Resume - I have a master degree from the American University in Cairo, excellent computer...

Misco Jobs

Resume #30521

CONTACT INFORMATION:
View contact information...

OBJECTIVE
A job opportunity in the construction industry, where my technical and professional skills could be employed and further enhanced.

EDUCATION
Master of Science, The American University in Cairo, Cairo, Egypt
Major: Engineering (with specialization in construction Engineering)
Fall 2004
Cumulative GPA: 3.677
Bachelor of Science, Zagazig University, Sharkeya State, Egypt, July 2000
Major: Civil Engineering
Overall Grade: Good

WORK EXPERIENCE
2005 Dar Al-Handasa, "Shair and Partners", Egypt
Working as Quality Engineer in the Quality Management Department
* Involved in auditing the project mangers and departmental engineers to check their compliance with Quality Procedures and Manuals
* Involved in monitoring and revising projects progresses with respect to audit schedules
* Involved in checking Project schedules versus baseline budget
* Assuring the Internal departmental checking prior to project deliverables submission to the clients
* Checking project deliverables (drawings, documents, and contracts)
* Assuring the usage of up-dated standards and codes of practices by departmental engineers

2004 The American University in Cairo, AUC, Cairo, Egypt
Employee, Research Assistant
- Employed as research assistant in Interdisciplinary Engineering Program I.E.P.
- Involved in assisting faculty members in writing technical papers, journal papers, conference papers, lab experiments, and finite element analysis

2004 The American University in Cairo, AUC, Cairo, Egypt
Employee, Laboratory Assistant
- Employed as laboratory assistant in Interdisciplinary Engineering Program I.E.P.
- Involved in assisting students in dealing with computers and programs.
- Involved in fixing computes' problems.

2004 The American University in Cairo, AUC, Cairo, Egypt
Employee, Teaching Assistant
- Employed as teaching assistant of the following courses:
1. Scheduling and planning
2. Introduction to the construction management
3. Methods of construction and equipment
4. Engineering drawing
5. AutoCAD
- Involved in assisting students in solving problems and explaining concepts of courses.
- Involved in assisting student in AutoCAD laboratories
- Involved in teaching students how to write a technical report and how to make a technical presentation
- Involved in grading the assignment and reports.

2003 The American University in Cairo, AUC, Cairo, Egypt
Employee, Teaching Assistant
2002, September The American University in Cairo, AUC, Cairo, Egypt
Employee, Teaching Assistant

2000 The Arab Contractors Company, Cairo, El-Shuruk City, Egypt
Trainee
- Trained as site-engineer in constructing villas sites
- Supervised on-site quality control testing of materials
- Supervised on-site quality control of construction methods especially finishing works (marble, Granite, plastering, floor tiling, insulation, painting,… )
- Involved in reading plot plans and project drawings of projects in progress
- Reviewed and compared design drawings with the work constructed on-site

1999 The Arab Contractors Company, 10th of Ramadan City, Egypt
Trainee
- Trained as a site-engineer in a elevated water tanks site
- Supervised on-site quality control testing of materials
- Supervised on-site quality control of construction methods especially concrete works related to this type of construction (slip forms, climbing forms, tank base and fixtures)
- Involved in reading plot plans and project drawings of projects in progress
- Reviewed and compared design drawings with the work constructed on-site

1998 The Arab Contractors Company, Badr City, Egypt
Trainee
- Trained as a technical office engineer in Badr City.
- Involved in writing and submitting monthly bases invoices
- Involved in reading plot plans and project drawings
- Involved in updating project schedules and tracing progress of the different activities

Career Related Projects
Master Thesis: Development of Ferrocement Panels to act as slab and wall bearing panels:
Completed a research study that included:
- Production of ferrocement panels both sandwich and cored panels.
- Testing the produced specimens under flexural and axial compression loadings.
- Development of theoretical model so as to validate using the proposed panels as an alternative to conventional concrete panels.
- Development of Finite Element Model to simulate the behavior of the produced specimens and to be used in future for parametric study whenever needed.
- Providing a complete report (thesis) that included all theoretical and experimental results compared with the finite element model results. The report also included the recommendation for future investigation.
Graduation Project (BSc): complete design of a stadium and an elevated water tankCompleted a research study that included:
* Providing complete analysis of the selected units using Sap 2000
* Providing complete design of all sections and members using quick basic
* Providing complete drawings of the two projects using AutoCAD
* Submitting a final report on the problems encountered during the project and how they were overcome.

SKILLS
Computer Skills: Microsoft Office, AutoCAD, Sap 2000, Primavera, MATLAB, ABAQUS (finite element package), Microsoft Project

LANGUAGES
Fluent in written and spoken English and Arabic
Good command of spoken and written French.
Awards Received 2004, July Awarded a conference grant from the American university in Cairo to present in a Conference in Singapore "Our World in Concrete and Structures" from 24th to 26th August, 2004
2004 Awarded for "Fellowship in American University in Cairo" to work as a research assistant in the Engineering Department.
2004 Awarded for "Fellowship in American University in Cairo in Master Degree in Construction Engineering"
2003 Awarded for "Fellowship in American University in Cairo in Master Degree in Construction Engineering"
2002 Awarded for "Fellowship in American University in Cairo in Master Degree in Construction Engineering"
Personal Data Date of Birth: July 15, 1978
Nationality: Egyptian
Marital Status: Single
Military Service: Fully exempted

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 3125)

Go to Search Parameters...

Brief Description

An Engineer + MBA from Mumbai University and having good experience in Construction Industry

Emad Toubar is currently employed by Saudi Consolidated Engineering, SA as a senior mechanical piping engineer, where he provides engineering design services for Saudi ARAMCO and other major petroleum companies in Saudi Arabia including design of piping systems and petroleum pipelines for new wells.

