Resume - I have followed the four-year degree program leading to the B.Sc Engineering Deg...

Misco Jobs

Resume #32656

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To seek the opportunity to use my knowledge and carrier skills to obtain challenging position that will allow me to expand upon my education and continue to accumulate knowledge.

EDUCATION
G.C.E Advanced Level –1995: -Royal Central College, Polonnaruwa

Graduation (BSc Engineering Degree): –1997-2001, Faculty of Engineering,
University of Peradeniya. Sri Lanka.

EDUCATION QUALIFICATIONS
I have followed the four-year degree program leading to the B.Sc Engineering Degree specializing in the field of Civil Engineering, and have obtained the B.Sc Degree with Second Class Honors (Lower Division) Pass.

Following a Post Graduate Diploma in Construction Management at Open University of Sri Lanka (Distance education Basis)

Final year Project:

Have successfully completed the project on "Impact of drainage water from Walawe irrigation scheme on lagoons at the downstream end of the Walawe river basin" under the supervision of
Dr. K D W Nandalal

PRESENT EMPLOYMENT
Project: Construction & Replacement of railway Bridges (Kelaniya,Ja-Ela,Seeduwa &
Kalutara)
Period: From October 2004
Designation: Planning & Scheduling Engineer

Main Contractor: Waagner Biro Brueckenbau – AG- Austria
Works carrying out:
* Preparing Construction programmes (Master programme & Monthly)
* Progress monitoring & reporting for the project.
* Preparing Monthly Progress report.
* Liasing with Consultant (CECB), Client (SLR), & Civil Contractor (CMLE) & Piling contractor (PORR).
* Design Drawings & Documents handling.
* Preparing Monthly Billing Statements to SLR and Checking & Certifying of Subcontractors monthly billing (CMLE).
* Coordinating weekly progress meetings and preparing minutes.

WORKING EXPERIENCE
1. Project: Panadura – Ingiriya Road Improvement Project
Period: June 2004 to October 2004
Designation: Planning Engineer

Contractor: Nopawong-CEC Joint Venture (Thailand Company)

Works carrying out:
* Preparing Construction programmes for Structures and road works weekly & monthly (using Microsoft project)
* Progress monitoring for the project for road work, structures & general works.
* Preparing Monthly Progress report.
* Liasing with Consultant resident engineer and his staff.

2. Project: Katugastota – Kurunegala, Katugastota – Wattegama Road Improvement Project
Period: November 2002 to June 2004
Designation: Planning Engineer (Planning)
Site Engineer (Construction)

Contractor: China Jilin International Economic & Technical Corporation
Works carried out:
* Preparing Method statements, Construction Sequences, Construction programmes for Structures and road works (using Microsoft project),
* Attending all the Quality Control programmes & seminars on behalf of the contractor.
* Liasing with Consultant Resident Engineer and his staff regarding construction work and planning work.
* Preparing all shop drawings & as build drawing for Structures and road works, and Bar scheduling
* Supervising of Culvert, Bridges, Line drains, Retaining walls, Embankment construction and road base construction, priming, asphalting work and Progress monitoring.
* Labour and Machinery management.
* Engaging in preparation of sub contract bills & Preparation of Interim payment certificate.

3. Project: Colombo Katunayake Expressway Project
Designation: Site Engineer
Period: December 2001 to October 2002
Contractor: Deawoo-Keangnam Joint Venture (Korean company)

This project is the first Expressway project in Sri Lanka and mainly QA/QC based project undergoing many soft ground treatment processes such as PVD (Prefabricated Vertical Drain), SCP (Sand Compaction Pile), SC (Stone Column) and preloading.

Have experience on such
* Soft ground treatment processes and Embankment Construction
* Sand mat construction,
* Bored-Cast in Place Pile construction and testing on pile such as Static load test, Pile integrity test and Pile dynamic load test
* Labour and machinery management.
* Liasing with consultant staff and sub contractors
* Supervising of Sheet piling, Channel diversion, Temporary bridge construction (steel).

TRAINING EXPERIENCE
* Successfully completed three Months of Industrial training at Daya Construction (pvt) ltd. Road Construction & Improvement Project, Galle District, Southern Province Road Development Authority. And have experience in

Edge Treatment
Road base construction and Overlaying
Surface Treatment (SBST & DBST)
Drainage construction

* Successfully completed three Months of Industrial training at Mahanuwara Bus company Ltd, Kandy north

* Worked for the Traffic Survey (interview & counting), which is carried by faculty of engineering, at Kandy city and Kurunegala city.

