Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #3087 next resume »»
CONTACT INFORMATION:
View contact information...

EDUCATION
BACHELOR OF ENGINEERING (ELECTRICAL&ELECTRONICS), 1996
Bharathidasan University, TN, India.

PROFESSIONAL EXPERIENCE

JAL international corporation, Projects Division, al-khobar, Saudi Arabia
(GE HARRIS VAR in Saudi Arabia)
Electrical Engineer (2001-Present)

Electrical System Revamping Project (Turnkey), Al-jubail fertilizer Company, Al-jubail
Executed the job with full responsibility for commissioning of 13.8kv Switchgears, 25 MVA Transformer, Associated plant Electrics, 4.3 kV Mcc's, LT Mcc's, all LT motors with new protection.

Improvement of 69 kV power supply to KFIA, Saudi Electricity Company, Dammam.
Involved in erection supervision, testing and commissioning of 69 kV relay and control panels, current transformer, potential transformer, distance protection schemes, transformer protection modification. Schemes

Substation 16 Load Diversion Project, Saudi Aramco, Abqaiq
Currently executing the job, which involves revamping of old Mcc panels, erection, commissioning of New Mcc panel, new protection panel commissioning associated with plant electrics.

Elsytec Engineers and Consultants Ltd, Chennai, India
Grade IV Electrical Engineer (1996-2001)

New CRM project, TISCO, Jamshedpur
(worked for ABB India Ltd.,)
The job involves Erection Supervision, Testing and Commissioning of 33KV Switch Board, SVC Yard, LT Switch Board, LT Motors, Distribution Transformers, MCC Panels, PMCC Panels, MLDB/SLDB Panels, Maintenance and trouble shooting. Of all above equipment till production phase completion.

220/110 KV Sub Station, KEB, Gadag
Executed the Testing and Commissioning Job for Overall 220KV, 110KV Substation switchgears, 100 MVA Transformers, Bus Bar Protection schemes, supervision of distance protection schemes
.
2 x 6 MW Diesel Generator Captive power Plant Chemplast Sanmar Limited, Mettur
The job involves Erection Supervision, Testing and Commissioning of 11KV Switchgears, Power Transformers, Distribution Transformers, Control and Relay Panel, LT Panel Boards, LT Motors, Diesel Generator Relay/Control Panel, AVR Panel

Also involved in synchronization of Diesel Generators, knowledge of Momentary Paralleling scheme, Paralleling of Transformer, all microprocessor& numerical Based Relay testing in various projects both in utility and plant Electric sectors.

PERSONAL PROFILE

Date of birth: 13th March 1975.

