Resume - CSWIP Senior Welding Inspector

Misco Jobs

Resume #32596

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:

CSWIP Senior Welding Inspector (Grade 3.2), 2003
Certificate No. 9327 (expiry 23-03-2008)
The Welding Institute, Cambridge, United Kingdom

Registered Mechanical Engineer, 1981
Registration No. 21447
Professional Regulations Commissions, Philippines

Ultrasonic Testing, 1995
Certificate No. 127/UT/95
European Marine Contractors Ltd.
NDT Personnel Qualification Certification

Magnetic Particle Testing, 1995
Certificate No. 127/MT/95
European Marine Contractors Ltd.
NDT Personnel Qualification Certification

Ultrasonic Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

Radiographic Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

Magnetic Particle Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

Liquid Penetrant Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

OBJECTIVE:
Growth Potential and career advancement which could benefit the company and myself

WORK EXPERIENCE:

McDERMOTT CASPIAN CONTRACTORS, INC.
Baku, Azerbaijan
July 17, 2003 – September, 2004
Senior Inspector (QC/NDT) A

Azerbaijan Int'l Oil Co.(AIOC)/British Petroleum (BP) Azeri Pipeline Project

Monitored front end activities of the pipelaying of 30 inch and 28 inch pipeline in offshore Baku, Azerbaijan (Azeri Phase 1) on the Caspian Sea including beach pulls were completed for the two lines onboard Pipelay Barge Israfil Guseinov and fabrication of Subsea Spools onshore. Involved in the Welding Procedure Qualification for Azeri Phase 2 Pipeline.

VELOSI / SARAWAK SHELL BERHAD
Miri, Sarawak, Malaysia
August 20, 2001 – October 7, 2002
Senior Engineering Surveyor/Senior Welding Inspector

M1 Platform Hook-UP Expansion Project

Worked as a Senior Welding Inspector on M1 Platform Expansion which involves the strengthening of the 100 meter bridge connecting the Production and Living Quarters Platform to the Riser (drilling) Platform, installation of Extension Panels on both platforms and installation of new piping systems.

Jintan Field Development Project
Involved from the formulation of the proposed Welding Procedure Specification (pWPS), Welding Procedure Qualification Test (WPQT), Welding Procedure Qualification Record (WPQR) and the Welding Procedure Specification (WPS), Welder's Qualification Testing (WQT), review of all pertinent documentation prior to the installation and during the installation stages of the projects.

E11R-B Platform
The work scope consist of installing a 32 inch riser with a external monel coated pipe at the splash zone area

JNDR-A & M1DR-A Platforms in offshore Sarawak area.
The work scope consists of installing a 7.634 km x 24 inch API 5L X65 grade carbon steel pipeline with a internal clad 4mm AISI 316L grade stainless steel between the JNDR-A to M1DR-A installation including risers and expansion spool.
M4 &F23SW Platforms in offshore Sarawak area
The work consists of two gas lines, a 12inch X 7 kilometers and a 14 inch X 10 kilometers, both are internally cladded with 3mm 316L stainless steel including installation of risers, expansion spool and PLEM.
- Witnessed the Welding Procedure Qualification Testing at the Serimer Dasa, Mitry Mory, France Welding Workshop, including the mechanical testing at the Institut De Soudure in France.
- Witnessed the Welder's Qualification Testing at Akra workshop in Seremban, Malaysia and onboard the pipelaying barges (DLB 264 & Kuroshio 2)
- Witnessed the Mechanical Testing of the Manual welding Procedure Qualification at PTS in Singapore.
- Reviewed of QC documentation prior to commencement of the projects.
- Monitored pipelaying activities on board the pipelaying barges.

ANDISON INDUSTRIAL SALES, INC. (Marketing and Sales Department)
Diego Silang St., Batangas City, Philippines
May 1999 to July 2001

VELOSI / SHELL PHILIPPINES EXPLORATION B. V. (Onboard PLV SOLITAIRE)
Alabang, Muntilupa City, Philippines
June 2000 to January 2001
Welding Inspector/Quality Surveyor

Shell Philippines Exploration B. V. is one of the proponents for the development of the Palawan Malampaya Natural Gas Project, it is the largest natural gas find in the Philippines to date and is expected to be on stream by the later part of 2001 and is estimated to produce 2,700MW power from the 3 Power Plants of Sta. Rita, San Lorenzo and Ilijan all in Batangas. The project is estimated to cost US$ 4.5B.

