CAD, exploration, mapping, military support, oil infrastructure, and various civil related projects.

Geological Work - Prospecting, Exploratory mining pit, Estimation of Reserve, Sampling

Having good presentation and training evaluation skils. felid experience as safety advisor in Oil & Gas offshore construction industry based in Dubai.UAE. Having engineering functional background . Can independently handle the safety and training activities. Specialised in NVQ competemcy assessment

Skills Summary : • Installation of Windows & Split Air-conditioning Units; Servicing, Preventive & proactive maintenance of AC & refrigerators. • Welding of copper pipe joints & fixtures. • Checking Voltage & Amperes of Cooling Units using Clamp-Meter. • Gas charging of all cooling units. Cooling U

Responsible for Civil / Structural works of assigned Projects for both Oil & Gas Industry and Commercial/Residential or Mixed Used Projects.

Project manager

Civil engineering experience. Highly qualified in troubleshooting and problem solving skills in the field of construction and management

17 years experienced engineer

More than 22 years (16 years in India and 6 years in Saudi Arabia) in Electrical Power/Substation/ Managerial/ Electro-Mechanical /Petrochemical/ Geographical Information System (GIS), fields.

In Geotechnics I ensured the supervision, the control and the establishment of design reports for several geotechnical investigations of large civil structures in soft and hard grounds : special foundations, retaining structures, soil improvement and reinforcement by geosynthetics' products,

I have 29 years of management and engineering experience. Excellent references available.

CAD and IT Administration and Development

Geotechnical skills , transportation skills, autocad and any other thing that a fresh civil engineer is expected to be knowing .

Computer skills are MS Word, Microsoft excel, MS Power point, GIS, AutoCAD 2002, 2004, 2006, NMax v6.50, Windows Movie Maker, 3D Home architect, Photo Studio 2000, & Cyberlink Power Director. I can also oper8 instruments such as Nikon DTM-332 Series Total Stn., GPS( Sokkia, Leica, Epoch 10, Etrex)

position as an MEP Design management, Sustainable Design, LEED Facilitation, Building Commissioning, and Building Energy Modeling for High Performance Buildings.

30 years experience in civil and horizontal projects

all types of welding, vessel, tanks, erection and fabrication, piping and structure, all solutuions of welding requirements,

Havin total 30 yrs experience out of which 20 yrs in all types of cranes-and 6 yrs in Bulk material handling field like stackers/Reclaimers etc.

Detail-focused and culturally-sensitive professional offering more than 20 years of increasingly-responsible experience. Track record of completing complex projects on time and under strict budgetary guidelines without sacrifice to overall project quality

Civil Structural Design Engineer with over 6 years of experience in the field of Design, Finite Element Analysis, Stress Analysis. Currently working on fast track multimillion dollar, complicate & intricate International construction projects in a contracting company in Dubai, U.A.E.

Senior Marine Facilities Engineer, Highest qualification: B.Sc (Eng) Civil, University of Cape Town, 1989, Overall working experience 16years, specializing in Marine Terminals, Harbor and Coastal Structures, Oil & Gas Development and Port Infrastructure Projects.

QS/Cost Engineer with 10 years of Experience in Construction Industry

PMP Certified Civil Engineer with MBA(Marketing & Systems) with about 7 years experience in the Middle east

Interior designer-Architectural presentation artist

Highway Design, Pavement Design, Economic and Financial Analysis

I am well qualified engineer, have strong administrative abilities, and also possess sound background as Quality Control Consultant. I would like to work with a company that provides strong career building opportunities as well as helps to enhance my engineering/administrative abilities.

Having Gulf experience and 10 years long employment in contract preparation & negotiation, tendering & award procedures. Conversant with FIDIC and INCOTERMS.An certified ISO Internal Auditor.

I am currently seeking a challenging position within the architecture and engineering fields as an assistant project manager or drafter. I have gained a wealth of experience with my current employer in the design of telecommunication sites as well as a fundamental knowledge of civil site design.

PhD, CFD, Fortran, Matlab, C++, Fluent, Gambit, Tecplot, AutoCAD, ArcGIS

I am presently working as Manager - Operations (Process) with IndianOil Petronas for their 6.0 lakh TPA LPG Import/Export Terminal at Haldia, India. I have over 20 years of experience in the construction, commissioning & operations of LPG Filling Plants & Cryogenic LPG Terminals.

CA licensed geologist (CEG&RG). More than 24 years of professional experience in engineering geology and environmental consulting in CA & HI, including 16 years as supervisor/owner. Currently self-employed with own environmental consulting firm in HI since 1992. Relocating to AZ (Tucson or Phoenix)

Post graduation in tool desiogn esp. in the field of sheel metal working ie. press tools, plastic moulding, have tge good knowledge of catia-v5, pro-e, autocad, ansys software

BE Civil

COMPUTER LITERATE, EXCELLENT DECISION MAKING SKILL, FINAL YEAR BSc OSHE

Experienced in autocad ,microstation and manual drafting. 32 years in civil and structural design

PIPING DESIGNER/DRAFTSMAN(PDS/PELICONFORGE/SPR/CAD/MICRSTATION)

MSc of Engineering Science, East Ukrainian University – Ukraine (1998),  BSc Instrument & Control Engineering, East Ukrainian University – Ukraine (1997)

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Search for job in car or food industry.

Searching for a position within the Construction & Civil/Structural Engineering profession, in a progressive employer that provides career growth and excellent advancement opportunities.

I’m a Computer Aided Drafter/Designer with 15 yrs experience in various fields. I use AutoCAD up to version 2002, IDEAs SDRC v. 7-9. I’ve worked some with MicroStation and AutoDesk Inventor. I am looking to relocate to Virginia or Pennsylvania Reading area.

I want to relocate to USA/UK/CAnada,hence need an employer who can hire me and sponsor me for visa.

I have a total of nearly 13 years experience drafting, with about 9 of those years in the home building business. I also have 5 years in Coil Production (AC, Steam, Condenser, & Air Handlers) I have developed custom designs for previous companies specifically tailored to the customers needs. I have

I have diploma in Surveying and 4 years exp in High rising Bulidings. I can operate all kind of Survey instruments

Mechanical Engineer - 20+ years maintenance experience in mining - both Underground & O/Cut. Also Processing Plant maintenance & Project Management on new Greenfields plants.

Piping detail, scheduling, field work and design in refineries, chem plants offshore prouction platforms, onshore and offshore oil drilling rigs sugar mills using acad,( short term cadworx,rebis, smartplant) and on the board

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out