PROFESSIONAL QUALIFICATIONS
* Associate Member of Institute of Engineers Sri Lanka, (AMIE (SL)- 6623)
* Student Member of Institute of Civil Engineers, U.K. (ICE-60549728)

EXTRA CURRICULAR ACTIVITIES
* Creative participant of the Engineering Jubilee Exhibition 2000 of Faculty of Engineering
* A technical paper on "Impact of drainage water from Walawe irrigation scheme on lagoons at the downstream end of the Walawe river basin" has presented at 95th annual sessions-2001, The Institution of Engineers, Sri Lanka.
* Followed a Module Basis Course on Quality Control Procedure & Preparation of QA/QC manual conduct by Road development Authority & ND Consultant.

COMPUTER PROFICIENCY
Hand on experience in
* Office 2000 software packages (MS Word, Excel) & Microsoft Project
* AutoCAD (2D)
* Engineering software such as "PIN", "EPA –Net",
* Internet/e mail

REFEREES
I solemnly declare that all the particulars given above are true and accurate to the best of my knowledge.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 2856)

Go to Search Parameters...

Brief Description

7 years of experience in the field of design, development, analysis. Design and modeling of Special Purpose Machine, Machine tools & accessories, Dies, Cams, jigs and fixtures etc.

I am looking for a position of Field Engineer, Office Engineer or Quantity Surveyor. I worked with the JBC for a little over a year. I am a very hard worker. I am very proficient at reading spec books and engineering drawings.

Civil Construction Engineer, Construction Superintendent Lead Civil Engineer

My Qualification is at Secondary School, i have 8 yrs of working experience.

Project/Site management with thorough knowledge of Mechanical equipment installing works, pressure parts and piping erection works welding and NDT, Civil Works, Electrical and I&C installing works, QA/QC and HSE procedures

Currently working for Consolidated Contractors International Company, as the QGX II (Qatar Gas Expansion Project II) Deputy Health Safety and Environment Manager and as the HSE Training Manager in Qatar: I am an experienced professional who is skilled in HSE Occupational Health & Safety management

I am Civil Engineer having 9 years experiance in marine works. construction of breakwater, Quawalls installation, boat ramps, shore protection, reclamation and dredging with multinational construction company and consultants. presently working with reputed consutlant in maritime field.

6years experience in the drilling and blasting field. Certified Blaster ISEE Level 2.TSA Homeland Security Clearances. Worked in open pit mines, quarries, construction. Can run up to 10 drills including tamrock( cha1100 & pantera 1500. Willing to relocate.

Total Experience of 15 years, with aprx. 3 years Gulf Exp. The.work.area.includes.Quality-Assurance System. activities, Supporting, metrology, Inspections, Testing Exposure in API, ASME, ASTM stds & Qualified ISO Internal Auditor documentation.

HSE Manager in major energy, power generation, oil and gas sectors covering technical and commercial requirements. With professional experience in directing and mananing health, safety and the environment protection & sustainability development aspects as per OSHA framwork and guidelines. Strong abi

Well versed in Primavera applications (P3,P6, Expedition 10.1); Well versed with SAP PS & MM modules application; Well versed with Cost Engineering/Cost Control applications & processes

Comprehensive knowledge and experience of long distance material handling systems, fixed and mobile plant and associated ancillary equipment

Mechanical engineer with over eight years experience in industrial construction projects

Educational Qualifications: Master of Engineering in Mechanical Engineering specializing in Welding Engineering from Indian Institute of Technology, Roorkee, Uttar Pradesh, India in April 1996 with 74.40%, American Welding Society (AWS) Certified Welding Inspector (CWI) -AWS-CWI Certificate

Result oriented Geotechnical/ Engineering Geologist with 2-3 years onshore experience in ground engineering with keen interest to develope further expertise in the field. Strong analytical and personal ability to problem solving solutions with Civil Engineering Geology knowledge of Construction

More than 30 years of experience in Control & Instrumentation field, out of which 28 years in a leading Engineering Consultancy organization MECON Ltd. (Govt. of India Undertaking) in Steel, Non-Ferrous, Chemical, Petrochemical & Power

PLANNING/SCHEDULING ENGINEER & BACHELOR OF ENGINEERING (CIVIL)

Autocad & Inventor Draftsman

I have 12 years work experience in Civil Engineering Constructions and 4 years experience in Environmental Remediation project for Brunei Shell Petroleum. My Supervisor experience includes execution of structures as per drawings and specifications with skilled group of trade persons and subcontracto

i have done BE in icivil from mehran university of engineering and technology jamshoro.which is ISO9001.i have done intership two times.