The project will deliver deep water natural gas to power plants onshore via two 30 kilometers, 16 inch inconel internally cladded pipelines thru a platform and thru a 504 kilometers, 24 inch pipeline.
- Maintained awareness of relevant Quality, Health and Safety Engineers requirements which includes proper housekeeping.
- Monitored the pipelaying and other related activities onboard PLV SOLITAIRE, which is a dynamic positional vessel capable of laying more than 7 kilometers of pipeline in a 24 hours period.
- Carried out and documented the visual examination of welding activities as to the conformance or non-conformance with approved standards and criterions.
- Monitored the Qualifications and Testing of other items related to the project.

THERMAL ARC PHILIPPINES, INC (Marketing and Sales Department)
Pelbel Building, 2019 Shaw Boulevard, Pasig City, Metro Manila, Philippines
April 1997 to September 1998

SAIPEM AG / EUROPEAN MARINE CONTRACTORS, LTD (QA/QC Department)
Badenestrasse 15, 8004 Zurich, Switzerland
March 1992 to December 1996
QA/QC Engineer

Worked onboard laybarges Castoro 6, Castoro 2 and SEMAC 1 in the North Sea, Mediterranean Sea, Gibraltar Strait and Irish Channel.

List and location of some of the projects I have worked

ROYAL DUTCH SHELL - North Sea
STATOIL - North Sea
CONOCO - North Sea
TOTAL PETROLEUM - North Sea
RANGER - North Sea
TRANSMED - Mediterranean Sea
NORSKE HYDRO - North Sea
BRITISH PETROLEUM - North Sea
CLYDE PETROLEUM - North Sea
BROKEN HILL PROPRIETARY(BHP) - North Sea
BRITISH GAS - Irish Channel
EUROMAGHREB - Gibraltar Strait

- Maintained awareness of relevant QHSE system requirements.
- Monitored welding operations thru visual inspections upon completion of welding and during repair.
- Reviewed, familiarized and identified all areas of responsibility contained within European Marine Contractors, Ltd. (EMC) quality plans, procedures and relevant client specifications.
- Carried out and documented inspections of welding, including:
- Fit-up, consumable storage/usage and pipe cleaning.
- Observance of welding parameters, reporting adverse trends to production personnel.
- Verified that welders and consumables are qualified/approved for the process.
- Verified weld repairs in accordance with the qualified weld procedure specification (WPS).
- Identified and reported nonconformity.
- Ensured all NonDestructive Testing (NDT) equipment including probes and calibration blocks, etc., is maintained in good working conditions at all times.
- Performed and documented pipe-end NDT (Ultrasonic Testing (UT) and Magnetic Particle Inspection (MPI) for lamination checks following cut-out and prior to re-welding) and informed the appropriate supervisor of the results. Examinations are reported on the correct proforma and presented to QC Supervisor.
- Additional duties within own experience and capability as directed by the QC supervisor.

ENGINEERING & CONSTRUCTION CORPORATION OF ASIA (Industrial Services Department)
Benpres Building, Exchange Road, Pasig City, Metro Manila, Philippines
June 1996 to March 1992
Manager-Industrial Services Department (ISD) (1987 – 1992)

ISD is the Quality Control Quality Assurance Department and is a profit center thus it must earn its revenue by delivering services to the construction department of the Company and to other companies that required its services. The Department is offering all methods of Non-Destructive Testing, Visual Examination and Post Weld Heat Treatment including Preheating Services.
- Managed 15 professionals including supervisors, a warehouseman and a department secretary.
- Was responsible for the Marketing of offered services to various companies including the three largest oil companies, power generators and large construction firms.
- Sustained the needed operating expenses of the Department and contributed largely to the overhead of the Company.

Head-Nondestructive Testing Group (1986 – 1987)
- Managed 10 professionals composed of engineers and technicians in the operations of the group.
- Conducted trainings and seminar to various companies and individuals seeking knowledge of the different aspects of Non-Destructive Testing, which was a revenue generating activity for the Company.
Note: I was seconded to ALKHAJA COOPERHEAT from FIRST HOLDINGS INTERNATIONAL, INC. then transferred to ENGINEERING CONSTRUCTION CORPORATION OF ASIA, the latter two being sister companies.

ALKHAJA COOPERHEAT (NDT Department)
United Arab Emirates
The Sultanate of Oman
April 1985 to April 1986

Administrative Assistant/NDT Inspector (1985 – 1986)
- Performed Non Destructive Testing, i.e. Radiographic, Magnetic, Dye Penetrant and Ultrasonic Testing activities to different clients all over the United Arab Emirates and the Sultanate of Oman
- Prepared the necessary reports and evaluation of the test results
- Maintained and repaired Non Destructive Testing equipment

FIRST HOLDINGS INTERNATIONAL, INC. (Skills Training Center)
7232 Malugay St., Makati City, Philippines
June 1983 to May 1986

Administrative Assistant (1983 – 1985)
The training center has several trainors in the field of Pipefitting, Heat and Ventilation Air Conditioning (HVAC), Welding, Insulation, Electrical and Plumbing.
- Supervised five professional office workers made up of secretaries, clerks, a messenger and a warehouseman.
- Attended meetings with the staff of the Vice President of the Company.
- Prepared all letters and memoranda of the office.

