Resume - Environmental Engineer/Scientist with over thirty years of experience with proje...

Misco Jobs

Resume #34605

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation

OBJECTIVE:
To use my 33 years of experience with hazardous waste management, site remediation, monitoring, modeling, pollution control, risk assessment, air toxics, permits, environmental regulations, and project management to facilitate cost-effective solutions to environmental problems.

WORK EXPERIENCE:
1994-Present, Cornett Environmental Consulting, Ohio and Virginia CONSULTANT

Provide site investigations, strategic planning, monitoring, modeling, pollution control, risk assessment, regulatory compliance, permit applications, and health and safety programs; evaluate pollution prevention, waste minimization, emergency response, process safety, and site clean-up and closure programs; and coordinate related projects with attorneys and industrial, commercial, and public interest organizations. Coordinate Collinwood Environmental Taskforce.

1992-1994 META, Gaithersburg, MD Senior Environmental Scientist

Principal investigator responsible for baseline and cumulative human health impact assessment for a programmatic environmental impact statement for the U.S. Department of Energy Environmental Restoration and Waste Management Programs. Wrote risk assessment software and evaluated risks posed by DOE installations. Wrote sections of environmental impact statements and associated implementation plans. Evaluated risk assessment, risk communication and waste management methods. Summarized regulations and risk management guidelines. Evaluated waste management and remedial action alternatives. Provided and evaluated emission factors. Drafted technical directives for DOE National Labs and contractors. Evaluated and wrote work plans and proposals. Reviewed technical reports and draft EIS text. Participated in and summarized meetings. Reviewed waste management technology and associated pollution control systems. Identified and recruited experts to help with project. Provided expert testimony in related hearings and litigation.

1987-1992 Resource Applications, Inc., Burke, VA Senior Environmental
Engineer / Manager

Project manager for remedial investigations, feasibility studies and environmental compliance audits at Superfund sites contaminated with herbicides, halogenated solvents, PCBs, oil, fuel, heavy metals, dioxins, asbestos, etc. Wrote baseline risk assessment reports, health and safety plans, and field operations plans. Sampled soil, groundwater, surface water, underground storage tanks, and air toxics. Performed split sampling, arranged for analytical services, and audited remedial action implementation. Created software for modeling and modeled contaminant transport through soil, groundwater, surface water, and the atmosphere, along with associated risks to human health and to the environment. Project manager for and wrote most of U.S. EPA report: Risk Characterization for Site and Situation Assessment, an analysis of Superfund risk assessment methods, uncertainties, policies and decision analytics. Served as Health and Safety Officer. Wrote key sections of U.S. Army Toxic and Hazardous Material Agency Health and Safety Program Manual on hazardous waste operations, risk assessment, radiation safety, drilling safety, monitoring, etc. Wrote and reviewed proposals, work plans, and potentially responsible party (PRP) reports. Designed and wrote specifications for Ft. Detrick hazardous waste and material storage facilities. Wrote O&M manual for new sludge thickeners, evaluated submittals, audited system installation and startup, and tested and approved instrumentation and controls. Zone Program Manager for 21 person Technical Assistance Team providing U.S. EPA with air toxics modeling, risk assessment, CERCLA and RCRA corrective measures studies, chemical safety audits, SPCC investigations, project scheduling, deadline tracking, and emergency response planning, training and program evaluation.

1986-1987 Engineering-Science, Fairfax, VA Senior Engineer

Principal Investigator for the EPA Background Information Document for the Development of Regulations to Control the Burning of Hazardous Waste in Boilers and Industrial Furnaces, Volume III - Risk Assessment. Performed risk assessments and wrote detailed procedures for monitoring and for emergency response during remedial actions at three uncontrolled hazardous waste sites. Provided evidence and expert testimony for litigation. Helped write EPA procedures for dioxin monitoring. Performed quality assurance on hazardous waste trial burn monitoring for EPA.

Claude Lawrence Cornett, Jr. - Page 2
1985-1986 Rust International Corporation, Birmingham, AL Staff Engineer

Wrote "environmental compliance handbooks" for refuse fired furnaces and power plants. Summarized regulations and permit requirements. Provided detailed procedures for monitoring, pollution control, inspections, record keeping, and permit renewal. Evaluated trial burns and calculated enrichment and emission factors. Wrote detailed specifications for instrumentation, automated environmental data processing, scaffolding, sampling ports, and environmental testing services.