You will not find a more qualfied canidate for the position. I have worked in a variety of positions that give me "hands on" experience that cannot be found in a classroom.

BS in Civil Enginerring, took a course in AutoCADD, proficient in Microsoft Office

Junior Engineer, Document Controller, Storekeeper, Technical Assistant,

Qualified and well experienced Piping Engineer; availing in excess of 25 years of experience in the full spectrum of engineering, design, detailing, fabrication, erection, retrofitting, testing, QC, commissioning, maintenance and demolition of Process/Power Plant and Piping.

I have 23 years of experience in a combination of skills including electrical troubleshooting, installations and repairs, PLC programming (AB, GE, Siemens) and installations, HMI programming and installations, Supervision and Project Management.

Certified nace coating inspector cip level2 with 10 years experience in oil and gas

Strategic marketing, business development and executive search professional with strong record of implementing sales and strategic plans that support corporate and financial goals. An effective executive search director & professional.

A highly talented and accomplished Electrical Design Specialist with skills and experience in Electrical and Protection systems for EHV/HV substations (AIS/GIS) and MV Power Distribution systems.

* Exceptionally qualified Professional with more than twenty years of experience as a Field Engineer in the industrial and power industry

Structural Design Engineer with more than three years of experience in the field of design of bridges, underpasses, buildings and other highway related structures.

Bachelor of Civil Engineering from Jawaharlal

Any Job Opportunity in Contract Administration and Quantity Surveying

I would like to associate myself with an organization that provides ample scope to hone my skills and turn into versatile architect.

Structural Engineer with 2.5 year work experience and Master Degree

Quality and Welding engineer with rich experience over 12 years in oil and gas/petrochemical sector for most of years in offshore, I am looking for challenging position in international multi-cultural environment in QA/QC field.

DCS/ESD - DESIGN,FAT,SAT,POWER_UP ,COMMISSIONING,HOT/COLD CUT OVER & MAINTENACNE

Piping and Pipe Stress Engineer with wide range of experience in industries Petroleum Processing, Power, Chemicals, Petrochemicals Polymers and Steel Production. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams

Over thirty-five years experience in electric power utility equipment, SCADA, metering, telecommunications plus project management and international engineering from South America, Europe and Africa.

SKILLED / EXPERIENCED I & C TECHNICIAN, SEEK APPROPRIATE OPENINGS AS LEAD TECHNICIAN/SUPERVISOR

Project engineer-Mechanical, HVAC, Utility equipmets-Operation and maintenance

BE in Computer Engineerng from uet taxila paksitan

Structural Steel & RCC Designs in the fields of Oil & gas, Power, Steel and Aluminum Plants and other Industrial Structures

Hysis, Aspen plus, PRO-II, HTFS, HTRI, Flare net, Auto-Cad & Microstation and APIs, ASME, IS, Ghost Std.

Extensive experience in EPCM projects in mining and petrochemical. Relevant experience in pressure vessel fabrication. Good analytical and negotiating skills: pre-award and claims

I have followed the four-year degree program leading to the B.Sc Engineering Degree specializing in the field of Civil Engineering, and have obtained the B.Sc Degree with Second Class Honors (Lower Division) Pass.

Thirteen years of total experience in Project Engineering, Tendering, Cost Control, Material Procurement, Execution and Supervision of heavy civil and marine construction of seawater power and desalination plants and wharfs/jetties/local fuel oil and lng/ngl terminals.

Experience of 16+ years of rich experience with EPC contracting company in Piping fabrication, erection, hydro testing and pre commissioning activities for Refineries, Oil & Gas plants/facilities, Paper Mill, Water Treatment Plants, Effluent Treatment Plants and Power Plants

Process Engineer / Commissioning Manager

10 Years Experience in Lifting Equipmet Inspection, Maintenance,Trouble shooting and Repairs. Saudi Aramco certified Lifting Equipment Inspector.Diploma In Mechanical Engineering (3Years). ASNT Level II in PT,MT,RT and UT.

I am well proficient in AutoCAD, 3ds Max and Photoshop

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out