WELLTRADE (Saudi Arabia) LTD (NDT Department)
Mansour St., Al Khobar, Kingdom of Saudi Arabia
January 1982 to March 1983

Senior Radiographic Testing Technician
Reported to the General Foreman.
- Supervise 10 technicians and engineers in the performance of Radiographic Testing in the eastern provinces of the Kingdom of Saudi Arabia
- Performed Radiography on other special projects as required by the Company
- Trained technicians and engineers on the proper safety procedures and operations of Radiography equipment.
- Prepared reports and timesheets for billing purposes clients.

Industrial Inspection (International) INC (NDT & Branches Division)
Pasong Tamo St., Makati City, Philippines
October 1980 to November 1981

Radiographer/Technical Assistant & Training Officer
- Performed Radiographic Testing all over the Philippines.
- Prepared documentation and reports on the results of tests evaluation.
- Led other technicians in the performance of their job.
- Acted as the Radiological Health and Safety Officer of the Company as certified by the Course and Examination given by Philippine Atomic Energy Commission (PNRI now), which I was fifth of the class.
- Trained new employees in the basics of Radiography and safety in the performance of their work.
- Assisted the Division Manager in the preparation of technical matters.

EDUCATION & CERTIFICATION:

Bachelor Of Science in Mechanical Engineering, 1980
Mapua Institute of Technology, Muralla St., Intramuros, Manila, Philippines

CSWIP Senior Welding Inspector (Grade 3.2), 2003
Certificate No. 9327 (expiry 23-03-2008)
The Welding Institute, Cambridge, United Kingdom

Registered Mechanical Engineer, 1981
Registration No. 21447
Professional Regulations Commissions, Philippines

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 3092)

Go to Search Parameters...

Brief Description

I graduated from Texas A & M University with a Master of Science degree in in Civil Engineering with a specialization in Construction Engineering and Management in December 2008 and I have 2 years of work experience in the construction field.

Thirty Eight years in Material Handling, Purchasing, Logistics, Expediting and Management with a record of Reliability and Progressive Advancement. I have handled the entire Purchasing Process for as many as twenty projects at any given time involving m

Energetic and versatile Quantity Surveyor (QS) with proven expertise, working with an International Airport Construction Company.

Site investigation, Design of Foundation, Design of Embankment and Retaining Structures, Slopes Stability, Numerical Analysis, Constitutive Modelling, Contaminated Land Remediation, Ground Work Supervision, Mining Engineering, Total Station and Precise Level Surveying.

Power electrical engineer from Aleppo university

17 year experience in environmental management as Head - EHS and GM (Env. Tech) in large environment consulting and waste management co

Welding inspector with 4 years experience in welding QA/QC

Piping engineer currently working with Bechtel India Pvt Ltd. I am having a 2.6 year experience as piping engineer/ PDS administrator.

Over five years of experience in Environmental Engineering including environmental evaluations, water quality impact analysis, environmental permits and environmental management.

More than 10 years of Information Technology and Customer Services experience, Technical support across multiple industries, including Sales, Transportation, Oil Technologies and Services and Outsourcing Services. An intermediate level in English, effective in formulating and deploying alternative

Work experience in design and Manufacturing industries for 5 Years with Auto CAD 2004, CATIA V5 R10, Matlab, Ansys, Solid works

Diversified: Nuclear Power Clearance /Mechanical/Electrical/Civil/Architectural/GIS Map/Water Design

31 yrs im field. I have ben an Electrical Field Engineer For a long time

I am a GRADUATE MECHANICAL & CERTIFIED COST ENGINEER possessing 20 years of diversified experience in Petrochemicals, Refining, Chemical, Fertilizer, Oil & Gas with various multinational companies in Pakistan, Bahrain & Saudi Arabia in the fields of Project control, Cost & Contract Management, Plant

Construction manager/Chief field engineer with HND Mechancial engineering and Member Institute of Mechanical Engineers. 18 years of construction management experience at all levels.

My key strength includes communication, interpersonal, analytical, creativity, troubleshooting skills and quick problem solving ability. CAD skills include AutoCad, SolidWorks, Catia V5

Production, planning & maintenance (reactive & proactive) of crushing & screeing plant as well as projects execution (have 3 yrs. full time Dip in Mechanical Engg)

I had completed my B.E. & DIPLOMA in mechanical engineering. I followed through 2 major projects, seminar, industrial training, national level paper presentation & visited number of power plants, companies which are specially related with mechanical field.