Highly motivated individual with strong FEA experience. As a stress analyst, I enjoy analysing the products that designers design, highlight potential problem areas and ultimately help product development by saving cost. My aim is to make product more durable and cost effetive.

Electrical & Instrument Designer

Structural Engineer +3 Years EXP.

HSE officer with 6yrs of exp. having Nebosh, Iosh, Osha etc.

Working as Senior Project Engineer in Ontario, Canada with a firm, which specializes in the design of municipal infrastructure, roads and water resource management.

Ability: proficient in window application

Senior Electrical Engineer

I have over 5years and 8 months of combined experience in computer programming and design of electronic appliance controls mainly for HVAC products. Presently I am working as an Electronics Engineer (HVAC Electronic Controls Design, Testing & Approval) in the R & D dept. of Awal Gulf Mft. Co.

This is a resume which will illustrate briefly what I have achieved both with educational and industrial environments.

Sr Structural Designer / PDS FrameWorks Coordinator and project set up.

Estimator, Project Manager, Project Engineer, Construction Administrator, Architectural Designer, CAD

instrument engineer with 6 yrs of experiencer in construction management,projects and commisioning in instrumentation field.

Primavera Scheduler

Facilities supervisor for utilities, electrical disturbution, ammonia refrigeration, power boilers and heat exchangers,production equipment, infrastructure, mechanical contractor for twenty years,

Radiation Safety Officer, Certified Health Physicist, Environmental Manager

Mechanical Engineer, 2 yrs of experience in design and development, cad packages- CATIA V5, solidworks 2006

For the post of Design and draughting

Six years of experience in Project Management, Contract Management, Quality Control and site supervision of high-rise residential and commercial project. About four year of experience in Project Management of an industrial projects.

Objective: To contribute my technical skills and to be part of professionally managed Organization that provides excellent opportunities for learning and scope for Individual development.

Architect and Environmental Planner Total Job Experience-2.5 yrs as an Architect 2 Months as a Planner

Bilingual engineer with experience in engineering and teaching. Experience in administration, group management. Dynamic and outgoing by nature.

MSc in Environmental Engineering from University of Nottingham, UK

I am piping engineer with diploma in mechanical engineering to Poli- Technic institute "GH.Asachi" Iasi, Romania

Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

Young academically accomplished geotechnical engineer, practical experience in the mining industry both domestic and overseas.

Application for the post of Safety officer

EXPERIENCED PIPING ENGINEER WITH PDS ADVANCED EXPERTISE / TECHNICAL DATA SPECIALIST

Make, Review and implement Engineering design, construction work,inter-diciplinary interfaces, Construction Specifications, Progress reports, Quality Plans and all the commssioning and Maintenance Procedures.

Knowledge of Hydrotreating & Hydrocracking, Catalytic Cracking, Distillation and Amine plants. Knowledge of Process simulation (HYSYS, ASPEN Plus, PRO II and HTRI), PFD, P&ID, Flare and Relief systems, LDT, Hydraulic calculation, HAZOP review, Equipment sizing, TBE, DPDT and process data sheet

QA/QC, CERTIFICATION, TURNOVER

Interior fitouts Project Manager - expertise in Site execution, Management, Planning , Procurement, Coordination between Services. A Go-Getter and Self-Motivated Engineering Professional.

I have a master degree from the American University in Cairo, excellent computer skills, English & French languages, Excellent communication skills, and presentable. I prefer workin in construction management field

I am a master electrician with 35 plus years in the management of large construction projects. I have over three years experience working in Iraq, working with many different cultures and in adverse conditions.

Develop & implement Contractor’s Quality Control Plan in accordance with contract & technical specifications including writing the Inspection & Test Plan, Quality Audits, Record Keeping, Prepatory Phase Meetings, Resolve NCR's, Process Control, Sub-Contractor Control, every aspect of Quality Control

Im certified coating inspector B-GAS grade2&SSPC-PCI

Senior Electrical, Energy Model, LEED, sustainable, Head, Manager, renewable, coordinator, building commercial, residential, healthcare, Education, industrial, parks, Hotels

Career Objective

Twenty five years experience in ten manufacturing sites with four integrated major and three independent oil companies. Responsibilities include Unit Operator through Refinery Manager, and span operations, maintenance and technical departments. Steady promotion and career growth.

Experienced Autocad drafter with 5 yrs. structural steel detailing experience seeking employment.

6+ years of software design and development experience with specialization in Client/Server programming, Object Oriented Analysis and Design. Proficient in, C/C++, MFC, Visual C++, Win32 API, COM/DCOM, multithreading.

Curtain Wall Civil Structural Engineer Manager

A structural engineer with experience in design, construction and inspection of buildings and bridges.

11 years of experience in Erection & Installation, Engineering, Design, Commissioning, Inspection and other Management activities in the field of Terminal Automation, Gas Metering, Refinery, Gathering Centers and others.

Engineer with practical business, design and management experience in the areas of Civil and Geotechnical Engineering. Educated professional, committed to continuous improvement, ethics, teamwork and quality service. Detail oriented, excellent communicator, and capable of managing multiple projects

16 years in Engineering, Procurement and Construction projects associated with cost control, planning and scheduling fields. Project categories includes petrochemical, gas and oil refining, power, and industrial, buildings, roads and a sports complex. Conversant with project cost control s

Willing to accept challenging career in telecom Development Equipment Environment with management and seeking for a position where I can utilize my technical skills and professional experience, to provide the best of mine for the success and growth of the organization and gain satisfaction thereof.

To obtain Position in Project Management or Project Engineering in an International Environment

SAP knowledge,Material engineer,controller.Thorough knowlege of Isometric drawing,fabrication,material manual,and inventory.oil and gas field,gulf and offshore experience.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out