Resume - First class marine engineer

Misco Jobs

Resume #27926

CONTACT INFORMATION:
View contact information...

OBJECTIVES:
To achieve a more dynamic and constructive career.

LANGUAGE STATUS:
Farsi: Native English: Fluent in written & Spoken

PRESENT OCCUPATION:
Capacity: Technical Marine Surveyor

Employed by: Det Norske Veritas (a classification society) for more information kindly refer to: www.dnv.com.

Description of Activities:

- Technical Inspection and Certification of Merchant Ships, in mechanical, constructional, safety and environmental aspects.
- Technical Inspection of Marine industries, in relation with certification of welders steel manufacturer's marine equipments manufacturers.
- Country HSE coordinator: In charge of health, Safety and Environment, planning and Implementation.

Duration of employment: September, 2002 until present. (Three years)
5. Former occupation:
Capacity: Marine Chief Engineer

Employer: Islamic Republic of Iran Shipping Lines for more information kindly refer to: www.IRISL.ir

Description of activities:
Technical Management of Ocean going Merchant Fleet
- Direct responsible of implementation PMS by ship stuff.
- Direct responsible of up keeping International safety management
- Receiving report from 2nd engineer.
- Instruction and evaluation of 2nd engineer and his subsidiaries.
- Fully in charge of operation and maintenance of all machineries and deck equipments, which includes
- Main engines, Different types and sizes of Super charged, reversible, Two stroke double act Engines with long travel of push rods equipped with cross heads, Power Range: up to 20,000 HP
- Diesel generators: 3 or 4 Nos of Medium, High Speed four stroke single acting diesels engines coupled to Alternators Power Range: Up to 1200 KVA.
- Steam Generation: Saturated steam Boiler up to 7 kg/Cm2 pressure, including Exhaust boiler (Economizer). With all safety interlocks, protection system. And automation.
- Electrical installations, Power installation, power main & Emergency distribution networks, and switch boards, Automatic switch on of electrical circuits interlocks and protection systems, automatic start up of generator, synchronization, Parallel operation of generators Instrumentations for monitoring Protection and automation e.g. AVR.
- Automatic Control and Instrumentation, in both electrical and pneumatic systems. Norcontrol, Siemens brands, for local and remote control of machineries, monitoring and adjustments. Hydraulic power packs to convert the signals into power, e.g. in steering and CPP systems.
- Air conditioning installations, Operation and maintenance based on PMS and condition monitoring. in different kind of air condition units Compressors, condenser, Air handling units in single duct and double duct systems automation in control of humidity and temperature.
- Miscellaneous machineries: refrigerating installations, various types of Pumps hydrodynamic or positive displacement type,(centrifugal, Piston, screw gear types), air compressors and H.P. vessels, fuel and L.O. system: handling system consisting of bunkering, transferring, purification and heating up,

- Duration of employment: September, 1990 – September 2002 (12 years)

EDUCATIONAL STATUS:

Academic: B.sc. in marine engineering graduated from Nikbakht Sistan and Baluchestan technical college (1985-1990)

Professional:
1. Second Class Marine Engineering competency, 1992-02~1992-11
2. First Aid Course and Basic Medical care Knowledge.
3. Elementary Fire fighting course in NIOC Training dep. Mahmood Abad- Iran(1993-02)
4. First class marine engineer competency, graduated from IRISL training institute. (1998-1999).

5. Advanced firefighting course provided by IRISL Training institute, in Iran Jahad training ship, Bandar Abbas anchorage- Iran (1999)

6. Basic knowledge for ships in operation Surveyors in DNV Training Center Høvik-Norway(2002-07)
7. Systematic knowledge for Ships in operation Surveyors in DNV Training Center Bombay- India(2003-04)
8. Health, Safety and Environment (HSE) Country Coordinators course DNV Training Center Høvik-Norway(2003-07)
9. ISM Auditors Course in DNV Training Center Høvik- Norway (2004-02)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 2856)

Go to Search Parameters...

Brief Description

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Mature Canadian seeking work on major civil projects. Available Immediately.

PROJECT CONTROL

Project Manager/Lead Technician/Fiber Splicer/Inspector

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

(1)Refinery experience: Atmospheric , Vaccum Distillation,SRG Section , Lpg , Visbreaker , Asphalt Blowing , Catalyst Reforming , Isomax ,hydrogen production - gasoil HDS - kerosine HDS- sour water stripper-H2s removal amine treating unit

Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.