I am certified by MACS in air conditioning. I have worked on heavy equiptment for three years at Patten Industries. I worked a couple of months at the Mossville Caterpillar plant as a experimental technician. I completed a two year caterpillar base technical program at Illinois Central College.

17+ years contruction electrician foreman, electrical engineering and PLC experience. The majority of which was obtained on high profile DOE contracts; DOE Q cleared; BSEE

Construction/Maintenance Superintndent, Mechanical/Civil fields

Entry Level

1.B.E(Electrical Engineering)from College of EME,(National University Of Sciences and Technology,NUST) 2.CGPA=3.31/4.00(in percentage equivalent to 80.24%) 3.final year project nominated among the best three projects of the electrical engineering department.

Respected Sir, I am a holder of B.S. in Civil Engineering. I seek to have a job as an AUTOCAD specialist/OFFICE Assistant in your reputed firm. I am hence attaching my CV along with this mail.

Project Managements and project designing; Study, dimensioning and amelioration of thermique, hydraulic and frigorific installations; Study and conception of mechanical structures with the help of CAO (Solid works, AutoCAD, Catia...); Maintenance management and stock exchange of tools

Highly motivated, results and detail – oriented professional with 11 years of experience specializing in the Oil and Gas, Industrial, Construction and Residential Industries.

My background encompasses over 10 years working experience in different industries.

Well-rounded professional with 15+ years experience in areas of: Project Management, Operations, Product Development and Engineering

4 Years BE graduate, with 1 Year Diploma Fire safety Engineering, OSHA & Basic Life support train certificates.

Experience in instrumentation and control, P&ID, Wiring Schematic Diagrams, Process Flow Chart, Specifiying instruments, Strong Electrical Engineering Skills, PLC, DCS, MCC, strong analytical skills, stong knowldge in vaious engineering desciplines, microsoft office,

Piping engineer with 10 years experience in oil field. Experienced in designing, supervising and construction of pipelines and piping for oil industry.

I`m willing to relocate and work as QC inspector, Site Engineer in sewer and water treatment field

Experience in using AC Drives, DC Drives, Servos and Stepper Motors Proficient in PLC programming using Allen Bradley, Siemens and Omron PLC Proficient in HMI interfaces including Panelview, Maple, Omron systems Proficient in using RS Logix , Simatic Step-7, Omron CX-Programmer

University graduate with over 6 years of expirience in surveying and geomatics, both in the field and in the office.

I am an Instrumentation & Control Engineer by Profession. Review of my credentials will confirm that I have 15 years of experience in instrumentation, operations, maintenance & design.

Desalination Plant Maintenance/Inspection, Materials Testing, Technical Evaluation,Troubleshooting, Supervisory/Managerial Skills

CSWIP Senior Welding Inspector

Project Controls Specialist, Project Services Manager, Project Controls Manager, Cost Control Manager

Over 20 years experience as Project / Construction Manager on overseas assignments. Extensive experience in pipe design, fabrication and inspection of refineries, LNG plants, chemical plants, power plants, pipelines and mining facilities. After college, started a career as a craft pipe fitter in Hou

Microstation & AutoCAD, Photography, Energy Managment, Mechanical Engineering Technician, Teaching English as a Foreign Language

14 years of diversified project management and controls experience (EPC) in the oil and gas industry (up and down stream). Assignments include: Project Manager, Project Controls Manager, Lead Scheduler, and Lead Cost.

worked in the Middle east on Power plants for 2 and a half years, stat generator sets

Skilled Senior LEVEL II RT Technician with 30 Yrs experience

Having 7 yrs of experience in petrochemical industry as plant operator and commissiong shift leader.

B.E. in Electrical, having basic knowledge in Embedded Systems, Robotics, Matlab, Simulink, Autocad, C++

EDUCATION: „h Govt. Polytechnic, Rajkot D.E. (Civil) WORK EXPERIENCE: „h 6 Year experience as a Site In charge (Construction Project) at Backbone Enterprises Limited, Ahmedabad

Geotechnical Engineer, foundation settlements, reclamation, interpretative and factual report writing

Seeking a responsible and challenging growth oriented position in the field of electrical engineering with emphasis on high voltage out-door substations including its preliminary design, selection of transformers, switchgears and other materials

Civil / Structural Engineer with various international exposure on Power Generating structures, knowledgable with design and detailing software such as StaadPro. and Tekla Structures.

Plant Manager, Quality Manager, Industrial Engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out