Resume - i have 17 years experence in the field of instrumatation covering industries lik...

Misco Jobs

Resume #30577

CONTACT INFORMATION:
View contact information...

Post Applied for: Instrument Technician

EDUCATIONAL QUALIFICATION: Higher Secondary School Certificate
TECHNICAL QUALIFICATION: Diploma In Instrumentation

TOTAL EXPERIENCE: Seventeen Years

DETAILS OF EXPERIENCE AND COMPANIES
Presently working as Senior Instrument Technician -
Specttam in Hyderabad.Duties involved are
Maintenance of Boilers.

Employed as I&C Technician with
ABB sadelmi in Ruwais Refinery Expansion project
5/10/99 TO10/5/2001 of power plant, Boiler and desalination gas turbines
ABU DHABI (4N0)each maximum power output 157MW,waste
Heat RecoveryBoiler maximum distillate production
33 c and maximum distillate production 1800m/day.
Duties involved calibration of the instruments and
Loop checking commissioning and trouble shooting

Employed as Instrument Supervisor with Dubai
Worked in EPCO.Jebelai Port and off shore duties
11/7/19997 TO 31/12/97 involved shut down maintenance of well head flat
DUBAI from calibration of transmitters and loading arms
Testing pressure switches solenoid valves.

Employed as a Senior Instrument Technician th
M/S United Engineering Service worked in lfurat
25/12/1995 TO 28/8/1996 Petroleum Company in Syria. Duties involved rev-
SYRIA vent and corrective maintenance of process instr-
ment and E.S.D, P.S.D. testing and repair calibra-
tions all electronic and pneumatic Instrument plant and L.P.G.Loading calibration of all neumatic stations.

Employed as Instrument Supervisor with I.C.S.O
Under maintenance contract of ministry of electricity
14/5/1992 TO 30/4/1994 and water in Kuwait duties involved shut down mai-
KUWAIT tenance of various types of electronic pneumatic
Instruments plant boiler and turbine desalination.

Employed as a Senior Instrument Technician with
National Petroleum Construction Company
10/7/1991 TO 15/4/1992 Abu Dhabi, U.A.E. Duties involved offshore and
ABUDHABI onshore calibration of the transmitters of well head flat forms panels pressuretesting of impels lines from chrisms tea to instrument panel loop checking of panel to R.T.U to central control room and mainten-
ance repair of electronic and pneumatic instruments.

Employed as Instrument Foreman with M/S Kelogg
Kuwait Mina AL-Ahmadi Refinery maintenance of
16/9/1988 TO 18/7/1990 electronic and pneumatic instruments plant L.P.G
KUWAIT trains gas plant.

Employed as Instrument Technician with M/S.Epic
Worked in Mina Abdullah Refinery constructions.
25/3/1987 TO 16/7/1988 Duties involved creation and commissioning of DCS
KUWAIT Of Honey well T.D.C.3000 as well as conventional
Process instruments.
Employed as Instrument Technician with
M/S.Kent Kuwait Gas Plant in K.N.P.C
29/6/1984 TO 9/9/1985 Refinery L.P.G plant trains. Duties involved
KUWAIT preventive and corrective maintenance of
Electronic and pneumatic instruments.

Employed as Instrument Technician with
M/S.Volhro Ltd.,(Agro chemical plant).
8/11/1976 TO 10/5/1984 Duties involved calibration and repair of
INDIA process instruments preventive and corrective
Maintenance.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 3118)

Go to Search Parameters...

Brief Description

Fire Safety Engineer

Material Controller with 4 year experiance

i have 17 years experence in the field of instrumatation covering industries like refinrey petro chemical and power plant

As a Projects Management Professional with 12 years of diversified experience in GCC countries and India, I managed, coordinated and successfully completed prestigious EPIC contracts with multinational and state owned clients such as Qatar Petroleum, RasGas, Fluor, CB&I, Petroleum Development of Oma

Communications skills, Team player, Document Control, Information Management, Archivinng, Scanning & EDMS

I have a wide on and offshore range of experience in heavy equipment installation, commissioning and maintenance. Managing and supervising day-to-day preventive maintenance.

KEY SKILLS: Document Control, Data Control, Administration, Project status update, Web Designing & Programming in ASP.NET, VB.NET, Web Applications, and Access Programming.

Experiences as QA/QC inspector and Welding in the Inspection sector at various International & national Company. Employment within the Oil & Gas, Power Plant, Structural Steel, Pipe Mill, Floating Production Storage Offloading FPSO (Offshore), Platform Modification (Offshore), Refinery and Pressure

Engineering Analysis :CEASER - II (STATIC analysis),PDMS,Programming language ¡§C¡¨, AutoCAD, SolidWroks, Ansys, Primavera, Elite, Ms-Office, Excel, Word, Windows Xp, 95.

Quality Assurance, Quality Control, Inspector, Sr. Inspector, Sr. Surveyor, QA/QC Inspection Engineer– Supply / Construction, Quality Coordinator / Administrator, Procurement Quality Inspection Services Manager / Coordinator, Expeditor, Lead Mechanical Engineer.