Nationality: Indian

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1151 to 1200 of 3123)Go to Search Parameters...
Brief Description
Mechanical Subjects Lecturer & Senior Engineer in an Industrial & Commertial Projects
Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning
Manufacturing Engineering Expert with 8 years of Experience in Tooling / Manufacturing Arena, Post Graduate in Mechanical Engineering & Management
Maintenance, Computer Hardware, Calibration,
Knowledge of design and analysis of steel and concrete structures. Special knowledge of finite element analysis(GTSTRUDL/SAP2000). Experience with all phases of building projects from drafting and design to execution and inspection.
PLANNING , MOETHODS MAINTENANCE ENGINEER
Qualification : Diploma in Civil Engineering, Professional Skills : Planning & execution of works as per the drawings & client/company’s requirement. Quantity Surveying, Billing, Man Management, Material Procurement, Labour control & over all Supervision of work.
Health & Safety Inspections (OSHA, MSDS)
Having more than 8 years of extensive professional experience in project management, construction supervision of internationally aided highway projects including major and minor bridges, cross drainage structural works, assuring the quality of construction as per the approved drawing etc
Pipe design, P&IDs and autocad
I am a licensed land surveyor in the Philippines. I was able to practise my profession for 2 years and 11 months. My experience enhanced the knowledge and skills i learned from my university. I worked well with people and enjoyed getting the work at hand completed.
Electronics engineer with 6 yrs exp.
AutoCAD Designer - Architectural/Structural: Specialist for 2D/Advanced 3D Modeling & Rendering w/ AutoCAD 2007, 2D/Advanced surface & 3D Modeling w/ Mechanical Desktop 2005; Planning and Scheduling w/ Primavera Project Planner, User of Windows XP and NT + Microsoft Office applications
9½ years specialised experience in piping of Petrochemical plants, Refinery & LNG plant Planning, construction and shutdown field in all the phases. The experience includes 3 years in India, 3years in Kingdom of Saudi Arabia, 6 months in Qatar and 3 years in U.A.E
Seeking a challenging assignment as an HVAC Site Engineer/Supervisor, HVAC Draughtsman, Materials Inspection/Material Handling Engineer - have six years working experience in H.V.A.C Industry. Have good communication skills and eager to take up any new challenges.
Professtional for use survey instument
IT Application Support Technician
Civil Site Engineer / Civil Inspector ; Field of Experience:: Onshore Plant, Multistory Building, Shopping Complex, Residential Villas and Landscaping Works, Water & Sewage Pipelines; Qualification:: Diploma in Civil Engineering (1995- 1998); Diploma in Auto CAD 2000, 2D & 3D, Windows, MS Office
Ability to perform Instrumentation Installation, Maintenance, Commissioning & Inspections
11 years expereince in microstation
Im a registered civil engineer applying for the role "Quantity Surveyor / Cost Engineer/ Estimator" with advance skills in Microsoft Excel & Words, PRIMAVERA, MS Projects and basic knowledge in Construction Cost Management.
M.Eng (Canada), Building work, Roads, Construction Management, Piling work, Worked with Local & International Contractor and consultant
Bachelor Degree:B.SC. DEGREE IN APPLIED CIVIL ENGINEERING.
eight years of experience in geotechnical engineering and specialize in foundation investigation and excavation shoring structure. I worked as a geotechnical engineer in Beijing Geotechnical Institute (www.bgi.com.cn) which is the largest geotechnical corporation in Beijing city.
This will serve as a reference to employer seeking a qualified employee to their company.
8 years of working experience in the field of Electrical Engineering with experience in Design and Construction, Testing & Pre-commissioning for Substations, Industrial, High Rise Buildings, and other infrastructure projects.
I am a civil engineer with an MBA degree from Rollins College, Orlando. I have work experience in geotechnical engineering and transportation engineering. Now, i am looking for an engineering job in one of those fields.
Architectural Draughtsman cum Civil Engineer
11 years experience including 5 years in developing countries, in the areas of pavement design, costing, construction using Asphaltic Concrete, sprayed seals, crushed aggregate basecourse, water bound Macadam and concrete, highway maintenance, road asset management
BMSE with TX PE
Detail oriented Construction Project Manager with over 10 years of experience with Federal and Private Contracts
Currently Principal Commissioning Engineer on Gas To Liquids project (Qatar), with 16 years experience in chemical and gas industries as operations technician, supervisor and lead commissioning engineer. Experience includes project work control and management.
Mech Engr + 8 years Experience + Overseas experience + large EPC projects + Techinical advisor
Looking for Jr.Engineer/Technician job
Chemical engineer with twenty four years of total experience in the Oil & Gas, Oil Processing and Petrochemical industries, in project engineering, design supervision, multi-discipline engineering co-ordination, contract management, commissioning supervision and construction management.
I am a civil engineer with 8 years experience with different international organizations.
Education : B E Mechanical Overall experience of 8 years in the field of construction , oil and gas. Exposure to latest technologies in IT industry. Having experience with Sultanate of Oman for two years, dealt directly with PDO.
Testing and Commissioning •Turnkey Projects• Construction Seven years of International engineering experience, with particular emphasis on Fertilizer, Steel, and Power Utilities related projects. Executed more than two turnkey projects as a key member in electrical engineering team
Resume for the post of Planning Engineer
Lead Offshore/onshore Pipeline Systems Project Engineering team
I'm a competent and experienced pressure vessel & heat exchanger design engineer with excellent communication, motivational, organisational and interpersonal skills. An individual who possess a hands-on pragmatic approach to work, able to work alone or as part of a team.
I’m a graduate Civil Engineer with nearly 18 years experience in the Construction of Sewerage, Drainage, Sewage treatment plant, 880 MW, 800 MW Power stations, Major Pumping stations of Sewerage/Drainage/Portable water/ Seawater, Heavy industrial structures, Piling.
Certified welding inspector(aws)
Electrical Engineer-Inspector-Surveyors
SETP WINPCS SYSTEM USING C++ CODES. MODIFY P&ID USING AUTOCAD, SCHEDULE USING PRIMAVERA. GATHER ALL ENGINEERING DATA AND LOAD ALL IN WINPCS BY DISCIPLINE BY SUBSYSTEM.CERTIFY COMPLETED SYSTEM, HANDOVER MECHANICALLY COMPLETED SYSTEM FOR COMMISSIONING. PREPARE ALL HAND OVER DOSSIERS BY SYSTEM.
New Construction Surveys, Surveys on Jack-up rigs, Drill Ships, Semi-submersibles, Tankers, Bulk carriers, Offshore support vessels, Vendor Surveys, Welding and NDT Inspector, presently under training as ISM/ISPS Code Auditor
Engineering CADD Technician
For the past Nine years I have been working as a Land Surveyor, I have acquired persuasive techniques that are needed to become a specialized Land Surveyor for buildings and infrastructure.
Seeking full time position in the field of Structural Engineering and Geotechnical Engineering utilizing my skills in the analysis and design of structures.
I am interested in applying for a position as a Health & Safety Technician. My expertise lies in the design and implementation of safety programs for the Oil & Gas, Mining, and Construction industries as well as Refinery/Power generation facilities.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   [ 24 ]   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com