1981-1985 Consolidated Edison Co. of New York Environmental Engineer

Performed dispersion modeling and wrote sections of environmental impact statements and testimony on toxic air pollution emissions and impacts. Filled out permit applications and automated associated procedures. Performed and coordinated environmental compliance audits and designed and coordinated environmental monitoring and receptor modeling programs. Drafted corporate environmental policies and procedures. Provided procedures, technical advice and training to power plant personnel for implementing compliance policies. Wrote and reviewed specifications for pollution control equipment, coal cleaning, environmental monitoring, modeling, record keeping and consulting services.

1979-1981 Monsanto Research Corporation, Dayton, OH Research Engineer

Wrote Volume V of EPA NPDES Treatability Manual. Summarized regulations and wrote guidelines for risk assessment and for permit application review in draft EPA Permit Writers' Guidelines for Hazardous Waste Incineration. Summarized trial burns and wrote sections of EPA Engineering Handbook for Hazardous Waste Incineration. Performed pre-test surveys, designed experiments, coordinated process and environmental monitoring, and wrote emission test reports for EPA. Summarized RCRA, TSCA and other regulations and evaluated cost and availability of equipment and services to comply. Designed a trial burn facility, drafted RCRA Part B permit applications, and modeled impacts of toxic substance emissions.

1976-1979 Dalton.Dalton.Newport, Shaker Heights, OH Pollution Analyst

Provided air pollution and noise modeling, summarized regulations, and wrote sections of environmental impact statements. Evaluated risk assessment methods and wrote DOE and EPA guidelines for monitoring and modeling toxic pollutants from advanced energy technologies and associated environmental impacts. Wrote U.S. DOT guidelines for air pollution & noise monitoring and impact assessment. Wrote detailed specifications for pollution control, monitoring systems and services.

1972-1976 Cleveland Division of Air Pollution Control Pollution Control Engineer

Supervised up to twelve technicians performing ambient air pollution monitoring. Worked with NASA on environmental toxics monitoring, risk assessment, and receptor modeling. Evaluated dispersion modeling and emission monitoring. Investigated complaints, gathered evidence, and prepared and delivered testimony.

1971 Bartlett-Snow, Inc., Cleveland, OH Technician

Operated, maintained, and measured emissions from rotary kilns, calcination equipment, fluidized bed reactors, and hazardous waste incinerators. Calibrated, operated, and maintained emission and process monitoring equipment.

EDUCATION
M.S. Air Pollution Control Engineering, University of Cincinnati, 1972
B.S. Physics, Purdue University, 1969
OSHA 1910.120 40-hr Hazardous Waste Site Worker Protection and 8-hr
Supervisory HAZWOPER Training
American Management Association Supervisory Management Training
Microsoft Office Pro, Advanced Visual Basic, SQL, UNIMAP, TRC, HIWAY, IRIS,
RADTRAN, CALINE, MEPAS, Java, JavaScript, HTML, Fortran, MS FrontPage,
Lotus, WordPerfect, Dreamweaver, E-Commerce, CGI, PERL
DOE Environmental Risk Management, Regulation, and Modeling
DOE Risk Communication
Cleveland Engineering Society Industrial Noise Control
EPA Technical Systems Audit
DOE Risk Assessment Model Review
EPA Air Pathway Analysis at Hazardous Waste Sites

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 2819)

Go to Search Parameters...

Brief Description

site engineer for a land development project that covered earthworks and HE utilization, roadworks, driange, waterline and housing projects on mass housing and medium scale units

i have passed Degree(B.E.) in mechanical engineering with spl. in welding technology and now i am working as a welding engineer in boiler making company from 2 and half year. my job profile is making WPS,WPQ,PQR, TDC, and shop floor inspection.

MECHANICAL ENGINEER WITH EXPERIENCE IN DESIGNING

Nace level 3 coating inspector, CINI certified insualtion inspector & Chartek certified fireproofing inspector.

A Wide experience in drafting in major of civil works, structural, mechanical, Piping & Instrumentation and architectural drawings, 8 years of overseas experience,Overall 15 Years of working experience in civil, structural, mechanical, piping, and architectural firms

More than 13 years post qualification experience out of which 7 years in Occupational Safety and Health, (4.5 years in oil and gas sector) interested in the development of modern techniques in the construction and oil field industry

Electrical Engineer ( project & design) with more than13 years of experience with MNC in India, Japan , Middle East for Oil and Gas, Petrochemical, Chemical, Power.