I would like to work in IT department to give the company from what I gain experiance and knowledge

PDS, Micro Station, AutoCAD

Cost Controller - B.Sc. Degree in Commerce Accounting Branch

Planning/Scheduling Engineer - Specilization in Primavera P3- Having 10years of experience in Oil, Gas, Refinery, Power & ME sectors worked under different Prestigious organisations like PDO, BP, QP, ADNOC, Bechtel, Snamprogetti, Sumitomo Corporation, HHI, etc - 6Yrs. in Planning & 4Yrs in Site(E&I)

Post Graduate in Soil Mechanics and Foundation Engineering, professionally qualified Geotechnical Engineer having about TEN YEARS of work experience. Mr. Madan Kumar has comprehensive knowledge and vide experience of consulting services as a Geotechnical Engineer

I have wide experience in field of inspection for petroleum oil and gas project. With multi national companies using international standards and specification. I worked in middle east, Far East and Kazakstan. You can contect to any of company which I worked and confirm with them.

With more than 17th years of experience in performing design engineering and constructions on various facilities relating to Chemical Plant, Petrochemical Plant, Oil and Gas, Refineries, Commercial and Industrial Projects. Applies standard design principles and theories to complete assignments. Util

Lead Instrumentation Technician

Electrical Power Engineer, fresh graduate

Installation, Testing and Comissioning of various SCADA and Telecommunication related equipments

Diploma in Mechanical Engineering with seven years experience of various projects such as: Oil Refinery, Petrochemical and Gas Plant Project, which involves on construction and inspection. wide knowledge on isometric drawing, Piping General Plan, Piping & Instrument Drawing and Process Flow Drawing.

PDMS designer(piping)/engineer

PORT GRATUATE IN CIVIL STRUCTURAL ENG. WITH 3 MONTHS EXPERIENCE ,KNOWN-STAADPRO

Experience in Collection and processing of Ground Control Points data using Geodetic quality GPS receivers and LGO(Leica Geo Office & TGO (Trimble Geomatics Office)

Studies, planning, schedule, reports, follow-up, iInvoices & claims for construction projects (gas plants, pipelines, buildings, others)

Procuring of Electrical & Instrumentation and Mechanical Materials/Equipment (Oil & Gas Projects)

Computer literate (Excel, MS Word, Access, Visual Basic, Power Point, etc)

My Q-HSE management experience spans more than 20 years and includes a broad spectrum from that of worker, public safety officer and emergency responder to educator, consultant and civilian contractor to both construction and general industry clients, including 21 months in Afghanistan.

: Supervising Installation, Inspection, Site acceptance testing & Pre-Commissioning, of various DCS/ESD Systems like Yokogawa Centum CS-3000Series Field bus system, Honeywell TDC-3000 etc. Installation and Pre-commissioning of Fire alarm/Gas detection system Also Responsible for implementation of pr

Graduate Structural E.I.T.

I have 12 years experience as an engineer in mechanical engineering field. I worked last 10 years as a Ship Repair Engineer and Project Engineer. I can undertake full responsibilities and worke idepenerntly in teams. I respect and highly dicipline person.

electrical engineer with 7 yrs experience

Electrical Engineer with exp in consultancy jobs, turnkey jobs, HT/LT works, HVAC works, Bill checking, estimation, preparration of BOQ, electrification, layouts etc

QC senior supervisor engineer - QC senior construction engineer.

12 years in various positions - Planning Engineer, Project Engineer, Construction Engineer, Deputy Manager (Planning & Coordination), Shift in Charge - in Petroleum, Petrochemical and Construction Industries in Oman (PDO Projects) and India.

I’ve total 13 year experience Civil/Structural Field, more than one and half year by using software like PDS and remain in detailing the fabrication drawing by using SDS/2, AUTOCAD and MICROSTATION.I have basic knowledge of PDMS. I have good knowledge of steel and steel connection

Piping Engineer.

Living Quarters, offshore accommodation, modular buildings, upgrades, conversions, new builds

I am a surveyor looking for a rewarding job.

30 years experience in the industry and a seasoned expat, last position held was the turnover coordinator for the Washington Group in Northern Alberta, Canada. Also spent 4 years in Baku, Azerbaijan as the senior electrical commissioning eng.

Project Controls Manager - cost control, scheduling and estimating

Instrument Technician / Qc

Thermo-Energy Engineer

Procurement/ purchasing engineer/Manager

I am an electromechanical engineer and I have experience in power plant and oil refinery

Senior Construction Manager

Geotechnical engineer with international experience

Senior Project Site Manager HVAC - FIRE PEOTECTION - PLUMBING - SPECIAL FITTINGS

Process / Production / Project Engineer (Aluminium Smelter)

Quality Assurance Manager - Civil and Rail Engineering - Contruction site practice N1,N2&N3, Certified lead auditor ISO9001

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out