A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings

I am intrested to work as senior planning engineer with a consultant, project management group or with a developer in Abu Dhabi, UAE

Primavera 3.1- P3E , P5 Planner / Scheduler

Seeking a position with an organization that allows me the opportunity to utilize my education, experience, skills, and talent to achieve and promote a common goal in a teamwork environment.

Construction Engineer in Oil and Gas Facilities

Resume 2003: Joseph W. Bisselle Location: AZ, USA. Objective: Engineering, Supervision, Maintenance or Managerial Position. Relocation and overseas positions are considered.

11 years of rich and diverse experience in Engineering and Construction industry covering wide spectrum of activities including Project controls, Construction Supervision, Quality control etc.,

electrical design/project engineer with 14 years of work

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

I have 30 years total conceptual design experience. I take project from conceptual phase through vendor quotes to final manufacturing layout details.

Career Summary Wide ranging experience in Oil/Gas Industry of participating and co-ordinating multi disciplined workforce engaged in all aspects of Oil/Gas construction management activities. Career progression from project engineer to project co-ordinater and commercial co-ordinator.

I am a fully qualified and experienced Project Mechanical / Piping Designer capable of handling a project from initial concept to final handover utilizing current software, design codes and procedures being used in the Pharmaceutical / Chemical Industry.

Summary of qualifications * Over thirty years of experience in design, engineering, and manufacturing of aerospace, military, marine, and commercial equipment with emphases on robotics and automation.

36 plus years as pipeline construction inspection/consultant.

Aerial and Underground Telecommunications Experience for over 20 years

Electrical Power Engineer (Project and Planning)

Working in Saudi Arabia I gained valuable practical experience, I also developed my project management, communication and organizational skills, essential attributes in order to lead in my field by building a solid technical and theoretical background.

6+ years Programming and Drawing experience in CAD with a broad understanding of Java, Visual Basic 6, Developer 6i, Java Servlet, Java Networking, Perl, C Language, Iappli, MIDlet CATIA,I-DEAS, UGS-NX, Inventor, AutoCAD 2007, Mechanical Desktop, Pro/E , J2ME, JSP,ODBC, SQL, Oracle, Postgre SQL, RDB

Estimator

Certified Project Management Professional (PMP), and very organized, articulate and detailed-oriented professional architect, with a strong educational background and more than twenty years of professional experience, a superior work ethic, developed skills and commitment to excellence.

have plenty of site experience .always worked with big organizations. well computer literate. worked on power station ,industrial and residential buildings

I am a diploma holder in mechanical engineering having 7 years experiance in metalic /non metalic piping both above and under ground

Mechanical Engineer - Inernational Purchasing - Project Management

A competent engineer with a broad range of skills and experience in civil and structural engineering works. Highly self motivated and capable of working under pressure. Seeking employment to broaden my skills and experience with a view to developing a career in construction management

Experience mostly in construction Company, Infrastructure Project, Power Plant, and Railway Project.

Piping Supervisor / Piping Area Team Leader / Sr. PDS Pipe Designer / PDS Instructor / Piping Field Engineer

First class marine engineer

Ø Seeking a challenging and responsible job as a Civil Engineering professional where I could utilise my diversified experience of 12 years in construction industry of multi-storeyed residential, commercial and Industrial projects Petro-chemical Refinery Oil and Gas Field etc.

Civil Engineer and Engineering Geologist (Experienced in Geotechnical Investigations and Designs)

Heavy equipment workshop or field manager supervisor seeking overseas position anywhere in either construction, tunnelling, or oilfields. Available immediately, short term or long. Prefers demanding position.

Iam a Mechanical Engineer with Technical sales experience in various industries . I am having good communication skills and flair for sales. I like challenging jobs with a target oriented approach. I am sincer, hardworking,and a honest guy. My hobbies include socialising ,travelling,reading

ACI, MCA, Density, Concrete, Agg.Certified

Welding inspector piping & structural

Structural & Misc Steel Detailers

I have passed MSc in Geology from Nepal and Professional Master Degree in Geological Engineering from the Netherlands in 2003. I have about 10 years work experience. My experience is especially on core drilling and tunnel excavation. A present, I have been looking for a job in Australia.

Knowledgeable in Procurement, Materials Management and Piping.

Mechanical Engineer(Diploma) Around 20 yrs experience of Erection, commissioning & Maintenance work at 4 different modern continuous process Cement Plants up to 10,000 TPD and LOESCHE Germany India office.

Planning Engineer Infrastructure ,Oil & Gas & 5 years

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out