PROFILE: Proficient in shuttering works, Steel reinforcement & fabrication, pipe fittings

I am a Senior Planner/ Project Controller with certified versatile capabilities and experiences in different fields of construction, including, but not limited to, Building construction, massive civil work, industrial construction, petrochemical construction, commercial complex and high rise buildin

Having six years of experience in managing various geotechnical projects with expertise in planning and execution of geotechnical investigations for mega industrial project sites incorporating all significant aspects.

have skills and knowledge in science information technology and industrial engineering.

Mechanical Enginner with two years experience in designs for commercial, domestic and retail buildings specialising in HVAC, water supply and waste reticulation.

Engineering experience of construction projects; piping system and water resources

Experienced equipment manager with earthmoving, material handling equipment, and cranes.

I am a Mechanical Engg graduate, with 9 years experience in various projects, out of which 7 years at Jacobs H&G Private Ltd. (an associate of Jacobs Engineering. Inc. USA), in ISO 9001 environment.

An Engineer with business acumen, client awareness, practical skills, overseas experience and sound engineering knowledge.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

Geotechnical Engineer working in design, planning, technical follow, contract administration, reporting, financial studies and cost control of underground works such as DW, Piles, Grouting, Tunnelling, Dewatering.

Onshore drilling HSE Advisor

I am currently transitioning out of the U.S. Army. During this time, I have acquired extensive knowledge of electronics and electronic systems

I have 21 years of professional experiences with several EPC Companies (Snamprogetti, ABB, Technip and etc.) and Clients (AGIP, CHEVRON) overseas in Civil Construction / Project Management Team.

Structural design

I have 8+ years in surveying including construction, boundary, topo, ALTA, environmental, and other special surveys. I have managed and trained field crews. I am proficient with GPS and robotic total stations. I have experience with CarlsonSurv2007, AutoCad LDD 2002-2006, LGO, and TGO.

I am a geologist with at 13 years experience in different fields of engineering geology. I have involved in different engineering geological and geotechnical studies of major infrastructures such as dams and tunnels. I am dynamic and motivative and wish to improve my knowledge in geotechnic

Quantity surveying and set work shop drawing

Field service, strong troubleshooting skills, electrical/electronic

Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation

Mechanical Engineer with 3 years of experience in electrical instalations

Summary of Qualifications. Eighteen years of documented success in the design, oilfield and construction industry. ·Experience on project and design working extensively with the Designers and Engineers.

Senior Electrical/Design/Project Engineer for HV and MV substations

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

About eight years of solid experience in designing and implementation(execution) of structural works

Experience in Construction of Power House, Highway Roads, Highrise Buildings, Canals, Air Ports, Aero Bridge, Delhi Metro Rail, Commercial and Residential Multi Story Buildings, Water Tank, Guest House, Domes. Familiar with ISO 9001, ISO 14001 and Safety systems.

Recently I have completed a BSc. in Mechanical Engineering at the Near East University, graduating in 2008, Cyprus.

Fresh Graduate. Civil Engineer. Interested in construction management and structural enginnering.

Proe, autocad.

Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project.

Reinforced Concrete, Steelwork, Structural Timber, 3D structural Modelling

Chemical Process Engineer,Simulation Design, Process Control Automation,Project Development-Conceptual,Feasibility,FEED,Project Mgr,Coordination_EPC,PMC,Licensor,investors;techno economic financial analysis,Mid Downstream Refining, Petrochemicals,Gas Processing/Treatment,Q-HSE,Business Head (P&L)

Construction Manager - Worked as Architect, Interior Designer and Civil Engineer

Application for the Post of Structural Designer/Project Engineer for building structures in your esteemed Company or for any position applicable to my qualifications.

AutoCAD Operator

16 years in Planning/Scheduling/Project Controls for Power/Waste Water/Mining & Metals/Oil, Gas and Petrochemicals projects from concept to commissioning, particularly in multinational, multi cultural and consortium environment in India, Indonesia, Saudi Arabia, USA, Singapore, Bahrain and Canada

I am holding B. Sc in Quantity Surveying from University of Moratuwa, Sri Lanka. I have over eight years employment in the construction industry as a Quantity Surveyor. Employed by International Contractors

Have experience Road Design, MXROAD Software and AutoCAD Software. Total experience 7 Years 11 months in Road Department.

Mechanical Subjects Lecturer & Senior Engineer in an Industrial & Commertial Projects

Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning

Manufacturing Engineering Expert with 8 years of Experience in Tooling / Manufacturing Arena, Post Graduate in Mechanical Engineering & Management

Maintenance, Computer Hardware, Calibration,

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out